Ingplan Hamburg Rohstoffmanagement GmbH

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: 58517824, overall weight: 10,000 kg, inner dimension height: 2,370 mm, inner dimension length: 12,200 mm, inner dimension width: 3,000 mm, total length: 13,075 mm, total width: 3,410 mm, total height: 3,470 mm, type of input current: AC, conveyor belt width: 3,000 mm, conveyor belt speed: 15 mm/s, axle spacing: 12,500 mm, Technical details: Lrsdpfszvbldox Aiyjr Chain: Full pin chain with idler roller, DIN 8167, M112 (breaking force 160 kN), pitch 160 mm Drive: Flat gearbox motor, FR left, SEW FA127/G R77 DRN90S4/TF, 230 / 400 V, 50 Hz, IP 54, IE3, ISO B, 1.10 kW, 0.91 rpm, design M1, mounting height 100 mm Construction: Edge profile 5 mm Belt quality: EP 400 / 3, cover 4:2, oil and grease resistant, both sides with edge-flush T-cleats 20 mm, 26,000 mm endless The conveyor belt has been out of operation since approximately early 2020. The system has been partially dismantled; Figure 1 shows an identical system, which could also be inspected while in operation. The drive motor (1.1 kW) is not available. The steel substructure is only partially present.

Condition: used, functionality: fully functional, screw conveyor length: 5,000 mm, pump capacity: 1,000 l/min, For sale is a flexible screw conveyor for bulk materials, with a 5-meter hose length, a three-phase motor, and a reduction gearbox. The unit does not operate within a rigid pipe but rather within a flexible plastic hose, making it easily transportable, versatile in use, and gentle on the material being conveyed (low dust and noise generation). We purchased the unit used and tested it briefly. It proved unsuitable for our specific material (too moist for this hose type) but was always fully functional and ready for use. It is ideal for dry, free-flowing bulk materials such as grain, pellets, or sawdust/wood dust. It is not suitable for wood chips (too coarse/irregular for the hose). Equipment: - Flexible hose with a conveying screw made of spring steel Lredpfx Aijzrzklsysr - Inlet with protective grid and slide gate - Drive located at the top, with a three-phase motor and a flange-mounted reduction gearbox - Easily transportable, universally applicable - Connection cable with switch (6m) Technical data: Parameter Value Overall length 6 m Hose length 5 m Hose inner diameter 75 mm Smallest bending radius in operation approx. 1.5 m Conveying height up to approx. 3 m Conveying capacity approx. 1,000-1,200 kg/h (for grain) Motor Three-phase motor 400V / 0.75 kW Connection cable 6 m, with switch in the middle of the cable Plug CEE 5x16 (16A) Weight 42 kg Packaging dimensions (with pallet) 120 x 120 x 35 cm Scope of delivery: 1x Screw conveyor with gearbox and motor 1x Connection cable with switch Condition: Used, very little use, fully functional. No defects; simply unsuitable for our specific (too moist) material. Location: 6064 Kerns (self-collection; transport can be arranged).

Condition: good (used), Trough conveyor belt Length: 32 meters Belt width: 65 cm Can be disassembled into 3 parts Ledszcyazepfx Aiyerr 7.5 kW drive motor Good condition

Condition: repair required (used), Year of construction: 2013, functionality: not functional, machine/vehicle number: AW016804, A-WARD UO20 CONTAINER TILTING SYSTEM, designed for the safe and efficient handling of 20-foot ISO containers in bulk material handling operations. The equipment allows for hydraulic tilting of the containers from 0° to 90°, facilitating the quick loading or unloading of bulk products such as scrap metal, minerals, grains, or other loose materials. • Type: container tilter with universal frame • Application: loading/unloading of 20-foot ISO containers • Tilting range: hydraulic tilting from 0° to 90° • Operation: self-contained hydraulic system with remote control • Status: available for sale • Condition: available for inspection Lrjdpfx Aiszbtu Ajysr The system improves safety, productivity, and loading efficiency by enabling controlled gravity-fed handling of bulk materials directly within the containers. Remarks: The unit is sold in its current condition. It is missing hydraulic hoses, and the weighing system is not operational.

Condition: ready for operation (used), There are 15 identical loading systems available. Product-contact parts made of stainless steel 1.4301, outlet diameter: 400mm, nominal diameter: DN 300, extended length: 5237mm, retracted length: 1252mm, telescopic length (stroke): 2885mm, max. loading capacity: approx. 50t/h, connected load: 0.55kW, weight: 245kg. An on-site inspection is possible. Lodpfxjy Tn Ngj Aiyerr

Condition: used, Vacuum pneumatic conveying system Includes valve, pneumatic vibrators Lodpfxey Ti D Se Aiysrr Excluding filter bags Diameter +/- 550mm Suction line diameter 63mm See our other listings.

Condition: refurbished (used), Scraper for chips/wood chips Lrodpfsy R Ugyex Aiyjr Carrier width: 640 mm Straight section: 4 m Inclined section: 4 m Completely overhauled

Condition: good (used), Year of construction: 2023, operating hours: 1,031 h, functionality: fully functional, overall weight: 18,999 kg, Belt width: 1,200 mm Belt length: 30,500 mm Dimensions in working position: 28,219 x 2,489 x 12,268 mm (L x W x H) Discharge height at 22° inclination: 12,268 mm Engine manufacturer: Cat C2.8 Operating weight: 18,999 kg Transport dimensions: 16,078 x 2,489 x 3,149 mm (L x W x H) Engine power: 55 kW Lodpfoyw Hlujx Aiyerr Throughput: approx. 700 t/h

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SCC, warranty duration: 12 months, volume flow: 45 m³/h, screw conveyor length: 6,000 mm, type of input current: three-phase, screw diameter: 323 mm, input voltage: 400 V, rotational speed (max.): 240 rpm, rotational speed (min.): 140 rpm, Custom-manufactured to order. Send us your diameter, length, and installation angle — receive a full technical quote within 24 hours. INOTEK SCREW manufactures heavy-duty SCC-type cement screw conveyors for bulk material handling in cement plants, dry mortar facilities, fly ash transfer, lime and gypsum processing lines. Based in Ankara, Turkey, we have supplied equipment to over 40 countries with full export documentation and ISO 9001:2015 certified production. KEY SPECIFICATIONS: - Diameter: Ø114 / Ø168 / Ø219 / Ø273 / Ø323mm – any size made to order - Drive speed: 140 / 200 / 240 RPM - Motor power: 1.5 kW to 22 kW (IE2 efficiency class) — Siemens motors standard - Material: Carbon steel S235/S355 standard | AISI 304/316 stainless steel on request Ljdpfx Aisyq H Iusysrr - Screw flights: cold-rolled, 3–10mm thickness - Orientation: horizontal, inclined (up to 45°), or vertical - Custom inlet/outlet: conical, square, or rectangular - Surface treatment: primer + epoxy topcoat standard | hot-dip galvanizing on request CAPACITY BY DIAMETER (approximate, horizontal, cement powder): - Ø114 mm → 4–8 m³/h - Ø168 mm → 10–18 m³/h - Ø219 mm → 20–30 m³/h - Ø273 mm → 30–40 m³/h - Ø323 mm → 40–55 m³/h All values depend on RPM, inclination angle, and material bulk density. Custom diameters and capacities available on request. APPLICATIONS: Cement | Fly ash | Limestone powder | Dry mortar | Gypsum | Clay | Silo filling & emptying | Batching plants | Asphalt facilities WHY INOTEK: ✔ CE marked — compliant with EU Machinery Directive 2006/42/EC ✔ ISO 9001:2015 certified factory ✔ 12 months warranty — replacement parts shipped internationally ✔ Exported to 40+ countries – full documentation (packing list, EUR.1, certificate of origin, test reports) ✔ Trusted by: Coca-Cola | Unilever | Anadolu Efes | Limak Holding | OYAK | Cengiz İnşaat ✔ 20–35% more competitive than equivalent European pricing ✔ Production lead time: 3–5 weeks from drawing approval PRICING REFERENCE: Entry-level unit Ø114mm — from €1,500 EXW Ankara. All diameters, lengths, and configurations quoted within 24 hours. REQUEST A FREE QUOTE WITHIN 24 HOURS: Send us your required diameter, length, material type, and installation angle – we return a full technical offer and delivery schedule. Distributor and OEM partnerships welcome. Contact us to discuss exclusive regional agreements.

Condition: new, Year of construction: 2026, operating hours: 12 h, functionality: limited functionality, Ezystack Stockpiling Conveyor R6536 TR with tracked chassis, slewing via wheel drive. Equipment: Wired and radio remote control Weight: approx. 9,000 kg Transport dimensions: 12,036 x 2,350 x 2,519 mm (L x W x H) Drive motor / power: CAT 1.7 / 36 kW Discharge height: 7,952 mm Belt width: 900 mm Belt length: 18,530 mm Lrsdsyk S T Njpfx Aiyor

Condition: used, Manufacturer : Gericke Model : 150 BS Type: Rotary valve for pneumatic transport Direct connection to pneumatic transport pipes Hopper with level sensor: 20 litres Input/Output: Lrodsykcamepfx Aiyjr DN1 : Ø60 mm DN2 : Ø75 mm Bearing: air purge

Condition: used, Conveyor screws, auger, screw conveyor Ledpsyhblpjfx Aiysrr Heavy-duty design, suitable for large capacities. Dimensions: 1x Conveyor screw, diameter 470mm, L: 4000mm 1x Conveyor screw, diameter 320mm, L: 3800mm (excluding electric motor) 1x Conveyor screw, diameter 420mm, L: 3550mm 1x Conveyor screw, diameter 420mm, L: 4050mm Equipped with heavy-duty external bearings with shaft seals. Available for sale individually or as a lot. For more information, please contact us. See our other listings. VMA Wekerom

Condition: used, Flowveyor International Ltd aeromechanical conveyor Cable conveyor Suitable for conveying powders Tube diameter: 76.1 mm Conveyor made of stainless steel Ledpfxeyf Azte Aiyjrr Cable is made of food-grade plastic-coated cable Motor power: 1.5 kW Lifting height: 2350 mm (adjustable) See our other listings VMA Wekerom

Condition: used, Stainless steel rotating valve. Ljdsx Rz Rxspfx Aiyerr Diameter 250 mm. Motor 0,75 kW, IP 55.

Condition: reconditioned (used), Year of construction: 1989, functionality: fully functional, volume flow: 12.6 m³/h, overall weight: 200 kg, total length: 1,250 mm, total width: 415 mm, total height: 450 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 25 rpm, rotational speed (min.): 20 rpm, torque: 390 Nm, 2 units unused rotary valve dosing feeders. Both feeder valves have been completely overhauled. New bearings and seals have been installed. ! Price per unit ! Manufacturer: Kreisel Industries GmbH Model: ZS315-1 Inlet / Outlet size: 300 x 300 mm Housing material: Cast iron / Rotor: welded steel sheet Installation height: 450 mm Number of pockets: 7 Bearings can be lubricated from both sides externally. Pocket dimensions: Length 300 mm / Width 100 mm / Height 40 mm Weight: 200 kg per unit Gear motors are also unused stock items. Manufacturer: Thurm DDR Year of manufacture: 1990 Functionality has been tested! Feeder valve 1 Drive power: 0.75 kW Speed: 20 rpm Theoretical throughput: 10 m³/hour Feeder valve 2 Ljdjx N A N Tspfx Aiysrr Drive power: 1.1 kW Speed: 25 rpm Theoretical throughput: 12.6 m³/hour

Condition: used, Entecon conveyor flowveyor cable conveyor aerodynamic transport Lsdpfx Aisx Nymcsyorr Tube diameter: 76.1 mm Completely stainless steel Total length: 4300 mm In very good condition See our other listings VMA Wekerom

Condition: used, Stainless steel dosing screw, pipe screw, auger Lrjdpfx Asx Nykhsiysr Diameter: 150 mm Motor power: 1.1 kW, 148 rpm Entirely stainless steel See our other listings VMA Wekerom

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Ledpfx Asx Elkfoiyjrr Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Plexiglas enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), WSM SZ-250K Feeder The WSM SZ-250K is a feeder from WSM-Automation specifically designed for applications with high cleanliness requirements. The "k" in the model designation stands for "short" and refers to the reduced length of the sorting helix, which minimizes abrasion caused by fill level and vibrations. Function: This feeder combines the advantages of spiral feeders with the need for clean processes. Special Feature: The shortened sorting helix (effective length) is the key innovation for minimizing contamination from abrasion. Application: It is used where high cleanliness during feeding is required to ensure clean screw connections. Feeding unit SZ-250K consisting of: Lsdpfox Elfcex Aiyjrr Belt hopper BB-01-B (0.5 l) with level control and dirt barrier Coil conveyor WFL 200 IU (200 mm) with singulator Aluminum chassis with plexiglass enclosure Overall dimensions: H: 740 mm W: 700 mm D: 380 mm Screws: M 2.5 x 6 mm Voltage: 230 volts Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2022, operating hours: 200 h, functionality: fully functional, machine/vehicle number: C 2202067, Pallet Box Tipper 120x80x90 Allows you to empty the contents of a pallet box fitted with wooden extensions. A pneumatic cylinder system locks the pallet onto the tipper. Maximum pallet weight to be tipped: 1000 kg. This ROTOVID 135° box tipper, model RV135, is ideal for completely emptying the contents of your boxes. With a 135° rotation, it allows efficient rotation and emptying of your containers. Lodpfx Aexfg A Tjiyerr FEATURES OF THE ROTOVID 135° BOX TIPPER: - Rotation and return controls via hold-to-run push buttons - Side and rear safety guards - Electrically actuated check valves at cylinder exits - Floor fixing brackets - Receptacle size adaptable to your requirements - Fixed containment barrier - Customizable discharge height - Light curtains compliant with European standard ISO 13855 - Discharge chute - Fixed retaining bar - Discharge flap - HDPE coating - Protective grilles compliant with European standard ISO 13857 - Designed and manufactured in France

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Ljdpfx Aexd Dukjiyjrr Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Speed: 30.9 rpm

Condition: new, Year of construction: 2025, operating hours: 8 h, functionality: fully functional, conveyor belt width: 900 mm, conveyor belt length: 18,320 mm, discharge height: 8,320 mm, motor manufacturer: Caterpillar, Belt length / width: 18,320 / 900 mm Cat C1.7 engine: output 36 kW at 2,800 rpm Conveying capacity: approx. 400 t/h Discharge height: 8,320 mm at 22.5° incline Belt: hydraulically retractable and extendable Height adjustment: hydraulic Remote control: wired remote Crawler undercarriage length: 1,800 mm with 400 mm track plate Lrodpfx Aiow Hccnsyjr

Condition: used, 10-meter conveyor belt, width 0.55 m, inclination angle adjustable hydraulically. Lrodpfx Aiewz Nu Tsyor

Condition: good (used), Stainless steel pipe threaded screw conveyor screw auger Diameter 270mm Lrodpfx Aijwyf N Djysr Length 2400mm Motor power 2.2kW Entirely stainless steel See our other advertisements.

Condition: used, Dosing screw, screw conveyor, auxiliary feed screw Material: stainless steel Lrsdpfx Aijwyf Imjysr Motor power: 1.5kW 85rpm Inlet dimensions: 770x410mm Screw flight diameter: 220mm VMA Wekerom See our other listings