ПрАТ ТМЗ

Condition: good (used), functionality: fully functional, Year of construction: 2015,

Condition: good (used), Year of construction: 2001, total length: 7,150 mm, total width: 2,550 mm, total height: 2,670 mm, Welfit Oddy 20FT tank container swap body 31,050 L / single-compartment IMO-1, T7 L4BN Bottom discharge Steam heating Insulated Payload: 32,020 kg Design temperature: +130°C 5Y/CSC inspection valid until 08/2027 = More information = General information Year of manufacture: May 2001 Model year: 2001 Weights Tare weight: 3,980 kg Payload: 32,019 kg Rsdpfoyyxapsx Abker Gross vehicle weight: 36,000 kg Functional Cargo compartment volume: 30,850 l Superstructure brand: Van Hool 20FT TC 30,850L, L4BN, IMO-4 Number of compartments: 1 Condition Technical condition: good Visual condition: good

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 6,941 kg, axle configuration: 3 axles, first registration: 01/2019, total length: 13,600 mm, total width: 2,480 mm, suspension: air, color: white, Year of construction: 2019, Equipment: full service history, power assisted steering, Technical specifications Axeles producer - SCHMITZ ROTOS Air suspension SCB sliding roof, Sliding roof also sliding to rear 2 plastic toolbox with cover holder, sleeves and drawer behind the units 8 Rows Wooden rigging boards Rodpfx Aeyyxaijbker EBS 2S/2M, with roll stability program ROTOS SCB running gear (disc brakes) Bolted basket-type spare wheel holder for 2 spare wheels behind unit Anti-theft rope through the curtain buckles+holder on front bulkhead 6 tyres - 385/65R22.5 (11.75x19.5) Internal Length/width/heigth - 1362 cm / 248 cm / 283 cm Payload - 28 300 kg Gross weight - 39 000 kg Total tare weight - 6692 kg 3 axles Lashing holes starting in the outer frame beginning from the first side post Pallet stop straight, on both sides on outer frame 19 mm high 4 pairs ferry hold shakles 2 wheel chocks with holders Load securing: Body cert. acc. To EN 12642 XL Full height ALU double hinged door double integral lock rods 28 mm phenolic plywood floor, max 7100 kg forklift axle load tested to DIN EN 283

Condition: good (used), axle configuration: 3 axles, first registration: 03/2019, total width: 2,550 mm, total height: 1,750 mm, suspension: air, tire size: 385/65R22.5, color: black, Year of construction: 2019, Axle configuration Tyre size: 385/65R22.5 Make axles: Renders Rjdpfxjyyxaco Abksr Rear axle 1: Max. axle load: 9000 kg Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 5.600 kg Carrying capacity: 33.400 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OV-04-ZB = Additional options and accessories = - Air suspension - Disc brakes - EBS - Extandable - Lift axle - Twist-locks

Condition: ready for operation (used), Year of construction: 2012, Panel saw manufactured in 2012. This SCHELLING FH 4 features a nominal cutting length of 4250 mm and a maximum saw blade diameter of 350 mm. It offers a feed speed of up to 80 m/min and is equipped with an ARDIS software package for enhanced functionality. Includes a storage grundner. If you are looking to get high-quality panel cutting capabilities, consider the SCHELLING FH 4 machine we have for sale. Contact us for further details. Panel dimensions • Length: 2000–4100 mm • Width: 300–2100 mm • Thickness: 6–60 mm • Panel thickness tolerance: -0.2 to +0.2 mmMachine specifications • Nominal cutting length (Saw Machine 430): 4250 mm • Main saw blade diameter (max): 350 mm • Scoring saw blade diameter: 300 mm • Max saw blade clearance above table: 95 mm • Max package height: 80 mm • Strip aligner alignment force: 400–2000 N/piece • Max clamp opening: 90 mm • Working height: 970 mm • Overall height: 2070 mmDrives and speeds • Main saw motor power: 15 kW Rsdpfxjyyw U Ss Abksr • Saw unit feed speed (forward): 5–120 m/min • Saw unit feed speed (reverse): 120 m/min • Feed speed (forward): up to 80 m/min • Feed speed (reverse): up to 80 m/min Additional equipment • Panel storage system (Manufacturer: Grundner) • Length: 24.90 m • Width: 14.17 m • Stack height: 2 m • Lifting height: 2.10 m • Max panel size (L x W): 4.20 x 2.10 m • Min panel size (L x W): 1.80 x 0.60 m • Max lifting capacity: 250 kg • Horizontal drive power: 2.2 kW • Horizontal travel speed: approx. 120 m/min • Vertical travel speed: approx. 40 m/min • Panel material: suitable for vacuum gripping technology • Connected load: 6 kW • ARDIS software package

Condition: used, mileage: 62,284 km, power: 85 kW (115.57 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,450 mm, first registration: 07/2018, fuel tank capacity: 80 l, CO₂ emissions: 162 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 1, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, cruise control, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, power assisted steering, sliding door, General information Number of doors: 5 Model range: May 2016 - Aug 2019 Cab: single Technical information Torque: 280 Nm Number of cylinders: 4 Engine capacity: 1.956 cc Transmission: 5 gears, Manual gearbox Top speed: 143 km/h Measures length/height: L2H2 Dimensions (LxBxH): 554 x 205 x 252 cm Weights Empty weight: 1.885 kg Carrying capacity: 1.615 kg GVW: 3.500 kg Max. towing weight: 2.000 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 6,2 l/100km (46 MPG) Maintenance, history and condition Service history: Present APK (MOT): tested until 12/2026 Number of keys: 2 (1 hand transmitter) Financial information Ask for the financial lease options Product safety Manufacturer: Mazeland Automotive Ekkersrijt 2008 5692BA SON EN BREUGEL, NL = Additional options and accessories = - Driver's airbag - Electrically adjustable door mirrors - Electrically operated front windows - Front central armrest - Heated door mirrors Rjdpfx Ajyyw U Ejbksr - Height adjustable driver's seat - Height adjustable driver's seat - Immobiliser - Loading floor - Lumbar support - Multifunctional steering wheel - Panelling - Partition - Rear doors - Remote central locking - Reversing camera - Sliding side door right - Telephone enabled with Bluetooth - Third brake light

Condition: like new (used), Altendorf F35 panel saw, like new Carriage: 320 cm, Blade tilt 0-46° and motorised blade height adjustment, Right-side rip fence motorised, adjustable up to 1040 mm, Two-axis scoring unit, electrically adjustable with LED illumination Main motor 5.5 kW; 3 cutting speeds Max blade diameter: 450 mm, Movable arm for easy disassembly of the crosscut table Rjdeyyw Uropfx Abksr Front support roller dedicated for cutting longer workpieces Year of manufacture: 2025 Ex-demo machine, condition as new

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Rjdpsyyw Ufofx Abkor Further technical details will follow in the next few days...

Condition: new, Year of construction: 2026, functionality: fully functional, AM-20 Laboratory/Pilot Extruder with Wide-Slot/Film Die and Calender Unit Compact, vertical laboratory and pilot extruder AM-20 suitable for processing various plastics such as PP, PE, PS, ABS, PVC and other plastic granulates. The machine is equipped with a wide-slot die/film die, making it ideal for film extrusion, material testing, color and mixing trials, as well as development applications in laboratory and pilot plant environments. Additionally, calendering equipment is included, as shown in the photos. Technical data: • Model: AM-20 Rjdjyyw T Uepfx Abkjr • Voltage: 110 V / 220 V • Input voltage: 2 x 220 V • Power: 1000 W • Screw diameter: 20 mm • L/D ratio: 15:1 • Throughput: approx. 500–1000 g/h • Dimensions: 45 x 25 x 60 cm Suitable for: • Film extrusion • Laboratory and pilot-scale trials • Material development • Color and mixing tests

Condition: good (used), Year of construction: 2004, Used Edgebanding Machine Model: Hebrock AKV 3005 DKF Year of Manufacture: 2004 Direct glue application onto the workpiece Includes jointing unit Edge material magazine divider High-frequency cross-cut saw Chip collection box (cross-cut saw) Pneumatic roller end trimming Control panel, PLC control system Transport chain with fixed, special chain plates Double roller top pressure (ball bearing mounted) Outrigger (extendable towards the front) Automatic central lubrication (cross-cut saw, corner rounding unit) Quick heating glue pot (maintenance-free, Teflon-coated) Maintenance- and operator-friendly design Corner rounding unit Profile scraping unit Surface scraper Chip collection box (scraping unit) Max. edge thickness: 3 mm Min./max. workpiece thickness: 10 / 40* mm Min. workpiece length: approx. 200* mm Min. workpiece width: approx. 70* mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Max. total connected load: 12 kW Electrical connection: 400 V / 3 Ph / 50 Hz Dimensions (L x W): 5000 x 1445 mm Redpfx Absyyw Tzokjr Height: 1620 mm Weight: 1400 kg

Condition: good (used), functionality: fully functional, machine/vehicle number: WMA14DZZ3PP228113, mileage: 1,49,901 km, power: 162 kW (220.26 HP), first registration: 03/2024, fuel type: diesel, empty load weight: 5,950 kg, maximum load weight: 6,040 kg, overall weight: 11,900 kg, tire size: 265/70 R 17.5, tire condition: 80 %, axle configuration: 4x2, wheelbase: 5,200 mm, next inspection (TÜV): 05/2026, fuel: diesel, fuel tank capacity: 180 l, brakes: engine braking, color: silver, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, AdBlue, additional headlights, air conditioning, cable winch, central locking, cruise control, differential lock, electric window regulation, onboard computer, parking heater, soot filter, traction control, trailer coupling, our vehicle number #30805 L cab Euro VI 220 HP 4x2 Wheelbase 5,200 mm Engine brake Parabolic suspension (BL) Tire size 265/70 R 17.5 Tank capacity 180 liters Gross vehicle weight 11,990 kg Payload 6,040 kg Unladen weight 5,950 kg Differential lock TipMatic transmission Air conditioning PTO (Power Take-Off) Disc brakes Auxiliary heater Cruise control Traction control MAPOL fixed platform 5,000kg Electric winch Manual winch displacement Warning light bar 2x toolboxes Rodpfx Aoyyw Tusbkor LED headlights Hill-start assist ACC Adaptive Cruise Control Radio/DAB/Bluetooth On-board computer Multifunction leather steering wheel Sun visor Tow bar - ball head Driver's air-suspended seat/heated Passenger's air-suspended seat Roof hatch Central locking with remote Electric windows, dual Electrically adjustable/heated external mirrors Fog lights front Fog lights rear Cornering lights 1x sleeper berth Financing available on request!!!

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, RMGT 790ST-4 Year 2016 4 colors SAPC, Matic, paper size preset, S type, size 600x788 mm, all wash-ups, chromed impression cylinders. Rsdpfeyyw Tnjx Abkjr

Condition: used, This listing is for the Thermo Scientific 600V TSX Series Ultra Freezer The unit is in full working condition and ready for immediate use Designed for dependable ultra-low temperature storage, this freezer offers energy efficiency, advanced temperature control, and reliable performance for laboratory and research environments. Transparency Report and Technical Audit: • Source Pedigree: Biotech / Research Facility Rjdpfeyyw Tbox Abkor • Condition: Direct-from-Bench (Decontaminated/Original) • Power-On Test: Verified; Digital display active, lighting operational, and fan system engaged. • Integrity: 100% Original Parts (Non-Refurbished) Software and Media Disclosure: As a Direct-from-Lab asset, any original software media or accessories found with the unit are included as a courtesy. Licensing Notice: We do not provide, transfer, or guarantee software licenses or keys. The buyer is responsible for all software licensing, registration, and workstation compatibility via the manufacturer. Notice for Procurement: This unit is sold As-Is. While we verify the power-on status and physical integrity, we do not perform analytical validation, fluidic testing, or operational calibration. Ideal for labs with in-house technical expertise or existing service agreements. Sustainability Impact: By choosing Direct Reuse, your facility avoids the carbon footprint of new manufacturing and prevents specialized materials from entering waste streams. Direct-to-Lab reuse is the most carbon-efficient way to equip a modern laboratory.

Condition: excellent (used), ELECTRONIC (CNC control) machine, Numerical Control Type NC 500 - Software Tooling System N. 2 Through-feed motorized conveyoring belts - Feeding speed (m/min) 35 - 75 ca. Max. working width (mm) 3200. Min. working width (mm) 215 Rodpfjyyw S Rsx Abker N. 2 Horizontal units/supports N° 2 Drilling heads for each horizontal unit (11 Spindles for each horizontal drilling head) N. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 x HP 1,8 N. 2 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 x HP 1,8 N. 4 Vertical top pressure clamps - N. 2 Motorized endless screws to evacuate wastes/chips Quota (axes) digital display. Total installed power (Kw) 62,7 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the vertical movement (Hv) of the 2 horizontal units The CNC controls the movement (X axe) of all the vertical units The CNC controls the movement (Y1 and Y2 axes) of the boring heads The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the pressure clamps The CNC controls the movement (X axe) of the conveyor belts The CNC controls programming of the working cycles

Condition: excellent (used), machine/vehicle number: WMAH39ZZ87M481962, mileage: 6,62,902 km, power: 324 kW (440.52 HP), first registration: 05/2007, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, Year of construction: 2007, Equipment: ABS, central locking, crane, cruise control, trailer coupling, = Additional options and accessories = - Gullet - Leaf spring - limited slip differential - PTO - Remote central locking - Sun visor Rsdpfjyyw Swox Abkjr = Remarks = WMAH39ZZ87M481962 = More information = Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 16.610 kg Carrying capacity: 15.390 kg GVW: 32.000 kg Functional Crane: HIAB 166 E-3 HIPRO, year of manufacture 2005 Make of bodywork: HIAB 166 E-3 HIPRO Condition Technical condition: very good Visual appearance: very good Financial information Price: On request Identification Registration number: 1FJQ308

Condition: used, mileage: 2,77,026 km, power: 132 kW (179.47 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,520 mm, first registration: 03/2020, CO₂ emissions: 282 g/km, emission class: euro6, color: white, number of seats: 3, number of previous owners: 2, Year of construction: 2020, Equipment: ABS, air conditioning, airbag, immobilizer system, tail-lift, traction control, = Additional Options and Equipment = - Passenger airbag Rsdpfx Abeyyw Sksksr - Roof rails - Third brake light - Driver airbag - Tinted windows - Wooden paneling - Air conditioning - Multifunction steering wheel - Immobilizer = Additional Information = General Information Number of doors: 2 Model range: Jan. 2020 - Dec. 2023 Cabin: single Technical Information Torque: 430 Nm Number of cylinders: 4 Engine displacement: 2,998 cc Transmission: 6-speed manual Dimensions Length/Height: L3H2 Dimensions (L x W x H): 859 x 230 x 285 cm Weights Unladen weight: 2,268 kg Payload: 1,232 kg Gross Vehicle Weight: 3,500 kg Interior Interior color: black Consumption Average fuel consumption: 8.18 l/100km Urban fuel consumption: 9.19 l/100km Extra-urban fuel consumption: 7.59 l/100km Product Safety Manufacturer: IVECO Schouten Used B.V. / Altena Trucks B.V. Almweg 4 4286LG ALMKERK, NL

Condition: excellent (used), Numerical Control Type NC 400 Deluxe Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 1 Splindles for each horizontal drilling head (N°) 20 Rodpfx Aboyyw Sdjkjr Max. working width (mm) 3200 Min. working width (mm) 205 (ca.) No. 5 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 2 Top vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 Vertical top pressure clamps (N°) 4 Transport belts to evacute chips (wastes) (N°) 2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (Y axe) of the stops The CNC controls the movement (X axe) of the conveyor belts Total installed power (Kw)

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, container length: 20 ft, color: blue, machine/vehicle number: 022499722, Equipment: bathroom, hot water, lighting, shower, Equipment: 6 pcs. wall reinforcement 2 pcs. sanitary windows with tilt fittings Parapet height: 1,525 mm above finished floor level (FFL) Frame external dimension: 652 x 714 mm Clear window opening: 590 x 528 mm Insulating glazing with gas fill 1 pc. steel external door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm Outward opening 1 pc. door stopper Partitions: 2 m interior partition wall Without insulation Coated steel sheet, 0.5 mm, color: white (approx. RAL 9010) Rjdpfxjyyw R Hj Abksr 1 pc. internal door Construction dimension (width): 875 mm Clear passage width: 811 mm Clear passage height: 2,065 mm 5 m WC partition wall 3 pcs. WC partition doors, 625 x 2,000 mm Electrical Equipment: 3 pcs. single socket outlet 1 pc. single socket outlet, 350 mm above finished floor level (FFL) 1 pc. double switch 1 pc. double switch Moisture-proof electrical installation 1,150 mm above finished floor level (FFL) Sanitary Equipment: 2 pcs. ceramic hand basins, 500 x 410 mm Incl. single-lever mixer tap Incl. metal mirror Incl. metal hooks Incl. soap dish 3 pcs. WC cubicles incl. toilet and toilet paper holder 2 pcs. floor drains 2 pcs. GRP shower cabins Incl. single-lever mixer tap Incl. shower curtain 1 pc. 300-liter boiler 1 pc. pressure reducing valve 1'' Heating, Ventilation, Cooling Equipment: 3 pcs. exhaust fans, 170 m³ 2 pcs. 2 kW fan heaters

Condition: new, * IMMEDIATE AVAILABILITY * Including drive-on ramp / mesh extension / lashing rings Technical data: Rodpfx Aboyyw Ryokjr • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE! • Permissible total weight: 2000 kg • Unladen weight: approx. 450 kg • Payload: approx. 1,550 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall exterior dimensions: 395 x 192 x 152 cm (L x W x H) • Loading edge height: approx. 52 cm • Tyres: 13” steel wheels • Brake: yes • Jockey wheel: yes • 100 km/h approval: for additional charge • Including vehicle documents Superstructure: • Floor: Wood, 15 mm phenolic plywood • Sidewalls: Steel • Sidewall height: 39 cm • Chassis: Low-loader, rubber torsion axle • Folding sidewalls: Large drive-on ramp at the rear • Hydraulic system: no • Overrun device & brakes: Knott • Frame/chassis: V-drawbar • Extension: Mesh extension included in price • Locks: Over-centre latch • Lashing eyes: 6 recessed in floor • Supports: available at extra cost • Electrical connector: 13-pin • Registration: ZBII & CoC documents Standard equipment: • Galvanised steel side panels • Rear sidewall foldable • Wooden floor • Corner stanchions with insertion options for extensions or mesh • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal recessed lashing rings in the floor • Rear access ramp • Over-centre latch • Removable mesh extension • Tarpaulin buttons for cargo net or flat cover • Overrun brake by Knott • Automatic reversing system • Sturdy V-drawbar • 13-pin connector • Reversing light • Large dimensioned safety lighting • Integrated rear fog lamp • Rear frame integrated lighting • Registration documents: Vehicle registration certificate (ZBII) & CoC documents Optional accessories - inquire for details: • Perforated railing on sidewall • High front mesh • High cover • Sideboard extension • Spare wheel • Storage box • Rear support legs • Ramps • Flat cover • Additional lashing eyes • Slotted-hole rails for lashing straps & load bars • Rubber-coated lath strips for lashing straps & load bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are copyright protected! Trailer Centre BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been a specialist dealer & repair workshop for over 30 years for Brian James / Blyss / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes and prior sale excepted -

Condition: new, * IMMEDIATELY AVAILABLE * Including mesh extension and lashing rings. Technical data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATELY! • Permissible total weight: 2,000 kg • Unladen weight: approx. 350 kg • Payload: approx. 1,650 kg • Internal dimensions: 255 x 145 x 39+53 cm (L x W x H) • Overall external dimensions: 395 x 192 x 92 cm (L x W x H) • Loading height: approx. 52 cm • Tyres: 13 inch steel rim • Brakes: yes • Jockey wheel: yes • 100 km/h approval: available at extra cost • Including vehicle documents Vehicle specification: • Floor: Plywood, phenolic resin coated, 15mm • Side panels: Steel • Side panel height: 39 cm • Chassis: Low loader, rubber suspension axle • Foldable side panels: rear • Hydraulics: no • Overrun device & brake: Knott • Frame/chassis: V-shaped drawbar • Extension: Mesh extension included in price • Latches: Lever latch • Lashing eyes: 6, recessed in the floor • Support legs: available at extra cost • Lighting plug: 13-pin • Registration: ZBII & COC documents Standard features: • Galvanized steel sheet side panels Rodpjyyw Rtsfx Abksr • Rear side panel foldable • Wooden floor • Corner posts with insert option for extensions or mesh sides • Maintenance-free rubber suspension axles • Axle with continuous axle body and independent wheel suspension • 6 internal, floor-recessed lashing rings • Lever latch • Removable mesh extension • Tarp buttons for cargo net or flat cover • Knott overrun brake • Automatic reverse system • Robust V-drawbar • 13-pin connector • Reversing light • Large-size safety lighting • Integrated rear fog light • Lighting recessed in rear frame • Registration documents: Registration certificate (ZBII) & COC papers Options & accessories (retrofittable – please enquire): • Slotted rail on side panel • High front mesh • High tarpaulin • Side panel extension • Spare wheel • Toolbox • Rear support legs • Ramps • Flat cover • Additional lashing points • Slotted-rail tie-down system for straps & load bars • Rubber-coated slat rail for straps & bars • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery available - Advance dispatch of registration documents or provision of temporary (transfer) plates within Germany possible - Export license plate and customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! For over 30 years we have been specialist dealers and repair workshop for Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many other brands. - Errors, omission, and prior sale reserved -

Condition: new, * IMMEDIATELY AVAILABLE * SPECIAL PRICE for STOCK VEHICLE! Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV: New/2 years • Availability: IMMEDIATE • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,164 kg • Payload: approx. 2,336 kg • Internal dimensions: 620 x 210 x 30 cm (L x W x H) • Overall external dimensions: 773 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Superstructure: • Floor: 18 mm phenolic plywood • Side walls: Double-walled aluminium • Side wall height: 30 cm • Suspension: KNOTT parabolic suspension • Tilting function: YES • Hydraulics: Manual hydraulics • Loading angle: approx. 10° • Overrun device & brakes: KNOTT • Frame/chassis: Welded, hot-dip galvanized steel frame • Extension sides: none • Lashing eyes: 10 along the sides • Props: via rear for tilting • Ramp: 1 upright on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC papers Standard equipment: • Parabolic leaf-spring axle for heavy-duty loads and driving comfort • Foldable aluminium side walls • Welded steel sheet side wall/frame construction, hot-dip galvanized by immersion • Reinforced, very stable bolted V-drawbar • Side walls 30 cm high • Hot-dip galvanized steel ramp, upright • Very stable welded steel frame • Complete hot-dip galvanized frame • Rubber spring axle • Numerous stable cross members for high point loads • Lashing rings mounted on outer frame, 10 pcs (5 pairs) • Automatic reversing system • KNOTT overrun device and parking brake • Robust ramp locks • 13-pin plug • Reverse light • Large, safety-sized lighting • Integrated rear fog light • Rear frame recessed lighting • Rear side position lights • Automatic centre jockey wheel • Registration documents: ZBII & COC papers Optional accessories (on request): • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reverse light • Lashing straps • and much more New vehicle with warranty and TÜV certificate. ————— Rjdpfx Aoyyw Rmebkjr - Financing or leasing available - Nationwide delivery available - All prices include VAT - Advance shipment of vehicle registration document possible, or temporary license plates (Germany) can be provided - Export license plates incl. customs clearance available Descriptions and photos are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available from us! We have been specialist dealers & repair workshop for over 30 years for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Errors, mistakes, and prior sale excepted -

Condition: new, *IMMEDIATELY AVAILABLE* Including 18 mm floor plate / parabolic suspension / loading ramp / tiltable Technical Data: • Type: New vehicle • TÜV (MOT): New/2 years • Availability: IMMEDIATELY • Permissible total weight: 3,500 kg • Unladen weight: approx. 1,072 kg • Payload: approx. 2,428 kg • Internal dimensions: 520 x 210 x 30 cm (L x W x H) • Overall external dimensions: 673 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 65 cm • Tyres: 195/50R13C • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18mm phenolic resin laminated plywood • Side walls: double-walled aluminium • Side wall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: YES • Hydraulics: manual hydraulic • Loading ramp angle: approx. 11° • Overrun device & brake: KNOTT • Frame/chassis: fully welded, hot-dip galvanized steel frame • Extension: no • Lashing eyes: 8 pieces along side edge • Supports: via rear when tilting • Ramp: 1 upright ramp on shaft, 90 cm • Lighting connector: 13-pin • Registration: ZBII & COC documents Standard Equipment: • Parabolic spring axle (leaf spring) for extreme loads and driving comfort • Fold-down aluminium side walls • Welded side wall/frame construction made from sheet steel, hot-dip galvanized by immersion • Very robust bolted V-drawbar, reinforced • 30 cm high side walls • Hot-dip galvanized steel loading ramp, upright • Very robust fully welded steel frame • Frame completely hot-dip galvanized by immersion • Rubber suspension axle • Multiple reinforced cross members for high point loading capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-dimensioned safety lighting • Integrated rear fog lamp • Recessed lighting in rear frame • Rear side marker lights • Automatic centrally mounted jockey wheel • Registration documents: ZBII & COC papers Optional Accessories – available on request: • 100 km/h approval • Spare wheel • Toolbox • Net hooks • Additional lashing eyes • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance or temporary plates (Germany) can be provided. - Export plates incl. customs clearance available All descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from stock! We have been a specialist dealer & service workshop for over 30 years for the following brands: Brian James, Blyss, Debon, Humbaur, Hapert, Unsinn, Cheval Liberte, Ifor Williams, Koch, Lorries, Martz, Stedele, TPV, Tohaco, Vezeko, Variant, Vlemmix and many more. Redpfx Asyyw Rgjbkor - Subject to errors, mistakes, and prior sale -

Condition: new, * IMMEDIATE AVAILABILITY * Including parabolic suspension / 18 mm phenolic plywood floor / loading ramp / tiltable Technical Data: • Type: New vehicle Rjdeyyw Raopfx Abksr • TÜV (inspection): New/2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 972 kg • Payload: approx. 2,528 kg • Internal dimensions: 420 x 210 x 30 cm (L x W x H) • Overall external dimensions: 573 x 220 x 159 cm (L x W x H) • Loading edge height: approx. 63 cm • Tyres: 195/50R13C • Brakes: yes • Support wheel: yes, automatic • 100 km/h approval: optional • Including vehicle documents Vehicle Structure: • Floor: 18 mm phenolic plywood • Side walls: aluminum, double-walled • Side wall height: 30 cm • Chassis: KNOTT parabolic spring axle • Tipping function: YES • Hydraulics: manual hydraulics • Ramp angle: approx. 12° • Overrun brake & coupling: KNOTT • Frame/chassis: welded steel frame, hot-dip galvanized • Extension: none • Lashing rings: 8 pieces on the outer edge • Supports: via rear when tilting • Ramp: 1 upright on shaft, 90 cm • Lighting connector: 13-pin • Registration: COC papers Standard Equipment: • Parabolic spring axle (leaf suspension) for extreme loads and driving comfort • Foldable aluminum side walls • Welded steel sheet side wall/frame construction, hot-dip galvanized by immersion • Very robust bolted, reinforced V-drawbar • Side walls 30 cm high • Hot-dip galvanized steel loading ramp, upright position • Very robust welded steel frame • Complete frame hot-dip galvanized by immersion • Multiple sturdy cross-supports for high point load capacity • Lashing rings mounted on the outer frame, 8 pieces (4 pairs) • Automatic reverse function • KNOTT overrun coupling and parking brake • Solid ramp locks • 13-pin plug • Reversing lights • Large safety lighting • Integrated rear fog light • Recessed lighting in the rear frame • Rear side marker lights • Central automatic support wheel • Registration documents: COC papers Optional Accessories (available on request): • 100 km/h approval • Spare wheel • Storage box • Net hooks • Additional lashing rings • Reversing lights • Lashing straps • and much more New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery available - Vehicle registration documents can be sent in advance, or temporary registration plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are copyright protected! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers available for you immediately! For over 30 years, we have been a specialist dealer and workshop for sales and repairs of Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Subject to errors, mistakes, and prior sale -

Condition: new, *IMMEDIATELY AVAILABLE incl. rear ramp / parabolic suspension / spare wheel / bucket holder Technical specifications: • Type: new vehicle • TÜV: new / 2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall dimensions: 600 x 234 x 168 cm (L x W x H) • Loading height: approx. 38 cm • Tyres: 12 inch • Brakes: yes • Jockey wheel: yes, automatic • 100 km/h approval: optional • incl. vehicle documents Body construction: • Floor: 18 mm phenolic plywood • Side walls: solid steel sidewalls • Sidewall height: 30 cm • Running gear: KNOTT parabolic suspension • Tipping function: no • Hydraulics: - • Ramp angle: approx. 17° • Overrun device & brake: KNOTT • Frame / chassis: welded, hot-dip galvanized steel frame • Extension: no • Lashing rings: 10 outside and 4 inside • Supports: integrated into ramps • Ramps: upright ramp on rollers • Lighting connector: 13-pin • Approval: COC documents Standard equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized immersion bath • Very robust bolted, reinforced V-drawbar • 30 cm high sidewalls • Hot-dip galvanized steel loading ramps, upright • Very robust welded steel frame • Massive walkable steel mudguards • Complete frame hot-dip galvanized by immersion bath • Parabolic spring axles (leaf suspension) • Numerous sturdy cross beams for high point load • Lashing rings mounted on outer frame, 10 pieces (5 pairs), pulling force 1,000 kg per ring • Lashing rings mounted on the inside (4 pcs) • Automatic reverse • KNOTT overrun device and parking brake • Robust ramp locks • 13-pin plug • Reversing light • Large safety lights • Integrated rear fog light • Recessed lighting in rear frame • Rear side position lights • Central automatic jockey wheel • Registration documents: COC papers Retrofit accessories available on request: • 100 km/h approval Rodpfx Abeyyw N Njkjr • Storage box • Net hooks • Additional lashing rings • Reversing lights • Lashing straps • and much more. New vehicle with warranty and TÜV. ————— - Financing or leasing possible - Nationwide delivery possible - Vehicle registration document can be sent in advance or temporary number plates (Germany) can be provided - Export number plates including customs declaration available Descriptions and images are protected by copyright!! Trailer Center BAUMANN GmbH Dekkers Waide 17 46419 Isselburg More than 1,200 trailers immediately available from us! We have been an authorized dealer and service workshop for over 30 years: Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberte / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more brands. - Errors, omissions and prior sale reserved -

Condition: new, *IMMEDIATELY AVAILABLE* Including rear ramp / parabolic suspension / Beavertail rear / spare wheel / bucket holder Technical Data: • Type: New vehicle • TÜV (Technical Inspection): New / 2 years • Availability: IMMEDIATE!! • Permissible total weight: 3,500 kg • Unladen weight: approx. 815 kg • Payload: approx. 2,685 kg • Internal dimensions: 400 x 180 x 23 cm (L x W x H) • Overall external dimensions: 600 x 234 x 168 cm (L x W x H) • Loading edge height: approx. 29 cm • Tyres: 12 inches • Brakes: yes • Jockey wheel: yes, automatic Rsdpfxoyyw N As Abksr • 100 km/h approval: optional • Including vehicle documents Body/Construction: • Floor: 18 mm phenolic plywood • Sidewalls: full steel • Sidewall height: 30 cm • Chassis: KNOTT parabolic suspension • Tipping function: no • Hydraulics: - • Ramp angle: approx. 12° • Overrun brake & coupling: KNOTT • Frame/chassis: welded, hot-dip galvanized steel frame • Extension sides: none • Lashing rings: 10 outside, 8 inside • Supports: integrated within the ramp • Ramps: standing ramp on shaft • Lighting connector: 13-pin • Approval: COC documents Standard Equipment: • Lockable coupling head • Bucket holder • Spare wheel • Welded steel sidewall/frame construction, hot-dip galvanized by immersion • Very sturdy, bolted V-drawbar, reinforced • Sidewalls 30 cm high • Hot-dip galvanized steel loading ramps, upright • Very robust welded steel frame • Solid walk-on steel mudguards • Complete frame hot-dip galvanized by immersion • Parabolic spring axles (leaf suspension) • Beavertail rear / low loading angle for platforms and excavators • Multiple sturdy cross members for high point load capacity • 10 lashing rings mounted on outer frame (5 pairs), tensile strength 1,000 kg per ring • 8 lashing points mounted inside (4 pairs) • Automatic reverse function • KNOTT overrun device and parking brake • Sturdy ramp locks • 13-pin connector • Reversing lights • Large-size safety lighting • Integrated rear fog light • Rear frame lighting recessed • Rear side position marker lights • Centrally positioned automatic jockey wheel • Registration documents: COC papers Special Equipment Included: • Full-width rear ramp Optional Accessories (on request): • 100 km/h approval • Toolbox • Net hooks • Additional lashing points • Reversing lights • Lashing straps • and much more Brand new vehicle with warranty and TÜV. ————— - Financing or leasing available - Nationwide delivery possible - Vehicle registration document can be sent in advance or transit number plates (Germany) can be provided. - Export number plates with customs clearance also possible Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 1,200 trailers immediately available from us! We have been specialized dealers & repair workshops for over 30 years for brands such as Brian James / Blyss / Debon / Humbaur / Hapert / Unsinn / Cheval Liberté / Ifor Williams / Koch / Lorries / Martz / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix and many more. - Errors, changes and prior sale excepted -