Evomax Oy

Condition: used, Year of construction: 2013, Technical details: x-travel: 3.600 mm y-travel: 1.100 mm z-travel: 900 mm table surface area: 4.200 x 1.100 mm control: iTNC 530 HSCI HEIDENHAIN turning speeds: 20 - 10.000 1/min Bledpfo Ahywwjx Ahdjp taper ISO: SK 50 rapid traverse: 40 m/min tool change unit: 120 Pos. spindle drive: 44 / 32 kW total power requirement: 77 kVA weight of the machine ca.: 31,5 t dimensions of the machine ca.: 7 x 3,5 x 3,2 m 5-axis-simultan universal machining-center, NC-swivelling milling-head (B-axis), rigid table with integrated NC-rotary table (left), dia. 1.050mm (max. table load 1.200kg), internal cooling device 40 bar, coolant 600l, paperfilter, chip conveyor, mode 4, el. handwheel, infrared touch probe TS 649, BLUM-Laser, prepared for 3D quickset (software), dividing wall, twin table machining, DMG netservice, mech. setting-up device for toolholders, oilmist suction, flush gun, incl. zero-point-clamping system (as seen on Fotos) machine with energy-saving ballscrews (X, Y, Z) ! approx. 47.000 machine on hours, 13.700 spindle hours *

Condition: good (used), Year of construction: 2021, Ref. -No.: 10630 Manufacturer: MATEC Type: HV 700 Year of construction: 2021 Type of control: CNC-Steuerung Control: Heidenhain TNC 640 Storage location: Halberstadt Blsdpfx Aho Ahmvmedsp Country of origin: Germany X-Travel: 2600 mm Y-Travel: 700 mm Z-Travel: 950 (horizontal) / 900 (vertikal) mm Swivel range: ± 105 ° Table speed range: max. 700 min/-1 Tool Taper: HSK-A63 Numbers Of Tools In Magazin: 50 Turning Speeds: 20 - 15.000 RPM Max. Torque: 195 (40 % ED) / 150 (100 % ED) Nm axes: 5 + Spindel Drive Capacity - Spindle Motor: 41 (40 % ED) / 31 (100 % ED) kW Operating hours: Steuerung ein 19.381 / Maschine ein 7.220 / Programmlauf 2.285 H Internal cooling: 20 / 40 bar Holding torque: 5.000 Nm NC rotary table: 2.000 kg Tabletop C-axis: NC-Rundtisch Ø 750 mm, im Maschinentisch eingelassen Further information: - NC swivel head, infinitely variable ± 105°, torque drive, swivel radius 250 mm - Motor spindle HSK-A63, 20 - 15,000 rpm, 41 kW (40 % duty cycle) / 31 kW (100 % duty cycle) - NC rotary table Ø 750 mm recessed into the machine table (torque drive, max. 700 rpm, indexing accuracy ± 2.5", max. load 2,000 kg) - Direct measuring system X, Y, Z axes (absolute) - 50 tool pockets - Internal coolant supply 20 bar and 40 bar with paper band filter (450 l) - Hydraulic motor spindle clamping for turning operations - Partition wall for pendulum (dual-station) machining - Automatic safety doors - 3D touch probe with radio transmission - Renishaw RTS tool setting probe with radio transmission (2 pcs) - Software option KinematicsOpt incl. calibration ball with holder - Dynamics package for free-form surfaces - Collision monitoring SETAC-ADVANCED - Electronic handwheel (portable) - Full work area enclosure with roof - Bellows with steel slats - Chip conveyor, special version for high-volume machining - Mechanical air filter CMC 1500 (2 pcs) - Cooling unit for electrical control cabinet - Flushing gun - Central oil lubrication - LED work area lighting - Installation elements The machine can be viewed under power by arrangement.

Condition: good (used), Year of construction: 2011, Ref. -No.: 10615 Manufacturer: DMG Type: DMU 210 P Year of construction: 2011 Type of control: CNC-Steuerung Control: Heidenhain ITNC 530 Storage location: Halberstadt Country of origin: Germany Machine-No.: 128/XXXX X-Travel: 1800 mm Y-Travel: 2100 mm Z-Travel: 1250 mm Swivel range: -30 / +180 ° Table Load: 10000 kg Max. rotary table diameter: 1700 O Table speed range: 12 min/-1 Tool Taper: HSK 63 Numbers Of Tools In Magazin: 60 Bledpfx Aho Ahmvfjdop Spindle Turning Speed - Stepless: 24.000 RPM Weight Of The Machine Ca.: 41 t Motor spindle: 24000 RPM Feed drive A, C: 30 min/-1 horizontal milling head: 130-1.380 mm vertical milling head: 230-1.480 mm Further information: The machine can be viewed while powered up.

Condition: used, Year of construction: 2005, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2005 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1150/710/710 mm Tool holder : SK40 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:28 kW Torque:121 Nm Taper:SK40 NC-Swivelhead: B-Axis:0,001° Swivelrange:-120°/+30° Blodpfx Ahe Ahl Hfsdsp NC-Roundtable: C-Axis:0,001° Clamping surface:ø800 mm In general: Toolmagazine:2x 16 stations Rapid travers in X/Y/Z:26/26/20 m/min Clamping surface static table:1.500 x 795 mm Table loading (max.):550 kg Equipment/Accessory: Position sensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and high-pressure, 40 bar Workpiecemeasurement:Infrared-Touchprobe, Heidenhain TS 641 Setup operations:Operation mode 4 Further Equipment:ROTO-Clear, Rinsing pistol Further Accessory:Misc. used Toolholder SK40

Condition: used, Year of construction: 2010, controller manufacturer: Heidenhain, controller model: iTNC 530, _____ Description: Year of manuf. : 2010 Control : Heidenhain iTNC 530 Speed : 12000 rpm Movement X/Y/Z : 1250/1000/1000 mm Tool holder : HSK-A63 Spindle: Technology:Motorspindle Speed:12.000 rpm Power:28 kW Bede Ahgg Tspfx Ahdjlp Torque:121 Nm Taper:HSK-A63 NC-Swivelhead: B-Axis:0,001° Swivelrange:-30°/+180° NC-Roundtable: C-Axis:0,001° Clamping surface:ø1.250 x 1.100 mm Tableloading (max.):2.500 kg In general: Toolmagazine:Chainmagazine, 120 Stations Rapid travers in X/Y/Z:60 m/min Equipment/Accessory: Positionsensor:Direct scales in all Axes Chipmanagement:Chip conveyor Coolingmanagement:Internal cooling unit with paperbeltfilter and Highpressure, 80 bar Workpiecemeasurement:Infrared-Touchprobe, Renishaw PP 60 Processobservation:Operation mode 4 Setup operation:Electronic handwheel Further Accessory:ROTO-Clear, Rinsing pistol

Condition: good (used), functionality: fully functional, Hermle C 52 U, Control system: Heidenhain TNC 640, Travel range X/Y/Z: 1000/1100/750 mm, 2-axis NC rotary table, High-pressure coolant system, 80 bar, 3D measuring probe, Blum Wz. laser measuring system, Spindle speed up to 18,000 rpm, HSK 63, 60-tool capacity, Additional tool magazine. Blodpfs Ag N I Rox Ahdjp

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho (DMG) DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Number of pallets: 2 Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Bjdpfx Aho Agvh Todslp Z-axis travel: 1000 mm A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: excellent (used), Year of construction: 2020, operating hours: 23,850 h, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, table width: 1,100 mm, table length: 4,200 mm, table load: 1,200 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 15,000 rpm, operating hours of spindle: 11,500 h, spindle nose: HSK-A 63, number of slots in tool magazine: 120, Equipment: chip conveyor, CNC Bed-Type Milling Machine - Universal Manufacturer: DMG MORI Type: DMF 360-11 Year of manufacture: 2020 Control system: Celos with Siemens 840D sl Operate Technical Data Travel ranges: X-axis: 3,600 mm Y-axis: 1,100 mm Z-axis: 900 mm Main spindle: Speed ​​range - main spindle: 20 – 15,000 rpm Drive power - main spindle (100/40%): 46 / 30 kW Torque: 200 / 130 Nm Work table: Table clamping surface: 4,200 x 1,100 mm Rotary table: dia. 1,050 mm Max. table load: 1,200 kg Tool changer: Number of tool positions: 120 pos. Tool holder: HSK-A 63 Feed rates: Bledpfx Ao Agr Inohdop Rapid traverse (X/Y/Z): 40 / 40 / 40 m/min Operating hours: approx. 23,850 h Spindle hours: approx. 11,500 h Technical features & accessories: - 5-axis simultaneous machining - NC swiveling milling head (B-axis) - Integrated rotary table, left-hand arrangement, hydraulically clamped - Full enclosure - Coolant tank - Direct measuring systems - Scraper-type chip conveyor - Internal coolant supply (ICS) 40 bar, includes: - Paper belt filter, 600 l - 2 rotating viewing windows - Air purge for linear measuring systems - Rotary union for spindle - Flush gun for... Chip flushing - 2x oil and emulsion mist extraction units - Air blast through spindle center - Infrared touch probe, Heidenhain TS 460 (if present) - Preparation for 3D quickSET - MPC – Machine Protection Control - Operating Mode 4 - ATC (Application Tuning Cycle) - Preparation for Hofmann RW-NC 300 rotary table (rotary table not included) - Pendulum operation - Tool breakage detection TRS2 - Tracyl cylindrical surface interpolation Accessories, tools, and workholding devices shown are included in the scope of delivery only if this is noted in the additional information. Unless otherwise agreed, sales between B&B customers are always made without warranty.

Condition: refurbished (used), Year of construction: 1997, travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,250 mm, controller model: Siemens 840 C, spindle speed (max.): 4,000 rpm, The machine has been completely overhauled! Bedpfx Aho Agftbjdelp TECHNICAL DETAILS Travel range, X-axis: 1,500 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,250 mm Speed range: 10–4,000 rpm Spindle power: 40 kW Spindle interface: HSK-A 100 Pallet size: 1,000 × 1,000 mm Pallet speed: 1–500 rpm Pallet load: max. 2,000 kg Tool magazine: Chain magazine Tool positions: 161 MACHINE DETAILS Control system: Siemens 840 C Overall dimensions: 8,500 × 4,800 × 4,800 mm EQUIPMENT Pallet changer Horizontal and vertical automatic head Rotary table Chip conveyor Paper filter

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, table load: 2,000 kg, overall weight: 24,000 kg, spindle speed (max.): 8,000 rpm, number of slots in tool magazine: 60, Completely overhauled by DMG in 2011. Tool holder: SK50 with tool storage for 60 tools. IKZ (internal coolant supply). Max. spindle speed: 8,000 rpm. 30 kW spindle with swiveling milling head (B-axis). Bedpfx Ahj Agaznodelp Infrared measuring probe. NC rotary table with pallet changer.

Condition: like new (used), Year of construction: 2021, operating hours: 5,100 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,175 mm, controller model: Heidenhain 640 control, overall weight: 37,500 kg, spindle speed (max.): 30,000 rpm, operating hours of spindle: 5,100 h, coolant supply: 80 bar, spindle nose: HSK-A63, number of spindles: 1, number of slots in tool magazine: 120, We offer in good condition Grob G750 Gen1 from 2021 with only 5100 spindle hours. X-Axis travel: 1000 mm Y-Axis travel: 1100 mm Z-Axis travel: 1175 mm With following options: HSK-A63 120 tools ATC 30.000 RPM Spindle Internal coolant 80 bar Touchprobe Heidenhain TS460 Blodps Af Uxuefx Ahdep Blum Laser Kinematic quick set including LANG Vices

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty Bods Af Ultspfx Ahdolp • Short delivery time, subject to prior sale

Condition: reconditioned (used), Year of construction: 2014, Immediately available: Traveling column machine FS 1200 • Total travel X=12,000 mm, ideal for flexible large-scale machining • Travel X=12,000 mm, Y=1,500 mm; Z=3500mm • Control iTNC 530 with wireless radio handwheel HR 550 FS, operator cabin on the traveling column • 2-axis NC universal drilling, milling head, fully simultaneous and positioning operation per traveling column • Spindle HSK-A 100, 10,000 rpm, 220 Nm spindle torque • IKZ air up to 6 bar • Dust protection packages to protect the guides and drives Bledpfx Ahe Af Ugrodop • BA 4 per traveling column • Radio measuring probe RMP 60, Renishaw make • Work area monitoring with network camera and monitor on the back of the system • Process monitoring ToolScope basic system • Additional control panel on the back of the system • Partial housing consisting of work area and sheet metal door, back with protective fence with a clear view into the work area • incl. fixators • Cooling units • incl. internal tool cooling (closed cooling circuit) with Cooling unit • short delivery time, available immediately, ---subject to prior sale--- Viewing possible by arrangement Spindle hours: approx. 9079 SPECIAL PRICE!

Condition: good (used), Year of construction: 1999, Universal machining center Machine type: DMG DMU 200 P Control: Heidenhain TNC 430 M Year: 1999 SPECIFICATIONS Travel X-Axis: 1.800 mm Y-Axis: 2.000 mm Z-Axis: 1.100 mm C-Axis: 360° Panning head: H/V B-Axes: 0 oder 90° Rapid motion: (X/Y/Z): 60 / 40 / 40 m/min. Amount of controlled axes: 4,5 Spindle speeds: 8.000 rpm Spindle power: 30 / 20 kW Torque: 285 Nm Tool: SK 50 Toolchanger Tool capacity: 60 Tool diameter: 230 mm Tool lenght: 450 mm Max. tool weight: 20 kg NC rotary table Table size: 1.700 x 1.400 mm Bodpfx Ahj Afm D Ijdolp Max. Table Load: 5.000 kg Machine weight: 33.000 kg Equipment Chip conveyor Electronical handwheel Caliper: Heidenhain TS 631 Internal cooling: bar

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 1502/2, total height: 2,200 mm, total length: 2,500 mm, total width: 3,600 mm, table width: 600 mm, table length: 1,000 mm, overall weight: 6,000 kg, distance table to spindle center: 400 mm, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, FAMU FAS-2M vertical CNC machining center, year 1995, with HEIDENHAIN control. Machine complete with enclosures and operator console (as shown in the photos). Blsdpo Ad Uyhofx Ahdep Table: 1000 × 600 mm Table-to-spindle nose distance: 400 mm (in current position) Machine footprint: 2500 × 3600 × 2200 mm Sold as is.

Condition: as good as new (ex-display), Year of construction: 2025, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 1,400 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, workpiece weight (max.): 6,000 kg, rotational speed (max.): 10,000 rpm, tool length: 800 mm, New machine HDC3000 with 6 axes • Travel ranges: X=3000 mm, Y=1500 mm, Z=1400 mm • Heidenhain iTNC 640 with handwheel • NC rotary table for 5-sided machining 1250 mm x 1600 mm • 2-axis NC universal drilling and milling head, fully simultaneous and positioning operation • Spindle 10,000 rpm HSK100, S1=220 Nm spindle torque • Tool change system HSK100 / 60 stations – 800 mm tool length • Chip conveyor • Optimized for 5-sided machining including deep hole drilling • Coolant supply system • Internal/external air blow-off device Blsdpfo Adq Uujx Ahdop • ICS 60 bar for deep hole machining • Fully enclosed • Large interference circle 2300 mm • Including mounts • Including wash gun • Including warranty • Short delivery time, subject to prior sale

Condition: excellent (used), Year of construction: 1999, Control system: Heidenhain TNC 426 Travel ranges X/Y/Z: 1250 x 880 x 800 mm Spindle speed: 8,000 rpm Bjdo Admbdopfx Ahdslp Tool magazine for 60 tools, SK 50 Universal milling head +0° / -90° indexing NC rotary table 1250 x 1000 mm Chip conveyor Measuring probe

Condition: used, Year of construction: 2001, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 900 mm, controller manufacturer: Heidenhain, controller model: TNC 426 M, overall weight: 11,200 kg, spindle speed (max.): 15,000 rpm, spindle nose: HSK-A 63, number of slots in tool magazine: 45, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350 Year of manufacture: 2001 Control: HEIDENHAIN TNC 426 M Technical details: Bledo Adfq Djpfx Ahdsp X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 900 mm C-axis: 360° A-axis: ° Spindle speed: 15,000 rpm Tool holder: HSK-A 63 Number of tool positions: 45 Machine weight approx.: 11,200 kg Condition: Used Technical features & accessories: - Chip conveyor - Belt filter system - Air filter Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: ready for operation (used), Year of construction: 1998, Available for immediate pickup at our location: Vertical machining center ZPS Depo Type MCTV 1060 NT Year of manufacture 1998 Heidenhain iTNC 426 M Table 1270 x 590 mm Travel distances X/Y/Z 1016/610/760 mm SK 50 Spindle speeds up to 8000 rpm Table load max. 900 kg Drive power 11 kW Tool changer, 24 positions Distance spindle – table 80 – 840 mm Bedpfe Aa Irvox Ahdolp Weight 6700 kg Price: Euro 4,000.00 plus VAT, pickup at our location.

Condition: used, Year of construction: 2002, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 700 mm, controller manufacturer: Heidenhain, controller model: TNC 426 M, overall weight: 11,200 kg, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 50, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350-3 Year of manufacture: 2002 Control: HEIDENHAIN TNC 426 M Technical Details X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 700 mm C-axis: 360° A-axis: ° Spindle speed: 15,000 rpm Number of tool positions: 50 Machine weight approx.: 11,200 kg Condition: Used Technical Features & Accessories: - Compact belt filter system - Chip conveyor - Air filtration system Bedpj Aa A R Hofx Ahdjlp Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to modifications and errors in the technical data and specifications; prior sale reserved!

Condition: refurbished (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 14,000 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 1,000 mm, feed length Z-axis: 14,000 mm, feed rate X-axis: 5,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,400 m/min, nominal power (apparent): 22 kVA, controller manufacturer: Heidenhain, workpiece length (max.): 5,000 mm, workpiece width (max.): 1,000 mm, workpiece height (max.): 1,400 mm, workpiece diameter (max.): 1,000 mm, workpiece weight (max.): 10,500 kg, table width: 1,000 mm, table length: 5,000 mm, table load: 10,500 kg, rotational speed (min.): 2,500 rpm, rotational speed (max.): 2,500 rpm, spindle speed (min.): 2,500 rpm, spindle speed (max.): 2,500 rpm, spindle nose: ISO 50, number of spindles: 1, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, Technical specifications Table clamping width 1000 mm Table clamping length 5000 mm Working feed range 1 - 5000 mm/min Speed range 11 - 2500 rpm Spindle taper ISO 50 X-axis 5000 mm Y-axis 1000 mm Blodj Aazqfjpfx Ahdop Z-axis 1,400 mm Main motor power 22 kW Max. workpiece weight 10,500 kg

Condition: used, Year of construction: 2004, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, controller manufacturer: Heidenhain, controller model: iTNC 530, workpiece height (max.): 1,100 mm, workpiece diameter (max.): 1,950 mm, workpiece weight (max.): 3,500 kg, total height: 4,375 mm, total length: 12,300 mm, total width: 11,200 mm, table width: 1,400 mm, table length: 1,600 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 28 W, number of spindles: 1, number of slots in tool magazine: 120, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho DMC 200U from 2004 with the Heidenhain iTNC 530 control. Technical specifications: Table dimensions: 1600x1400mm Number of pallets: 2 Max. workpiece dimensions: 1950x1100 mm Max. workpiece weight: 3500 kg X-axis travel: 1800 mm Y-axis travel: 2000 mm Z-axis travel: 1100 mm B-axis (swivel of the head): -7/+187 ° C-axis (work table rotation): 360° Bsdpfxjz Tqykj Ahdjlp Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 120 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you.

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 86966, travel distance X-axis: 2,600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, total height: 3,850 mm, total length: 8,350 mm, total width: 4,200 mm, overall weight: 35,000 kg, spindle speed (min.): 30 rpm, spindle speed (max.): 4,000 rpm, spindle motor power: 57 W, spindle nose: SK50, number of slots in tool magazine: 30, Equipment: chip conveyor, documentation/manual, For sale is an AXA VHC50-2600 XTS, including a KUKA robotic system with conveyor belts (partial sale possible). Bljdpsz S T Rcefx Ahdep An spare parts package worth approximately €180,000 is also included. The price is including delivery to your location – within Germany. For more detailed technical specifications, please see the attached documents. An inspection can be arranged at any time. Installation and recommissioning can also be organized.

Condition: used, Year of construction: 2000, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel distances X-axis travel: 1,200 mm Y-axis travel: 620 mm Z-axis travel: 520 mm Control system CNC control: Heidenhain TNC 410 Work table Table size: 1,550 × 600 mm Design: continuous table for longer workpieces Tandem operation: possible with a dividing screen Feed rate and rapid traverse Feed rate range: 1–30,000 mm/min Rapid traverse: 45 m/min Spindle and tool holder Spindle speed: 40–8,000 rpm Tool holder: ISO 40 Tool changer Blodpfx Asz S Nizshdsp Tool changer: 30 positions Performance data Total power consumption: 20 kVA Machine weight: approx. 9 tons Dimensions Space requirement: approx. 4.2 × 2.3 × 2.7 m EQUIPMENT Continuous work table Dividing screen for tandem operation 3 additional clamping tables Tool changer with 30 positions Heidenhain TNC 410 CNC control

Condition: used, Year of construction: 2002, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 870 mm, torque: 191 Nm, controller manufacturer: Heidenhain, controller model: TNC 426 M, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle nose: HSK-A63, number of slots in tool magazine: 46, tool length: 300 mm, tool weight: 8,000 g, Equipment: chip conveyor, Universal Machining Center Manufacturer: MIKRON Type: UCP 1350 Year of manufacture: 2002 Control: Heidenhain TNC 426 M Technical details: X-travel: 1,350 mm Y-travel: 1,150 mm Z-travel: 870 mm Feed rate (X / Y / Z): 0 – 10,000 mm/min NC rotary table: 1,100 x 1,000 mm Table load: 1,500 kg T-slots (quantity x width x spacing): 8 x 18 H12, 1 x 18 H7 x 1 mm Spindle speed: 12,000 rpm Drive power – main spindle (100%/40% duty cycle): 20/24 kW Torque: 191 Nm Tool holder: HSK-A63 Number of tool positions: 46 Bljdpfx Asz St Syohdop Max. tool diameter: 80/130 mm Max. tool length: 300 mm Max. tool weight: 8 kg Max. magazine load: 200 kg Condition: Used Technical features & accessories: - Cooling unit: MTA TAEEVO015 - Belt filter - Chip conveyor Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!