Buvac B.V.

Condition: excellent (used), functionality: fully functional, Brush deburring from all sides using a rotating and simultaneously revolving stainless steel brush Cjdpfex Dhqiox Addsrk

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Brush Deburring Machine RE 500 Cedsxzrd Ujpfx Addsrk Brush diameter: 250 mm Revolutions: 1500/3000 rpm Operating manual

Condition: good (used), functionality: fully functional, automatic pipe end deburring Crodpfsxx U Tyox Addok in continuous process --- Pipe length max. 600 mm Max. pipe diameter 30 mm Brush length approx. 450 mm Brush revolutions 2000 rpm 2 brush drive motors, 5.5 kW each

Condition: good (used), Year of construction: 1994, Speed: 1500 / 3000 rpm Connected load: 2.4 / 3.7 kW Space requirement: approx. 1.0 x 0.5 x 1.2 m (L x W x H) Crodpfsxr A A Nsx Addjk

Condition: used, Brush deburring machine, tube deburring machine RSA type STL 1 Year of manufacture: approx. 1990 Brush diameter: 250 mm Brush width: 25 - 60 mm Speed: 1430 / 2870 rpm Power: 2 / 3 kW Mains connection: 380 Volt, 50 Hz - Material support - Extraction connection Ø 75 mm Space requirement L x W x H: 650 x 550 x 440 mm Weight: 100 kg Codpfxjxpqy Ro Addjrk Good condition

Condition: new, diameter of brush Ø 250 mm Csdexaamnspfx Adderk width of brush 40.0 mm turning speed range 2850 U/min voltage 400 Volt total power requirement 1.3 / 1.8 kW weight of the machine ca. 36.0 kg dimensions of the machine ca. 415 x 467 x 356 mm Equipment: - Deburring of individual pieces and small series - Deburring of stretched round, rectangular and square tubes + flat material - Heavy, durable industrial design - with maintenance-free motor - long service life and very smooth running thanks to balanced rotor - with quality ball bearings - storage area for safety glasses - incl. 1x multi-purpose wire brush, wire thickness 0.35 mm - operating instructions

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, type of input current: AC, input voltage: 400 V, working width: 1,100 mm, overall weight: 1,300 kg, workpiece width (max.): 600 mm, compressed air connection: 6 bar, sheet thickness (max.): 40 mm, number of previous owners: 1, height adjustment type: electric, table length: 3,000 mm, table height: 850 mm, table width: 600 mm, warranty duration: 3 months, Operating mode: dry Application description: Deburring of steel and stainless steel components Year of manufacture: 2007 Standards: CE, EU Machinery Directive 98/37/EC, VDE Units of measurement: mm, bar Operating manual: 1x manual included Paintwork: RAL 9002 white (textured), outfeed table RAL 5010 gentian blue Planetary head station with 3 units: Planetary head design with 6 tools per unit, each driven by a 1.3 kW motor; speed controlled by frequency converter, 100–300 rpm; disc station with electric height adjustment. Technical data: Working width: 1100 mm Table height adjustment: 0.55 kW motor Planetary head adjustment drive: 0.18 kW Feed drive: 1.3 kW (Lenze Motec) Conveyor belt dimensions: 1100 x 3000 mm (high wear-resistant design) Cjdpow U A Dmefx Addork Workpiece thickness: 0.8 – 40 mm Constant working height: 850 mm Compressed air connection: 6–7 bar Operating voltage: 3x400 Volt/N/PE/50 Hz Control voltage: 24 Volt DC Infinitely variable feed rate: 0.5–5 m/min, frequency controlled; automatic workpiece thickness adjustment with start switch (Joucomatic); 400 mm outfeed table with integrated brush for conveyor drive (0.25 kW), DC brake Height adjustment gearbox, vacuum blower, aggregate locking, belts renewed – machine is fully operational and in very good technical condition. Adjusted according to manufacturer’s specifications/standards. Sale includes a 3-month mechanical functional warranty from date of delivery.

Condition: used, Technical details: Weight: ca. 80 kg dimension machine xH: ca. 077 x 0,45 x 0,5 m BRUSH MACHINE Crsdpfx Aswiu Smoddok *

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1503, working width: 1,000 mm, workpiece width (max.): 800 mm, workpiece height (max.): 100 mm, workpiece length (max.): 4,000 mm, TECHNICAL DETAILS Working width: 1,000 mm Brushes: Fladder, grit 100 Maximum workpiece width: 800 mm Maximum workpiece height: 100 mm Maximum workpiece length: 4,000 mm Crodpfewa T Sajx Addsk MACHINE DETAILS Voltage: 3 × 400 V Frequency: 50 Hz Current: 50 A Protection class: IP54 EQUIPMENT - Vacuum carpet - Vacuum pump - Additional brush set, grit 100

Condition: new, Year of construction: 2025, functionality: fully functional, MODEL KD-BR Minimum size of part 50mm Cjdpfovx Tllsx Addjrk Function Deburring , chamfering Electronic component schneide Bearing NSK Max working width 450mm 800mm 1000mm 1300mm 1600mm Max thickness 80mm transferred speed 1~10m/min power of lift motor 0.37kw/2 power of propeller motor 7.5kw/1 brush roll motor power 2.2kw/2 transferred motor power 1.5kw/1 Total power 26.64kw Diameter of brush roll 300mm NO. of brush roll 4 / 6 / 8 Machine size 2350*1450*2200mm Weight 2600kg

Condition: used, Brushing machine / brush deburrer Credpfx Asu Nu Rnoddjk - make Lindemaier, year 1990, power consumption 7,5 kW, dimension: L:1,0 x W:0,80 x H:1,25m, weight approx. 48 kg - brush size Ø 300 x Ø 50x50mm type K 180 - engine speed 2920 rpm, suction nozzle Ø 180mm - with blow-off device Accessories: approx. 15 spare brushes NEW *

Condition: used, Technical details: grinding spindle speed: 1440 U/min voltage: 220 V / Hz total power requirement: 1,1 kW Credsu Ng S Djpfx Addok machine weight approx.: 75 kg space requirements of the machine approx.: L:0,4 x B:0,7 x H:1,15 m Polishing block stands on welded sectional steel base with foot plate (400x400x5mm) -wire brushes Ø 200x25mm each are mounted on the left and right -without sanding support -Protection class IP44 -Operation via ON/OFF switch *

Condition: new, Machine for grinding, deburring, rounding and polishing, manual, mobile use with vacuum system, alternatively also with magnetic system, starter kit and 1 brush CE-certified, designed with double emergency stop circuit and reset system Weight 445 kg Dimensions 1435x1100x1510mm high Working height 950 mm Work surface 1280x780 mm Minimum workpiece dimensions 20x20mm Maximum workpiece height 120 mm Maximum width of workpiece: unlimited length, with maximum width 780 mm Maximum workbench load 100 kg Operation: Double manual operation Number of work stations 1 Quick holder for brush M14x2 left-hand thread M14x2 right-hand thread for abrasives Brush design Disk brush Ø150mm with quick-change system Various brush variants possible, depending on material, we will be happy to advise you. Bia2Qk2S2I Brush power 0.75kW frequency-controlled motors Brush motor speed 150 - 1500 r.p.m. Crjdpfxjt Dpxbj Addjk Workbench Carpet / Special friction design Vacuum system fixation in the workbench (standard) Vacuum system kW 2.2 kW Also available with additional magnets as an option (available from stock) Electrical values Voltage V 400 V (3L+N+PE) Frequency Hz 50 Hz Current A 10 A Power kW 6 kW Plug-in device CEE 400 V / 16 A (5-pole)

Condition: as good as new (ex-display), Year of construction: 2024, Boschert brush deburring machine model K3 for deburring straight sheet edges and on the lateral aggragate suitable for cut-outs and notches up to 70 mm deep as well as outer radii on sheet metal. Cedpfx Astr Avijdderk 3 motors á 1,5 kW brush diameter : 300 mm Material: wire brushes VA/steel Material range: 0.8-8 mm thickness Machine dimensions: Width: 1400 mm Height: 580 mm Depth: 670 mm Underframe: 800 mm high (working height 920 mm) Table support: 200x1400 mm Hold-down device as sheet guide The sheet edge is deburred simultaneously from above and below as it passes by. If the burr is very thick, the motors can be synchronized so that both remove the thick burr from the top. The 3rd (lateral) unit is for deburring external contours and is switched on separately. A larger lateral table support serves as a shelf

Condition: good (used), Min. Pipe length: 100-1800 mm Codpeq U Rccofx Addsrk The system was previously used for deburring cut pipes!

Condition: new, Year of construction: 2025, High-performance deburring system for internal and external deburring of profiles and pipes in one operation (approx. 3 seconds) Powerful industrial geared three-phase motor, frequency-controlled, for stepless adjustment of the required speed: 600 - 2,700 rpm, for deburring pipes and profiles with material dimensions horizontally/vertically 120 mm, easily adjustable work table height (adjustable and lockable) for the corresponding material size adjustable, lockable delivery (slide) of the deburring brushes to the work table using a handwheel with locking function. Drawer for dust residues. Steel sheet housing with preparation for connection to an external extraction system. Hinged housing covers for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated steel wire. Connection cable with CEE plug. Incl. operating tools. 12 month guarantee for single-shift operation Working height: 1050 mm Speed: 600 - 2700 rpm Weight: 410 kg Machine dimensions: 680 x 1200 x 1380 Power: 3 kW Electrical connection (V/Hz) 400/50 Brush diameter: 250 mm Normal brush width: 60 mm. Available immediately from stock. NOT THE RIGHT MACHINE? Crjdpfx Ajnvfl Asddsk WE ARE A FLOTT SUPPORT POINT PARTNER AND CAN OFFER YOU ALL PRODUCTS FROM THE FLOTT RANGE! ASK FOR A QUOTE!

Year of construction: 1997, condition: used, Brush deburring machine RSA RASAMAX MONO for brushes Ø 250 mm and approx. brush width 80 mm speed range 1500 / 3000 rpm operating voltage 380 volt total power requirement 2,0 / 3,0 kW Weight approx. 180 kg for deburring of sheet metal with contours for material thickness from approx. 1,0mm to 6,0mm. Brush speed 2-stage 1500 or 3000 rpm Machine is located in 71334 Waiblingen-Beinstein and can of course be inspected, please contact us. Crsdsimbq Depfx Addjk

Condition: new, GRATMAXX Bürstentgratmaschine The machine is suitable for the deburring of edges on: Round tubes, square tube, rectangular tube, full materials, profiles of all kinds. Materials: Steel non-ferrous metals, plastics, hard or soft. Work flow: After setting the workpiece support and dern side stops the Ridge-workpiece is easily kept on the brush rotating around its own axis, without rotating the workpiece, this movement is also the brush. The workpiece material, the Ridge strength, as well as the desired rounding of the edges determine the pressure and the duration of contact seconds, usually around 1-5. Technical data: Material: Steel, stainless steel and non-ferrous metals (engine speeds 700-1,900 rpm, infinitely variable) Min. workpiece-Ø: 5 mm Crsdpfxsd Hmnfs Addsk Maximum work piece-Ø: 100 mm (150 mm) Brush dimensions: 2 piece Ø300 (250) x 50 or 3 piece Ø 300 (250) x 35 Power: 3,0 KW Power: 3.5 KW Operating voltage: 3 ~, 400Volt, 50 Hz Rated current: 8A Back-up fuse: max 16A Control voltage: 24V/DC Width: approx. 500 mm + Handwheel 74 mm, + dust spout 130 mm Altitude: 1.382 mm Working height: approx. 1.080 mm Depth: 1,209 mm Weight: 310 kg Sound pressure level: At speed 700 rpm 64 dB(A) at a speed 1500 rpm 74 dB(A), when machining a workpiece with maximum speed of 82 dB(A) Scope of delivery: Rotary head Bürstentgratmaschine GratMaxx with power socket without cable Workpiece support table with adjustable angle stop and