Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: CR690, overall weight: 1,350 kg, load capacity: 1,00,000 kg, Electric Chassis System Robot 100 Ton Set – OX TBC 100 The self-propelled trolleys offer a high load capacity of 100 tons and a very low height, with the ability to rotate 360°, making it possible to position them under all types of loads and for maneuvering. Motor-driven trolley models with hydraulic lifting cylinders are also available for loading onto vehicles or shelves, offering a speed of up to 5 m/min max. Length - 1602 mm Prjdpfxsw Taiko Abpsa Width - 2019 mm Height - 315 mm Max. load/lifting capacity - 100 tons Remote control

Year of construction: 2019, condition: as good as new (ex-display), Used Machine Prjdpfxszrpxws Abpoa Year of Manufacture: 2019 Condition: Display model, like new Features and Technical Specifications: - Battery voltage: 18 V - Saw blade diameter: 160 mm - Bore: 20 mm - Cutting depth: up to 57 mm at 90° up to 40.5 mm at 45° - Tilt range: -1° to 48° - No-load speed: 4,850 rpm - Dust extraction port - Weight: approx. 4.5 kg

Condition: used, Diamond core drilling machine, drill, REMS Picus S1 Basic-Pack electric diamond core drill + REMS Simplex 2 drill stand, Used machine Manufacturer: Rems Type: Picus S1 Overall dimensions: Width: 670 mm Depth: 260 mm Height: 160 mm REMS Picus S1 Basic-Pack Motor: 1850 W universal motor Prjdpfjxpqvrex Abpea Speed (under load): ~ 580 rpm Max. drilling diameter in reinforced concrete: Ø 102 mm (up to Ø 132 mm under certain conditions) Max. drilling diameter in brick / masonry: Ø 162 mm Drilling depth: up to 420 mm Weight: approx. 5.2 kg Connections & accessories: Drill bit connection: UNC 1¼ external thread, G ½ internal (water connection) Water supply unit with shut-off valve, quick coupling, and water stop function Multifunctional electronics: soft start, overload protection, idle speed limiter, blockage protection Safety slip clutch REMS Simplex 2 Drill Stand Suitable for core drilling up to Ø 200 mm Drill column: precision, square steel profile Ø 50 mm Adjustable for floor unevenness: 4 screws for correction Slide guide: adjustable on all sides, with preloaded plastic bearings Drive: rack-and-pinion system with ratchet lever operation Clamp and collar for Ø 60 mm gearbox mounting Integrated spirit level, with slide lock for easier adjustment and transport Weight: approx. 12 kg

Year of construction: 2014, operating hours: 7 h, condition: used, machine/vehicle number: 6151654560, Used Desoutter ECS4-M20 electric screwdriver with connection cable fully functional without any additional accessories Item.No.: 6151654560 suitable for Desoutter CVIC II - L2 and CVIC II - H2 - screw control Output: Hex 1/4F" Torque: Min.: 1.0 Nm Prjdpfxsvxu Dve Abpoa Max.: 4.0 Nm Idle speed: 2000 rpm Weight: 0.6kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 10 h, machine/vehicle number: 6151570380, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8603 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) No-load speed: 20 rpm Min/Max torque range: 50 to 240 ft.lbs Predpfx Abjv Tbh Ropoa Working torque: 65 to 190 ft.lbs Drive: 3/4" square drive Length: 11.06 in. Weight with battery & reaction arm: 9.0 lbs

Year of construction: 2016, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659480, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLBN120-L550-S4Q switch-off with lever start Idle speed: 410 / 550 min-1 Torque range: 4.0 to 12 Nm Output: 1/4" Length: 301 mm Weight without battery: 1.25 kg Other tools for industrial production and maintenance on request. Pedov Ipt Rspfx Abpora

Year of construction: 2016, operating hours: 15 h, condition: good (used), functionality: fully functional, machine/vehicle number: 6151654220, From our demonstration tool inventory, tested and fully functional: Prodpfx Abov Iphuopsa Desoutter E-Lit Premium elektric pistol screwdriver ELS12-600P without battery with speed adjustment (via optional module) Idle speed: 250 to 570 min-1 Torque range: 3.0 to 12 Nm / 26.5 - 106 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request.

Year of construction: 2001, condition: like new (used), functionality: fully functional, machine/vehicle number: 1382434, From our demonstration tool inventory, tested and fully functional: new Desoutter D315-S-1050 compressed air 45° angle drill with trigger start Power: 280 W Torque: 10 Nm Idle speed: 1050 min-1 Prodpfov Inwzox Abpoa Length: 280 mm Weight: 0.84 kg Other tools for industrial production and maintenance on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 2024, operating hours: 5 h, machine/vehicle number: 6151570000, From our demonstration tool inventory, tested and fully functional: Chicago Pneumatic Cordless electric High-Torque Wrench CP8613 Demonstration tool with charger + 2 batteries (36 V 2.5 Ah) Accuracy (6 sigma): +/- 4% Predpfx Absv Tbz Dspsa No-load speed: 10 rpm Min/Max torque range: 220 to 960 ft.lbs Working torque: 290 to 770 ft.lbs Drive: 3/4" square drive Length: 12.52 in. Weight with battery & reaction arm: 11.7 lbs Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2011, condition: used, machine/vehicle number: 6151653640, Used Desoutter ERAL2-60 angle screwdriver, electric controlled including motor cable compatible with Desoutter CVI 2 - screwdriving Pedpfxjcpbcvs Abpora Drive : 3/8" Torque: working Torque : 5.9 till 33.0 ft.lb max Torque : 44.0 ft.lb net weight : 3.7 lb. Length: 17.4 in.

Year of construction: 2011, condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Prjdpfx Aevtf R Aobpoa Output: Hex 1/4F" Torque: Min.: 1.5 Nm Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Year of construction: 2011, operating hours: 7 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151659360, From our demonstration tool inventory, tested and fully functional: Desoutter low-voltage screwdriver SLB012-A2000-S4Q-NE shut-off with push start Idle speed: 1000 / 750 min-1 Torque range: 0.20 to 1.18 Nm / 1.76 to 10.4 in.lb Output: 1/4" Length: 245 mm Weight without battery: 0.83 kg Prodov Ipx Hjpfx Abpoa Other tools for industrial production and maintenance on request.

Year of construction: 2014, operating hours: 2 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 6151654200, From our demonstration tool inventory, tested and fully functional: Desoutter E-Lit Premium elektric pistol screwdriver ELS6-1000P without battery with speed adjustment (via optional module) Idle speed: 300 to 1000 min-1 Torque range: 0.8 to 6 Nm / 7.1 - 53 in.lb Output: Hex 1/4" F Length: 215 mm Weight without battery: 0.8 kg Other tools for industrial production and maintenance on request. Podpfxev Ipclo Abpjra

Year of construction: 2014, operating hours: 10 h, condition: as good as new (ex-display), machine/vehicle number: 6151656290, Desoutter Battery Angle Screwdriver shut off ELS15-480-A Prjdpfscr H Eaex Abpea Demonstration tool Charger 230 V Ladegeraet + 2 Batterys (18 V 2,6 Ah) included Free speed: 200 to 480 rpm Torque Range: 44,2 in.lb till 133 in.lb Output drive: Sq. 3/8 Length: 16,5 in. Weight (without Battery) : 2,6 lb.

Year of construction: 2010, operating hours: 75 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Prjdovxux Hopfx Abpea Desoutter control CVIC II L4 Year of manufacture: 08/2010 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2018, condition: new, machine/vehicle number: 6159327070, We are dissolving part of our demonstration tool inventory: Prodsv Iqfzjpfx Abpja Desoutter ESP1-HT PLUS control for SLBN low-voltage screwdrivers Year of manufacture: 04/2018 Article no.: 6159327070 used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN090 -SLBN120 ESP1-HT PLUS The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100 V or 240 V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2016, operating hours: 3 h, condition: excellent (used), machine/vehicle number: 6159327080, We are dissolving part of our demonstration tool inventory: Desoutter extended control ESP2-A for SLBN low-voltage screwdrivers Year of manufacture: 09/2016 Article no.: 6159327080 little used, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 -SLBN012 -SLBN020 -SLBN030 -SLBN050 -SLBN090 -SLBN120 The ESP2A is designed to optimize the performance of Desoutter SLBN screwdrivers, reduce your energy consumption and offer up to five program settings and PLC integration, including remote start and tool activation. In addition to the OK/NIO and group IO reporting, the ESP2A offers a wide range of rundown options including pre-run reversal, slow start, tightening phase and post-run reversal. Benefits Two tools can be connected to one ESP2A, offering unmatched flexibility and reduced installation costs. Improved production integration and traceability functionality to improve your product quality. Compatible with over 15 tools for a standardized platform, faster readjustments and lower total cost of ownership. Five cycles with 3 possible phases each offer versatility no matter where your production is headed. Multiple preset tightening strategies to replace multiple tools with a single one for a quick return on investment. Pjdpfx Abjv Ipnzjpjra Available in both lever-start and push-start tools from 0.07 N.m to 12 N.m with a full range of accessories for all your tightening needs. Fully compatible with a range of accessories to optimize your tightening process and ensure continued quality. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2016, operating hours: 10 h, condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 Podpfovtf Arsx Abpora I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Year of construction: 2002, condition: good (used), Complete Desoutter screwdriver system consisting of: 1 x Transducer controlled angle screwdriver Desoutter ERA40J Art.Nr .: 6151650800 Torque range: 8 to 40 Nm Output: 3/8 " Number of revolutions. 900 min-1 Length: 458 mm Weight: 2.1 kg 1 x Transducer controlled angle screwdriver Desoutter ERA60J Art.Nr .: 6151650810 Torque range: 15 to 60 Nm Output: 3/8 " Number of revolutions. 570 min-1 Length: 469 mm Weight: 2.2 kg 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Podedcmizepfx Abpora Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Moeliche screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 2 x motor cable for hand screwdriver 5 m length Art.Nr .: 6159170720 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Year of construction: 2020, condition: new, machine/vehicle number: 6159326350, We are dissolving part of our demonstration tool inventory: Desoutter ESP1 control for SLBN low-voltage screwdrivers Year of manufacture: 11/2020 Article no.: 6159326350 new, fully functional without additional accessories Suitable for the following Desoutter screwdrivers:# -SLBN003 -SLBN010 Podov Iqcgjpfx Abpora -SLBN012 -SLBN020 The ESP1 control was developed to optimize the performance of Desoutter screwdrivers and offers two speed ranges while reducing energy consumption. Advantages: With 2 speed options, the ESP1 offers flexibility to optimize your screwing process and ensure lasting quality. Compatible with 100V or 240V inputs for a standardized platform, faster readjustments and lower total cost of ownership. Other tools for industrial manufacturing and maintenance on request.

Year of construction: 2006, condition: good (used), 1087/5000 Complete Desoutter screwdriver system consisting of: 2 x Transducer controlled angle screw spindles Desoutter EML51-20J Art.Nr .: 6151650640 Torque range: 30 to 135 Nm Output: 1/2 " Number of revolutions. 403 min-1 Length: 166 mm Diameter: 51.2 mm 1 x screw control Desoutter MODCVI-2 (= rack version of TWINCVI-2) with transformer. Art.Nr .: 6159325210 Screw - on cable: 2 Number of screw cycles per channel: 250 Number of phases in a screw cycle: 20 IO Sum counter: 99 Screwdriving Bins: Moment + Angle + Date + Time + Result + (bar code): up to 11600 Screws: 6 Pedpodcmdlofx Abpjra Possible screw strategies: Torque control with angle control Rotation angle control with torque control Dremoment- / Drehwinkelsteuerung Torque control with rotation angle and gradient control Rotation angle control with torque and gradient control Stretch control Hold torque / position Friction torque test Electricity compatibility 1 x motor cable 5 m length Art.Nr .: 6159171120 1 x Sensor cable length 5 m Art.Nr .: 6159171220 Including operating instructions

Condition: excellent (used), Professional industrial screwdriver by Atlas Copco, designed for continuous operation in assembly lines and production applications. True industrial-grade equipment – not a consumer retail product. Specifications and info: • Model: ETP STB34-06-106 • Power supply: 18V DC • Country of manufacture: Sweden • Year of manufacture: 2021 • Ergonomic, well-balanced design • Suitable for precision assembly and serial production Set includes: • Atlas Copco cordless screwdriver • 2x 18V Atlas Copco batteries • Atlas Copco charger • Everything visible in the photos is included Condition: Used, fully functional, with typical signs of use. No cracks, no play in the mechanism. The tool comes from industrial disassembly. Applications: • Manufacturing • Industrial assembly • Production lines • Professional workshops Pjdpfjyc Rvaex Abpera An ideal alternative to buying new equipment – significantly lower cost while maintaining Atlas Copco quality.

Condition: excellent (used), For sale: professional TRUMPF TruTool TKA 500 (1A1) plate edge beveller / chamfering machine. This machine is designed for making weld preparations and machining edges on steel plates. Condition: used, fully operational, normal signs of use visible in the photos. Industrial-grade equipment – made in Switzerland / Germany. Technical data: Power: 1400 W Supply voltage: 230 V / 50–60 Hz Current: 6.5 A Model: TruTool TKA 500 (1A1) Year of manufacture: 2009 Manufacturer: TRUMPF Applications: Bevelling plate edges before welding Chamfering for V and X weld joints Processing of structural and machine steel Workshops, fabrication, steel construction Scope of delivery: TRUMPF TruTool TKA 500 beveller Original TRUMPF transport case Manufacturer’s manual / documentation Prjdsyhnukepfx Abpea Accessories as shown in the photos The equipment is ready for operation. On-site inspection possible. Shipping or personal collection – to be arranged.

Condition: excellent (used), High-end hydraulic tool from the renowned manufacturer CEMBRE. This device delivers high clamping force and convenient operation thanks to battery power. Robust construction and reliability – equipment used in professional applications. 📊 Technical specifications: Manufacturer: CEMBRE Model: B35-50D Clamping force: 35 kN (approx. 4 tons) Max. cross-section: up to 150 mm² (Cu) Power supply: battery-powered Year of manufacture: 2010 📦 Included: CEMBRE hydraulic press Battery Pedpfxsy H Rdge Abpjra Charger Transport case Documentation Additional items as shown in the photos 📦 Condition: Very good technical condition Fully functional Normal signs of use Ready for work

Condition: excellent (used), Offering a professional CEMBRE B35-50D battery hydraulic crimping tool – a high-quality tool for industrial applications. The device is in very good technical condition, fully operational, and ready for work. ⚙️ Technical specifications: Model: CEMBRE B35-50D Crimping force: 35 kN (4 tons) Max cable cross-section: up to 150 mm² (copper) Power supply: 9.6V Ni-MH battery Rotating head: 180° Type: hydraulic, battery-powered Operation: one-handed ✅ Applications: Prodpoy H Ri Aofx Abpja cable lugs cable connectors LV electrical / industrial installations service and maintenance 📦 Set includes: CEMBRE B35-50D crimping tool 2x batteries charger carrying case documentation / manual shoulder strap ⭐ Advantages: Very robust industrial construction Quiet operation and minimal vibrations automatic return after crimping high precision and repeatability convenient one-handed operation 📌 Condition: Used – shows normal signs of use, fully operational technically.