N. Dimou & Sia Oe

Condition: reconditioned (used), functionality: fully functional, Electrode dryer, for 2 electrode packs, with thermostat. Voltage: 230V Temperature: approx. 300 degrees Knodpez D D U Uofx Afdsb Weight: 14 kg

Year of construction: 1998, condition: used, Tool travel: 250 mm Distance between column and tool holder: 425 mm Kedsz Dv Slopfx Afdsnb Distance between table and column top: 520 mm Saddle travel: 430 mm Table dimensions: 340 x 560 mm Table travel: 350 mm Number of strokes: 16-60 AUTOMATIC RETURN

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15, total width: 2,210 mm, total length: 2,333 mm, total height: 2,200 mm, overall weight: 700 kg, type of input current: three-phase, input voltage: 400 V, The DCSF-135 2W brush sanding machine features a welded frame, housing two independently moving frames. Each frame supports two sanding spindles, constructed from cylindrical base segments with grooves for inserting brushes made of soft abrasive cloth and agave fibers. These spindles can swivel up to 15°. The spindles are driven by electric motors via gear elements. The sanding rollers are belt-driven, with their rotational speed regulated by frequency inverters. The sanding units are suspended in pairs on independent lifting systems. The lifting system consists of four trapezoidal screws, driven by a geared motor via a chain drive. Each spindle is equipped with a separate dust extraction unit that effectively captures dust generated during sanding. A conveyor table with a rubber belt is mounted on four supports below the sanding spindles, and includes a feed mechanism. The conveyor table is a vacuum table. The vacuum chamber of the table is connected to a radial fan located underneath the table via two flexible hoses. At the rear of the machine, a turbo blower is located to clean the workpiece after the sanding process. All electrical components are installed in a separate control cabinet at the front of the machine, with the operator panel located on the left-hand door. The DCSF135 2W wide-belt sanding machine can be adapted for use in a production line. Machines designed for this purpose are equipped with operator panels angled towards the conveyor belt feed direction, allowing operation during continuous processing or when the table is long from the infeed side. The rubber rollers on the table, located near the geared motor, are driven by elastomer belts. When the machine operates in a 1+1 line (two machines in series), it can be equipped with an infeed/outfeed conveyor with its own drive (MRT 50 geared motor, i=15, n=93 with an 800 mm conveyor length*). Power is transmitted from the geared motor to the rubber rollers via round elastomer belts. The length of the infeed/outfeed conveyor depends on the customer's individual needs. Technical parameters: Sanding roller with brush strips made of agave fiber (FLEX TIM) Ø290-380 x 1400 - 2 pcs Brush rotational speed 100-450 rpm Roller drive motor Sg90L-4PC 2.2 kW, 1380 rpm - 2 pcs Sanding width 1350 mm Conveyor belt CANTACT E2112 Kreisloch 57oSh;, 1350x4424, VACUUM CONTITECH (according to SSZ.00.01-135) Knodsz Duicopfx Afdjb Feed rate 3-20 m/min Conveyor drive motor Skg100L-4A 3 kW, 1415 rpm Conveyor gearbox MRT-85 i=20 n-70 Geared motor (infeed/outfeed conveyor)* MRT-50 i=15 n=93, power 0.75 kW* Lifting drive motor Skg100L-4A 0.55kW, 1390 rpm - 2 pcs Lifting gearbox MRT-60 i=56 n=25 Fan motor SKg 132S2A 5.5 kW n= 2925 rpm Diameter of dust extraction ducts for sanding units 1 x Ø250mm Diameter of dust extraction duct for turbo blower x Ø120mm Air requirement for brushes 2x 4000 m³/h Air requirement for turbo blower 500 m³/h Supply voltage 3 x 400 V in TN-S system Installed power (without infeed/outfeed conveyor) - 13.45 kW

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. Ksdjz Dtmaspfx Afdenb If you have any questions or need further information, please do not hesitate to send us a message or call us.

Year of construction: 2026, condition: new, chip extractor for aluminum machining Ksdpfx Afoz Dp Hpjdonb

Condition: used, A fully operational metal processing company is for sale, complete with all production equipment, a customer base, and ongoing orders. This is more than just a sale of equipment – it’s the transfer of a thriving business with a current workforce of 6 employees. Production is uninterrupted; the company fulfills existing orders, operates on a subcontracting basis, and has secured future contracts through won tenders. The company boasts a modern equipment park, mostly from 2024-2026, allowing it to perform the entire main cycle of sheet metal processing: laser cutting of sheets and tubes, bending, laser and conventional welding, grinding, and other metal processing operations. Production Facilities The premises are rented under favorable terms: Production space: approximately 400 + 600 m² An additional second floor is available, offering approximately 800 m² for further expansion Overhead cranes are installed in the premises Low rental cost Main Production Equipment 2026 HN-6020 Sheet Metal Laser Cutting Machine Laser power: 12 kW Kedpfx Afsz A Rwaodonb Working format: 6000 × 1500 mm Metal thickness to be cut: up to 10 mm 2025 Hongnili Tube Laser Cutting Machine Raycus laser source Laser power: 3 kW Tube length: up to 6 m Wall thickness to be cut: up to 10 mm 2025 LEMANS B320/4 Bending Press Equipped with bending press tooling 2024 Hongniu HN-3000W Laser Welding Machine Power: 3000 W Other Production Equipment Automatic grinding machines for parts after laser cutting Bevel grinding machine Band saw Welding machines Various production tools and auxiliary equipment A significant stock of sheet metal is available in the warehouse Transportation and Handling Equipment Electric Jungheinrich forklift Diesel Linde forklift Volkswagen Crafter cargo van Included with the company: The entire operational company is for sale, including production equipment, an existing customer base, ongoing projects and orders, won tenders, subcontracting activities, a team of 6 employees, metal stock, transportation, and other equipment and tools necessary for production. This is an opportunity to take over an already functioning metal processing company and continue production immediately, without the need to build a production base and assemble equipment from scratch. We will provide more information about the company, equipment, and sale conditions upon request. The company and the operational production can be viewed in advance by appointment. I have not specifically mentioned the company name, location, and sale price here – it is quite logical in this type of advertisement to reveal some information only to a serious buyer. Once we have the exact names/models of the laser manufacturers and the parameters of the LEMANS press, we can further refine the technical details.

Year of construction: 2011, operating hours: 8,350 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: WJ2010-1Z-SJ-S Smart Jet Strong, PTV Waterjet WJ2010-1Z-SJ-S Smart Jet Strong for sale For sale: PTV WJ2010-1Z-SJ-S Smart Jet Strong waterjet cutting machine. Professional CNC waterjet from PTV for the precise cutting of various materials. Thanks to waterjet cutting, materials can be processed without heat input, eliminating material deformation. This machine was used in our production process and is being offered for sale due to the termination of our business operations. Machine specifications: Brand: PTV Type: WJ2010-1Z-SJ-S Model: Smart Jet Strong CNC-controlled waterjet cutting machine Working area: cutting bed 2400x1000mm Year of construction: 2011 Operating hours: 8350 High-pressure pump: 4000 bar Includes: software / abrasive system / pump / water treatment / etc. The waterjet is suitable for cutting various materials and material thicknesses, making it a versatile machine for industrial production and custom work. The machine is currently still installed and can be inspected in working order by appointment. If you are seriously interested, please do not hesitate to contact us. Additional photos, videos, and technical data are available upon request. Ksdpfx Afez A Aa Hodonb

Condition: refurbished (used), functionality: fully functional, overall weight: 1,150 kg, total length: 1,680 mm, total width: 1,250 mm, total height: 1,390 mm, Year of construction: 2008, operating hours: 882 h, input frequency: 50 Hz, shaft diameter: 105 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile bending machine PBT25 PC400 (will be refurbished, including a new Y-axis measuring device) For sale is a profile bending machine PBT25 with PC300 control, manufactured in 2008. The machine will be completely refurbished and technically inspected by PBT before sale. Knjdpsz Ak I Iofx Afdjb Technical data: Machine type: Profile bending machine Manufacturer / Model: PBT25 Control: PC300 (upgrade in 2026) Year of manufacture: 2008 Operating hours: approx. 882 hours Condition: Good condition. Fully functional. Availability: Approximately two weeks. Further technical details and specifications according to the manufacturer can be found on pbt-ag.com.

Condition: new, Year of construction: 2026, CORMAK SGDCW1000 Industrial Dust Extraction Unit with a Wet (Water) Filter The CORMAK SGDCW1000 industrial dust extraction unit with a wet (water) filter is an advanced device specially designed to work with deburring machines and grinding stations. It is perfectly suited for the safe extraction of dust with an increased risk of ignition and explosion – in particular aluminium dust, as well as during the processing of stainless and mild steel. By immersing contaminated air in water, it effectively neutralizes fire hazards during production processes. Main Advantages and Characteristics of the Device Fire safety: Wet separation of metal dust (aluminium, magnesium) significantly reduces the risk of explosions and ignition of sparks in the deburring machine's extraction system. High filtration efficiency: The extracted air passes through a water tank, where microscopic dust particles are permanently trapped in the tank. Heat recovery: After the cleaning process, the air reaches optimum humidity (approx. 60%) and can be safely returned to the production hall. Durable and robust construction: The device is made of high-quality corrosion-resistant materials and designed for continuous operation under demanding industrial conditions. Easy maintenance: Easy access to the filtration area and water tank facilitates daily cleaning and servicing. Technical Specifications Motor power — 7.5 kW Maximum capacity — 3000 m³/h (at 20°C and a medium density of 1.2 kg/m³) Fan rotational speed — 2900 rpm Maximum pressure — 4600 Pa Weight — 450 kg Filters — Mesh, 2 × 750 × 810 mm Suction inlets — 2 × Ø200 mm Fan outlet flange — Ø180 / Ø225 mm Overall dimensions (W × D × H) — 1400 × 850 × 2170 mm Construction and Standard Equipment The construction of the wet separator has been optimized for perfect cooperation with modern deburring machines and finishing machines. The standard equipment includes: An efficient industrial fan with a high rotational speed, designed to generate high negative pressure. Knodpfez Ahurox Afdjb Two advanced mesh filters with dimensions of 750 × 810 mm. A spacious water tank with a drain for water replacement. Ergonomic inspection panels providing continuous visibility of the filtration process. A safe electrical system adapted to stringent industrial standards.

Year of construction: 2021, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC S7-1500, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 3, This 3-axis clean CELL 3220 was manufactured in 2021. It features a powerful 600 W diode-pumped solid-state laser with a wavelength of 1064 nm and an integrated water-to-water cooling system. The machine is equipped with a Siemens control unit and a robust ABB robot for enhanced automation. If you are looking to get high-quality laser cleaning capabilities, consider the Clean Laser clean CELL 3220 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Laser Source: cleanLASER CL600 Mid-Power Laser • Laser Type: Diode-Pumped Solid-State Laser (DPSSL) • Laser Wavelength: 1064 nm • Laser Operation Mode: Pulsed (ns) • Average Laser Power: 600 W ±5% • Alignment Laser Wavelength: 658 nm • Alignment Laser Power: 28 mW • Cooling System: Integrated Water-to-Water Cooling System • Additional Chiller: Cooler ONE Plus Air (Air-Cooled) • Fiber Cable Type: Quartz Fiber Optic Cable • Fiber Length: 10 m • Fiber Geometry: Square • Protective Hose Diameter: 21 mm • Optical System: STAMP 25 2D Optics • Optics Connection: 90° • Focal Length: 163 mm • Control Unit Brand: Siemens • Control Unit Model: SIMATIC S7-1500 PLC • Drive System: Siemens 1FK7 Servo Drives • Linear Axis System: 3-Axis Portal System • Maximum Axis Payload: Approx. 25 kg • Axis Speed (X/Y): >200 mm/s • Communication Interface: Profinet • Digital I/O: Standard • Software: cleanSTUDIO / cleanCONTROL • Industrial PC: 19" Rack PC • SSD Capacity: 256 GB • RAM: 8 GB • Processor: Intel Core i5 (minimum) or equivalent • Robot: ABB Robot • Gripper: 2-Workpiece Gripper • Conveyor System: Bosch TS2 Transfer System • Loading System: Manual Workpiece Carrier Loading • Discharge Conveyor Length: Approx. 4.8 m • Extraction System: ULT Maxi Plus • Fan Capacity: Max. 4,000 m³/h • Maximum Pressure: 3,300 Pa • Filter Cartridges: 4 × 600 mm • Dust Drum Capacity: 200 L • Extraction Power: 5 kW Kodpfx Aez Ahccsfdsnb • Power Supply: 400 V, 3-PhaseAdditional photos are available upon request.

Year of construction: 2019, condition: ready for operation (used), controller manufacturer: SIEMENS, controller model: SIMATIC HMI, total width: 2,035 mm, total height: 2,215 mm, product length (max.): 2,200 mm, number of axes: 6, This 6-axis CleanLASER cleanCELL 3220 CL600 was manufactured in 2019. It features a powerful 600 W Q-switched fiber laser, designed for automated laser cleaning and surface treatment of metal components. The system includes a 6-axis industrial robot and a fully aligned beam path for precision cleaning. If you are looking to get high-quality automated laser cleaning capabilities, consider the CleanLASER cleanCELL 3220 CL600 machine we have for sale. Contact us for further details. • Machine Type: Automated Robotic Laser Cleaning Cell • Application: Automated Laser Cleaning / Surface Treatment of Metal Components • Laser Source: cleanLASER CL600 • Laser Type: Q-switched Fiber Laser • Average Laser Power: 600 W • Wavelength: 1064 nm • Laser Class: Class 4 (Laser Source) • Complete System Classification: Laser Class 1 • Laser Optics: STAMP 25 • Scanner Type: 2D Scanner • Working Scan Field: Approx. 65 × 65 mm • Objective Lens: f = 163 mm • Red Positioning Laser: Yes • Pulse Frequency: Variable • Beam Delivery: Fully Aligned Beam Path • External Fiber Length: Approx. 8 m • Door Interlock Connection: Yes Ksdpfx Asz Aha Iofdjnb • Remote Diagnostics: TCP/IP / USB • Fieldbus Interface: Profinet • Software: cleanSTUDIO • Telediagnostic Software: CLL Remote Diagnostics • Robot Type: 6-Axis Industrial Robot • Robot Programming: Teach Mode • Robot Gripper: Single Part Gripper • Loading System: Manual Loading • Conveyor System: Bosch T2 Carrier System • Buffer System: Multiple Workpiece Carriers • Unloading: Automatic Conveyor • Conveyor Length: Approx. 2 m • Workpiece Carrier: Not Included • Designed Workpiece Types: 2 • Machine Footprint (W × D × H): Approx. 2,035 × 2,200 × 2,215 mm • Machine Frame: Welded Steel Base Frame • Cell Construction: Aluminium Profiles • Work Table: Aluminium T-Slot Plate • Front Door: Folding Door • Electrical Cabinet: Integrated Double Cabinet • Cabinet Width: 1,200 mm • Cabinet Depth: 800 mm • Cooling Requirement: External Water Cooling (

Year of construction: 2001, condition: excellent (used), functionality: fully functional, CNC mandrel bending machine including O-ring assembly Fully automatic, high-precision production cell for the series production of pipework systems (e.g. brake, fuel or hydraulic lines), including a robot, feeding system, dual O-ring assembly and high-quality testing technology. The system combines the legendary precision of a MIIC CNC bending machine with the flexibility of robot-assisted handling and integrated quality assurance. The system is ideal for suppliers to the automotive industry, mechanical engineering or fluid technology sectors. Technical data 1. CNC mandrel bending machine Manufacturer: MIIC (Chubu MIIC Co., Ltd., Japan) Type: EMO-20R-S Year of manufacture: 2001 Control system: Multi-axis CNC control with operator panel Special features: Collet head movable in X / Y / Z, equipped with 3 bending planes for highly complex three-dimensional shapes without tool changes. 2. Loading and unloading robot Manufacturer: Motoman (Yaskawa) Model: ERCS-UP6-A00 Kjdpfxozz Hmqs Afdsnb Year of manufacture: 2000 Robot control: XRC including original teach-in terminal (handheld control unit) 3. Automatic O-ring assembly stations Manufacturer: ASM HASEMO GmbH Type: MOSA-800 / MOSA-1100 Year of manufacture: 2010 (high-quality upgrade/retrofit) Function: 2 O-ring assembly stations including a complete bulk material feed system (vibration hoppers/spiral conveyors) for twist-free and gentle external assembly of sealing rings. 4. Quality assurance & peripherals Measuring computer / leak tester: Innomatec, type: LT-C602 (for direct in-line testing) Blow-off station: Integrated for cleaning

Condition: used, Footprint: approx. 6000 x 7000 x 6850 mm Knedpfezz Hl Tsx Afdjb Includes broach(es); not all are present. Rated force: 25 tons Peak force: 37 tons Stroke: 66" / approx. 1,676 mm Cutting speed: 0–33 ft/min Return speed: 0–60 ft/min Equipment: retraction unit Table: sliding table, 3 stations

Condition: good (used), workbench, work table, assembly bench -Width: 1530 mm Kjdpfxezzqqgs Afdjnb -Depth: 800 mm -Height: 860 mm -Weight: 110 kg

Year of construction: 2003, condition: ready for operation (used), This machine tool was manufactured in 2003. The Dürr Universal 71C features a comprehensive setup including a work tank, flood tank, continuous distillation, and an automatic sliding door. It also boasts a vacuum unit for drying, a condensate tank, and a drying cooler. Optional equipment like a control panel and ultrasound enhances its versatility. A great opportunity to buy this Dürr Universal 71C machine tool. For more information about this machine tool, please reach out to us. Additional equipment • Scaffolding with cladding • Work tank // Flood tank 1 // Condensate tank // Flood tank 2 • Continuous distillation • Automatic sliding door • Water separator • Bogie without cover • Storage with drive • Drying cooler • Vacuum unit - drying process // Vacuum unit // Vacuum filling/emptying device • HD - IFW Circulation filtration including chip rinsing • 6 baskets included Machine Benefits Knsdpfxozzn Hxs Afdob Technical Machine Benefits • Control panel • Ultrasound (1 rod transducer) • Heating fb2 • Hgz 028 cooling unit • Reinforced cooling (hgz 064 cooling unit and cooling coils in fb1, fb2, desti. ) • Filling/emptying device for fb2 • Dummy for fb2 • Preservation equipment • Single filter for fb1 // filtration for fb2 • Automatic feeding Extra Information Machine still under power

Year of construction: 2020, condition: used, Bar length: 3000mm, max. bar diameter: 80mm, operating cycle: fully automatic, monitoring and fault diagnostics: via display, part length: presettable, feed control: AC servo motor, bar diameter: adjustable via PLC keypad in 1mm increments, remnant extraction: to the rear or ejection to the front, guide channels: Vulkollan plastic, usable magazine width: approx. 900mm, control: integrated PLC, weight: approx. 2500kg. Documentation available. An on-site inspection is possible. Knsdpfx Afszzdyhjdeb

Year of construction: 2023, operating hours: 1,008 h, condition: ready for operation (used), Machine tool manufactured in 2023. This ECOKRAFT LP 22 features a power rating of 22.5 kW and a material bunker capacity of 4 m³. It includes a drum screen with dimensions of Ø 300 mm x Length 1,200 mm and a conveyor belt with a length of 3,600 mm. If you are looking to get high-quality processing capabilities, consider the ECOKRAFT LP 22 machine we have for sale. Contact us for further details. Knodpfxszza Axj Afdob - Machine Type: Pellet Plant / Pellet Press Line- Power Rating (Cutting Mill): 22.5 kW- Material Bunker Capacity: 4 m³ (with discharge)- Material Container Automatic Operation Capacity: 4 m³ (discharge via conveyor belt)- Operating Hours (from HMI readout):- Power On Time: 3795 h- Total Press Run Time: 1008 h- Current Press Run Time: 1008 h- Removal Conveyor: 1158 h- Screening System: 1158 h- Water Pump: 609 h- Bunker Conveyor: 259 h- Bunker Discharge: 230 h- Bunker Agitator: 201 h- Cross Conveyor: 0 h- Drum Screen Dimensions: Ø 300 mm x Length 1,200 mm- Drum Screen Discharge Height: Max. 1,800 mm (variable height adjustment, side filling right/left)- Conveyor Belt Specifications: Length 3,600 mm, Discharge Height 2,600 mm, Belt Width 150 mm, Number of Cleats: 49, Motor Speed 46 rpm- Big-Bag Frame Vario 1.0: Suitable for size 95x95x100 cm (1.0 m³)- Big-Bag Frame Vario 1.5: Suitable for size 95x95x150 cm (1.5 m³)- Optional Equipment & Features:- Pellet Press LP22- Load-dependent feed control- Rotary valve- Frost-proof control panel with touchscreen interface- Remote maintenance and fault analysis module- SMS module- Temperature monitoring and control for press room- Manual potentiometer for material flow regulation- Pressol pneumatic grease system (for 18 kg bucket)- Control cabinet with VFD for LP22 connection- Cable set for automatic operation- Level sensor

Condition: excellent (used), Year of construction: 2024, OPERATING RANGE V807M Min. / max. height 10 – 460 mm Min. / max. width 50 – 1.140 mm Max. positioning weight 15.000 kg Max. operating width bottom side 1140 mm 1 Bevel angle + / - 50° Minimum automatic infeed length 1900mm Knodpjzy Sqfsfx Afdsb Minimum automatic outfeed length Approx. 1400mm 2 1 Applicable to bottom side marking and square tube cutting. 2 1400mm automatic outfeed with at least one 1900mm part in the nesting. OPERATING SPEEDS Max. speed X-axis (measuring system) 60 m/min Max. air speed robot 11.6 m/sec Max. speed additional rotational axis 90 ͦ /sec ROBOT ACCURACY Repeatability ±0.04mm Absolute accuracy ±0.25mm MEASURING ROLL SYSTEM Max. speed 60 m/min Diameter measuring rolls 170 mm PLASMA CUTTING UNIT XPR300 CORE Min. thickness 3 mm Max. thickness 80 mm Max. pierce capacity 45 mm Dross-free cutting max. 38 mm Marking Yes, with same consumables Plasma gas mild steel Cutting O2 (99,5% pure clean, dry, oil-free) Marking Nitrogen gas Shield gas mild steel O2 and Air (ISO 8573-1:2010 Class 1.4.2) Automatic gas console Yes Cutting speed mild steel 6 mm Approx. 4.036 mm / min 130A 12 mm Approx. 3.061 mm / min 170A 25 mm Approx. 1.950 mm / min 300A 30 mm Approx. 1.530 mm / min 300A 40 mm Approx. 940 mm / min 300A 50 mm Approx. 560 mm / min 300A 80 mm Approx. 165 mm / min 300A * Grounding max. 6 m of machine: AC power, PE and service grounds must be connected to all equipment according to local and national codes.

Condition: excellent (used), Chip extractor Manufacturer: Ringler Connection hose: 60 mm Knsdpfezy Hwaox Afdjb Voltage: 380 volts Height: 1900 mm Depth: 950 mm Width: 750 mm

Condition: used, Year of construction: 2011, functionality: fully functional, power: 11 kW (14.96 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 400 mm, cutting width (max.): 850 mm, control type: CNC control, pivoting range: 75 °, actuation type: electric, rotational speed (max.): 4,000 rpm, rotational speed (min.): 200 rpm, total height: 3,200 mm, total length: 5,100 mm, total width: 3,300 mm, overall weight: 9,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, lighting, motor brake, 1 Mono-spindle drilling machine HDM + HBP band sawing machine Type: HDM 910 HBP 430/854 G (drilling and sawing line for steel construction) Manufacturer: Vernet - Behringer Drilling machine: - Dimensions of working unit: H=3200 L=5100 W=1800 - Weight: approx. 6 tons - Drilling power: 11.7 kW - Rotating speed: 200 to 4000 RPM - Cooling: external lubrication or by centre-cooled drills Sawing machine: - Machine size: Length=1850mm swivel range 3500mm Width=3300mm swivel range 3500mm Height=2600mm - Saw band size: 6.700 x 41 x 1.3mm - Weight: approx. 3 tons - Electric equipment: 400V / 50Hz - Power of motor: 7.5 kW, frequency regulated - Cutting speed: 17-110 m/min Technical capacities: more information can be found in the documentation - Max length of bars: 18m - Max weight of bars: 5 tons Sawing capacities: more information can be found in the documentation Tool clamp: ISO 40 Tool holders: 2x 5 pockets The industrial PC and the business software were updated in April 2025 (retrofit). Kodpfszytmzex Afdsnb The installation has been serviced annually.

Condition: ready for operation (used), Schunk Tribos SVP2 Clamping Device – Quick-Change System You are welcome to visit us for a demonstration. We would be happy to arrange cost-effective shipping for you! You will receive a proper invoice. Kjdpezyrczofx Afdsnb For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and browse our other offers as well. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are subject to change.

Year of construction: 2009, condition: used, functionality: fully functional, Professional electrically operated gutter forming machine designed for continuous production of half-round or angular gutters from coil material. Suitable for steel, aluminium and copper. The machine forms gutters directly from metal strip and is suitable for roofing, sheet-metal and rainwater system production. Technical specifications: Gutter type: half-round or angular Available gutter sizes: 125 mm and 150 mm (5" and 6") Material: galvanized/painted steel, aluminium, copper Steel thickness: 0.50–0.57 mm Copper: 16 oz Strip width: 298–381 mm Production speed: up to 16 m/min Electrically operated Continuous roll-forming process Robust industrial construction Advantages: Fast and efficient production with consistent gutter profile and dimensions. The machine is suitable both for workshop production and professional gutter manufacturing operations. Kjdpozyly Hefx Afdjnb Condition: Used, fully operational. Location: Latvia.

Year of construction: 2012, condition: ready for operation (used), functionality: fully functional, Oven for powder coating, with internal dimensions of 8200x1600x3600. Kjdpfx Afszylxcedjnb Gas burner with a power output of 125-390 kW.

Condition: used, Year of construction: 2012, functionality: unexamined, GERIMA SMA 50P portable beveling/edge preparation machines for sale. Knsdpfx Afezyah Ssdeb Quantity: - 2 units Main specifications: - Manufacturer: GERIMA - Model: SMA 50P - Year: 2012 - Portable beveling/chamfering machines - Suitable for metal edge preparation and beveling applications - Supplied in transport cases - Inserts/accessories included, as shown in the photos Used equipment, sold as-is. Condition and completeness are shown in the photos. The listed price is for both units. Individual sale can also be arranged. Location: Estonia. Loading/collection: Forklift/pallet handling capability available on-site. Transportation is at the buyer’s expense.

Year of construction: 2022, condition: new, functionality: fully functional, Automatic press loading – double infeed unit + 5-axis manipulator Complete automation solution for the automatic feeding, loading, unloading, and transfer of sheet metal parts in mechanical and hydraulic presses. The installation consists of a QF-LJZ600 double infeed/stacking unit in combination with a QF-5045-S6-5 5-axis manipulator with a 5 kg load capacity. This combination is ideally suited for automating existing presses and can be used for, among other things: • Automatic loading of a mechanical or hydraulic press as an alternative to manual loading • Automatic unloading of the pressed product • Unmanned or operator-assisted production • Transferring a product from one press to a subsequent press Knedpfx Aozx T Dqsfdob • Pick & place applications • Turning and repositioning products • Stacking finished products • Automating multiple consecutive pressing operations Double infeed/stacking unit, type QF-LJZ600 Automatic double-station system for feeding individual sheet metal parts/blanks to the manipulator. Key specifications: • Type: QF-LJZ600 / QFLJZ600×600 • Design: double station • Maximum sheet size: approx. 600 × 600 mm • Minimum sheet size: approx. 60 × 100 mm • Stack height: approx. 300–500 mm • Maximum load capacity: approx. 1,600 kg • Positioning accuracy: ± 0.2 mm • Production speed: up to approx. 12 cycles/minute, depending on the product and application • Connection: 380 V, 3-phase, 50/60 Hz • Power: approx. 2 kW • Suitable for, among others, steel, aluminum, and copper The dual-station design allows a new stack of material to be prepared while production continues from the other station, thereby minimizing downtime during material changes. 5-axis press manipulator, type QF-5045-S6-5 Servo-driven manipulator, specially designed for automating pressing operations. Key specifications: • Type: QF-5045-S6-5 • 5 servo-driven axes • Maximum load capacity: 5 kg • Equipped with fixture/vacuum pad/gripper • Programmable movements and trajectories • Absolute servo systems with position memory • Positioning accuracy: approx. ± 0.2 mm • Production speed: up to approx. 15 cycles/minute, depending on the application • Different products and movements can be programmed • Suitable for various gripping systems, including vacuum, pneumatic, and magnetic grippers Application for unmanned press production The installation can be integrated with an existing mechanical or hydraulic press. The sheet metal parts are automatically fed from the stack. The 5-axis manipulator picks up the product, positions it in the press, and can automatically remove the product after the pressing operation. Depending on the application, this can be used to create a fully automated or operator-assisted production cell. A possible configuration is, for example: Sheet stack → double infeed unit → manipulator → press → finished product Transfer from press to press Another interesting application is automating a production process with two or more existing presses. The manipulator can remove a product after the first pressing operation and automatically position it in a second press. General The installation was newly purchased in 2022 but has not been used. The installation is offered as a combination of an infeed/stacking unit and a 5-axis manipulator.