Industriemontage und Handel UG

Condition: used, Deckel FP1 Tool and Cutter Grinding Machine Tool and Cutter Grinding Machine Deckel Type/Model FP1 Condition: Used, geometrically overhauled in 2026 Year of Manufacture: Mid-1960s Technical Data Travel ranges X/Y/Z: 300 / 150 / 340 mm Spindle stroke: 60 mm vertical Tool holder: MK 4 Speed range: 40 to 2,000 rpm, two-stage motor, gear stages Speed stages: 16 speeds Feed rates, 16 stages: 10 to 500 mm/min Drive power: Two-stage motor, approx. 1.0 / 1.4 kW Operating voltage: 380 V / 50 Hz Total connected load: approx. 1.9 kW Clamping surface: 600 x 210 mm Max. table load: approx. 150 kg Footprint (W x H x D): approx. 1,100 x 1,000 x 1,500 mm Weight, approx.: 750 kg Hodpfx Aoz A Tn Ioh Ssnt Inquiry item: Transportation costs will be provided in a separate quote.

Condition: used, machine/vehicle number: 008629, Max. panel length: 1300 mm No of injectors: 1 Positioning of Units by NC: yes Hjdpoz A Tnzefx Ah Sjnt

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels Spare wheel (6+1) tyres - 385/65R22.5 (11.75x22.5) Hedpfxoz A Tnns Ah Ssnt Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets TrailerConnect S.KO COOL country package wave 3 Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 6 mm Middle right - 6 mm Rear left - 8 mm Rear right - 8 mm

Condition: like new (used), functionality: fully functional, mileage: 21,000 km, first registration: 09/2023, fuel type: diesel, maximum load weight: 570 kg, overall weight: 2,070 kg, fuel: diesel, energy efficiency: D, color: white, gearing type: mechanical, emission class: euro6d-temp, number of seats: 2, Year of construction: 2023, Equipment: ABS, Bluetooth, USB port, air conditioning, airbag, central locking, cruise control, electric window regulation, electronic stability program (ESP), non-smoking vehicle, onboard computer, power mirror, sliding door, tire pressure monitoring, traction control, truck registration, FIAT DOBLO 1.5 130 HP DIESEL ENGINE, EURO 6D, WITH 21,000 KM, 2 SEATS, PAYLOAD CAPACITY 570 KG, EQUIPPED WITH A LADDER RACK AND A CARGO RACK, COMPLETE SHELVING SYSTEM INCLUDING A DRAWER UNIT, AIR CONDITIONING, ELECTRIC WINDOWS AND CENTRAL LOCKING, ELECTRIC MIRRORS, RADIO WITH BLUETOOTH, STEERING WHEEL-MOUNTED CONTROLS, CRUISE CONTROL, FRONT AND REAR PARKING SENSORS, AND A REARVIEW CAMERA. Hnjdpfjz A Tnbjx Ah Set

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 9,950 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,100 mm, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - ADR - EBS - Lifting axle - Air suspension - Disc brakes = Notes = Nice VAN HOOL 20FT/30FT ADR chassis (year of manufacture 11/2011) with ABS/EBS, SAF INTRADISC, lifting axles on the 1st and 2nd axles, ADR (EX/II, EX/II, FL, AT) valid until 09.09.2027, tires 385/65-R22.5 (tread depth left: 3/6/5 mm; tread depth right: 3/7/6 mm), unladen weight: 3,500 kg, permissible total weight: 39,000 kg, Dutch registration with valid main inspection (APK) until 09.09.2027 = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9,000 kg; Tire tread depth left: 25%; Tire tread depth right: 35% Rear axle 2: Lifting axle; Max. axle load: 9,000 kg; Tire tread depth left: 40%; Tire tread depth right: 45% Rear axle 3: Max. axle load: 9,000 kg; Tire tread depth left: 35%; Tire tread depth right: 40% Weights Unladen weight: 3,500 kg Payload: 35,500 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2015 Maintenance, history and condition APK (Technical Main Inspection): valid until 09.2027 Technical condition: very good Optical condition: good Identification Registration number: OL-78-LS Further information Hnodpjz A Tm Rofx Ah Sjt Please contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2020, S016059 PROD. ALUP TYPE SCK30 CE S/N ITJ370650 Hnjdpfez A Tm Djx Ah Set YEAR 2020 POWER (kW) 22 CAPACITY (m3/min) 3.22 m3/min PRESSURE (bar) 10 HOURS (RUNNING/TOTAL) 0 (new controller) INVERTER NO BUILT-IN DRYER NO EXCHANGER NO COOLED (AIR/WATER) AIR ON TANK NO DOCUMENTS YES CONNECTION NEW/USED Used

Condition: excellent (used), mileage: 8,50,267 km, power: 294 kW (399.73 HP), first registration: 08/2012, fuel type: diesel, tire condition: 50 %, axle configuration: 6x2, fuel: diesel, color: silver, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2012, operating hours: 3,737 h, Equipment: ABS, crane, electric window regulation, power mirror, = Additional options and accessories = - Adaptive damping system - Alarm system - Steering wheel audio controls - Sun visor = Remarks = Crane Number of hydraulic extensions: 3 Remote control: ✓ Beautiful MAN TGX 26.400 configured as a CRANE TRUCK!! In addition to the options already mentioned, it features: -Manual transmission -Palfinger PK34002 SH-B -34 tm crane -3x hydraulically extendable -Remote control -2 beds -stand-alone air conditioner etc etc Optionally available with a trailer German combination directly from the first owner! = More information = Axle configuration Tyre profile: 50% Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 16.170 kg Carrying capacity: 9.830 kg GVW: 26.000 kg Functional Crane: Palfinger PK34002 SH-B, year of manufacture 2011, on rear of chassis Extendable superstructure: Yes Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 Hnedpfx Ahoz A Tmwe Sot 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: new, TECHNIC Single-Disc Floor Scrubber/Polisher The TECHNIC JH-005 model is a powerful, versatile single-disc floor scrubber/polisher designed for heavy-duty cleaning, deep cleaning, and polishing of various floor types (PVC, porcelain stoneware, terrazzo, concrete, linoleum, stone, and many others). TECHNICAL SPECIFICATIONS FOR THE TECHNIC SCRUBBER: Model: JH-005 Manufacturer: TECHNIC Series: Professional Power supply: 1 / 230 / 50 (Ph/V/Hz) Connected power: 1100W Disc rotation speed: 154 RPM Power cord length: 12m Machine weight: 48kg Spare handle set included: Yes Brush/pad working diameter: 410mm Noise level: ~60dB Machine dimensions (H x L x W): 122cm x 55cm x 40cm TECHNIC SCRUBBER EQUIPMENT: 1 x Hard PPL brush (0.8mm) 1 x Medium PPL brush (0.5mm) 1 x Soft PPL brush (0.3mm) 1 x Pad holder with plastic locking mechanism 6 x Americo-type scrubbing pads (6 hardness levels) 1 x Cleaning solution tank 1 x Head drainage hose 1 x Power cord holder 1 x User manual (Polish and English) Hnodpfoz A Tmdsx Ah Sjt APPLICATIONS FOR THE TECHNIC JH-005 SCRUBBER: The machine is ideal for use in: cleaning companies (routine maintenance and deep floor cleaning), schools, government offices, hospitals, clinics, office buildings, warehouses, production halls, workshops, hotels, guesthouses, restaurants, commercial facilities, shopping malls, shops. Thanks to interchangeable brushes and pads, a single device allows you to: scrub and deep-clean, refresh and maintain, prepare surfaces for protective coatings. ADJUSTABLE HANDLE: The polisher features an adjustable handle, allowing the height to be precisely tailored to the operator's height and build. This enables the user to operate the machine in a natural, upright position, significantly reducing back, shoulder, and arm fatigue during extended use. The ergonomic handle setup also ensures better machine control—making it easier to maneuver near walls, in corners, or along narrow corridors. A properly adjusted handle height improves not only comfort but also steering precision, directly impacting work quality and safety. The handle on the JH-005 model is made from a durable blend of polypropylene and reinforced plastic, ensuring high resistance to cracking, deformation, and abrasion. This allows it to maintain its durability even during intensive, daily use. This material blend strikes the perfect balance between strength and lightness, resulting in greater user comfort and easier machine maneuverability. Unlike handles made from standard plastic alone, this material offers superior resistance to impacts and external factors, extending the component's overall lifespan. Additionally, the unit comes with a spare set of handle components (black parts) for future replacement—a practical solution that ensures the scrubber remains fully functional for years to come.

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM500 sawdust extraction system with dust filters is a high-performance unit designed for the effective removal of chips, sawdust and fine dust generated during woodworking operations. Thanks to the use of a third filtration stage – dust filters with an efficiency of up to 2 microns – the unit significantly improves air cleanliness in the workplace. This model meets the highest requirements of professional users while offering high suction power, structural stability and reliable performance during continuous operation. Main Advantages Very high extraction capacity – 5,000 m³/h, ideal for connecting multiple machines simultaneously Advanced dust filtration system (third stage) – captures particles as small as 2 microns Balanced metal impeller – quiet, vibration-free operation 2.8 kW three-phase motor – ensures consistent negative pressure and extraction performance Ability to connect up to 4 machines simultaneously – optimizes production processes Air suction speed of up to 31 m/s – effective dust removal without allowing dust to settle around the workstation Large waste bag capacity – 480 l – longer operating cycles without the need for emptying Mobile steel base – easy movement of the extraction unit around the production hall Construction and Technology The CORMAK FM500 has been designed for demanding industrial conditions. The extraction system is equipped with a metal impeller operating at 2,950 rpm, ensuring high negative pressure and consistent suction power. The unit is built on a robust steel frame with supports for the waste bags, providing stability and resistance to deformation. Thanks to four extraction outlets (1 × 200 mm / 4 × 100 mm), the unit can operate with multiple woodworking machines simultaneously. Precision and Operating Efficiency The FM500 woodworking extraction system stands out with its high suction power and advanced dust filtration system. As a result, it minimizes dust levels in the production hall, extends machine service life and improves air quality. The high extraction capacity of 5,000 m³/h and negative pressure of up to 2,500 Pa ensure effective performance even during prolonged operation with three or four machines. Applications The FM500 is an ideal solution for: woodworking and furniture manufacturing facilities, workshops equipped with planers, saws, sanders, milling machines and thickness planers, production lines requiring simultaneous dust extraction from multiple workstations, environments where limiting the spread of dust and fine airborne particles is critical. Standard Equipment mobile wheeled base, dust filters – third filtration stage (down to 2 microns), 480-litre waste bags, 4-outlet extraction manifold (1 × 200 mm, 4 × 100 mm). Optional Equipment Hnjdpfx Ahoz A Tl Te Sot 100 mm extraction hoses, galvanized hose clamps, Technical Data Motor power 2.8 kW Power supply 400 V / 50 Hz Motor speed 2,950 rpm Extraction capacity 5,000 m³/h Negative pressure up to 2,500 Pa Air suction speed up to 31 m/s Waste bag capacity 480 l Outlet diameter 200 mm / 4 × 100 mm Dimensions (L × W × H) 1,525 × 560 × 2,460 mm Weight 64 kg

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 11/2011, total length: 9,950 mm, total width: 2,550 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 8,100 mm, Year of construction: 2011, Equipment: ABS, = Additional Options and Accessories = - ADR Hodsz A Tlyepfx Ah Sjnt - EBS - Lifting axle - Air suspension - Disc brakes = Notes = Beautiful VAN HOOL 20FT/30FT ADR chassis (year of manufacture 11/2011) with ABS/EBS, SAF INTRADISC, lifting axles on the 1st and 2nd axles, ADR (EX/II, EX/II, FL, AT) valid until 09.09.2027, tires 385/65-R22.5 (tread depth left: 6/5/4 mm; tread depth right: 3/6/6 mm), unladen weight: 3,500 kg, permissible gross weight: 39,000 kg, Dutch registration with valid main inspection (APK) until 09.09.2027. = Further Information = Axle configuration Tire size: 385/65-R22.5 Axle brand: SAF INTRADISC Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 40%; Tire tread depth right: 20% Rear axle 2: Lifting axle; Max. axle load: 9000 kg; Tire tread depth left: 35%; Tire tread depth right: 40% Rear axle 3: Max. axle load: 9000 kg; Tire tread depth left: 25%; Tire tread depth right: 40% Weights Unladen weight: 3,500 kg Payload: 35,500 kg GVW: 39,000 kg Functional Body brand: Van Hool 3B2015 Maintenance, History and Condition APK (Technical Main Inspection): valid until 09.2027 Technical condition: very good Optical condition: good Identification License plate: OL-80-LS Further Information Please contact Arne Honingh for further information.

Condition: used, Drop force 1000 kg Distance between bottom die and top guide 750 mm Working radius 800 mm Hnsdpsz A Tlmjfx Ah Set Total weight approx 40 ton Pneumatic

Condition: new, IVECO 410T54, New, Euro 6, White, Work vehicle, 540 hp, Automatic transmission, Retarder-intarder, Towing capacity, Radio navigation system, Apple CarPlay, Android Auto, Sun visor, Differential lock, Electrically heated mirrors, Air-suspended driver's seat, Air conditioning, Suspension with reinforced leaf spring pack, Rear view camera, Fully equipped, navigation system, with a new 20 cubic meter three-way tipper body, 8 mm Hardox floor, 6 mm Hardox rear gate, flag-type rear gate with hydraulic closure, remote-controlled cover/uncover system. Hjdpfsz A Tlgex Ah Ssnt

Condition: excellent (used), Year of construction: 2016, S016277 PROD. ALUP Hedjz A Tk Ajpfx Ah Sont TYPE ALLEGRO26 CE S/N CAI907698 YEAR 2016 POWER (kW) 26 CAPACITY (m3/min) 0.77-4.73 at 7 bar PRESSURE (bar) 7-13 HOURS (RUNNING/TOTAL) INVERTER yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air CONNECTION 1" NEW/USED used DOCUMENTATION no

Condition: like new (used), functionality: fully functional, Working width 600 mm Two brushing rollers Two 4 kW motors Hjdpfxoz A Tkvs Ah Sjnt Infinitely variable feed speed Roller height adjustment (up/down) Power supply 400V 650 kg Year of manufacture: 2021

Condition: new, Year of construction: 2026, functionality: fully functional, The CORMAK FM340 230V Dust Collector is a modern dust extraction system designed for efficient and quiet dust removal from woodworking machinery in workshop and light industrial environments. Equipped with a 1.5 kW single-phase motor and a large dynamically balanced metal impeller, it delivers an impressive 3,200 m³/h airflow capacity while operating from a standard 230 V power supply. It is an ideal solution for users looking for a compact, mobile, and reliable dust collector for sawdust, wood chips, and fine dust. Key Features Hnjdpoz A Tkpjfx Ah Sot 2-Micron Dust Filter – Effective Separation of Fine Dust Particles for Cleaner Air Airflow capacity up to 3,200 m³/h – efficiently extracts sawdust and dust from multiple woodworking machines simultaneously. 300 mm dynamically balanced impeller – ensures smooth, quiet, and vibration-free operation. Heavy-duty steel housing and metal impeller – designed for durability, rigidity, and long service life. 180° rotating inlet head – allows flexible positioning of extraction hoses to suit various workshop layouts. Mobile wheeled base – makes it easy to move the unit between workstations. Quick-release bag mounting system – enables fast, tool-free replacement of collection bags. Construction and Technology The CORMAK FM340 230V woodworking dust collector features a large metal extraction fan housed in a robust steel casing that provides excellent structural rigidity and durability for intensive daily use. Its 180° rotating inlet head allows the air intake to be positioned for convenient hose routing in different workshop configurations. The unit is supplied with a fabric filter bag and a 190 L plastic collection bag, allowing long operating periods before emptying is required. Performance and Efficiency With a motor speed of 2,850 rpm and a 300 mm impeller, the FM340 delivers powerful, consistent airflow and highly effective separation of sawdust and dust particles. The dust collector easily handles machines that generate large volumes of waste, including: Sliding table saws Thickness planers Spindle moulders The versatile extraction system offers either: One Ø150 mm extraction inlet, or Three Ø100 mm extraction ports providing maximum flexibility when configuring workshop extraction systems. Applications The FM340 230V is ideal for: Woodworking workshops Furniture manufacturing facilities Educational woodworking laboratories Professional and hobby workshops requiring powerful dust extraction from a standard 230 V power supply Standard Equipment One fabric filter bag One plastic collection bag Transport wheels Extraction inlet configuration: Ø150 mm or 3 × Ø100 mm Self-cleaning 2-micron dust filter Optional Equipment Ø100 mm flexible extraction hoses (various lengths) Galvanized hose clamps Additional plastic or fabric collection bags Technical Specifications Specification Value Motor power 1.5 kW / 230 V Motor speed 2,850 rpm Maximum airflow capacity 3,200 m³/h Maximum vacuum pressure 1,900 Pa Noise level 70 dB Impeller diameter 300 mm Extraction inlet Ø150 mm or 3 × Ø100 mm Collection bag capacity 190 L (500 × 1,100 mm) Overall dimensions (L × W × H) 985 × 560 × 2,210 mm Weight 45 kg

Year of construction: 2003, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 041-03, Stock No. 2834 TECNOVA mini 60 granulation system, partially overhauled, in working order, ready for demonstration, consisting of: Material feed hopper Stuffing unit TECNOVA single-screw extruder with 60 mm screw – 36 L/D – cylinder, air-cooled 1 degassing unit with vacuum pump Extruder drive 30 kW, screw speed up to 200 rpm Melt filter/screen changer Hot-face granulator, complete with die plate and knife bar Granulate/pellet blower Control cabinet, relay control A test run/sample production with your material can be arranged on short notice; details and schedule upon request. Hsdpfx Ahez A Ti Ee Sent OPTIONALLY, the system can also be equipped with strand granulation; details upon request. Further granulation systems/extruders ready for demonstration are available ex-works Wuppertal.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 43,720 h, travel distance X-axis: 550 mm, travel distance Y-axis: 220 mm, travel distance Z-axis: 1,585 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 7, This 7-axis Gildemeister GMX 400 linear was manufactured in 2008. It features a Siemens 840D powerline control system and has a total operating time of 96,521 hours. The machine is equipped with a 3nine NINA oil mist separator and an external coolant filtration unit with a Grundfos pump. If you are looking to get high-quality turning and milling capabilities, consider the Gildemeister GMX 400 linear turn-mill centre we have for sale. Contact us for further details. - Control System: Siemens 840D powerline- Total Operating Hours (Control ON): 96,521 h- Spindle Hours / Cut Time: 43,720 h- Hour Counter Manufacturer: Bauser- Additional Systems: 3nine NINA Oil Mist Separator / Extraction Unit- Coolant System: External coolant filtration unit with Grundfos pump and belt filter unit- Bar Feeder: Short bar loader / magazine feeder integrated Hnsdpfx Ahsz A Tife Sst Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: new, Year of construction: 2026, functionality: fully functional, total length: 1,200 mm, overall weight: 600 kg, total width: 1,100 mm, total height: 1,400 mm, warranty duration: 12 months, Equipment: saw blade guard, Saw blade diameter: 350-800 mm Saw blade arbor: 30 mm Working height: 900 mm Cutting heights: see brochure Hsdpfx Ahoz A Th Uj Sjnt Cutting widths: see brochure

Condition: good (used), Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae Hjdpfxoz A Th Ij Ah Sent -Connection: Ø 320/250 mm -Dimensions: 760/440/H470 mm -Weight: 40 kg

Condition: used, mileage: 4,25,000 km, first registration: 07/2021, fuel type: diesel, fuel: diesel, gearing type: automatic, emission class: euro6, Equipment: air conditioning, central locking, fridge, retarder, Road tractor, automatic transmission, retarder, 425,000 km, rear air suspension, spoiler, alloy wheels. Hsdpez A Thzjfx Ah Ssnt The price indicated above is excluding 22% VAT + transfer of ownership fees.

Condition: good (used), Ventilation duct, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, spark trap -Spark trap: with copper lamellae Hedpfx Asz A Thnjh Sent -Connection: Ø 400 mm -Dimensions: 680/510/H540 mm -Weight: 48 kg

Condition: as good as new (ex-display), Year of construction: 2023, Adira E-Brake BB base configuration: Adira Electric Press Brake - AD 75 control system (Y1/Y2, X, R, Z1/Z2) with 3D graphical programming and automatic sequence optimization, (BG1 for BB3515 and BG2 for 5020) - Bluedrive technology - Standard table with basic 60 mm Promecam dies - Promecam quick-release upper tool holder - 2 front supports on a 500 mm guide rail - IRIS safety light curtains - CE safety compliance - Standard tooling kit - Robot interface Hnedpfx Ahez A Thhs Set

Condition: good (used), Year of construction: 2008, Technical data: Printing Section 5 × UV Flexo Printing Units 5 × UV Dryers Web Inspection BST PowerScope 300 – Web Inspection System Unwinder Max roll diameter: 1250 mm Heavy-duty construction with pneumatic shaft and web tension control Integrated splicing table and web guiding system Rewinder Max roll diameter: 1250 mm (≈ 40 inch) Cold Foil / Lamination Module Enables in-line application of cold foil or over-lamination for premium label finishes (metallic, protective film, etc.) Turn Bar (Web Inversion Unit) Hnjdpfez A Thbjx Ah Sst Allows reverse-side printing or lamination – flexible for multi-layer label applications Rerailing Section 24” Supports reprocessing or secondary processing of pre-printed materials Additional Modules Die-cutting unit EM 510 (for use with magnetic cylinder, adjustable for gap) Cross-Cutting Cylinder (inline sheeting or perforation – precise longitudinal or transverse cutting) Punching Units (adjustable punching length from 12” to 26”, ideal for perforations, registration holes, or special die-cut shapes in-line)

Condition: as good as new (ex-display), Year of construction: 2022, Features: - E-Control 20 Dual Screen with bending sequence simulation - 6-axis back gauge with 100 mm stroke (right ±50 mm) - E-Bend S sensor for thickness control on Z1 - Wila NSCR-II HC Premium table - Wila NSCL-II HC Premium tool holder - Pair of front sheet metal supports - Bending force: 500 kN - Usable bending length: 2,040 mm - Usable stroke: 300 mm Hsdpfxsz A Tg Ds Ah Sjnt - Maximum opening: 590 mm - Rapid approach speed: 160 mm/sec - Interface for Industry 4.0 - Standard tool kit

Condition: like new (used), functionality: fully functional, Weiler Primus Lead and Pull Spindle Bench Lathe – Like New Condition!!! Technical Data: >> Year of manufacture approx. 1990, machine no. 4472 >> Center height 120 mm >> Distance between centers 430 mm >> Speed: 60 - 3000 rpm in 18 gear stages >> Spindle bore 23 mm >> Short taper spindle head DIN 55027 >> Tailstock MK 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: Metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm Hnodpfx Ahsz A Tgqj Set >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and equipment: >> 1 three-jaw chuck, 125 mm, like new, with 2 sets of jaws >> Collet chuck with collets from 2 mm to 12 mm, increasing in 1 mm increments >> Mulifix size A with 3 steel holders >> Change gears >> Fixed steady rest >> Faceplate >> Spindle guard >> Operating manual, electrical diagrams, and much more About the machine: A Weiler Primus Lead and Pull Spindle Bench Lathe with a workbench is offered in like-new condition. The machine is, of course, fully functional. All slides run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This Primus model comes from the German Armed Forces, where it was used very little (almost new). This newer generation of Weiler lathes is very user-friendly and can produce surfaces that are as smooth as if they were ground. Take advantage of the opportunity to inspect this machine on-site and under power to convince yourself of its condition. Digital display available for an extra charge.