SZ Lasertechnik GmbH & Co. KG

Condition: used, Year of construction: 1999, machine/vehicle number: 71.28, travel distance X-axis: 1,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 15,000 rpm, spindle speed (max.): 15,000 rpm, distance table to spindle center: 750 mm, CNC machining center Nksdpfx Aheyxmiis Rsw

Condition: not inspected (used), Year of construction: 2016, operating hours: 21,228 h, machine/vehicle number: 127300000073, travel distance X-axis: 2,100 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,250 mm, overall weight: 46,000 kg, spindle speed (min.): 12,000 rpm, spindle speed (max.): 12,000 rpm, coolant supply: 80 bar, 5-axis CNC universal machining center with controlled B-axis and NC rotary table (C-axis). Large working area approx. 2,100 x 2,100 x 1,250 mm. Njdpfjyxmicex Ah Rokw Equipped with a powerful SK50 spindle (52 kW, 430 Nm, up to 12,000 rpm) and internal coolant supply up to 80 bar. Tool changer with 60/63 positions (chain/wheel magazine, double gripper). Very well equipped with Blum Laser, 3D quickSET, ACC, and MPC. Including chip conveyor, oil mist separator, and coolant system. Control ON: 47,888 h – Operating hours: 21,228 h

Condition: used, Year of construction: 2007, machine/vehicle number: 84.62, CNC machining center Nkedpfx Ajyxmhrjh Rsw

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 11790001067, travel distance X-axis: 200 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 280 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, nominal power (apparent): 40 kVA, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, total height: 2,600 mm, total length: 4,000 mm, total width: 3,000 mm, overall weight: 6,000 kg, spindle speed (max.): 42,000 rpm, number of slots in tool magazine: 24, tool diameter: 40 mm, DMG SAUER ULTRASONIC HSC LINEAR 20 HSC Machining Center - Operating voltage: 400 V - Frequency: 50/60 Hz - Rated current: 100 A - Connection: 40 kVA - Input unit X/Y/Z axis: 0.001 mm - Travel measuring system resolution X/Y/Z axis: 0.001 mm - Position tolerance in X/Y/Z axis with direct measuring system: 0.005 mm - Tool holder: HSK-32 E - Max. tool length from spindle nose: 200 mm Nkodpfx Ahjyxckve Row - Max. tool weight for automatic tool change: 1 kg, total tool weight in magazine: 24 kg - NC rotary table with swivel axis - C-axis clamping surface: 190 mm diameter - Swivel range: 360° - Rotary table speed: 150 rpm - A-axis swivel range: -5/+130° - Loading capacity: max. 10 kg - Including the tool holders shown in the photos in the tool magazine - Also includes an additional external tool changer system (30-position) from manufacturer ROBOWORKER, type: LM 100 Note: The machine can be transported on a standard truck! Note: This item is available immediately! FCA D-73235 Weilheim Teck – loaded onto truck

Condition: used, Year of construction: 2019, x-travel 500 mm y-travel 450 mm z-travel 400 mm control SlimLine Siemens turning speed range - main spindle max. 12.000 min/-1 power capacity - main spindel 13 / 9 kW max. Torque 83 / 57 Nm tool taper SK 40 table surface area 630 x 500 mm max. table load 200 kg Swivel range B: -5 / +110 ° rotation range C: 360 ° T-slots 7x 14 x 63 mm number of toolpositions 30 pos. max. tool weight 8,0 kg max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. workpiece length 300 mm change-time tool to tool 2,7 sec change-time chip to chip 7,0 sec rapid traverse X/Y/Z: 30 m/min Feed force 4,5 kN feed speeds 1 - 30.000 mm/min total power requirement 30 kVA Nedpfx Ahoyw Tite Rokw weight of the machine ca. 4,7 t dimensions of the machine ca. 4,5 x 3,5 x 3,2 m CNC - Milling Machine Universal DMG MORI - CMX 50 U - 5 Axis - swivable rotary table - Spindle-hrs.: only ca. 2264h - Power On Hours: ca. 6706h - incl. div. cutting inserts, milling cutters, mounting aids

Condition: good (used), Year of construction: 2017, functionality: unexamined, travel distance X-axis: 6,000 mm, travel distance Y-axis: 4,500 mm, travel distance Z-axis: 1,500 mm, total height: 9,000 mm, total length: 14,000 mm, total width: 8,000 mm, table width: 3,000 mm, table length: 5,000 mm, table load: 30,000 kg, overall weight: 90,000 kg, spindle speed (min.): 12,000 rpm, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 5-axis CNC gantry milling machine DMG MORI DMU 600 G linear (year of manufacture 2017) with linear drives in the main axes for highest dynamics and precision. Large working area with clamping surface approx. 5,000 x 3,000 mm and travel distances up to 6,000 x 4,500 x 1,500 mm (X/Y/Z), suitable for workpieces up to approx. 30,000 kg. Equipped with 2 interchangeable heads: Vertical milling head (up to 6,000 rpm) Njdpfx Ahoyw Nk He Rskw Swivel head with controlled B-axis ±185° (up to 12,000 rpm) as well as C-axis 360° direct drive for complete 5-axis machining. High-performance motor spindle up to 74 kW / 2,024 Nm, tool magazine with 60 positions. Comprehensive equipment including: Blum laser, touch probe, 3D quickSET, ACC, MPC, thermal compensation (TTC), camera system, chip conveyor. Operating data: Control ON: approx. 46,100 h Operating hours: approx. 21,700 h

Condition: good (used), Year of construction: 2012, Parts shown by hand not come. Nodpeyw Nauofx Ah Rskw Technical details are shown on picture.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, We offer you the following: Manufacturer: DMG Mori Model: CMX 50 U Year of manufacture: 2019 Control unit: Slimline Siemens Operate Travel distances: X-axis: 500 mm Y-axis: 450 mm Z-axis: 400 mm B-axis: -5 to +110 ° C-axis: 360 ° Main spindle: Tool holder: SK 40 Spindle speed range: 20 - 12,000 rpm Main spindle drive power (100/40%): 13 / 9 kW Working table: Table size: D 630 x 500 mm Tool changer: Number of tool pockets: 30 positions Rapid traverse rates: Rapid traverse (X/Y/Z): 30 m/min Operating hours: approx. 7,070 h Spindle hours: approx. 2,800 h Technical features & accessories: - Direct linear measuring system in x, y, and z axes, including air purge - Air blow switching via M function - Production package, consisting of: - Internal coolant supply 12 bar - Chip conveyor, 250 l tank - Bed flushing via M function - Coolant spray gun Nkodpfx Aheywlkcj Rjw - Machine enclosure roof - 4-color signal lamp - Renishaw measuring kit, consisting of: - Touch probe PP40 - Tool measurement TS27R - Tool breakage monitoring - Calibration tool - Preparation for 3DquickSET Accessories, tools, and clamping devices shown are only included in the scope of delivery if specified in the additional information. Technical data and specifications are subject to change and errors. Prior sale reserved!

Condition: like new (used), Year of construction: 1993, functionality: fully functional, Very nice Deckel Maho FP1 From the latest model! Comes from a toolmaking workshop. UNIQUE MACHINE With feed on the Y-axis. Nkjdoywlakjpfx Ah Rew

Condition: used, Year of construction: 2020, Two machines from year of manufacture 2020 (G5 i) and one machine from 2022 (G5) available. Includes hydraulic unit, oil cooler, and air dryer Initial commissioning of the 2020 machines in March/May 2022, the 2022 machine in March 2023. The machining center can be used for grinding, milling, and drilling of metallic workpieces. A standard integrated dressing unit is included. This machining center is used for hard grinding and finish boring of holes in discs and flanges of precision planetary gear units. Machine Description: Makino Model G5 i Grinder Universal Machining Center With creep feed grinding function Makino Professional 5 Control System Machine Specifications (according to manufacturer): Travel: Column X-axis: 520 mm Spindle Y-axis: 560 mm Table Z-axis: 600 mm Spindle center to top of pallet: 80 – 640 mm Spindle nose to center of pallet: 70 – 670 mm Feed rates: Smallest increment: 0.001 mm Jog operation: 1 - 8,000 mm/min Machining feed: 1 - 48,000 mm/min Rapid traverse: 48 m/min Spindle: Spindle taper: ISO 40 Spindle motor (high torque): 18.5 / 22 kW AC Speed (2 ranges): 50 – 12,000 rpm Automatic tool changer Machine weight: 8,450 kg Controlled Axes: 5-axis simultaneous Special equipment for VIPER grinding: Dressing unit Rotary dressing unit (quick-change) – electric, incl. holder (52 mm) Electrical interface for dresser Workpiece clamping: Erowa ER-029392 Power Chuck Clamping/release control including pressure display Coolant preparation and supply: Water-based coolant filtration system Transfer tank High-pressure pump Self-tilting chip bin Coolant supply bridge Njdpfx Ahoywgh Ns Rokw Extraction unit including ductwork Makino interface for coolant system Makino interface for extraction system Coolant monitoring (pressure, flow, temperature) Programmable coolant nozzle (PCN) – through spindle, nozzle, base, and shower PCN nozzle assembly Other: Automatic workpiece measuring device (RMP600) Point Master unit (manual measuring probe) Bench Master Air dryer Special I/O interface Machine anchoring set FANUC warranty (2 years) C&F costs UK/Euro transformer High-speed rotary work spindle (100 rpm) Time-delayed splash guard Oil lubrication system for ballscrews and linear guides Programmable coolant nozzle for grinding wheels (PCN) Reinforced splash guard door Automatic front door (AWC) with light curtain Signal lights (3-color) Halogen work lamp (1 pc) Safety interlock package Optional equipment: Easy-Grind Max NC incl. HMI and Machine Manager Scale system X, Y, Z axes (0.05 μm) Switching the display language from English to German Freewheel function of rotary axes during operation Project management by NCMT and Melior Motion Easy-Grind Max+ (single station solution, custom configured)

Condition: ready for operation (used), Year of construction: 1999, CNC Control: '3D Heidenhain Millplus 5 axes Travel path X-axis (mm): 1250 Travel path Y-axis (mm): 880 Travel path Z-axis (mm): 800 C-axis indexing degrees: 360º (0.001) Feed rate (m/min): 40 Rapid traverse (m/min): 40 Nodpfx Ahoywfk Aj Rokw Max. spindle speed (rpm): 15,000 Spindle drive power (kW): 15/10 (40% duty cycle / continuous) Cooling Tank capacity (litres): 600 Tool system Tool holder: CAT 40 Number of tools in magazine: 60 Tool changer type: Double gripper Equipment Electronic handwheel Chip conveyor Internal coolant supply Rotating safety windows Rinse gun RENISHAW Accuracy package Internal cooling 40 bar Paper band filter Machine run time: Power-on hours: 70,059 Spindle operating hours: 27,255 Total power requirement (kVA): 55 Weight: 12,500 kg Length (mm): 7,000 Width (mm): 3,500 Height (mm): 3,902

Condition: good (used), Year of construction: 2013, 1 used 5-axis (3+2) universal machining center Make: DMG Mori Model: DMU 50 Year of manufacture: 2013 Technical specifications: X-travel: 500 mm y-travel: 450 mm z-travel: 400 mm C-axis: 360° B-axis (table -50 / +110° mm Spindle speed: 10,000 rpm Spindle mount: ISO 40 DIN 69871 Control: Heidenhain TNC 620 Total power requirement: 13 / 9 kW Machine weight: approx. 4.5 t Space requirement: approx. 6 x 3 x 3 m Additional information Options: - 30-slot magazine with double gripper - Production package with high-pressure coolant and scraper-belt conveyor - 360 L coolant tank - Air blast - Coolant pistol - Electronic handwheel - HEIDENHAIN TS 649 infrared touch probe - Direct measuring system Nsdpfx Ahjywfc Ss Rokw New motor spindle in 2022 ATTENTION: The machine is sold without the clamping system shown in the photos!!

Condition: excellent (used), Year of construction: 2011, operating hours: 11,000 h, CNC controller: HEIDENHAIN iTNC530 X-axis travel mm: 450 Y-axis travel mm: 580 Z-axis travel mm: 400 C-axis degrees: 360° (0,001°) A-axis degrees: +10° -110° Njdpfx Ahjyv H I He Rjkw Worktable Table dimensions mm: 400x400 Max. workpiece weight kg: 200 Spindle speed rpm: 42.000 Tool holder: HSK-E50 Tool magazine slots: 60 Electronic Handwheel Infrared probe blowing air through spindle center selectable via M-function Signal lamp NC swivel rotary table 3D quickSET 20-position pallet tower storage and transfer station

Condition: new, Year of construction: 2026, Z-MaT U320 5-Axis Simultaneous Machining Center Control: ZMATROL 5-Axis Simultaneous, 15" LCD screen (optionally Siemens ONE, 15" LCD screen) (Siemens/Fanuc 4+1) Travel (X/Y/Z): 500/500/400 mm Rapid traverse (X/Y/Z): 48/48/48 m/min Cutting feed: 1-10,000 mm/min Spindle Spindle speed: 24,000 rpm, built-in Spindle taper: BT30 Spindle motor: 3.7/5.5 kW Air blast through spindle Spindle air curtain Spindle oil cooler Tool changer: 21-tool disc Max. tool length: 200 mm Max. tool diameter: 60/100 mm Table Table diameter: Ø 320 mm Max. workpiece diameter: 320 mm Max. table load: 80 kg T-slot (width x quantity x spacing): 14H8 x 8 x 45° Distance spindle center to table surface: 100–500 mm A-axis tilting travel: ±115° C-axis rotation: 360° Max. rapid traverse A/C-axes: 100/130 rpm A/C-axis encoders Standard accessories Work completion lamp, 3-color status light Electronic handwheel (MPG) Work area lighting Roller linear guides Automatic grease lubrication system 3-axis glass scales with air purge (XYZ) Automatic tool changer Air gun Coolant gun Coolant tank Coolant flushing system (chip wash) Nsdpfjyv A Trex Ah Rokw Full enclosure Transformer: 400V, 50Hz Electrical cabinet heat exchanger Automatic power-off Leveling bolts and blocks Toolbox CE conformity Hinged belt chip conveyor Machine size and weight Machine dimensions (L x W x H): 1800 x 3270 x 2510 mm Machine weight: approx. 4,300 kg Subject to errors and prior sale Extensive automation options available

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details x-travel 400 mm y-travel 580 mm z-travel 460 mm Control Heidenhain iTNC 530 Additional information HSC Precision Machining Center HSC 55 linear NEW DMG Design Heidenhain iTNC530 3D Control SmarT.NC User Interface DMG ERGOLine® Control, 19" Screen HSC 55 linear 5-Axis Version Rotary Swivel Table Clamping Surface 400 x 400 mm Swivel Range A-Axis +10/-110°; C-Axis 360° Maximum Load Capacity 200 kg, Absolute Measuring Systems Including Drive Cooling for A and C Axes X = 450 mm, Y = 580 mm, Z = 460 mm 80 m/min Rapid Traverse Spindle Speed ??20 – 42,000 rpm For HSK-E50 Tool Holder according to DIN 69893 AC Main Drive with 13/10 kW (40%/100% ED) Tool magazine with 60 positions Chain magazine with double gripper Active cooling unit for main spindle and linear drives Active cooling unit for control cabinet Direct absolute measuring systems including purge air Coolant/air cooling switch Renishaw laser tool measurement for measuring tool length and diameter incl. calibration mandrel with tool holder 3D quickSET Toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations (only in conjunction with optional probe) PP 60 optical infrared probe Electronic handwheel Application Tuning Cycle (ATC) software Selection of the optimal machining mode for the current operation 20-position pallet tower storage and transfer station Pallet size: UPC 320x320mm Loading door and air supply at the worktable Pallet management via machine control Including UPC-P chuck Nkjdeyv Ap Hopfx Ah Rsw Four-color indicator light Air blower through the spindle center, selectable via M-function and softkey Maintained air with low oil content Dust extraction for graphite Rotating viewing window Operating mode 4 Process monitoring in production Laminated safety glass window

Condition: used, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 350 mm, total height: 1,800 mm, total length: 1,700 mm, total width: 1,300 mm, table width: 380 mm, table height: 285 mm, table length: 625 mm, rotational speed (min.): 40 rpm, rotational speed (max.): 2,000 rpm, overall weight: 1,700 kg, spindle speed (min.): 40 rpm, spindle motor power: 5,000 W, number of spindles: 1, input voltage: 380 V, type of input current: three-phase, The MAHO MH80 is a robust conventional universal milling machine suitable for use in toolmaking, mechanical engineering, as well as for single-part production and training purposes. Nodpfx Aeyvhbzsh Rokw The machine is equipped with a swiveling vertical milling head and can also operate in horizontal milling mode, making it versatile for various machining tasks. Its sturdy cast construction ensures high precision and reliability even after many years of operation. The listed price does not include dismantling, packaging, and shipping costs. Sale is ex location, subject to prior sale. The machines are sold in used condition; any warranty or guarantee is excluded.

Condition: ready for operation (used), Year of construction: 1998, operating hours: 15,968 h, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 300 mm, controller model: FANUC 16iM-16i, rotational speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 380 mm Travel Z-axis: 300 mm Max. spindle speed: 8,000 rpm Table surface dimensions: 650 x 380 mm Number of tool magazine slots: 14 Tool holder: ISO/BT 30 Rapid traverse: 48 m/min MACHINE DETAILS Control model: FANUC 16iM-16i Power-on hours: 94,768 h Cutting hours: 15,968 h Operating hours: 5,146 h Spindle power: 5.5 kW EQUIPMENT Chip container Coolant tank with pump Nksdpfx Ahoyvf Hgs Rew Integrated liquid lubrication system

Condition: good (used), Year of construction: 2004, Machine is good working condition. Njdpfsyufn Iox Ah Rskw Control unit Heidenhain TNC 530 Parts shown by hand not come.

Condition: not inspected (used), Year of construction: 1986, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, overall weight: 6,000 kg, Heidenhain TNC 426 Nkedpfx Asyt Nxush Row 900x700 mm universal table Travel: 850x700x600 mm Max spindle speed: 6000 rpm Weight: 6000 kg

Condition: used, Year of construction: 2008, operating hours: 6,848 h, functionality: fully functional, machine/vehicle number: 11580008023, travel distance X-axis: 730 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain iTNC 530, total height: 2,260 mm, total length: 22,950 mm, total width: 2,100 mm, table width: 600 mm, table length: 1,000 mm, table load: 200 kg, rotary table diameter: 600 mm, rotational speed (min.): 1 rpm, rotational speed (max.): 3,000 rpm, overall weight: 6,000 kg, spindle speed (min.): 1 rpm, spindle speed (max.): 12,000 rpm, spindle motor power: 15,000 W, number of spindles: 1, number of slots in tool magazine: 24, tool length: 315 mm, tool diameter: 130 mm, tool weight: 8,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, The Deckel Maho DMU 60 is a universal 5-axis CNC machining center designed for precise milling and complete machining of complex components. This machine is part of the renowned DMU series by DMG Mori (formerly Deckel Maho) and is widely used in toolmaking, mechanical engineering, mold making, as well as the aerospace industry. Thanks to the swiveling milling head (B-axis) and NC rotary table (C-axis), workpieces can be machined on five axes, enabling the production of complex geometries in a single setup. Nksdpfjyt Ibnjx Ah Rjw Previous application conditions: General machine/tool parts in steel, aluminum, cast iron, etc. Heidenhain iTNC 530 control HSK-A 63 tool holder The stated price is exclusive of dismantling, packaging, and shipping. Sale is from location, subject to prior sale. The machines are sold in used condition; any warranty and guarantee are excluded.

Condition: like new (used), Year of construction: 2021, operating hours: 1 h, functionality: fully functional, Equipment: chip conveyor, rotational speed infinitely variable, Lathe and milling machine, as new, barely used, delivery in Ankara. Nedsytrblopfx Ah Rjkw

Condition: good (used), Year of construction: 2004, functionality: fully functional, Universal machining centre Deckel Maho DMU 50 M with Heidenhain TNC 310 CNC control. Swivel-rotary table, SK 40 spindle taper with hydraulic drawbar. In good working condition, can be inspected under power. Nksdpeytpy Ejfx Ah Rsw

Condition: used, Year of construction: 2007, x-travel 500 mm y-travel 420 mm z-travel 380 mm Control Heidenhain TNC 530 max. turning speeds 20-18000 min/-1 tool taper SK 30 table surface area 800 x 480 mm max. table load 500 kg number of tool places 32 Pos. max. tool length 280 mm max. tool weight 6 kg rapid traverse 50 m/min feed speeds 20 m/min weight of the machine ca. 5700 kg dimensions of the machine ca. 6,6 x 5,4 x 3 m total power requirement 45 kW Number of working hours 24.437 h spindle hours 9.874 h Number of axles 5 St. 5-axis Milling Center Deckel Maho DMG 50 eVo linear, built 2007 Nsdoytha Djpfx Ah Rjkw Attachment: 10 off SK30 tool holder Note: The control system occasionally switches to EMERGENCY STOP due to a hydraulic fault. This is probably due to the control system and not the hydraulic unit or hoses, as there are no leaks. The supplier expects that a minor repair will suffice.

Condition: used, Year of construction: 2000, Deckel Maho DMU 50 eVolution 5-Axis Universal Milling Machine Condition: Used Year of manufacture: 2000 Technical Data Travel: X/Y/Z 500 mm / 420 mm / 380 mm Main spindle: Speed up to 18,000 rpm Power (40% duty cycle) approx. 15 kW to 35 kW (depending on spindle version) Tool holder: HSK-E 50 NC swiveling rotary table: Clamping surface Ø 500 x 380 mm Swivel range (B axis) 0° to 180° Rotary range (C axis) 360° Max. table load: 200 kg Tool changer: 60 stations Feed rate: up to 20,000 mm/min Rapid traverse (X/Y/Z): up to 50 m/min Equipment Control: Heidenhain Nkodpfx Ahjyr Safj Rew Measuring systems: Direct position measuring systems in all axes Accessories: Chip conveyor, internal coolant supply Weight: approx. 5,500 kg to 6,000 kg Installation area with peripherals: approx. 5.4 x 4.7 m

Condition: excellent (used), Year of construction: 2012, operating hours: 4,961 h, functionality: fully functional, travel distance X-axis: 120 mm, travel distance Y-axis: 120 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 10 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 10 m/min, overall weight: 1,800 kg, spindle speed (max.): 40,000 rpm, operating hours of spindle: 4,961 h, spindle nose: HSK-E32, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, Including plenty of tool holders and clamping fixtures for dental manufacturing Nsdpfx Ahsyr Difo Rekw