Kruszywa Niemce

Year of construction: 1993, condition: used, functionality: fully functional, OMIPA CO-EXTRUDER CAST LINE 5 LAYERS Complete line for the production of 5 layers cast film Material PET-C, PET-PP Material width 1550 mm Material thickness 0,2 / 0,8 mm Output max. 650 kg/h Nº4 Extruders with screw diameter 120mm / 90mm / 60mm / 45mm Co-extrusion block 5 layers: BA, BAAAB, ACDCB Flat extrusion die-head Nº5 Rolls calender with diameter 412 mm and width 1800 mm Bljdpfx Aeypkfbjgkod Cristallyzer GC/1200 L Dehumidifier SMC 1200 Gravimetric dosing system Edge trim cuttin system Year 1993

Year of construction: 2008, condition: used, Lot consists of: (1) Twin-screw extruder Technical details: screw diameter: 75 mm, capacity: max 200 kg/h, KraussMaffei-Berstorff control, weight: 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight: 1.2 t (1) Calibration table Technical details: table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Bljdpfjyknrzox Agkjd Technical details: contact length approx. 2.5 m, unit length approx. 8 m (1) Tipping table Technical details: length approx. 6,000 mm

Year of construction: 2012, condition: used, Lot consists of: (1) Twin-Screw Extruder Technical Details: screw diameter 75 mm, Capacity: max 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration Table Technical Details: with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-Off Unit Bodpfx Aoyknp Togkjld Technical Details: speed 0.1 - 11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Tipping Table Technical Details: slide into adjacent profile, single-strand roller shutter, table length approx. 6,000 mm

Condition: used, machine/vehicle number: 421, input voltage: 230 V, type of input current: three-phase, input frequency: 50 Hz, We offer this used FMC 4028 transparent box machine, year of manufacture not specified. Model: 4028 Serial number: 421 Voltage: 230 V Phase: 1 Frequency: 50 Hz Current: 4.2 A Patent No.: 3259030 • Serial no. 421 • Size range: BOX: (dependent on blank size) Min. 76 x 25 x 10 mm Max. 405 x 280 x 12.7 mm or 405 x 203 x 76 mm • BLANK: Min. 95 x 45 mm Max. 558 x 355 mm Material thickness: 0.12 to 0.25 mm Bedpfx Ageyizg Nsksld • Complete with Perondi 2T-700 corner cutter If you have any questions or require further information, please feel free to send us a message or call us.

Condition: ready for operation (used), functionality: fully functional, Fully equipped plastic processing line, including: - Main extruder: BA92 NOVEL - Co-extruder: ROYAL MACHINE, model 253-070-000, mounted on a support column. The line consists of several components. - Suitable for co-extrusion applications – e.g., multi-layer profiles, strips, technical components TECHNICAL DATA – BA92 Extruder (NOVEL) - Screw: Ø92 mm, length 24 L/D - Type: B60S4; VB92-24-005 - Speed range: 3.3 ÷ 33 rpm - Barrel: 34CrAlNi7 steel, hardness 1000 HV - Gearbox: ratio 1:63.4 R - Thrust bearing: 1,170,000 N - Heating zones: 6 - Cooling zones: 4 - Motor: 63.8 kW, DC, 210–2100 rpm Bjdpfx Ageyc R U Ajksld - Venting: 2.2 kW pump, 36 m³/h, vacuum 700 Hg - Feeder: 1.2 kW DC motor TECHNICAL DATA – ROYAL MACHINE Co-extruder - Screw: Ø1¾", length 21D, compression ratio 2:1, twin-flighted - Barrel material: AISI 4140 steel (bimetallic barrel 2” O.D. x 1¼” I.D.) - Gearbox: ROSSI RCI 80 U03A, ratio 1:16.4 + belt 1:1.65 (total ratio 1:27) - Drive belt: type 3VX560, 3 pcs. - Thrust bearing: load capacity 20,000 kg - Heating: 6.9 kW, 3+1 heaters - Cooling: 1/16 HP, 3 fans - Motor: POWERTEC Frame 184 TC, 5 HP, 0–1750 rpm Condition: complete, fully operational line, ready for operation Application: plastic processing in co-extrusion processes Technical documentation available upon request. Includes additional spare parts.

Year of construction: 2004, condition: ready for operation (used), functionality: fully functional, Each line comprises: • Main extruder: BA105 AMUT, year of manufacture 2004 • Single-screw co-extruder: ROYAL EUROPA (Canada), year of manufacture 2005 • Pneumatic raw material conveying system • Cooling table with tank (AMUT NERG10, 10 m), year 2004 • Puller-saw (TP25, 7 m), year 2004 • Run-out table _____ TECHNICAL DATA – BA105 AMUT Extruder • Screw: Ø105 mm, length 24 L/D • Type: PCD90WEF; VBM105-24-007 • Speed range: 2.66 ÷ 26.6 • Screw material: alloy steel 41CrAlMo7, hardness 1000 HV • Gearbox: ratio 1:65.6 R • Thrust bearing: 1,400,000 N • Barrel heaters: 42.92 kW (7 heating zones, 4 cooling zones) • Main motor: 60 kW, 1750 rpm • Degassing: pump 2.2 kW, 30 m³/h, vacuum 700 Hg _____ TECHNICAL DATA – ROYAL EUROPA Co-extruder • Type: 253-100-000, column-mounted Bledpfx Agoyc R Aasksd • Screw: Ø1¾", length 21D, compression ratio 2:1, double-flight • Screw and barrel material: AISI 4140 steel • Bimetallic barrel: Ø3" O.D. / Ø1¾" I.D. • Screw hardness: 50–52 RC Gearbox: • Type: ROSSI RCI 100 U03A • Ratio: 1:15.2 + belt 1:1.65 (overall 1:25) • Belt type: 3VX600 (4 pcs) Heating and cooling: • Heating power: 8.9 kW • Heaters: 4+1 • Cooling: 1/16 HP, 4 fans Motor: • POWERTEC Frame 215 TC • Power: 10 HP • Speed range: 0–1750 rpm Technical condition: Both lines complete and fully operational Ready for profile production using multilayer co-extrusion Possible to sell one or both lines – as per buyer’s requirements On-site presentation available. Documentation and photos available. It is possible to purchase a single line for €100,000.00.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, The line includes: - Main extruder: BA130 (Cobra), year of manufacture 2008 - Co-extruder: CM65, year of manufacture 2008, sold for parts - Embosser, cooling tank, nailer, puller, perforator, guillotine – all year of manufacture 1996 TECHNICAL DATA – BA130 Extruder (Cobra) - Main screw: Ø130 mm, length 26 L/D - Center distance: 1050 mm Bodpfx Aeyc Rtxegkeld - Screw material: XALOY 41CrAlMo7, hardness 1000 HV - Gearbox: 1:31:7 R - Thrust bearing: 2 020 000 N - Barrel heaters: 74.6 kW (7 heating zones, 6 cooling zones) - Main motor: 205 kW, 1460 rpm - Degassing: pump 4 kW, 100 m³/h, vacuum 700 Hg - Feeders: 2x motor 2.2 kW, ratio 1:25:4 R, screw speed 112 rpm Technical condition: The line is operational and ready for production The configuration allows for the complete siding production process – from granulate to finished profile Individual price quotation and on-site machine demonstration available.

Condition: used, Production line consisting of: (1) Conical twin-screw extruder Technical details: Screw diameter 43 mm, capacity: max. 150 kg/h, KraussMaffei-Berstorff control system, weight 2.3 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Equipped with three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed approx. 0.1 - 11 m/min, pulling force approx. 25,000 N, contact length approx. 1,500 mm, profile clearance approx. WxH 300 x 180 mm, with film application unit (1) Sawing unit Bledpfsx I I Ncjx Agkod Technical details: Upstroke, saw blade diameter 250–400 mm, profile clearance WxH 340 x 20 mm / diameter 115 mm, cycle max. 40 cuts/min (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off/saw combination Technical details: Weight approx. 1.8 t, with two (2) IDE chip extraction systems ME AS 58 (1) Tilting table Technical details: Bsdjx I I Iljpfx Agkeld Length approx. 6 m, weight approx. 300 kg

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 65 mm, weight 2.8 t /// Drive: Thyssen Henschel TPM 3-65-DOS-25, serial number 6333547/13, weight 710 kg (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit Technical details: Contact length approx. 1,500 mm (1) Film application unit Bledpfx Asx I Itbjgkod (1) Saw unit Technical details: Upward stroke, saw blade diameter 250–400 mm, profile gap WxH 340 x 20 mm / diameter 115 mm, sequence max. 40 cuts/min (1) Tilting table Technical details: Length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Bodpfsx I Inxjx Agksld Technical details: four (4) SPECK pump units, length approx. 6 m, weight 2.7 t (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Production line consisting of: (1) Twin-screw extruder Technical details: Bjdpfx Agsx I Ig Uekold Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control unit, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Length approx. 6,000 mm (1) Twin-screw extruder Technical details: Screw diameter 90 mm, max. capacity 300 kg/h, BMCsmart control panel, weight approx. 3 t /// Drive motor HENSCHEL T1MAX90 C-35L, serial number 43-220/5, weight approx. 1.5 t (1) Calibration table Technical details: Table length approx. 6 m (1) Haul-off unit + punching unit + guillotine unit Technical details: Contact length approx. 2.5 m, unit length approx. 8 m (1) Tilting table Technical details: Tilting of profiles, table length approx. 6,000 mm

Condition: used, Line consisting of: (1) Twin-screw extruder Technical details: Screw diameter 75 mm, capacity: max. 200 kg/h, KraussMaffei-Berstorff control system, weight 3.5 t /// Drive: SIEMENS 2860 / 30.5 rpm, 5,070 Nm, weight 1.2 t (1) Calibration table Bljdpfx Agox I Emfokjd Technical details: With three (3) SPECK pump systems, table length approx. 4 m (1) Haul-off unit Technical details: Speed 0.1–11 m/min, pulling force 25,000 N, contact length 1,500 mm, profile clearance WxH 300 x 180 mm (1) Punching device + guillotine unit Technical details: Punching force 1,800 N, design: C-frame, punching frequency 130 strokes/min, punching tool LxWxH 185x180x132 (1) Tilting table Technical details: For pushing a single-strand roller shutter into an adjacent profile, table length approx. 6,000 mm

Year of construction: 2021, condition: like new (used), Complete welding and polishing line in like-new condition Bjdpfxox Irtfj Agkjld

Year of construction: 2000, condition: used, functionality: fully functional, Polypropylene sheet processing / extrusion line for sheets up to 80 mm thickness x 1,200 mm width. No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1700 mm No. 01 CNC machine with 8 tools, Siemens controlled, table size 2520x1260 mm No. 01 CNC machine with 10 tools, Osai controlled, table size 4,000x1,800 mm Bjdpfxexwnb Is Agkold No. 01 PPH extruder for sheets width 1230 mm and integrated cutting unit No. 01 PPH mechanical/pneumatic welding machine for plates/frames No. 01 PPH pneumatic welding machine for frames No. 01 PPH hydraulic/pneumatic welding machine for handles No. 01 PPH hydraulic welding machine for sheets width 3,000 mm No. 02 forklifts, each 2,500 kg capacity No. 01 PPH shredder, 100 kg/h No. 03 portable PPH extruders No. 02 vacuum lifters, 150 kg each

Year of construction: 2005, condition: excellent (used), Vertical block mould machine: Kurtz mod. Ecomat Basic data: • Year of production: 2005 • Block dimensions (LxWxH): 1060x1320x5200 mm The set includes inlays (height reducers) for blocks: - 1060x1320x5130 mm - 1060x1320x4000 mm • Electrical power demand: 400V; 50Hz • Operation silo • Roll out conveyor • Block scale • Inkjet printer • Complete documentation We also have for sale other machines for EPS (expanded polystyrene) production, such as: •steam generator •steam accumulators with capacity Blodpfx Agoxq N Amekod •3x cutting lines •3x blockmolds •pre-expander It is also possible to purchase a complete production line (including installation, commissioning, and staff training).

Year of construction: 2017, condition: like new (used), Production line for manufacturing NESPRESSO coffee capsules Comprising the following components: Item 01) Injection molding tools for the capsule, Manufacturer: FOSTAG AG 1 pc. mold with 16 cavities 1 pc. mold with 32 cavities Item 02) Two-component injection molding machine, Manufacturer: ARBURG, Model: 720A3200-800, Year of manufacture: 2017 Bledpfxjw Nriuo Agkod The capsules are produced as free-falling parts.

Condition: excellent (used), Year of construction: 2013, Cutting line: ERLENBACH mod.ESA 5 (used for less than a month). Year of manufacture: 2013 Packing machine, model PPZA-1300/6 (used for less than a month). Year of manufacture: 2011 Bljdpfxev Hm A Tj Agkod - For blocks max. L x B x H: 5100 x 1260 x 1260 mm - Horizontal cut: max. 61 oscillating wires - Vertical cut: max. 11 wires - Cutting speed: 1,5 m/min. - Automatic wire setting - Waste grinding (bottom, top, side)

Condition: ready for operation (used), functionality: fully functional, operating hours: 9,743 h, Complete pipe extrusion line for Double wall corrugated pipes – 150mm to 350m Material Dryer and loader– M+H Equipment, Germany Duo Extruder combination – Battenfeld 90/75 – Type PEX-1-75-30B Germany Special die head – DWP 270 – UC500 From 90mm ID to 270mm OD Special die head – DWP 630 – UC500 From 160mm ID to 500mm OD Unicor - Germany Corrugator – UC 500/40 Made in Germany Extrusion die and set of forming blocks – 1 set for DWC pipe ID 150mm, 200mm, 250mm, 300mm & 350mm Unicore - Germany Bljdpfx Aevztb Sogkjd Cooling Spray Bath – UCSB 500 Machine No Unicore, Germany Planetary Saw – SICA, Model – TRK/D/SY 10-500 Tube Deposit Unit -500

Condition: ready for operation (used), Year of construction: 2001, Ø 710-1000mm range PVC pipe production line. Bjdsvzqy Sjpfx Agkeld

Condition: excellent (used), Year of construction: 2005, Vertical blockmold: KURTZ mod. MFV (1250×1250 / 1050×4900) Basic data: -Year of manufacture: 2005 -Block dimensions (L×W×H): 1250×1250 / 1050×4900 mm -Operating voltage: 3×400 V, 50 Hz -Power consumption: 77 kW -Blockmold with movable side wall -Complete vacuum system (GARDNER DENVER / SIEMENS) -Hydraulic system: REXROTH–BOSCH -Operational pre-loading silo for the blockmold with dedusting system Bsdsucvq Hepfx Agkold -Siemens PLC controller and Siemens touch-screen HMI control panel replaced with NEW units in 2019, including a control software upgrade -Siemens TOUCH SCREEN panel (replaced with a NEW one with a larger display) -MATTHEWS printer for block labeling/date marking -Block evacuation system with block storage -Complete set of documentation -Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550–4600 mm. TAG: Block mold, block mould, block-form, styrofoam, EPS, VIRO, Kurtz, Erlenbach, EREMA, Teubert, Lauscha, Autefa, HIRSCH, EPPINGER, Mert Makina

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A Bjdpfxouct Upj Agkeld

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Combo - contour cutter//cutting line: TECNODINAMICA mod. KAOBAND -Cutting line for blocks of size 4800x1200x1200 (finished block size) - Tipper - Guillotine for sectioning up to 2400 mm for the pantograph - Automatic rotation of the cut block for contour cutter/pantograph - Horizontal cutting with automatic wire positioning - Pantograph integrated in the first station with automatic wire positioning. - Automatic lower scrap miling - Side cutting with manual wire positioning Bodpfx Ajuct Szsgksld - Down cutter with manual wire positioning - Safety fences with micro switchs - PLC with INPUT/OUTPUT cards connected to the PC - Machine in excellent condition - Total length approximately 37m

Year of construction: 2011, condition: good (used), - Incl. extruder, corrugator, cutting saw, sliding saw, table, molds and die head / set Bodpfjua E H Sjx Agkold - Suitable for single wall pipes up to 220mm

Condition: used, Stretch blow molding machine from Etek ISBM Line = Injection Stretch Blow Molding Stretch blow molding machine for single-use PET bottles from PET preform blanks Stretch blow molding machine for rotary index production Manufacturer: ETEK / GF-Industries Type Supra 800 sv 1 Serial number: 22000225 Year of manufacture: 2012 Bedokucxlepfx Agkeld Power: 90 kW Mains connection: 400 Volt, 50 Hz Net weight approx. 6000 kg As new condition