Specifications
Processable bar diameters
Min. Ø 10 mm - Max. Ø 61 mm
Supply voltage
230 V trifase 50/60 Hz three phase
Feed speed
0 - 627 mm/sec. 0 - 24,70"/sec.
Lubricating oil for guide channels
ISO VG 100
Required compressed air
8 bar
Weight
1.000 kg
Bar length
2 m
Buadw8f3xd
diameter 42 mm
length 6000 mm
Bil9csg7al
total power requirement 2 kW
weight of the machine ca. 1 t
dimensions of the machine ca. 6,4x0,6x1,8 m
- guide channel (oil guided)
- bar length: 500 - 3.200 mm
- portable panel
- inclusive guide channel Ø 65 mm
- max. barpusher moving out: 1.390 mm
- lunette (as roller or bushing lunette useable)
O9rvt
- weight ca. 1.800 kg
- dimensions LxWxH 4.420x900x1.400 mm
Bar loading magazine for multi spindle automatic lathe, new
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: DBM/DBMF
Design: Surface loading magazine or bundle loading magazine
diameter range: 6-67mm
DB-EVO at a glance:
Proven technology - in use for decades
The material feed of this loader generation is carried out by the machine. Bar loaders DBM/DBMF are mounted on rails, so that they can be easily separated from the machine at any time by unlocking t...
diameter 42 mm
length 4200 mm
Control
total power requirement 1 kW
weight of the machine ca. 1,5 t
dimensions of the machine ca. 5,8 x 0,5 x 1,6 m
Bqztm3ujug
Bar feeder FMB 5-42-4200-C, year of manufacture 2004.
Equipment 2 channels.
Bar length max. 4200 mm
Was mounted on sliding headstock machine Citizen M32. Therefore equipped with
synchronous unit.
diameter 5- 65 mm
length 1500 mm
Control S7
Bp0gswlo
air pressure - required 6 bar
total power requirement 1 kW
weight of the machine ca. 240 kg
dimensions of the machine ca. 2 x 1 x 1,5 m
max. bar capacity 32 mm
bar length 3.200 mm
compressed air 6 bar
weight of the machine ca. 0,9 t
0 380 V / 50 Hz
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Bly7mjpdoo
Bar Feeder
IEMCA - Boss 332-E 32 N
Heat output capacity: KW
air volumen: m³/h
weight of the machine ca.: t
control: Siemens
bar material dia.: min: 6 / max: 80 mm
Bar length: 1200 mm
voltage: 400 V / Hz
Dimensions (LxWxH): 2,0 x 1,4 x 1,5 m
D3xb08ijy
weight: ca. 520 kg
The bar feeder is currently in the technical department.
bar Ø: 5 - 100 mm
bar length: 150 - 1600 mm
(depends on spindle length)
servo drive
double feed system
autom. adjustment of guid channel
autom. adjustment of bar separation
Bn3maeayjs
mobile control panel
loading area: 650 mm x 1650 mm
Only use for one short job!
Automatic bar loading magazine for single spindle automatic lathe / short lathe, new
TEST the new DB-EVO bar loader
4 WEEKS, NON-BINDING, FREE OF CHARGE (conditions on request)
very high speeds even with profile material
Manufacturer: Giovanni Cucchi
Machine type: Automatic bar loading magazine for single-spindle / short turning
Type: DB-EVO
Design: Surface loading magazine or bundle loading magazine
diameter range: 20-110mm
DB-EVO at a glance:
Scope of delivery and optionally orderable funct...
EMCO Top Load bar feeder ETL8-45
Owknp
bar diameter from Ø8mm - Ø45mm
Bar length up to 3300mm
General:
Year of manufacture 2008
bar length 100 - 3.200 mm
bar diameter drum 1 - 7 mm
Number of guide tubes 36
weight approx. 600 kg
Bt8a2n3x0y
dimensions 4.863 x 490 x 1.470 mm
Was installed on a CNC long lathe from Maier
max. bar capacity 32 mm
bar length 3.200 mm
compressed air 6 bar
weight of the machine ca. 0,8 t
0 380 V / 50 Hz
dimensions of the machine ca. 4,0 x 1,0 x 2,0 m
Oeckr
Bar Feeder
IEMCA - Boss 432 32 N
diameter 3 - 16 mm
length 3000 mm
= bar loading magazin
for bar-ø 3 - 16 mm, bar length 3000 mm, capacity for example 23 bars 8 mmø
No3ut
- max. bar length: 3.200 mm
- guide channel: Ø 22 + 11 mm
- was installed at TRAUB A 25
- storage capacity 300 mm (e.g. 30 bars x 10 mm)
- min. length of bar: 1000 mm
- bar changeover time: ca. 25 sek.
- weight: ca. 750 kg
- dimensions LxWxH: 4500 x 460 x 1500 mm
Br8ywymuo2
used short bar loader in very good condition
Btxnq9umzv
Manufacturer's machine number 35-250167 R 1241291
bar material dia. 6 - 67 mm
bar length 1525 mm
Channel sizes . mm
voltage 400 V
total power requirement 0,4 kVA
weight of the machine ca. 350 Kg
dimensions of the machine ca. 2,15 x 1,10 x 1,20 m
- Fab.-No.: 27-0008
Bfi0nl3qsv
- the bar feeder unit was
installed at a CNC-Turning Center
Hwacheon HiTech 200B
General information:
Year of manufacture 2002
bar length 100 - 3.200 mm
bar diameter drum 1 - 7 mm
Number of guide tubes 36
weight approx. 600 kg
dimensions 4.863 x 490 x 1.470 mm
was installed on a long lathe Citizen
Bt79wy3d07
Heat output capacity / KW
air volumen / m³/h
weight of the machine ca. t
dimensions of the machine ca. m
Bzzckqg3
diameter 15 mm
length 800 mm
Vssmau
= bar loading and de-loading magazine
for bars up to 15 mmø, bar length 800 mm
Heat output capacity: KW
air volumen: m³/h
weight of the machine ca.: t
passage diameter: 3 bis 23 mm
Bar length: ca. 3200 - 4200 mm
Npn07
Dimensions (LxWxH): 4,2 x 0,5 x 1,2 m
weight: ca. 500 kg
other features of the bar feeder:
- 200-480V; 24 VDC
- electrical interface
- mobile control panel with touch screen
- automatic adjustment of feed force, speed and length
- Loading via side magazine left/right
- Rest piece retraction system (rest lengths min./max.: 90 / 400mm
- Residual length containe...
diameter 35 - max. 65 mm
Guide channels 6
control SPS
max. bar length 3.200 mm
bar material dia. min. 35 mm
bar material dia. max. 65 mm
total power requirement 2 kW
weight of the machine ca. 2,0 t
dimensions of the machine ca. 4,0 x 1,1 x 1,6 m
Vz9yuowc
Multi-Channel-Bar-Feeding-System
BREUNING IRCO - 65.6 196.6
- has been installed at a Mori Seiki ZL 200 SMC
Bar loading magazine for multi spindle automatic lathe, new
Manufacturer: Giovanni Cucchi
Machine type: Bar loading magazine for multi-spindle
Type: CMSP/CMSPF
Design: Side loader as surface loading magazine or bundle loading magazine
CMSP / CMSPF at a glance:
Proven technology - in use for decades
Bk3ytpss98
The material feed of this loader generation is carried out by the loading magazine. Bar loading magazines CMSP/CMSPF are mounted on rails, so they can be easily disconnected from the mach...
bar material dia. 2-20 mm
Bobcd8zvnj
Bar length 1200-3250 mm
weight of the machine ca. 440 kg
dimensions of the machine ca. 3,9x0,5x1,2 m
Working speed 100 m/min
2
The HRS52 roller stand is an inexpensive alternative, ideal for mounting on band saws, circular saws or other machines.
Technical data:
Bttlhuszmp
Support width: approx. 350 mm.
Load capacity up to approx. 700 kg
Height adjustable approx. 580 to 970 mm.
The weight is approx. 16 kg.
Roller diameter approx. 52mm
Barfeeder
Capacity and type of bars
Round bars 8 - 65 mm
Hexagonal bars 7 - 55 mm
Length of bars max. 2100 mm
Machine has been used behind Dosan TT 1800 SY with Fanuc 31i- Model A
D7edp7x2
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Breuning IRCO 65.8270.8R
Multi-channel bar feeder
max. bar length: 3000 mm
bar diameter: 5 - 65 mm
guide channels: 8 pieces
Ø 25 , 32 , 38 , 42 , 50 , 56 , 60 , 65
Garwels machines and service
The right choice
We would be pleased to make you an offer for our additional services
- Transport of the machine
- Assembly of the machine
- Commissioning of the machine
- instruction
We are exactly the right contact for
B9to7s7
- repair
- maintenance
- service
Our team is ready for you.
Please also visit ...
max. bar length max. 3.200 mm
bar material dia. 5 - 70 mm
change time ca. 30 sec
Loading Length 3.250 mm
rapid traverse 30 (70) m/min
dimensions of the machine ca. 5,0 x 1,5 x 2,0 m
Yr0xjo
weight ca. 1,5 t
total power requirement 2 kW
Single-Channel bar loading magazine
BREUNING IRCO - SiMag 70.1 R
- incl. misc. feed-channels 13, (23), 33mm
Bar loader
Bsps97egvb
IEMCA Boss 545 E Type 21 L
Short loader
Year of construction: 2007
The loader was attached to a Müga machine.
Bar length: 3000 mm
max. Bar diameter: 32 mm
Wv7syp0z
Length x width x height: 4000 × 500 × 1000
Weight: 800 kg
General:
Year of manufacture 2015
Bar length 3.200 mm
O7yqr
bar diameter 6 - 52 mm
Weight approx. 1.600 kg
KUPA 1500 bar feeder
for lathes
Btme370txt
was connected to a Gildemeister CTX400...
without warranty
ILS IRCO Breuning barfeeder offered.
Type: RBK 10012
Power: 400 V
Remote control: Esitron HBG 10
Year of built: 2007
Fb90m2p
Included documentation and software
Dimensions: 200x100x140 cm LxWxH
For more information call us or send an e-mail.
Short bar loader IRCO ILS-RBK 7212 27-03-008
Delivery time: immediately
Number: 27-03-008
Machine data
Year of construction: approx. 1999
L x W x H: approx. 2500 x 1070 x 1700 mm
Weight: approx. 450 kg
Very good general condition
Technical specifications
Control: via CNC machine
Rods - diameter: approx. Ø 5 - 70 mm
Rod length: approx. 600 - 1200 mm
Bsdwjkdl9t
Power supply: approx. 380 & 230 volts
Equipment:
-Material - support bracket
Further accessories on request
Price and furthe...
Barfeeder, Capacity 6 bars, Ø 4 - 32 mm, L = 3000 mm
B32x80qh
FMB 10-65 Turbo barfeeder from 1998. Machine is in good working condition.
Complete with
- Conversion kit of 25mm (new in 11/2010)
- Conversion kit of 42mm (new in 04/2011)
Bs9a9cbior
- Conversion kit of 65mm
- Several (new and used) collets.
- Books and documentation
Hydrafeed multifeed Mx-1B
Serial number 5078
Kb0lrcl2
Input volts 415V
Output volts 115V
Bar size 3mm - 80mm
Bar length 200mm - 1600mm
Barfeeder
Capacity and type of bars
Round bars 10 - 65 mm
Hexagonal bars 52 mm
Length of bars max. 3200 mm
If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.
Feel free to view our other advertisements for a complete overview of our stock.
Elkgwa9ji
ILS IRCO Breuning barfeeder offered.
Type: RBK 10012
Bth2x8gn9m
Power: 400 V
Remote control: Esitron HBG 10
Year of built: 2014
Included documentation and software
Dimensions: 200x100x140 cm LxWxH
For more information call us or send an e-mail.
Short bar loader
Manufacturer: Irco
Type: RBK 10012
Year of manufacture:2003
bar length: 250 - 1.250 mm
bar diameter: 5 - 100 mm
Bfrtdzlpqr
...
Short bar feeder Irco Breuning MUK 7012 year 2011
bars max : 6 to 70 mm
Length : 1500 mm
Condition : as new, little used !
Bslv0pjjrb
IRCO SIMAG 70.1
F3cxzlwd
Bar feeder was connected to an Emco 465.
- Bar length : 1500 mm
- ∅ maxi round bars : 5 - 80 mm
- ∅ maxi hexagonal bars : 5 - 65 mm
- Weight : 640 Kg
Bslsdseeys
For use at SCHUETTE AG 20
barfeeder instead of guiding tubes
J9achr
feed and remnant removal
- 4 default guide channels Ø 9-13-19-26 mm
- incl. 8 barpushers for guide channel Ø 19 mm
- stockage: 22 bars + 200 mm locating surface
- dimensions LxBxH: 5500 x 1300 X 1900 mm
- weight: 1.900 kg
Bar loader. Max bar length 3m, max diameter 20 mm.
Bdh0zmadit
3 Pieces Automatic Bar loader IEMCA TAL AUTO.
Bphpjvlvbx
Bar diameter 30 - 65 mm
Bar length 3000 mm
Opanv
- Servo drive
- Double feed
S73d9p
- Automatic adjustment of the guide channel and bar separation
-mobile control panel
Bar diameter 5 - 100mm
Bar length 150 - 1600mm (depending on spindle length)
Loading area 650 x 1650mm
1 USED BARLOADER IEMCA BOSS 542/32
- Serial number: 92102020
- Year: 2002
- Stock N °: EX573
Brj7wukfuy
- Ø of the stroller: 42 mm
Bar feeder Fabr. IEMCA type AS 325/32
Dv98vu
Masch.# 87041309 built in 1987
Technical data:
Rod sizes from 3-25 mm
Rod length of max. 3210 mm
Magazine capacity (E.g. 30 x 10 mm) 300 mm
Feed speed 200-600 mm / sec.
1.0 kW
Weight 530 kg
External dimensions approx. 4470 x 460 x 1500 mm
used, in very good condition
This may be of interest to you
Morlock Motors official partner of Machineseeker and Truckscout24
How to receive 100% of our e-mails
