Used Dmg Mori 3D Printer for sale (188)

Condition: repair required (used), Year of construction: 2008, operating hours: 29,835 h, functionality: not functional, machine/vehicle number: 2337752, Equipment: chip conveyor, The CNC machine is exhibiting the following error: program execution with two tool changes. Up to that point, it ran without any problems. Then, at one point, the second tool change was not performed; instead, the error message "tool changer home position missing" appeared. The auxiliary function and rescue function are not working. Instead, the following error messages appear: "tool holder not open," "tool holder not closed," "tool changer home position missing." After switching on and starting up, the spindle cannot rotate (without compressed air, it can be moved slightly, but it is very difficult to move). After consulting with DMG Mori, it is possible that the pneumatic cylinder used to hold the tool holder is defective, or the spindle itself. Here are the key specifications: DMG DMC 835 V, manufactured in 2007 Bjdpfx Abszx A Tbjtjwt Main spindle: 10,000 rpm, SK 40 tool holder Working area: X 835 mm, Y 510 mm, Z 510 mm Magazine capacity: 20 tools Work table: Clamping area 1000 x 560 mm Distance between T-slots: 100 mm Load capacity (center): 800 kg (approx.) Table height from the floor: 720 mm Equipped with Heidenhain 530 Operating hours: Control on: 29,835 / Machine on: 28,258 / Program execution: 10,067 / Tool changer: 1,066 In addition, we also have a chip conveyor, as well as various tool holders and milling tools (some of which are new or like new).

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 00820002981, turning length: 800 mm, turning diameter: 500 mm, spindle speed (max.): 3,600 rpm, spindle bore: 118 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 30 m/min, bar passage: 102 mm, total height: 2,500 mm, total length: 8,000 mm, total width: 2,400 mm, overall weight: 10,000 kg, controller manufacturer: DMG, controller model: ERGOLINE, input voltage: 400 V, input frequency: 50 Hz, input current: 125 A, nominal power (apparent): 74 kVA, operating hours of spindle: 4,439 h, Equipment: chip conveyor, DMG MORI CTX BETA 800 TC CNC turning and milling center - Note: the spindle hours may increase slightly! - Swing diameter: 500 mm - Distance between centers: 1020 mm - Max. workpiece weight (chuck parts/chuck weight): 100 kg - Max. workpiece center of gravity from spindle flange: 120 mm - Travel X1: from -10 to 490 mm - Travel Y1: +-100 mm - Travel Z1: 845 mm - Travel Z2: 600 mm - Travel Z3: 800 mm - Spindle flange diameter: 220 H 5 mm - Chuck diameter: 315 mm - Diameter of front bearing: 160 mm Bodozxx Dcepfx Abtswt - Rapid traverse speed, Z-axis: 40 m/min - Resolution, Z-axis: 0.001 mmm - B-axis max. swivel speed: 70 rpm - Angular resolution: 0.001° - Tailstock travel: 800 mm - Quill force: 8 kN The machine is equipped with a tailstock and a three-jaw chuck, diameter: 250 mm, as well as a chip conveyor and coolant system. FCA D-63843 Niedernberg - loaded onto a truck.

Condition: used, Year of construction: 2021, operating hours: 7,246 h, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, rotational speed (min.): 10,000 rpm, spindle speed (min.): 20 rpm, Equipment: chip conveyor, CNC machining center, used Manufacturer: DMG MORI Type: M1 - Plus Year of manufacture: 2021 Purchase / Acceptance: May 26, 2022, as a demonstration machine Operating hours: Spindle: 4,049 h Total: 7,246 h Control system: Siemens Sinumerik 828D + Job Shop Working area: X-axis travel: 550 mm Y-axis travel: 550 mm Z-axis travel: 510 mm Spindle: Speed: 20 - 10,000 rpm Power: 13/9 kW Mount: SK 40 DIN 69871 Tool changer: 24-position Equipment: - Renishaw 3D probe - Renishaw tool probe - Chip conveyor, left side - Coolant gun Bedpfxezbvqgj Abtjwt

Condition: new, Year of construction: 2026, operating hours: 293 h, functionality: fully functional, machine/vehicle number: 10000004654, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, feed rate X-axis: 60 m/min, feed rate Y-axis: 60 m/min, feed rate Z-axis: 60 m/min, nominal power (apparent): 130 kVA, torque: 430 Nm, controller manufacturer: Siemens, controller model: CELOS 840D sl Operate, workpiece height (max.): 1,600 mm, workpiece diameter (max.): 1,250 mm, workpiece weight (max.): 2,600 kg, rotary table diameter: 1,250 mm, rotational speed (max.): 500 rpm, overall weight: 31,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 204 h, coolant supply: 150 bar, spindle motor power: 52,000 W, spindle nose: HSK-A 100, number of spindles: 1, number of slots in tool magazine: 123, tool length: 650 mm, tool diameter: 280 mm, tool weight: 30 g, input voltage: 400 V, type of input current: AC, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The machine is not in operation and is not connected to power. Bedpfx Aezg U H Nobtowt The frequency-controlled coolant system with a maximum of 150 bar includes a container with a capacity of 2500 liters and is equipped with a magnetic roller separator and a centrifuge. An oil mist extraction system is installed. A 3-point torque support for angular heads is implemented. A rotating dressing device is installed for truing the grinding wheels. In addition, the machine has a Heidenhain measuring probe TS 640. A tool breakage monitoring system and a Blum laser for workpiece measurement are available. Expansion system for 3D Quickset. Equipped with MPC, SGS, alternating speed during turning, as well as various cycles for grinding, turning, and the MDynamics package. Roughing cycle, multi-tool function.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 6,361 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 840D ShopMill, workpiece length (max.): 900 mm, workpiece width (max.): 560 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 600 kg, total height: 3,000 mm, total length: 4,000 mm, total width: 5,000 mm, table width: 900 mm, table length: 560 mm, table load: 600 kg, overall weight: 5,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 6,361 h, spindle nose: SK40 (DIN69871), number of spindles: 1, number of slots in tool magazine: 30, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Beschrijving Deze Japanse DMG MORI ecoMill 600V hebben wij werkend uit productie overgenomen en is in frisse staat. De CMX 600V (ecoMill 600V) is voorzien van een C-frame constructie (klassieke opbouw) en beweegbare tafel (x-as) wat bedoeld is voor algemeen/all-round freeswerk. Aanvullende opties & accessoires: Siemens 840D SlimLine incl. 3D-simulatie. PROGRESSLine (weergave van de resterende productietijd en het aantal stuks van een volledig bewerkingsproces). Spanentransporteur Spoelpistool Voorbereiding voor interne cooling. Originele documentatie Gewicht & afmetingen: 400x500x300 cm +/- 5.000 kg Bwedpfsy Dg Eusx Abtjt

Condition: excellent (used), Year of construction: 2015, operating hours: 3,104 h, functionality: fully functional, machine/vehicle number: 11415741834, operating hours of spindle: 1,347 h, Equipment: chip conveyor, documentation/manual, DMG MORI DMU 50 – 5-Axis Machining Center – Excellent Condition – Only 1,347 Spindle Hours For sale is a meticulously maintained DMG MORI DMU 50 5-axis machining center from 2015. The machine was relocated to our facility in June 2026 and subsequently fully commissioned, geometrically measured, and technically inspected by the DMG MORI factory service. During this process, all functions were checked, the machine was realigned, the measuring probe was calibrated, and the kinematics were checked and corrected. Afterwards, a successful test run was performed without any issues. The machine is immediately ready for production. With only 1,347 spindle hours and approximately 3,104 operating hours, the machine is in exceptionally good technical condition. Technical data: • Control system: Siemens SINUMERIK 840D solutionline / CELOS • Spindle speed: 14,000 min⁻¹ • Machine weight: approx. 4,450 kg • Voltage: 400 V / 50 Hz Bodpfx Ajziz S Djbtowt Equipment: • 5-axis machining • Siemens SINUMERIK 840D solutionline / CELOS • Internal cooling (IKZ) • High-pressure coolant system • Chip conveyor • 3D measuring probe • Tool measuring device TT160 • Electronic handwheel • USB interface activated • CELOS user interface Maintenance / Service: DMG MORI Service, July 2026 The following work was carried out by the manufacturer: • Machine realigned • Geometry fully checked • Geometry report created • Measuring probe newly calibrated • Kinematics checked and corrected • Tool measuring device TT160 refurbished • Complete function test performed • Operator training provided The machine was subsequently fully inspected and approved by DMG MORI.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 3,600 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 900 mm, controller model: HEIDENHAIN TNC 640 CELOS, rotational speed (min.): 20 rpm, rotational speed (max.): 10,000 rpm, DMG MORI DMF 360|11 linear – Traveling Column Milling Machine For sale is a DMG MORI DMF 360|11 linear with extensive equipment and a HEIDENHAIN TNC 640 / CELOS control system. Technical data Travel ranges X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Rapid traverse rate X/Y/Z: 80 / 60 / 60 m/min Linear drive in the X-axis Milling head / Spindle NC swivel milling head, B-axis Spindle speed: 20 – 10,000 rpm Spindle power: 44 / 32 kW Torque: 288 / 187 Nm Tool holder: SK50 / DIN ISO 7388-1-A50 Tool magazine 120 tool positions Chain magazine with dual gripper Mechanical setup aid for tool loading Work table Fixed table with integrated rotary table Rotary table: Ø 1,050 mm Rotary table arranged on the left side Max. load capacity of rotary table: 1,200 kg Hydraulic clamping Control system HEIDENHAIN TNC 640 CELOS 21.5" ERGOline® Control Multi-touch screen Equipment / Options Internal coolant supply 40 bar / 980 l Paper band filter Chip conveyor HEIDENHAIN TS 460 infrared measuring probe Preparation and software option for 3D quickSET MPC – Machine Protection Control Compressed air through the spindle center Bwodpfxezv Eglo Abtjt Oil and emulsion mist extraction system, 2 × 1,600 m³/h 2 rotating viewing windows Purge air for linear measuring systems Direct measuring systems Active cooling for main spindle and linear motor Automatic door drive Electronic handwheel IoTconnector Machine Data Connector (OPC UA / MTConnect / MQTT) NETservice Machine can be inspected by arrangement. Further information, photos and videos available on request.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. Bwedszx Sryepfx Abtet - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V

Condition: used, Year of construction: 2012, total height: 4,500 mm, total length: 8,000 mm, total width: 6,000 mm, overall weight: 50,000 kg, Machine No.: 11720001123 Control Heidenhain iTNC 530 HSCI (3D path control) Travel Paths X: 1,850 mm Y: 2,100 mm Z: 1,250 mm B-axis: controlled universal swivel milling head C-axis: NC rotary table Ø 1,700 mm 5-axis simultaneous machining Spindle Motor spindle SK50 Speed: 20–12,000 min⁻¹ Power: 44 kW (40% duty cycle) / 32 kW (100% duty cycle) Torque: 288 / 187 Nm Tool holder: SK50 according to DIN 69871 Tool Changer 60-fold chain magazine Double gripper Equipment IKZ 40 bar Chip conveyor Tool measurement system Blum Laser NT Hybrid Heidenhain TS 640 infrared probe Electronic handwheel Minimum quantity lubrication (MQL) Oil/emulsion mist separator Bedpfx Ajzv A Akjbtowt Coolant through spindle Coolant tank 980 l Rotating viewing window 3D quickSET Machine Protection Control (MPC) Adaptive Feed Control (AFC) ATC (Application Tuning Cycle) DMG MORI NetService DMG MORI SMARTkey Documentation and electrical schematic (German) Travel X-axis: 1850 - mm Dimensions (LxWxH) approx.: 8000 x 6000 x 4500 mm Travel Y-axis: 2100 - mm Weight approx.: 50,000 kg Travel Z-axis: 1250 - mm Year of construction: 2,012 Condition: in working order Terms of payment: 100% prepayment before pick-up Terms of delivery: EXW EX Works under power: Yes

Condition: excellent (used), Year of construction: 2019, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: SIEMENS, controller model: SINUMERIK 840D, table width: 560 mm, table length: 900 mm, rotational speed (min.): 20 rpm, rotational speed (max.): 12,000 rpm, overall weight: 5,500 kg, coolant supply: 10 bar, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 30, Vertical machining center DMG MORI CMX 600 V Year of manufacture: 2019 Control system: Sinumerik 840D - SLIMline Multitouch control Operating hours: 11,000 h Technical data: Spindle speed: 20 - 12,000 rpm Drive power: 13 kW Torque: Internal coolant supply: 10 bar Tool holder: SK 40 Number of magazine positions: 30 Travel distances: X-axis: 600 mm Y-axis: 560 mm Z-axis: 510 mm Bodozmp A Ejpfx Abtswt Accessories: - 3D probe - Coolant tank

Condition: used, Year of construction: 2012, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 14.000 min/-1 power capacity - main spindel 18,9 / 14 kW max. Torque 100 Nm tool taper HSK A-63 table surface area 630 x 500 mm max. table load 300 kg Swivel range -5 / +110 ° rotation range 360 ° T-slots 7x 14 x 63 mm Bjdpfxjzyu Umo Abtewt number of toolpositions 30 pos. max. tool weight 6 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm rapid traverse 24 m/min Feed force 4,8 kN feed speeds 1 - 24.000 mm/min total power requirement 25 kVA weight of the machine ca. 5,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,3 m CNC - Milling Machine Universal DMG MORI SEIKI - DMU 50 - 5 Axis - swivable rotary table

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, We offer you: CNC bed milling machine Manufacturer: DMG MORI Type: CMX 70 U Year of manufacture: 2022 Control system: Celos with Siemens 840D sl Operate Technical data: Travel distances: X-axis: 750 mm Y-axis: 600 mm Z-axis: 520 mm B-axis: -10 to +95° C-axis: 360° Main spindle: Tool interface: SK 40 Speed range - main spindle: 20 - 15,000 rpm Drive power - main spindle (40/100%): 20 / 14.5 kW Torque - main spindle (40/100%): 121 / 84 Nm Work table: Table size: D 800 x 620 mm Tool changer: Number of tool positions: 30 Max. tool diameter: 80 / 130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 120 kg Feed rates: Rapid traverse (x/y/z): 30 m/min Operating hours: approx. 5,300 h Spindle hours: approx. 3,010 h Technical features & accessories: - Direct linear measuring system in x, y, and z, incl. air purging - Compressed air switching via M function Bwedpfjzcy I Ssx Abtst - Chip disposal package, includes: - Chip conveyor, tank 300 l - Spray gun - Signal light, 4-color - Tropical package, includes: - Active control cabinet cooling - Additional cooler on the control panel - Hydraulic oil temperature sensor - Cooling unit 3.3 kW for the main drive - Preparation for oil mist separator - Measuring probe kit, manufacturer Heidenhain, includes: - TS460 workpiece measuring probe - Measuring cycles - Tool length/diameter kit, manufacturer Heidenhain, includes: - TT160 for tool measurement - Measuring cycles, incl. tool breakage monitoring - Automation package, includes: - Loading and unloading via automatic magazine door - Automatic closing of the tool magazine - Cabin roof - Electronic handwheel - ATC (Application Tuning Cycle) - Preparation for 3D quickSET Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is stated in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, turning length: 1,11,111 mm, We offer you the following: Manufacturer: DMG MORI Model: NTX 3000/1500 Year of manufacture: 2023 Control: DMG Mori Celos with Fanuc F31iB5 Technical specifications: Max. turning diameter: 670 mm Turning length: 1,519 mm Bar capacity: max. 102 mm Travels: x1-axis: 675 mm y-axis: +/- 150 mm z1-axis: 1,562 + 164 mm b-axis: +/- 120° a-axis: 1,542 mm x2-axis: 200 mm y2-axis: +/- 40 mm z2-axis: 1,542 mm Main spindle: Max. speed: 3,000 rpm Drive power: 30/25 kW Torque: 1,194/995 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 111 mm Counter spindle: Max. speed: 4,000 rpm Drive power: 18.5/18.5/15 kW Torque: 599/505/409 Nm Spindle nose: JIS A2-8 Spindle bore: Ø 91 mm Milling spindle: Speed range: 0 – 12,000 rpm Drive power: 28/23 kW Torque: 132/95.3 Nm Tool holder: Capto C6 Number of tool stations: 76 positions Max. tool diameter: Ø 70/Ø 130 mm Max. tool length: 400 mm Max. tool weight: 8 kg Turret: Number of tool holders: 12 positions Speed of driven tools: 12,000 rpm Tool holder: BMT40 Torque: 16.9 Nm Rapid traverse speeds: x-axis: 50 m/min y-axis: 40 m/min z-axis: 50 m/min a-axis: 36 m/min x2-axis: 25 m/min y2-axis: 18 m/min z2-axis: 40 m/min b-axis: 100 rpm Operating hours: approx. 4,500 h Spindle hours: approx. 2,200 h Technical features & accessories: − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-400-128 incl. hollow clamping cylinder for main spindle − Hydraulic 3-jaw chuck, manuf. SMW KNCS-N-260-78-3Z incl. hollow clamping cylinder for counter spindle − Foot switch for chuck operation − Automatic clamping stroke monitoring of the clamping cylinder for main and counter spindle − Tailstock function for counter spindle − Magazine-side control panel for the tool magazine − Coolant: water-soluble coolant − Chip conveyor (right discharge) − Coolant temperature control/coolant chiller − Coolant spray gun − Float switch for coolant − Coolant shower at main and counter spindle chucks − Compressed air blow-off system for chuck (counter spindle) − Oil mist separator zeroGOF #2 − Oil separator − ICS 70 bar, TMF300 band filter system, 980 l tank − Manual tool presetting device for main and counter spindle − Direct measuring system in x1, x2, y, z1, z2 axes − Spindle sensor measuring system with wireless signal transmission, manuf. Renishaw RMP600 − Universal filter − 3D quickSET − Cycle Alternating Spindle Speed Bodpfx Asy Sfx Njbtowt − Cycle "Tailstock Tip at Turret" − Cycle MPC – Machine Protection Control − Cycle MVC – Machine Vibration Control − Synchronous thread cutting without compensating chuck − Increased input resolution to 0.0001 mm − Cs control for tool spindle − Program restart Accessories, illustrated tools, and clamping devices are only included if specified in the additional information. Technical data and details subject to change, errors and prior sale excepted!

Condition: like new (used), Year of construction: 2022, operating hours: 3,955 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, nominal power (apparent): 13 kVA, torque: 83 Nm, controller manufacturer: SIMENS 828D OP, workpiece weight (max.): 600 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 3,955 h, number of spindles: 1, number of slots in tool magazine: 24, We are selling a very well preserved DMG MORI M1 CNC milling center, year 2022, with only 3111 hours of operation. Bwsdjwl N Tqepfx Abtot The machine is in excellent condition and can be tested before purchase. Technical details: X-Travel 550 mm Y-Travel 550 mm Z-Travel 510 mm table-size 790 x 560 mm spindle taper ISO SK 40 turning speed range 12000 1/min Feeds longditudinal/cross/vertical 1 - 30000 mm/min Rapid Motion -Longitudinal/Cross/Vertical 30 m/min No. of tools in magazine 20 Workpiece diameter at full load 80 mm Workpiece diameter with 2 vacant positions 140 mm Workpiece length 300 mm Weight of tools max. 7 kg Table load 600 kg spindle drive 9 / 11 kW control SIEMENS 828D total power requirement 30 kVA Additional information cnc SIEMENS 828 D Chip conveyer Cooling throug the spindle 20bar RENISHOW Measuring probe Tool taster

Condition: used, Year of construction: 2017, We offer you: CNC Bed Milling Machine Manufacturer: DMG MORI Model: DMF 260-11 linear Year of manufacture: 2017 Control: Celos with Siemens 840D sl Operate Main spindle renewed Technical specifications: Travel distances: - X-axis travel: 2,600 mm - Y-axis travel: 1,100 mm - Z-axis travel: 900 mm Main spindle: - Speed range: 20 - 15,000 rpm - Drive power (40/100%): 46 / 30 kW - Torque (40/100%): 200 / 130 Nm - Tool holder: SK 40 Worktable: - Fixed table with integrated rotary table Bedjwtd A Njpfx Abtowt - Clamping surface: 3,200 x 1,100 mm - Rotary table diameter: 1,050 mm - Max. table load: 1,200 kg Tool changer: - Number of tool stations: 60 positions - Chip-to-chip time: 7.5 s - Power-on hours: approx. 21,000 h - Operating hours: approx. 9,200 h Technical features: - ICS (internal coolant supply) 40 bar - Coolant spray gun - Rotating viewing window - Tropical package - Dynamic package Accessories: - Paper band filter 600l - Chip conveyor - Heidenhain TS 649 DMG touch probe - 3D quickSET - 2x Oil and emulsion mist separators - 4-color signal lamp - Electronic handwheel Accessories, pictured tools, and clamping devices are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: good (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 00320002700, spindle bore: 91 mm, spindle speed (max.): 5,000 rpm, travel distance X-axis: 307 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,240 mm, total height: 2,500 mm, total length: 6,000 mm, total width: 2,200 mm, overall weight: 8,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 99 A, workpiece length (max.): 1,225 mm, nominal power (apparent): 65 kVA, workpiece diameter (max.): 480 mm, workpiece weight between centers: 500 g, operating hours of spindle: 1,103 h, Equipment: chip conveyor, documentation/manual, DMG MORI CLX 550 CNC lathe - Bed inclination: 45° - Bed diameter: 700 mm - Max. slide diameter V1 to V3: 500 mm - Max. workpiece diameter: 480 mm, in the front workpiece diameter: 320 mm - Distance between centers: 1450 mm - Y-axis travel: 120 mm (+- 60 mm) - Z3-axis travel: 1200 mm - Spindle height from axis to ground: 1043 mm - Main spindle, bar capacity: 80 mm - Bar diameter: 81 mm - Front bearing diameter: 130 mm - Resolution axis C1: 0.001° - The machine has a tailstock - Distance between two spindle centers: 1495 mm Bjdpfx Aszxy R Rsbtjwt - Z1 axis travel: 1200 mm - Max. workpiece length: 1140 mm - Max. workpiece diameter: 450 mm - Bar capacity of the tailstock: 50 mm - Bore diameter of the tailstock: 73 mm - Bar diameter: 52 mm The machine is equipped with a tailstock (fitted with a three-jaw chuck SMW AUTOBLOK, diameter: 210 mm), as well as a 12-position tool turret, including powered tool stations, and an SMW AUTOBLOK three-jaw chuck, diameter: 250 mm. It also includes a chip conveyor, filter extraction, and documentation and CDs. FCA D-73529 Schwäbisch Gmünd - loaded onto a truck

Condition: used, Year of construction: 2017, control Heidenhain CNC-Pilot 640 turning length 500 mm spindle tunring speed 5.000 U/min drive capacity - main spindle 100/40% ED 25/34 kW Bwodpfozyvcfjx Abtet tool taper VDI 30 number of tool places 16 Pos. Number of working hours ca. 29.259 h spindle hours ca. 7.351 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - C-axis and spindle brake (hydraulic) - Y-axis ± 60 mm - Programmable tailstock - Hydraulic hollow clamping unit (Ø 77 mm) - Differential pressure clamping for the main spindle - 16-station disc turret, driven tools for all 16 stations - Coolant system 8/20 bar - Belt filter system (40 µm filtration fineness) - Level monitoring - Connection port for oil mist extractor - Coolant spray gun - TurnPlus Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Subject to change, errors in technical data/specifications, and prior sale.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Technical details turning diameter 400 mm turning length - mm control DMG Mori SLIMline z-axis ca. 750–755 mm x-axis 276 mm y-axis +/-60 mm greates pass round over bed 700 mm Additional information The machine is in very good condition and has recently been inspected and measured by a service technician. The lathe was primarily used to manufacture turned plastic parts. CNC lathe with driven tools, C-axis, Y-axis, and counter-spindle CNC control: DMG Mori SLIMline multi-touch control (19"/Operate 4.7 on Siemens) Screen language: German/English Bwedpfxszu Nxps Abtet Main spindle: A2-8 with AC motor Drive power 25.5/17 kW (100/40% duty cycle) Spindle speed 4000 rpm Hollow clamping system, max. bar capacity 80 mm Counter-spindle: A2-6 designed as a built-in motor spindle ISM 52 with hydraulic clamping device Drive power 14/13 kW (100/40% duty cycle) Spindle speed 5000 rpm 12-station servo tool turret: VDI 40 mount with 12 driven tool stations Equipment: Y-axis +/- 60 mm Direct position measuring system (X and Y axes) Bar package & interface IEMCA KID80/16 short bar loader, bar capacity 80 mm Differential pressure clamping for main spindle Chuck flushing for main spindle Reduction tube for main spindle Hainbuch SPANNTOP nova Combi G80 Axzug collet chuck Differential pressure clamping for counter-spindle Chuck flushing for counter-spindle Automatic workpiece ejector Counter-spindle with internal coolant supply for workholding flushing SMW BB-D210 hydraulic 3-jaw chuck for counter-spindle SMW BB-D250 hydraulic 3-jaw chuck High-pressure pump 12 bar Coolant spray gun bar Dual cartridge filter for coolant, filtration fineness 60 µm Manual tool measuring device in the workspace, Marposs make Tool monitoring system, Easy Tool Monitor 1.0 technology cycle Alternating Speed ??technology cycle 3D data model in STEP format DMG MORI Messenger V2 DMG MORI Netservice – client Finished part discharge conveyor Chip conveyor with right-hand discharge External electronic handwheel Tool holder package

Condition: like new (used), Year of construction: 2020, operating hours: 9,422 h, functionality: fully functional, We are selling, on behalf of a client, a used, recent-model, like-new 5-axis machining center with a GANTRY design; model DMU 340 Gantry; year of manufacture 2020; 9422 operating hours; 2991 spindle hours. It features a SIEMENS CELOS operator interface. All specifications, technical data, or configurations of the machine are available upon request. Bodpozx Ek Ajfx Abtswt The machine is available for demonstration and can be inspected immediately. Further original photographs are available upon request and after verification of your identity. A resale to dealers is not currently planned. Please refrain from making such inquiries.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 7717000257A, overall weight: 1,550 kg, load capacity: 1,500 kg, input voltage: 400 V, input current: 20 A, type of input current: three-phase, Equipment: documentation/manual, DMG Mori PH150 Pallet Handling System (2023) – 4 Station –Very Low Use 2023 DMG Mori PH150 automatic pallet handling system in excellent condition with minimal prior use. Available immediately. Currently in storage and ready for installation into a new facility or existing machining cell. Specification: 4-position pallet handling system 4 x pallets included 1 x Pneumatic chuck for machine bed Pallet size: 500 x 500 mm Max pallet load: 250 kg Max load per level: 1,500 kg Axis travel: X 2,170 mm / Z 75 mm / C 360° Power supply: 400V Condition: Installed 2023 Very low usage prior to decommissioning Stored in good condition Not currently installed or under power Key Benefits: Significant saving vs new Immediate availability (no OEM lead times) Ideal for increasing spindle utilisation and automation capability Compact, high-efficiency pallet system Important Information: Equipment is currently in storage and not commissioned Bodpfx Abeyvhuhetswt Sold as seen Buyer responsible for transport, installation and commissioning Assistance with loading can be discussed if required Additional Information: Second identical unit also available if required Viewing can be arranged by appointment Specification and details are provided in good faith but are not guaranteed. Buyers are encouraged to verify all details prior to purchase.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG Mori M1 milling machine (version with 12,000 rpm, spindle cooling). Year of manufacture: 2022. Very good condition, inspected by DMG service. Low operating hours, only 1,316 spindle hours. Machine can be connected and tested on-site. Bjdpfx Aszr Rugobtowt

Condition: used, Year of construction: 2013, operating hours: 10,322 h, functionality: fully functional, machine/vehicle number: NL254130510, We are offering this used DMG MORI NLX 2500 SY/700 CNC turning and milling center, manufactured in 2013, complete with a short bar loader magazine ILS-MKU 70/100, manufactured in 2015. Turning diameter max. 366 mm Turning length 705 mm Swinging diameter over bed 920 mm Swinging diameter over cross slide 742 mm Bwodjzwvv Tspfx Abtjt Spindle speed range - main spindle 3,500 rpm Drive power - main spindle 18.5 / 15 kW Spindle nose JIS A-8 Spindle bearing diameter 140 mm Spindle bore 90 mm Max. usable bar diameter 80 mm Spindle speed range - counter spindle 6,000 rpm Drive power - counter spindle 11 / 7.5 kW Spindle nose JIS A2-5 Spindle bearing diameter 85 mm Spindle bore 43 mm Max. usable bar diameter (-) mm X-axis travel 260 mm Z-axis travel 795 mm Y-axis travel +/- 50 mm Rapid traverse (X / Y / Z) 30 / 10 / 30 m/min Number of tool positions 12 Tool holder BMT 60 Spindle speed range - driven tools max. 10,000 rpm Drive power - driven tools 5.5 / 3.7 kW Total power consumption 40 kVA Machine weight approx. 6.4 t Short bar loader magazine ILS-MUK 70/100 Type: MUK 10016-II Year of manufacture: 2015 Material diameter: 6-100 mm Material length: 250-1650 mm Length: 2400 mm Width: 1600 mm Outreach: 330 mm Weight: approx. 680 kg If you have any questions or require further information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: 845000756E, turning diameter: 400 mm, spindle bore: 103 mm, spindle speed (max.): 3,200 rpm, travel distance X-axis: 265 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 1,050 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,400 mm, total length: 6,000 mm, total width: 2,400 mm, overall weight: 8,000 kg, bar passage: 90 mm, center height: 360 mm, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, input voltage: 400 V, input frequency: 50 Hz, input current: 80 A, nominal power (apparent): 50 kVA, operating hours of spindle: 4,617 h, Equipment: documentation/manual, DMG MORI ECOTURN 510 CNC lathe - Chuck diameter: 250 mm - Diameter in the front bearing: 140 mm - Feed drive in the X and Z axes: 40 x 10 mm - Feed forces X/Z: 7.5 kN - Y-axis feed force: 7000 N - Rapid traverse C1 axis: 100 m/min - Travel measuring system X/Y/Z: absolute rotary Bwedpfx Ajzxzc Ijbtet - Positioning uncertainty X: 0.008 mm, Z: 0.010 mm - Working area, distance between centers: 1150 mm - Max. swivel range above the bed: 680 mm - Swivel range above the X slide: 465 mm - Travel of the Y-axis: 120 mm (+/- 60 mm) The machine is equipped with a tailstock and a 12-position tool turret, including the tool holders located in the turret, as well as a three-jaw chuck SMW AUTOBLOK, diameter: 300 mm, including a chip conveyor, filter extraction, and documentation. FCA D-73529 Schwäbisch Gmünd - to be loaded onto a truck.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 3,243 h, spindle speed (max.): 20,000 rpm, travel distance X-axis: 750 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle motor power: 35,000 W, number of slots in tool magazine: 60, number of axes: 5, This 5-axis DMG MORI DMU 75 monoBLOCK was manufactured in 2017. It features a Siemens SINUMERIK 840 D control system and a high-pressure pump for internal coolant supply at 20 bar. The machine includes a 3D measuring probe from Heidenhain and has 60 magazine positions. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMU 75 monoBLOCK universal machining centre we have for sale. Contact us for further details. - Spindle Power: 35 kW (40% duty cycle), 25 kW (100% duty cycle)- Tool Taper: SK 40 according to DIN 69871 (Optional HSK-A 63 according to DIN 69893)- Tool Magazine: Chain magazine with double gripper, 60 tool pockets (SK40 / HSK-A63)- NC Swivel Rotary Table: Integrated in rigid table, 800 mm x 650 mm- Control System: CELOS with Siemens 840D sl Operate, including 21.5" ERGOline Control with Multi-Touch Screen- Features: MPC (Machine Protection Control), Chip flushing, Integrated coolant tank 500 l- Coolant / Chip Disposal included: * Production Package: Scraper belt chip conveyor with coolant system 600 liters, paper band filter, discharge height 950 mm, width 670 mm * Internal Coolant Supply (IKZ): 40 bar / 20 l/min through spindle center (AD) * External Coolant Supply: 4 bar / 40 l/min * Washdown Pistol with pump (2 bar / 10 l/min) * Oil and Emulsion Mist Extraction System: Mechanical filter, airflow rate 600 m³/h- Measuring / Monitoring: * Infrared Measuring Probe: Heidenhain TS 649 (SK40 / HSK-A63) * 3D quickSET: Tooling check and inspection of kinematic accuracy for 4/5-axis machine configurations Technical Specification Bwjdpfxozdzmwo Abtst Through-spindle Coolant Yes Taper Size SK 40

Condition: used, Year of construction: 2022, functionality: fully functional, DMG MORI DMF 360/11 linear – Universal machining center, year of manufacture 2022, in excellent condition, always maintained on schedule, available for inspection at any time. Key technical data: Bwsdpfxezv U N Ne Abtjt Control system: Heidenhain TNC 640 Celos, 5 controlled axes Travel ranges: X 3,600 mm / Y 1,100 mm / Z 900 mm Rapid traverse rate X/Y/Z: 80/60/60 m/min Spindle: 20–10,000 rpm, 44/32 kW, 288/187 Nm, SK 50 NC rotary table: 4,200 x 1,100 mm, max. table load 1,200 kg Tool magazine: 120 positions Equipment: Internal cooling 40 bar, chip conveyor, measuring probe Heidenhain TS 460, automatic doors