Year of manufacture: 1988
Machine number: 88-9-126
manual height and tilt adjustment -0,5-47° for the main saw blade
as well as display of the swivel angle.
Double roller carriage incl. centre and end position locking device
- Carriage length 2500 mm
Rip fence with manual adjustment and
cutting width 1000 mm, with table extension
- manual adjustment with fine adjustment
cutting to length at angle stop 3200 mm with manual adjustment
with integral ...
In heavy professional version with scoring unit and format sliding carriage made of anodised aluminium
Standard with scoring unit with separate drive motor, adjustable from outside
Smooth-running anodised aluminium sliding table
Large table extension (longitudinally adjustable) with material roll on telescopic arm
Extendable telescopic crosscut fence with two flip stops
Precise rip fence, folds down for large plates, with quick clamping and integrated fine adjustment
Sawblade tiltable: 46 °
Length of the rolling table:3200 mm
cutting width:127 mm
Motor output:7 kW
Cutting height:136,5 mm
Cutting height at 45°:97 mm
Saw blade diameter:400 mm
Speed:3.500 + 5.000 U/min.
scoring unit with electrical height adjustment
adjustment, sliding table 3200 mm,
extension arm with movable support rail digital mitre gauge
1 piece crosscut fence digital 1900 mm
position controlled rip fence, SB 1250 mm
- Electromotive height and tilt adjustment 0 - 46 degrees
- Automatic correction of cutting height when swivelling
- Digital display of angle and cutting height
- Screen control with measurement input via keyboard
- 20 programmes can be stored
- USB interface for data transfer
- VARIO speed control 2000 - 6000 rpm.
- Double roller carriage 3,400 mm
- Paralel fence 1.300 mm, adjustable by electric motor
- Angle mitre fence
- 3-axis scoring unit RAPIDO Plus,
The length of the trolley: 2800 mm
The diameter of the saw: 300 mm
Maximum cutting width: 1300 mm
Work table size: 950x600 mm
Rear table: 950x750 mm
Side table: 800x500 mm
Extraction connector: 120 mm
Engine power: 4 kW
Power of the cutter: 0,75 kW
Dimensions of the machine
Lenght: 3100 mm
Width: 3620 mm
Height: 1420 mm
Altendorf WA 6
manual height adjustment,
sliding table length 2600 mm
Lowerable below table height
----- Technical data -----
Swivel range: 0 - 45 °,
Cutting width at rip fence: 1,000 mm,
max. cutting height: 87 mm,
max. saw blade Ø: 315 mm,
Swivel range of mitre fence: up to 49 °,
Speeds: 4,200 rpm,
Engine power main engine: 5.5 hp / 4 kW,
Motor power scoring motor: 0.5 PS / 0.37 kW,
Work table height: 910 ...
Sizing saw Martin T75L
year of construction 1972
cutting width 1050 mm
2800 mm carriage
Mounting for 2 saw blades
2800 - 4000 - 5500 rpm
Suction nozzle 120 mm
1600 x 2800 mm
Attention: available from Sep., 2021
Sizing saw make ALTENDORF type F 90
make # 6911133 year of construction 1969
cutting length 2800 mm
cutting width 1000 mm
cutting height 0 - 55 to 75 - 155 mm
4 speeds 3000 / 4000 / 5000 / 6000 rpm.
Saw blade diameter 250 - 450 mm
Saw blade bore 30 mm
Drive power 5,5 kW
power supply 380 V / 50 Hz
weight approx. 970 kg
used, in good condition
Panhans 690-B from company liquidation
year of construction 1999
2600mm sliding table
1300mm cutting width
saw blade max. 450mm
digital display for angle adjustment and speed
hydr. angle adjustment 0-46
5,5 KW engine power
narrow and wide hood
weight approx. 1000kg
Technical data si x
- cast iron saw worktable diam. mm 1000 x 685
- blades tilting - 46° ÷ +46°
- max. saw blade Ø with scoring blade installed mm 400
- max. saw blade projection from table at 90°/45° mm 136/97/60
- scoring blade diameter mm 160
- max. squaring stroke (standard) mm 2600
- cutting width on parallel fence [mm] 1270
Other technical features:
- three phase motors 7kW (9,4hp) 50Hz
- phase motor (scorer) 0,9kW (1,2hp) 50Hz
- exhaust outlets diameter mm 120 - 80
Sliding table saw
Machine number: V 24829
Maximum saw blade diameter 450mm
Dimensions trolley: 270x40cm
Maximum cutting width: approximately 70cm
Year of construction: 1998
Equipped with: Digital readable width adjustment, carriage
With machine service, repair and maintenance.
SCHULTZE Holzbearbeitungsmaschinen specialises in trading with new and used machines in the woodworking industry. These can be viewed and purchased in our warehouse in quantities by prior appointment.
The company also offers service and repair work.
Comfortable and precise woodworking with the highest quality for every training and craft enterprise. Saw unit can be swivelled by 46° on both sides. Programmable, electric saw blade adjustment
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.