TBI Technology Sp. z o.o.

Condition: good (used), Year of construction: 2012, - Heidenhain iTNC 530 MC 422 control - Integrated rotary-swivel unit and fixed machine table - 5-axis simultaneous machining - Clamping area, rotary table Ø600 mm - Travel distances: X=1320 mm, Y=650 mm, Z=520 mm - Spindle speed up to 14,000 rpm - Tool holder SK 40 DIN6987 - 30-position tool changer - IKZ – high-pressure coolant system - Electronic touch probe - Toolsetter M&H 35.70 - Work area partition wall - Full enclosure - Chip conveyor - 2 chip carts - Workbench with hand tools - Steel sheet cabinet - Approx. 90 various tool holders - Various accessories and spare parts Dsdpfjyialbsx Afpsun - Documentation

Condition: excellent (used), Year of construction: 2010, total height: 3,300 mm, total length: 5,600 mm, total width: 4,300 mm, table load: 2,000 kg, overall weight: 10,500 kg, Spindle SK 40 Speeds 8000 Rpm with 165 Nm Workload 2000 Kg ATC 56 Positions Hours spindle 10.304 Closed housing with automatic top door Dodjyh U E Hjpfx Afpoun IKZ Coolant system LTA Air Cleaning Length:5600mm Width:4300mm Height:3300mm Weight:10500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2014, operating hours: 40,000 h, functionality: fully functional, I am pleased to offer you a very well-maintained, nearly new AXA VPC 45 U. The machine is available immediately. An on-site inspection under power and in operation is possible at any time, and video footage is available. Machine hours (ON): approx. 40,000 Spindle hours (ON): approx. 25,000 Travel ranges (linear axes): X-axis: 2,940 mm Y-axis: 1,400 mm Z-axis: 900 mm 5-axis simultaneous machining: This machine is a true 5-axis machining center, enabling simultaneous 5-axis milling with X/Y/Z + B-axis (stepless swivel head) + C-axis (NC rotary table). This allows workpieces to be machined in a single setup with continuous movement from various spatial orientations. Machine (basic data) Machine type: Vertical gantry machining center Manufacturer: AXA Entwicklungs- und Maschinenbau GmbH Model: VPC 45 U Year of manufacture: 2014 General technical data Overall length: 6,800 mm Overall width: 3,600 mm Overall height: 4,100 mm Duedpfx Aoyh Nrzsfpjn Total weight: 29 t Electrical data Connection voltage: 3×400 V / 230 V / N / PE, 50 Hz Connected load: 69 kVA Main fuse: max. 125 A Control voltage: 24 V Spindle Spindle design: Hollow shaft motor, water-cooled Speed range: 30–10,000 rpm Tool holder: SK40 Drive motor: DME 112 AL-4FGS (Kessler) Max. power at 40% duty cycle: 40.0 kW Max. power at 100% duty cycle: 26.6 kW Max. torque at 40% duty cycle: 191.0 Nm Max. torque at 100% duty cycle: 127.0 Nm NC rotary table Rotary table: RTA 6S-1500 Table diameter: Ø 1,500 mm Weight: 2,700 kg Max. payload (vertical rotary axis): 10,000 kg Tool changer Tool changer: Type M Number of tools: 100

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 2,000 mm, travel distance Y-axis: 850 mm, travel distance Z-axis: 850 mm, spindle speed (max.): 16,000 rpm, spindle motor power: 64,000 W, number of axes: 5, This 5s C.B. Ferrari GT2000 vertical machining centre was manufactured in 2019. It features a 5-axis CNC control with a Heidenhain TNC 640, offering extensive travel capabilities of 2,000 mm on the X-axis and 850 mm on the Z-axis. The machine includes a 30-position rotary tool magazine and an electrospindle with a speed of 16,000 rpm. Consider the opportunity to buy this C.B. Ferrari GT2000 vertical machining centre. Contact us for further details. • Continuous head support • Spindle: • Type: Electrospindle • Tool interface: HSK-A63 • Torque: 170 / 236 Nm • Tool system: • Tool magazine: 30 positions, rotary type • Table: • 1-axis rotary table • Table size: 1,840 mm • Cooling & lubrication: Dedpfx Afoyh Nb Nopjun • Spindle cooling with emulsion • High-pressure coolant system: 75 bar • Coolant tank capacity: 460 liters • Air cooling system • Ball screw lubrication for high production Additional equipment • Chip conveyor • Heidenhain remote handwheel • Wash-down gun with pump • Mechanical probing device • 3D probe pre-installation • Electrical pre-installation for 3D probe • Industry 4.0 preparation package • Air-cooled spindle refrigeration unit • Frequency inverter for spindle – option 42

Condition: refurbished (used), Year of construction: 2007, CNC FANUC EZ, travels X axis 4200 mm, Y axis 1400 mm, Z axis 585 mm, A axis ±40 degrees, B axis ±40 degrees, table 4000 x 1250 mm, spindle 10,000 rpm HSK 100, power 27 kW, tool magazine for 60 tools. Machine can be viewed in operation and is available immediately. Dsdpjyh Hcqefx Afpoun

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,400 mm, travel distance Z-axis: 900 mm, rapid traverse X-axis: 16 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 50 kVA, controller manufacturer: Fanuc α 30/3000i 7.0, workpiece length (max.): 4,000 mm, workpiece width (max.): 1,350 mm, workpiece weight (max.): 8,000 kg, total height: 4,500 mm, total length: 8,130 mm, total width: 4,150 mm, table width: 1,200 mm, table length: 3,200 mm, table load: 8,000 kg, overall weight: 17,000 kg, spindle speed (max.): 8,000 rpm, spindle motor power: 18,500 W, mount diameter: 50 mm, tool length: 350 mm, tool diameter: 127 mm, tool weight: 20 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Pinnacle DV 1432 Dujdpfx Afoyhpcvspjn

Condition: used, Year of construction: 2021, functionality: fully functional, Control: FANUC 0i x-travel: 900 mm y-travel: 460 mm z-travel: 520 mm Table dimensions (LxW): 1.050 x 459 mm max. table load: 600 kg rapid travel x/y/z: 36 / 36 / 36 m/min max. spindle speed: 8.000 rpm Tool magazine for 30 + 1 tools chip conveyor Hand-held spray gun with coolant RENISHAW touch and spindle probe Dsdpfx Aoyhpabefpeun

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Dujdpfjyhnfcex Afpsn Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Coolant system Chip conveyor Electronic handwheel

Condition: good (used), Year of construction: 1999, travel distance X-axis: 2,000 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, Control: SIEMENS 840D x-travel: 2000 mm y-travel: 500 mm Dedsyhcd Hepfx Afpeun z-travel: 500 mm feed: 1 - 8000 mm/min table size: 2120 x 550 mm table load: 2000 kp rapid traverse X-axis: 40 m/min rapid traverse Z-axis: 20 m/min tool taper: HSK 63 A spindle speeds - continuously variable: 0 - 15000 rpm spindle drive: 20 kW spindle bearing diameter: 70 mm position accuracy: 0.020 mm Control: SIEMENS 840D Tool diameter: 63 / 126 mm Tool magazine: Chain magazine: 40 pieces Total power requirement: 65 kVA Accessories: Chip conveyor

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 026694, travel distance X-axis: 3,200 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530i, rotational speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,200 mm Dusdpfoyg D Evjx Afpsn Travel Y-axis: 800 mm Travel Z-axis: 600 mm Spindle mount: SK40 Speed: 50 – 12,000 rpm Number of tools in magazine: 30 pcs Table clamping surface: 3,900 x 750 mm Rapid traverse x/y/z: 12/12/12 m/min MACHINE DETAILS Control: Heidenhain iTNC 530i Total power requirement: 29 kW Dimensions & weight Space required: approx. 7,200 x 3,500 x 3,100 mm Machine weight: approx. 15,000 kg EQUIPMENT Chip conveyor 30-position tool changer High-pressure belt filter system Through-spindle coolant (IKZ) 15 bar SK40 tool holders Operating manual

Condition: ready for operation (used), Year of construction: 2007, operating hours: 5,577 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Matec HV 30 was manufactured in 2007, featuring a Heidenhain iTNC 530 control, a new spindle installed in August 2021 with 5,577 hours, and a spindle speed of 12,000 rpm SK40. It offers X-axis travel of 3000 mm, Y-axis travel of 1000 mm, and Z-axis travel of 1100 mm. Consider the opportunity to buy this Matec HV 30 vertical machining centre. Contact us for more information about this machine. • Operating hours: 83,000 h • Total spindle hours: 32,800 h • New spindle installed: Aug 2021 → current spindle hours: 5,577 h • Material history: ~95% aluminum machining • B-axis: ±105° • C-axis: 360° • Handwheel • Tool magazine: 60 positions, SK40 • Internal coolant supply Duodpfx Afoyfunrspsn Additional equipment • Oil mist extraction • Renishaw probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2007, Used Mazak Machining Center X-axis travel: 1,740 mm Y-axis travel: 760 mm Z-axis travel: 660 mm Rapid traverse X-axis: 36 m/min Rapid traverse Y-axis: 36 m/min Rapid traverse Z-axis: 36 m/min Table size: 2,000 x 760 mm Table load capacity: 1,400 kg Distance from table surface to spindle nose: 160 mm - 840 mm Including magnetic table Spindle speed: 12,000 rpm Main drive power (5 min rating): 18.5 kW Main drive power (30 min rating): 11 kW Tool changer: Number of stations: 30 Spindle taper: SK 40 Max. tool diameter: 80 mm Max. tool diameter with adjacent stations empty: 110 mm Max. tool length: 350 mm Dusdpfjyfmz Dsx Afpen Max. tool weight: 8 kg Control: Mazatrol 640M Interfaces: RS232, LAN, floppy disk drive Dimensions & Weight: Dimensions (L x W x H): 4,435 x 3,300 x 3,442 mm Machine weight: 12,000 kg Included: Various tools + Renishaw probe Documentation/manual Chip conveyor Partition for pendulum machining Electronic handwheel EIA / ISO programming Synchronous tapping Through-spindle coolant 5 bar A complete, very good machine, immediately available!

Condition: ready for operation (used), Year of construction: 2006, operating hours: 7,647 h, travel distance X-axis: 2,300 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, overall weight: 18,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 26,500 W, tool weight: 10,000 g, number of axes: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006, featuring a robust vertical machining center design. It boasts a large travel range of 2300/800/850 mm and a high spindle speed up to 12,000 rpm. The machine includes a B-axis NC swivel head, a 40-position tool magazine, and supports a maximum workpiece weight of 2500 kg. Consider the opportunity to buy this HEDELIUS T8 - 2300 vertical machining center. Contact us for more information. • NC swivel head B-axis: +92° / -92° • Max pendulum operation: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5000 N, Z 9000 N • Spindle: • Max torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (pull-in force): 12 kN • Tool magazine/changing: • Tool positions (standard): 40 • Tool positions (Magnum): 80 • Max tool diameter: 125 mm (180 mm with adjacent positions empty) • Max tool length: 330 mm • Tool change time (approx.): 3.5 s • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z travel vertical (L2): 850 mm • Spindle nose to swivel axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z travel horizontal (L5): 1000 mm • Spindle axis to table surface (L6): 210 mm • Y travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Dusdpfx Afjyfiapepjn Additional equipment • Chip conveyor • Internal coolant through spindle, 40 bar • Paper belt filter • Oil and emulsion mist separator • Rotating viewing windows (2) • Cleaning guns (2) • Renishaw touch probe Technical Specification Taper Size SK 40

Condition: good (used), Year of construction: 2008, travel distance X-axis: 2,360 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, For sale is a 6-axis machining center from AXA, model VHC 2-2360-XTS / 50. The machine is in good condition and fully operational. Of particular note, each of the two NC tables allows fixture diameters of up to Ø1,100 mm—see drawing. Technical Data: Year of manufacture: 2008 Control: Heidenhain iTNC 530 Operating hours: Spindle hours: Travel X-axis: 2,360 mm Travel Y-axis: 600 mm Travel Z-axis: 800 mm Spindle taper: SK 50 Spindle power: 56 kW Torque: 355 Nm Tool changer: 52 stations (2 chains) NC Rotary Tables (2 units) Type: SKH-NC 7/T Table diameter: Ø 630 mm Max load: 750 kg Clamping: Hydraulic Dimensions: 5,650 mm x 3,700 mm x 3,200 mm Weight: approx. 22,000 kg Equipment: ICS 50 bar high-pressure pump, belt filter, Heidenhain RCN 729 measuring system, 3D probe Renishaw OMP 60, electronic handwheel, 2x Visiport (viewing window), chip conveyor. Dodpoyfhrdjfx Afpjun Tool holders are not included in the offer, but can be supplied at additional cost. Transport and loading can be organized Europe-wide upon request and for an extra fee. Prices are net plus VAT. Inspection possible by appointment. Please contact us—our team will be glad to assist you. Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For additional information or contact options, visit our website.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,790 h, functionality: fully functional, travel distance X-axis: 2,032 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, table load: 3,000 kg, spindle speed (max.): 6,000 rpm, TECHNICAL DETAILS Travel X-axis: 2,032 mm Travel Y-axis: 750 mm Travel Z-axis: 750 mm Max. workpiece height: 870 mm Max. table/workpiece load: 3,000 kg Table width: 800 mm Table length: 2,240 mm Spindle speed: 40 – 6,000 rpm Spindle taper: SK 50 Standard spindle power: 18.5 kW Standard torque: 759 Nm Spindle power (optional): 26 kW Torque (optional): 1,067 Nm Duodpfx Afsyfhdyopsn MACHINE DETAILS Control unit: MAZATROL Dimensions & Weight Dimensions (L x W x H): 5,685 mm x 4,096 mm Weight: 14,000 kg Operating hours: 32,790 h

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 550 mm, controller model: Siemens 840D solution line, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Travel X-axis: 3,000 mm Travel Y-axis: 630 mm Djdpfx Asyfgf Nofpeun Travel Z-axis: 550 mm Rapid traverse speed: 60 m/min Spindle speed: 12,000 rpm Clamping area: 3,600 x 710 mm T-slots: 5 Number of axes: 3 Tool magazine: 40 positions Traverse path in pendulum mode per work area: 1,250 mm MACHINE DETAILS Control: Siemens 840D solution line Machine weight: 9,600 kg EQUIPMENT 24-position tool magazine Coolant system 900 l High-pressure system 30 bar Internal coolant supply tools Chip conveyor Hydraulic unit 200 bar 6 hydraulic connections for 200 bar 2 connector couplings A+B (3 per table side) Variable Chiron clamping logic Prosin Plus tool breakage monitoring for diameters > 3 mm Automatically opening and closing loading door Machine preparation for 1 x NC axis

Condition: good (used), Year of construction: 2007, Pinnacle QV 209 Year of manufacture: 2007 Control: Heidenhain iTNC 530 Table dimensions: 2200 x 850 mm Table height (from floor): 920 mm Max. workpiece weight: 3,000 kg Spindle taper: MAS BT-40 Tool changer double gripper: 40 positions Max. tool weight: 15 kg Tool change time: 3 sec. Chip-to-chip time: 8 sec. X: 2,000 mm Y: 900 mm Z: 850 mm Number of T-slots: 5 Dodpsyfc N Rsfx Afpoun T-slot spacing: 150 mm T-slot width: 18 mm Central T-slot: 18H7 Spindle motor: INTRAMAT QAN 260L Speed range: 40 to 8,000 rpm Low gear range: 40–1,700 rpm High gear range: 1,701–8,000 rpm Torque: approx. 650 Nm Repeatability: +/- 0.005 mm

Condition: new, For sale is a spindle cover suitable for a Mazak VTC 30C. The cover is new and has never been installed. Djdsydvi Uspfx Afpjun

Condition: used, Year of construction: 2007, travel distance X-axis: 1,740 mm, travel distance Y-axis: 760 mm, travel distance Z-axis: 660 mm, controller manufacturer: Mazatrol, controller model: PC Fusion 640 M, total height: 3,100 mm, total length: 5,200 mm, total width: 3,460 mm, table width: 2,000 mm, table height: 760 mm, table load: 1,400 kg, overall weight: 12,000 kg, spindle speed (min.): 40 rpm, spindle speed (max.): 12,000 rpm, CNC Control Mazatrol PC Fusion 640 M Dusdjyddlwspfx Afpen Table size 2000 x 760 mm Table load 1400 kg Number of pallets: 1 x Movement X-axis 1740 mm Movement Y-axis 760 mm Movement Z-axis 660 mm 4th Axis (Rotary table) Kitagawa MR 250 Spindle taper CAT 40 Spindle speed 12.000 1/min Spindle motor 11/7,5 kW Magazin capacity 48 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Year of construction: 2015, Mazak VTC 800 SR, year of manufacture 2015, Mazak Mazatrol Matrix 2 control, travel X/Y/Z 3000/800/720 mm, CNC rotary table Nicken 601 MA Ø 600 mm, 48-position tool changer, SK 40 taper, high-pressure coolant IKZ 70 bar, partition wall, 3D probe, CAD/CAM software Topsolid 7.18, table size 3,500 x 820 mm, rapid traverse X/Y/Z: 50 m/min, postprocessor. Dsdpfsydcz Rjx Afpsun

Condition: used, Year of construction: 2001, Technical details: x-travel: 2030 mm y-travel: 810 mm z-travel: 810 mm control: SELCA S3045PD turning speeds: 6.000 1/min tool change unit: 16 tool taper: SK 50 table-size: 2200 x 780 mm table load capacity: 2010 kg rapid traverse: 20 m/min spindle drive: 20 / 17 kW weight of the machine ca.: 11;6 t space requirements approx. LxWxH: 6,2 x 3,2 x 3 m vertical machining center, chipconveyor (backside), flat track guideways, internal coolant device, direct measuring system, HF-spindle 27.000 1/min, exchangeable, 3D touchprobe RENISHAW MP 12, no hour meter Dsdpfx Ajych T Asfpoun *

Condition: used, Year of construction: 1998, Technical details: x-travel: 3000 mm y-travel: 600 mm z-travel: 800 mm table surface area: 3.600 x 650 mm max. table load: 2.800 kg control: TNC 426 HEIDENHAIN turning speeds: 6.000 1/min tool change unit: 30 Pos. taper ISO: SK 50 rapid motion - x-axis: 30 m/min rapid motion - y-axis: 30 m/min rapid traverse Z-axis: 30 m/min spindle drive: 31 / 21,5 kW total power requirement: 45 kW dimensions of the machine ca.: 5,5 x 3,4 x 3 m weight of the machine ca.: 15,5 t 3-axis vertical machining-center, prepared for 4th axis (wire and plug), internal cooling device 40 bar, chip conveyor, el. handwheel HR 410, 3D-touch probe, direct measuring system, dividing wall, twin table machining, flush gun, table elevation 100mm, bed flushing, coolant of spindle (oil), approx. 53.000 switch on hours, 18.500 spindle hours Dusdpfxsychids Afpjn *

Condition: excellent (used), Year of construction: 2001, Heidenhain TNC 426 control Travel X/Y/Z: 1760/600/600 mm Left table dimensions: 1,350 x 600 mm Duodpfoycc Nfex Afpon Right table dimensions: 1,000 x 600 mm Spindle speed: 8,000 rpm Tool magazine for 36 tools SK40 4th axis 3D probe

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 900 mm, number of axes: 5, This 5-axis FAMU ACTIVE FIVE 3000 was manufactured in 2010. It features extensive travels of 3000 × 1200 × 900. Notably, the electrospindle and Z axis components were replaced in March 2025, and the X axis components in 2024, ensuring enhanced reliability and performance. If you are looking to get high-quality milling capabilities consider the FAMU ACTIVE FIVE 3000 machine we have for sale. Contact us for more information about this machine. • Service/Upgrades: • March 2025: Electrospindle replaced; Z-axis ballscrew, guides, and linear blocks replaced • 2024: X-axis ballscrew, guides, and linear blocks replaced Duedpfxsyca I Eo Afpjn

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 2,135 mm, travel distance Y-axis: 865 mm, travel distance Z-axis: 762 mm, table load: 2,300 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 30,000 W, number of slots in tool magazine: 90, number of axes: 3, This 3-axis Hurco VMX 84i was manufactured in 2018, featuring a large table area of 2185 x 865 mm and a robust table load capacity of 2.3 tons. It boasts a spindle speed of up to 12,000 rpm and a high-capacity tool magazine with 90 slots. Ideal for demanding machining tasks, consider the opportunity to buy this Hurco VMX 84i vertical machining centre. Contact us for more information. • Table area: 2185 x 865 mm Dujdpfx Afjyb A R Hepjn Technical Specification Taper Size ISO 40