Josef Gebhardt Formenbau GmbH

Condition: excellent (used), Year of construction: 2013, screw diameter: 22 mm, injection pressure: 2,000 bar, injection weight: 31 g, Arburg 270C 400-70 Golden Edition Clamping force: 40 t Year of manufacture: 2013 Injection weight: 31 g Injection unit: .../70 Screw diameter: 22 mm Specific injection pressure: 2000 bar Injection volume: 34 ccm Injection weight: 31 g Clamping system: 400/... Clamping force: 40 t Platen dimensions: 446 x 446 mm Mould height: 200 mm Opening stroke: 350 mm Max. platen distance: 550 mm Ejector stroke: 125 mm General data: Control system: Selogica Equipment: 2 x pneumatic valves 2 x hydraulic cores Multilift robot 3 hot runner zones Rotameter Bwjdpfx Asy I Uzxsk Hsl

Condition: good (used), Year of construction: 2002, Krauss Maffei KM 420-2700 C2 Injection Moulding Machine Basic Data • Manufacturer: Krauss Maffei • Model: KM 420-2700 C2 • Year of manufacture: 2002 • Serial number: 424227 Clamping Unit Bsdpfx Akjy I Tq Eo Hewl • Clamping force: 4200 kN (420 tons) • Mounting platen dimensions (HxV): 1270 x 1200 mm • Tie bar clearance (HxV): 800 x 800 mm • Min. mould height: 380 mm • Max. mould height: 1020 mm • Maximum opening stroke: 1400 mm Injection Unit • Screw diameter: 80 mm • Injection volume: 1433 cm³ • Shot weight: 1304 g (PS) • Maximum injection pressure: 1829 bar • Maximum temperature: 375°C Electrical and Hydraulic System • Power supply: 400 V • Phases: 3~ • Frequency: 50 Hz • Total current consumption: 237 A • Fuse protection: 250 A • Pump motor power: 75 kW • Heater power: 36 kW Dimensions and Weight • Machine weight: approx. 22,000 kg • Dimensions (L x W x H): 7.06 x 2.33 x 2.51 m

Condition: used, Year of construction: 2018, Serial no. 221903, control system, manufacturer Engel, type CC300, clamping force 400 t, installation height 450 - 950 mm, platen spacing 1,450 mm, 8 cascade valves, 24 hot runner zones, hydraulic core pulls 2 (DS) / 4 (AS), screw diameter 60 mm, shot weight 750 g, operating hours 30,738, machine weight 24,100 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 8, 2x 4-circuit block modules 125 °C, visualization unit, part removal handling, manufacturer Engel, type Viper 20 EP8, year 2018, serial no. 221917, part enclosure, belt discharge conveyor, manufacturer Engel, type FL4600 B600HLI, year 2018, serial no. 2101471, external temperature control unit and material dosing system not included in the offer. Bwsdpjy I Rxmsfx Ak Hjl

Condition: like new (used), Year of construction: 2023, operating hours: 1,900 h, clamping force: 1,600 kN, screw diameter: 105 mm, clearance between the columns: 1,87,01,420 mm, displacement volume: 4,546 cm³, total length: 13 mm, total width: 4 mm, total height: 3 mm, overall weight: 83 kg, pressure: 1,778 bar, 8 hot runner channels 16 sequential pneumatic valves Bsdpfx Asy I Apqsk Hswl 2 air blowers SERVO PUMP PC MC6 WEIGHT 83T DISTANCE BETWEEN PLATENS 3400MM

Condition: used, Year of construction: 2017, functionality: fully functional, Operational Haitian MA3800 - MA2500 - MA2000 - MA1600 injection moulding machines Bjdpfey Iydxjx Ak Howl

Condition: good (used), Year of construction: 2016, Ref. no.: 18657 Hersteller: ENGEL Type: e-victory 440/160 CC300 ecodrive Year of construction: 2016 Clamping unit Clamping force: 160 ton Opening stroke: 900 mm Mould height min.: 300 mm Mould height max.: 600 mm Platen size (h x v): 750 X 750 mm Injection unit Screw diameter: 35 mm Injection volume: 168 cm³ Shot weight: 151 g Injection pressure: 2400 bar Measurements and weight Dimensions: 5,7 X 1,8 X 2,2 m Machine weight: 10200 kg Further information: Tie-bar-less + electric injection = maximum flexibility and precision Bedpfoy Ipgpjx Ak Hswl ENGEL e-victory 440/160: 👉 This is a hybrid machine (servo-hydraulic + electric) ⸻ 🔍 How it works ✔ Electric part: * Injection unit (screw movement) * Ensures very high precision and process stability ✔ Hydraulic part: * Clamping unit (mould closing) * Maintains clamping force efficiently without continuous energy consumption 👉 This system combines: * The precision of an all-electric machine * With the power and efficiency of a hydraulic system This is a modern servo-hydraulic injection moulding machine from the well-established ENGEL e-victory series, known for its energy efficiency, high precision, and tie-bar-less design. The machine has a clamping force of 160 tons and is ideally suited for technical plastic parts as well as demanding applications in industries such as automotive, medical, and general manufacturing. Key features: * Tie-bar-less design for maximum mould flexibility * Servo-hydraulic drive for high energy efficiency * Precise and stable processing performance * Compact footprint with a large mould installation area * Modern ENGEL control system The machine was manufactured in 2016 and appears to be in very good condition, both technically and visually, as can be seen in the pictures. Thanks to its tie-bar-less design, this machine offers clear advantages when working with large or complex moulds and ensures highly flexible production.

Condition: ready for operation (used), Year of construction: 2019, operating hours: 21,000 h, clamping force: 1,270 kN, total width: 1,500 mm, total height: 1,700 mm, overall weight: 5,300 kg, product length (max.): 5,100 mm, This 3-axis SHIBAURA EC130SXIII-4A was manufactured in 2019. It features a clamping force of 1270 kN and a mold opening stroke of 400 mm. The machine has a maximum distance between platens of 950 mm and platen dimensions of 720 x 670 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC130SXIII-4A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 510 x 460 mm • Platen dimensions (H x V): 720 x 670 mm • Mold opening stroke: 400 mm • Max. distance between platens: 950 mm • Mold height (min–max): 180–550 mm • Ejection force: 30 kN (3.0 tf) • Ejection stroke: 90 mm • Injection unit code: 14 • Nozzle touch force: 17.7 kN (1.8 tf) • Injection speed (standard): 300 mm/s • Injection speed (high torque): 200 mm/s Bjdpfx Ajy Iffnjk Hjwl • Injection speed (high speed): 400 mm/s • Main breaker capacity (standard/high torque): 100 A • Main breaker capacity (high speed): 125 A • Transformer (standard): 75 kVA

Condition: ready for operation (used), Year of construction: 2020, operating hours: 20,000 h, clamping force: 2,250 kN, screw diameter: 55 mm, total width: 1,700 mm, total height: 2,000 mm, overall weight: 9,900 kg, product length (max.): 6,400 mm, This 3-axis SHIBAURA EC230SXIII-8A was manufactured in 2020. It features a clamping force of 2250 kN and a mold opening stroke of 550 mm. The machine has a maximum distance between platens of 1230 mm and a screw diameter of 45 / 50 / 55 mm. If you are looking to get high-quality injection molding capabilities, consider the SHIBAURA EC230SXIII-8A electrical injection moulding machine we have for sale. Contact us for further details. • Distance between tie bars (H x V): 610 x 560 mm • Platen dimensions (H x V): 880 x 830 mm • Mold opening stroke: 550 mm • Max. distance between platens: 1230 mm • Mold height (min–max): 250–680 mm • Ejection force: 49 kN (5.0 tf) Bjdoy Ifctopfx Ak Hswl • Ejection stroke: 130 mm • Injection unit code: 18 • Screw diameter: 45 / 50 / 55 mm • Max. injection capacity: 318 / 392 / 475 cm³ • Injection weight (PS): 292 / 361 / 437 g • Injection weight (PE): 232 / 286 / 346 g • Max. injection pressure: 247 / 200 / 165 MPa • Max. holding pressure: 247 / 200 / 165 MPa • Nozzle support force: 29.4 kN (3.0 tf) • Main breaker capacity (STD/High Torque): 125 A • Main breaker capacity (High Speed): 175 A • Transformer (STD): 75 kVA • Heating power: 15.2 / 16 kW

Condition: ready for operation (used), Year of construction: 2006, operating hours: 40,737 h, clamping force: 2,700 kN, overall weight: 8,800 kg, Vertical injection moulding machine manufactured in 2006. This Kloeckner Desma 968.250 ZO features a clamping force of 2700 kN and an injection volume of 2000 cm³. It includes additional equipment such as 2 ejectors and a vacuum pump. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma 968.250 ZO machine we have for sale. Contact us for further details. • EUROMAP Size: 2700–3500 Bwjdpfx Aoy Icw Ujk Hol • Injection Volume: 2000 cm³ • Injection Pressure: 1730 bar • Nozzle Force: 75 kN • Operating: DRC 1210 • Electrical connections: 3 x 400V / 50Hz Additional equipment • 2 ejectors • vacuum pump

Condition: ready for operation (used), Year of construction: 2001, clamping force: 3,000 kN, overall weight: 13,900 kg, This 5-axis DEMAG ERGOTECH CONCEPT 3000-1450 was manufactured in 2001. It features a clamping force of 3000 kN and a machine weight of 13.9 tonnes. With a maximum hydraulic pressure of 190 bar and a flow rate of 164 l/min, this machine is designed for efficient operation. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH CONCEPT 3000-1450 hydraulic injection moulding machine we have for sale. Contact us for further details. • Max. Hydraulic Pressure: 190 bar • Max. Flow Rate: 164 l/min • Total Amperage: 181 A • Heating Amperage: 102 A • Drive Amperage: 79 A • Control Amperage: 67 A • Operation Voltage: 400 V Bwsdpjy Iciksfx Ak Hsl • Frequency: 50 Hz • Certification: CE

Condition: excellent (used), Year of construction: 2015, ARBURG A 1500 T 2000-400 Drehtisch (29.844 h) (S&P 3792) Manufacture year: 2015 Operating hours: 29,844 Stunden Screw: 40 mm Injection pressure: 2000 bar Stroke volume: 201 cm³ Clamping Force: 200 t Tie bar distance: 1500 mm Mould installation height min.: 400 mm Plate distance max.: 700 mm Dimensions: 4700 x 2100 x 2600 mm Eeight: 11500 kg Connected load: 22 kW 1500mm Table-diameter, 2-station (180°) turntable, 2 x Corepuller, Airvalve, Interface Colorizing, Hotrunner, price when new approx. 250.000,- € etc... Price: on request contact: Mr. Ralf Schulz Bedpfx Ajy Ib Raek Howl

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Bwsdpfx Aey Ib I Sok Hel Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz Bsdpfx Akey Ib Ixj Hewl

Condition: ready for operation (used), Year of construction: 2019, clamping force: 1,200 kN, total width: 2,200 mm, total height: 2,065 mm, overall weight: 8,450 kg, product length (max.): 5,259 mm, Hydraulic injection moulding machine manufactured in 2019. This Engel Victory 120 BMG features a clamping force of 120 t and a tie-bar-less design, ensuring efficient operation. It includes a high-speed injection unit and an advanced CC300 control system with a 21.5" full HD touchscreen. If you are looking to get high-quality injection moulding capabilities, consider the Engel Victory 120 BMG machine we have for sale. Contact us for further details regarding this machine. • Tie-bar-less design • Machine hours: on-time 2,767 h; estimated operating time ~200 h (never used for regular series production) • Oil filling: 300 L • Power supply: 3x400 V + N + PE / 50 Hz • Control system: CC300, 21.5" full HD touchscreen • Hydraulic system: ecodrive SHV3-HSI servo-hydraulic • High-speed injection with accumulator • Oil cooler: standard • Injection unit size: hydraulic 200 • Platen size: standard Euromap • Mould height: increased +200 mm • Opening stroke: extended +200 mm • Ejector system: platen ejector • Core pull: hydraulic and pneumatic • Cooling water connections: machine and mould separate • Flow regulator: 0–10 l/min • e-flomo temperature control system: 4 and 6 circuits • Remote service: e-connect.24 (2 years) Additional equipment • Robot: ENGEL viper 12 RC300 • Max payload: 12 kg • Strokes: Z 1,160 mm; X 600 mm; Y 900 mm • C axis: pneumatic 0–90°, 30 Nm Bodpfsy Ib Aijx Ak Howl • Max system height: 3,600 mm • Min deposit height: 1,000 mm • Integrated conveyor belt • Belt width: 350 mm • Belt temperature resistance: up to 300 °C • Temperature control unit: HB-Therm Thermo-5 HB-160Z1 • Max temperature: 160 °C • Heating power: 8.0 kW • Pump: 0.50 kW, 30 L/min, 52 m • Cooling capacity: 30 kW @ 60 K • Vacuum pump: Pfeiffer DUO 35, 32 m³/h • Induction heating system: 50 kW, 50–200 kHz • Melting chamber: max ingot weight 100 gNo plastic extruder included!

Condition: used, Year of construction: 2013, operating hours: 33,000 h, clamping force: 320 kN, displacement volume: 678 cm³, injection pressure: 2,000 bar, overall weight: 15,000 kg, screw conveyor diameter: 60 mm, terms of delivery: EXW (ex Works) delivery time: on request terms of payment: 100% prior to delivery Bsdsy Hxr Sspfx Ak Hjwl

Condition: like new (used), Year of construction: 2023, Technical Data: Maximum clamping force: 3,500 kN Maximum locking force: 3,850 kN Opening stroke: 725 mm Minimum mold installation height: 400 mm Maximum mold installation height: 900 mm (extended) Clamping plate size (H x V): 1,168 x 1,144 mm Clear tie bar distance (W x H): 830 x 830 mm Maximum mold weight: 6,600 kg Maximum weight on moving clamping plate: 3,800 kg Maximum weight on fixed clamping plate: 5,100 kg Ejector stroke: 250 mm Ejector force (increased): 100 kN Maximum ejector speed: 270 mm Screw diameter: 60 mm Injection pressure: 2,426 bar Maximum injection volume: 891 cm³ Maximum injection speed: 160 mm/s Maximum dosing stroke: 315 mm Maximum nozzle travel: 520 mm Nozzle immersion depth: 20 mm Back pressure programmable via dosing stroke Installed cylinder heating: 23.1 kW Material hopper capacity: 110 l Weight: approx. 21 t Equipment: Robot: Manufacturer: SEPRO ROBOTIQUE (France) Bodpfx Akjy Hmfyo Hswl Type: 5T35 2000/900/TE-1800 Year of manufacture: 2023 Stroke: 2,000 mm Speed: 3.5 m/s Horizontal demolding stroke Y-axis: 900 mm Vertical demolding stroke X-axis: 1,800 mm Robot console mounted on fixed clamping plate Gripper function R1 (C) axis pneumatic 0° - 90°, including quick-change plate Weight: 583 kg MuCell Integration: Included in the special option: • Plasticizing cylinder with pneumatic shut-off nozzle, without mixing element and without non-return valve; • The plasticizing cylinder must not be used for continuous compact injection molding; • Interface (communication, emergency-stop interface); • Software with functional display pages for control of the MuCell function; • Adapted nozzle guard; • High-speed screw position control (analog to ZE388) Conveyor belt: Width: 870 mm Usable width: 800 mm Length: 3,500 mm Height: 880 - 1,220 mm Load capacity: 38 kg/m² Belt speed: 5.7 m/min Number of frames: 2 Clear tunnel height: 500 mm This injection molding machine is fully equipped!! Condition: As new condition, only 5,290 operating hours

Condition: ready for operation (used), Year of construction: 2002, clamping force: 1,200 kN, screw diameter: 40 mm, overall weight: 7,400 kg, Hydraulic injection moulding machine manufactured in 2002. This Engel VICTORY 500/120 features a robust design with a weight of 7400 kg. It includes an integrated keypad and screen for user-friendly control. If you are looking to get high-quality injection moulding capabilities, consider the Engel VICTORY 500/120 machine we have for sale. Contact us for further details. • Control interface: Integrated keypad and screen (Engel branding) Bwjdoy Hhwdopfx Ak Hsl • Power switch: Manual rotary main switch (labeled "Do not actuate under load")

Condition: excellent (used), Year of construction: 2008, 1,0 St. gebr. Spritzgießmaschine Hersteller: KRAUSS MAFFEI Typ: KM350-2000CX Baujahr: 2008 Schließkraft: 350 Tonnen Holmabstand 710 x 710 mm Schnecken DN: 55 mm Max. Hubvolumen: 570 cm³ Spritzteilgewicht: 519 g/PS Steuerung: MC5 Ausstattung: 2 St. Kernzug Roboter Hersteller: SEPRO 45- Fach Heisszonenkanalregelung Bodpjy E Nv Esfx Ak Hswl Schnittstelle Temperiergerät Ca. 67.530 Betriebsstunden

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, clamping force: 1,225 kN, screw diameter: 30 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bwedpfxoy Exags Ak Hel Clamping force: 125 t Screw diameter: 30 mm Note: When purchasing multiple items from the same location (see offers below), you will only be charged the lowest applicable costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, clamping force: 2,942 kN, screw diameter: 70 mm, displacement volume: 1,039 cm³, No minimum price – guaranteed sale to the highest bidder! Engel injection moulding machine including robot! TECHNICAL DETAILS Clamping force: 300 tons Screw diameter: 70 mm Max. shot volume: 1,039 cm³ EQUIPMENT 3x core pulls Robot Note: When purchasing multiple items from the same location (see offers below), the respective lower costs for dismantling and loading will be waived. Bedey Ew U Aepfx Ak Howl

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, clamping force: 2,157 kN, screw diameter: 35 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bodpsy Ew Tljfx Ak Hjwl Clamping force: 220 t Screw diameter: 35 mm MACHINE DETAILS Tie bar spacing: 520 x 520 mm Note: When purchasing multiple items from the same location (see offers below), you will be granted the lower costs for dismantling and loading.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, clamping force: 2,157 kN, screw diameter: 55 mm, displacement volume: 618 cm³, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 220 tons Screw diameter: 55 mm Volume: 618 cm³ MACHINE DETAILS Bsdpfx Asy Ew S Ijk Howl Platen size: 860 x 830 mm Minimum mould installation height: 250 mm Maximum mould installation height: 730 mm Note: When purchasing multiple items from the same location (see offers below), the lower cost for dismantling and loading will be applied.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 3,432 kN, screw diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 350 tons Screw diameter: 60 mm Note: When purchasing multiple items from the same location (see offers below), you will be charged the lowest applicable costs for dismantling and loading. Bwodpsy Ew Shjfx Ak Hol

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, clamping force: 1,471 kN, screw diameter: 50 mm, injection weight: 353 g, plate length: 820 mm, plate width: 750 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bwjdpfx Aoy Ew R Dok Hol Clamping force: 150 tons Screw diameter: 50 mm Shot weight: 353 g MACHINE DETAILS Enlarged clamping platen: 820 mm x 750 mm Note: If you purchase multiple items from the same location (see offers below), you will only be charged the lower cost for dismantling and loading.

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, clamping force: 1,961 kN, screw diameter: 60 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bwjdpfjy Ew D Rex Ak Hsl Clamping force: 200 tons Screw diameter: 60 mm Tie bar spacing: 520 x 520 mm Note: When purchasing multiple items from the same location (see offers below), you will benefit from the most favorable dismantling and loading costs.