Used Ppl for sale (19,702)

Condition: reconditioned (used), Year of construction: 2014, Immediately Available: Traveling Column Machine FS 2100 • Total travel in X axis: 21,000 mm – ideal for flexible large-part machining • Travel distances: X = 21,000 mm, Y = 1,500 mm, Z = 3,500 mm • iTNC 530 control with wireless HR 550 FS handwheel, operator cabin on the traveling column • 2-axis NC universal drilling/milling head, fully simultaneous and positioning mode per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque Bdsdpfext En Dsx Abzji • ICS air up to 6 bar • Dust protection packages for the safeguarding of guideways and drives • BA 4 per traveling column • Wireless probe RMP 60 by Renishaw • Work area monitoring with network camera and monitor located on the rear of the system • Process monitoring with ToolScope basic system • Additional control panel on the rear of the system • Partial enclosure of the working area and sheet metal door, rear side equipped with a safety fence for unobstructed view into the work area • Including fixators • Cooling aggregates • Including internal tool cooling (closed-loop system) with cooling unit • Short delivery time, immediately available – subject to prior sale – Inspection possible by appointment Spindle hours: approx. 9,079 SPECIAL PRICE!

Condition: used, Year of construction: 1991, pressure 500 t distance between columns 3200 mm stroke 1250 mm distance table/ram, max. stroke up, adjustment up 1810 mm table surface area 3000 x 1900 mm pressure of drawing cushion in ram 150 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 2400 x 1200 mm ram surface 3160 x 1900 mm speed down 400 mm/s speed up 250 mm/s working speed 18 - 58 mm/s height over floor 6,5 m power requirement 90,0 + 36,5 kW weight 110 t permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in ram, ram interlocking Bedjvuk Txspfx Abzedi year of manufacture 1976 - year of modernization 1991 as is where is, WITHOUT putting into operation, stored in partly dismantled condition

Condition: ready for operation (used), LAIPPLE / KEB M63L / 4a-SO SN:L113063970025005, used, minor signs of wear, 100% functional, scope of delivery as per photos Bdjdpfx Aoi D I D Nobzoi

Condition: ready for operation (used), Apple International mobile depositor, model: WD, serial number: 1601710, year of construction: 2016, 240 Vac, 1 Ph, 16 A, 8 heads, inside dimensions: Ø 500 mm x 405 mm, total dimensions: 1900 mm x 850 mm x 1550 mm. Bdodpfxeu D Hxas Abzsi

Condition: excellent (used), Used CHP Plant Manufacturer: Indop Year of manufacture: 2014 Fuel type: natural gas Electrical output: 50 kW Thermal output: 80 kW Operating hours: 28,901 h Bodpfx Abjwthzijzsdi Engine type: MAN GAS ENGINE e0834 e32 (54 kW) Number of cylinders: 4 Available: 3 units Indop 50 kW at €13,400 each 2 units Indop 20 kW at €8,600 each 1 unit Energ-g 50 kW at €13,400 Test run possible.

Condition: good (used), 2 PCR machines Bdedjqvpfpspfx Abzoi 1 PC + software Good working condition. Please check out our other listings as well.

Condition: good (used), functionality: fully functional, Travel paths X=2000 mm, Y=1500 mm, Z=1250 mm  Control Siemens 840 DsL  NC rotary table for 4-sided machining 1250 mm x 1250 mm  Horizontal spindle HSK100  Spindle 2500 rpm HSK 100, 2200 Nm spindle torque  Approx. 9500 spindle hours  Tool changing system HSK 100 / 40 places  Chip conveyor  Coolant supply  Blow-off device inside / outside air  IKZ 60 bar for deep hole machining  Full enclosure  Large interference circle 2300 mm Bjdpjxt Emmsfx Abzjdi  2-way pallet changer  Short delivery time, subject to prior sale  Year of manufacture 2010

Condition: used, Year of construction: 1983, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm Bodpfx Aevuk Tlsbzsdi pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s height over floor 6,8 m depth of the foundation 3,0 m power requirement 120 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m as is where is, stored in dismantled condition

Condition: used, Sharpening and sizing machine Oppliger Bsdjdm I R Hjpfx Abzsdi

Condition: excellent (used), Year of construction: 2008, TETRA PAK CAP 30 SPEED APPLICATOR Bdedpfx Abowuyp Iozji 1000 ml SQUARE FOR HELICAP 27 YOM 2008 6600 RUNNING HOURS ONLY EXCELLENT CONDITION

Condition: new, roll diameter: 100 mm, roll width: 35 mm, The scope of delivery includes: 01x double-stop brake roller, new Roller material: Polyamide wheel Plain bearing with bearing marks Roller material color: cream white Material color frame: galvanized Total height: 135 mm Castor Ø: 100 mm Castor width 35 mm Rotation radius: 360° Panel dimensions: 105 x 80 mm (WxD) Screw grid: 80 x 60 mm (WxD) Drill hole Ø: approx. 11 mm Number of drill holes: 04 pcs. Weight / pc.: approx. 0.908 kg Advantages compared to PA wheels: - The PA wheels are very low-wear. - They leave no marks on the floor. - PA wheels have a very low rolling resistance. General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery. Bedpfxertplne Abzedi

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2005, next inspection (TÜV): 04/2026, loading space length: 7,850 mm, loading space width: 2,440 mm, loading space height: 2,060 mm, loading space volume: 39 m³, Year of construction: 2005, Equipment: ABS, 2-Axle Keppler ZA18L Beverage Box Truck VIN K005293 Vehicle ID: 0421225 Chassis / Attachments: * Air suspension // Raise & lower function * Tires: 385/65 R22.5 * Remaining tire tread: Front approx. 20/30%, Rear approx. 30/50% * BPW Eco Plus axles * Jost rear landing legs * BPW Brake Monitor * Underslung hitch * Forklift pocket at the rear Bedpfswikzksx Abzedi Body: * Beverage box body * Pallet stop rail on right side * Side underrun protection on both sides * Dimensions (L x W x H): 7.85m x 2.44m x 2.06m * Both sides with swing doors for beverage crates Weights: * Gross weight: 18,000 kg * Payload: 12,280 kg * Unladen weight: 5,720 kg Miscellaneous: * German vehicle * Main inspection valid until 04/2026 * 1 previous owner ---- New main inspections / safety inspections or increasing/reducing the permissible weight available upon request. We are happy to assist you in obtaining export/temporary license plates, and can also arrange nationwide delivery of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English, and Russian! No liability for printing or typographical errors; subject to change, prior sale, and errors excepted. Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. With our longstanding experience in the preparation and sales of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On a 11,000 m² site, we offer a wide range of vehicles. Our company philosophy is characterized by fairness and credibility. Customer satisfaction is very important to us, which is why we offer an excellent all-round service package and provide a competent point of contact to support you in purchasing or selling vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist with loading your purchased vehicles. Organization of special transports We are happy to help arrange special transports. Short-term / export license plates We are happy to assist in obtaining export/temporary license plates. Customs formalities We are happy to assist you with customs procedures.

Condition: used, Year of construction: 2008, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, HDC3000 with 6 axes • Travel distances X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain TNC 530 with handwheel • NC rotary table for 5-sided machining, 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, full simultaneous and positioning operation Bdodpfx Aexmr T Tobzji • Spindle 10,000 rpm, HSK100, S1=220 Nm spindle torque • Tool changer system HSK100 / 60 positions – for tools up to 800 mm length • Chip conveyor • Optimized for 5-sided machining including deep-hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole drilling • Fully enclosed machine • Large interference circle 2800 mm • Includes washing gun • Short delivery time, subject to prior sale

Condition: used, Year of construction: 1993, pressure 500 t distance between columns 2240 mm stroke 1180 mm distance table/ram, max. stroke up, adjustment up 1800 mm table surface area 2050 x 1800 mm pressure of drawing cushion in table 250 t stroke of drawing cushion in table 380 mm drawing cushion surface in table 1800 x 1200 mm pressure of drawing cushion in ram 122 t Bjdpfjvuk I Nsx Abzodi stroke of drawing cushion in ram 200 mm drawing cushion area in ram 1800 x 1200 mm ram surface 2215 x 1800 mm table height over floor 500 mm speed down 400 mm/s speed up 10 - 400 mm/s working speed 10 - 100 mm/s depth of the foundation 3,0 m power requirement 122 + 75 + 64,5 kW weight 110,0 t Dimensions (WxDxH) 3,6 x 2,2 x 8,5 m height over floor 6,8 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table and ram, cutting impact cushioning, ram interlocking Foundation depth approx. 3,0 m press is currently under revision with control Siemens S 7 / safety control Pilz a sister machine can be offered in as is where is condition, partially disassembled

Condition: used, This listing is for 1 of 2 Applikon BioPilot 70L Fermenter. The unit is in full working condition and is ready for immediate use Overview The Applikon BioPilot 70L is a fully integrated, pilot-scale fermentation system designed for microbial and cell culture applications in research, development, and small-scale production. Manufactured by Applikon Biotechnology, a global innovator in advanced bioreactor systems, the BioPilot 70L offers exceptional flexibility, process control, and scalability—bridging the gap between laboratory and production environments. Key Features Advanced Bioprocess Technology Precision Control: Integrated control of key parameters such as pH, dissolved oxygen (DO), temperature, agitation, and feed rates. Scalable Design: Built to mimic laboratory-scale conditions, enabling seamless scale-up to production volumes. Modular Automation: Compatible with Applikon ez-Control, DeltaV, or Lucullus® PIMS for sophisticated process control and data management. High-Quality Construction 70L Total Volume (50L Working Volume): Ideal for pilot studies, process optimization, and small-batch production. 316L Stainless Steel Vessel: Electro-polished and cGMP-compliant for pharmaceutical and biotechnological use. Jacketed Design: Enables precise temperature control via thermal fluid circulation. Technical Specifications Model: BioPilot 70L Total Volume: 70 liters Working Volume: 50 liters (typical) Vessel Material: 316L stainless steel, electro-polished Control Options: ez-Control, DeltaV, Lucullus® Sterilization: In-situ sterilizable (SIP) and Clean-in-Place (CIP) compatible Ports: Multiple ports for probes, additions, sampling, gas inlets/outlets Applications Biopharmaceuticals: Production of recombinant proteins, enzymes, vaccines Industrial Biotechnology: Fermentation of bio-based chemicals and specialty metabolites Food & Beverage: Cultivation of probiotics and functional ingredients Bdodsxhfngjpfx Abzei Academic & R&D: Process development, scale-up studies, and microbial strain screening System Components 70L stainless steel fermentation vessel (jacketed) Modular control tower or integrated skid system Peristaltic pumps for acid/base, antifoam, and nutrient feed Autoclavable or SIP-compatible sensors for pH, DO, temperature, and level Gas flow control via mass flow controllers (MFCs) or rotameters Harvest and sampling ports, exhaust condenser, and sterile connections Quality Assurance Applikon fermentation systems are engineered and manufactured under strict quality control standards, ensuring full cGMP and FDA compliance where required. Factory Acceptance Testing (FAT), documentation, and validation support are provided for regulated environments. Benefits Flexible Configuration: Customizable to meet process-specific requirements Reliable Scale-Up: Accurate replication of lab-scale conditions in pilot volumes High-Level Automation: Advanced monitoring and control systems for optimized yields Ease of Integration: Compatible with existing bioprocess infrastructure Compliance-Ready: Suited for regulated production and research environments Conclusion The Applikon BioPilot 70L Fermentation System is the perfect solution for companies and institutions needing a reliable, scalable, and compliant bioreactor platform. With precise control, robust construction, and full integration capability, it empowers bioprocess development from the lab bench to commercial readiness.

Condition: ready for operation (used), CAP30 APPLICATOR 1000 HELICAP23 (HELICAP26 PRO): YOM 2016 VERSION 300 15.600 RUNNING HOURS Bdedpfew Nqn Njx Abzei PRICE 150.000 EUR FCA POLAND THE MACHINE WAS IN PRODUCTION TILL SEPTEMBER 20. EXCELLENT CONDITION, READY FOR SHIPPING

Condition: new, Center height 230 mm Center width 1000 mm Turning diameter over bed 460 mm Turning diameter without bridge 690 mm Bdedpek Dn Nwofx Abzji Turning diameter over support 285 mm Passage 58 mm Spindle mount DIN 55029 1 - 6" 12 speeds 25 - 2000 rpm Travel path - top slide 128 mm Travel path - cross slide 285 mm Feeds (longitudinal) 0.031 - 1.7 mm/rev Feeds (transverse) 0.014 - 0.784 mm/rev Thread (metric) 0.25 - 3.5 mm Thread (inch) 2 - 112 Gg/1" Thread (diametric) 8 - 144 D.P. Thread (module) 0.25 - 3.5 mm Motor power 400 V / 50 Hz / 5.5 kW Tailstock MK 4 Dimensions L x W x H 2020 x 1080 x 1600 mm Weight 1680 kg Accessories / Special features: • Lead and pull-spindle lathe in heavy-duty design with extensive standard equipment. Low vibration and smooth running. Including solid base and machine bed. • 3-axis digital display • 3-jaw chuck Ø 250 mm • 4-jaw chuck Ø 300 mm • Fixed and rotating steady rest • Quick-change tool holder system Multifix size B mounted, 5-part • Strong and torsion-resistant construction of the machine base and bed, which is cast in one piece from vibration-absorbing gray cast iron. • Hardened and ground bed guideways • Generously dimensioned machine bed • All guides are provided with adjustable wedge strips • Central lubrication in the bed slide • Right / left rotation can be switched on the bed slide • Removable bed bridge for machining large workpieces • Adjustable tailstock for turning cones • Guaranteed concentricity < 0.015 mm measured in the spindle nose • Closed feed gear, gears and shafts are hardened and ground • Clear control element with solid selector levers for selecting the speeds • Oil bath change gear with hardened and ground gears • Handwheels with adjustable fine scaling • Main spindle hardened and ground and running in an oil bath, as well as tapered roller bearings • Longitudinal feed, can be switched off using 4 adjustable switching cams • Mechanical foot spindle brake • Lead screw cover • Acceptance protocol • Manufactured according to DIN 8606 toolmaker precision • CE compliant Delivery time: immediately, subject to prior sale Year of manufacture: 2023 (unused exhibition machine) Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2005, next inspection (TÜV): 04/2026, loading space length: 7,850 mm, loading space width: 2,440 mm, loading space height: 2,060 mm, loading space volume: 39 m³, Year of construction: 2005, Equipment: ABS, 2-Axle Keppler ZA18L Beverage Box Body VIN K005293 Vehicle ID: 0421225 Chassis / Attachments: * Air suspension // Raise + Lower * Tyres: 385/65 R22.5 * Remaining tyre tread: front approx. 20/30%, rear approx. 30/50% * BPW Eco Plus axles * Jost rear landing legs * BPW Brake Monitor * Underrun coupling * Rear forklift mount Body: * Beverage box body * Right-hand pallet stop * Side impact protection on both sides * L x W x H: 7.85m x 2.44m x 2.06m * Double-sided swivelling beverage walls Weights: * Gross vehicle weight: 18,000 kg * Payload: 12,280 kg * Unladen weight: 5,720 kg Miscellaneous: * German vehicle Bdjdpfx Aswikzqobzsi * General inspection (HU) valid until 04/2026 * 1 previous owner New general inspections, safety checks or chassis weight upgrades/downgrades are available upon request. We are happy to assist you in obtaining export/transfer license plates, and also in transporting your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for typographical or printing errors. Subject to change, prior sale and errors! Who are we? Leible Commercial Vehicles is a family business based in Kehl am Rhein. With many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Commercial Vehicles' particular strength lies in the sale of new and used commercial vehicles. On over 11,000 sqm, you will find a large selection of vehicles. Our corporate philosophy is characterized by fairness and reliability. Customer satisfaction is our top priority, so we offer our clients an excellent all-round service package and provide them with a dedicated contact person to assist them with the purchase or sale of vehicles. See for yourself! Our services for you: Vehicle loading We are happy to assist you in loading your purchased vehicles. Arrangement of special transports We are happy to assist you in organizing special transports. Short-term/export plates We are happy to assist you in obtaining export or short-term license plates. Customs formalities We are happy to assist you with all customs procedures.

Condition: reconditioned (used), Year of construction: 2014, Available immediately Moving column machine FS 480 Bdsdpfx Abjxbpv Ijzoi - Total travel X=4800 mm, ideal for flexible machining of large parts - Travel X=4,800 mm, Y=1,500 mm; Z=3500 mm - iTNC 530 control with wireless HR 550 FS radio handwheel, operator's cabin on the traveling column - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation per traveling column - HSK-A 100 spindle, 10,000 rpm, 220 Nm spindle torque - IKZ air up to 6 bar - Dust protection packages to protect the guides and drives - BA 4 per traveling column - Radio measuring probe RMP 60 Renishaw - Work area monitoring with network camera and monitor at the rear of the system - Process monitoring ToolScope basic system - Additional control panel at the rear of the system - Partial enclosure consisting of work area and sheet metal door, rear with safety fence with unobstructed view into the work area - incl. fixators - Cooling units - incl. internal tool cooling (closed cooling circuit) with cooling unit - short delivery time, available immediately, subject to prior sale Inspection possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!!!

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2004, next inspection (TÜV): 03/2026, loading space length: 7,850 mm, loading space width: 2,440 mm, loading space height: 2,060 mm, loading space volume: 39 m³, Year of construction: 2004, Equipment: ABS, 2-Axle Keppler ZA18L Beverage Box Body VIN: A004899 Vehicle ID: 0527125 Chassis / Attachments: * Air suspension // Raise + lower function * Tires: 385/65 R22.5 * Remaining tread: Front approx. 20%, Rear approx. 70/60% * BPW Eco Plus axles * Jost rear landing legs * Undermounted * Rear forklift mount Body: * Beverage box body * Pallet stop on the right side * Side underrun protection on both sides * L x W x H: 7.85m x 2.44m x 2.06m * Swing walls on both sides Weights: * Gross weight: 18,000 kg * Payload: 12,280 kg * Tare weight: 5,720 kg Other: * German vehicle * Next inspection (TÜV): 03/2026 * 1 previous owner ---- New main inspections / safety checks or weight reductions/increases available on request. We are also happy to assist you in obtaining export/temporary license plates, and can arrange national delivery of your purchased vehicles within Germany. Contact us! Bedpfowtkldex Abzodi ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typing errors. Subject to change, prior sale, and errors. ---- Who are we? Leible Nutzfahrzeuge is a family-run business based in Kehl am Rhein. Thanks to our many years of experience in the field of commercial vehicle reconditioning and sales, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On our 11,000 sqm site, you will find a large selection of vehicles. Our company philosophy is characterized by fairness and integrity. Since customer satisfaction is our top priority, we offer an excellent all-round service package, including an expert contact person to support you throughout the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organizing special transports We are happy to assist you in organizing special transports. Day plates / Export license plates We are happy to assist you in obtaining export or temporary license plates. Handling customs formalities We are happy to assist you with customs procedures.

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar Bdjdpfx Abjxmr Uqszji • Dust protection packages to protect the guides and drives • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: used, maximum load weight: 12,280 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2004, next inspection (TÜV): 03/2026, loading space length: 7,850 mm, loading space width: 2,440 mm, loading space height: 2,060 mm, loading space volume: 39 m³, Year of construction: 2004, Equipment: ABS, 2-axle Keppler ZA18L beverage box body VIN A004899 Vehicle ID: 0527125 Chassis / Attachments: * Air suspension // Raise & lower function * Tyres: 385/65 R22.5 * Remaining tread depth: Front approx. 20%, Rear approx. 70/60% * BPW Eco Plus axles * Jost rear landing legs * Underslung coupling * Rear forklift mounts Body: Bsdpfowtklkjx Abzedi * Beverage box body * Pallet stop on the right * Side underrun protection on both sides * Dimensions (L x W x H): 7.85m x 2.44m x 2.06m * Double-sided beverage swing walls Weights: * Gross vehicle weight: 18,000 kg * Payload: 12,280 kg * Unladen weight: 5,720 kg Miscellaneous: * German vehicle * Main inspection valid until 03/2026 * 1 previous owner ----- New main inspections / safety checks or weight reductions/increases are available on request. We are happy to assist you in obtaining export/temporary licence plates; we can also arrange transport of your purchased vehicles within Germany. Contact us! We speak the following languages: German, English and Russian! No liability for printing or typing errors. Subject to change, prior sale and errors! Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge’s particular strength lies in selling new and used commercial vehicles. On 11,000 sqm, you will find a wide range of vehicles. Our company philosophy is characterised by fairness and integrity. Because customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide a competent contact person to support you throughout the purchasing or sales process. See for yourself! Our services for you: Loading of vehicles We are happy to assist you with loading your purchased vehicles. Organising special transports We are happy to help organise special transports for you. Day plates / export plates We are happy to assist in obtaining export or short-term plates. Handling customs formalities We are happy to assist in dealing with customs matters.

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun Bdsdpjxbpuksfx Abzoi • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: new, Year of construction: 2024, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, New machine with completion date 02/2024 HDC3000 with 6 axes - travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 640 with handwheel - NC rotary table for 5-sided machining 1250 mm x 1600 mm - 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation - Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque - HSK100 tool changing system / 60 places - 800 mm long tools - Chip conveyor - optimized for 5-sided machining incl. deep-hole drilling - Coolant supply - Internal / external air blow-off device Bdjdpfx Absxbpuwozoi - IKZ 60 bar for deep hole machining - Full enclosure - Large interference circle 2300 mm - incl. fixators - incl. washing gun - incl. warranty - Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 2015, - Travel X=3000 mm, Y=1500 mm, Z=1400 mm - Heidenhain iTNC 530 with handwheel HR 410 - NC rotary table for multi-sided machining 1600 mm x 1250 mm - 1-axis NC universal drilling and milling head, for simultaneous and positioning positioning operation (A-axis, 45°-axis) - Motor spindle 7,000 rpm max. SK 50, 530 Nm spindle torque - Tool changing system SK 50 / 40 places for 400 mm long tools Bodpjxmr Uwsfx Abzjdi tools - Chip screws in X-axis, optimum chip transport - Chip conveyor (hinged belt conveyor) for transverse conveying, Fabr. Knoll, front ejection - Coolant supply 950 l, made by Knoll - Outside/inside air at the spindle - IKZ 60 bar for deep hole machining - Operating mode 4 - Full enclosure with safety glass panes with sliding doors, optimized for crane loading - Split sliding doors on the front side - Split sliding doors on the operator side - RMP 60 radio measuring probe - incl. washing gun - Short delivery time by arrangement, subject to prior sale - Used machine - Z-axis KGT renewed in September 2023 incl. bearings - Optional fixators and tie rods - optional commissioning/installation - optional transportation