Used Burner for sale (663)

Condition: used, functionality: fully functional, machine/vehicle number: M237 026, power: 1,600 kW (2,175.39 HP), fuel type: gas, Year of construction: 2005, operating pressure: 10 bar, used steam boiler installation Fabricate: VIESSMANN Type: M237 026 Year: 2005 Kjdpey Tpm Hefx Aniedu Steamcapacity: 2.300 kg/h Max. pressure: 10 bar CE 0035 Complete with appendages, Weisshaupt burner G8/1-D ZMD, controlpanel, economiser, automatic blowdown valve on conductivity, 2 frequency controlled feedwaterpumps, sample cooler. Also 4500 liter cascade deaerator.

Condition: repair required (used), Year of construction: 2008, machine/vehicle number: 10719G, functionality: limited functionality, The HEUFT K0 400 has already been professionally dismantled by HEUFT. All operating and hazardous materials have been completely pumped out, and the system has been prepared accordingly for further handling. The cost for the professional dismantling alone amounted to approximately €2,500. Furthermore, the system was regularly maintained up until the dismantling. The burner included in the sale has been serviced and is in good condition. Model: WG40N/1-A ZM-LN. Serial No.: 583489708. The boiler itself has also been regularly maintained. The significant defect that we are aware of is the burnt-through boiler base. In addition, the control cabinet and boiler pump will not be included in the sale. Kdjdpfx Aszz Inioniju The boiler is ready for immediate collection.

Condition: new, Year of construction: 2006, functionality: fully functional, New complete set of Weishaupt WKMS 80/3-A ZM industrial heavy oil burner. The set is fully assembled by the manufacturer. All components are original Weishaupt products, matched to each other and designed to work together. The equipment is ready for installation and commissioning. Set contents: 1. Weishaupt WKMS 80/3-A ZM heavy oil burner, 3550-17500 kW 2. W-FM 200 WK Weishaupt control module for modulating burner operation 3. RD 2.5 Hz We17000126 Weishaupt air cooling fan 4. We2704010701-2 Weishaupt rotational speed sensor 5. Combination shut-off valve DN 50 for heavy oil EL and S, with pre-valve We1090000147-2 Weishaupt 6. Pressure transducer P 30-w, connection G1/2, 0-16 bar We690389 Weishaupt 7. VLT5072 frequency converter with braking device IP20 We795802 8. Differential pressure transducer in the combustion chamber We030-Ang20297 9. KS 40-108 regulator for burner output control We690345 10. LGW50 A2, 2.5-50 mbar air pressure relay We691371 11. VLT 5072 IP20 braking resistor We795803 12. Special version of the W-FM 200 combustion manager We27000498 13. Fan station No. PLT- P4M-N5B2X/N, 24000 m³/h, 45 mbar 14. SPZ 40-46 pump station with two pumps for heavy oil S4860 We17000490 15. WEV3/01 heavy oil preheating station, 1500 kg/h, 3 pcs We17000225 16. WK 80 ZM 80 ZM fabric expansion joint We27000533 17. WKMS80/3-A burner control cabinet with W-FM200 We30-Ws/SO-ang20297187 18. Noise silencer for ventilation station WEISHAUPT. Condition: * Year of manufacture - 2006; * Equipment is new; * Has been stored for a long time in a dry, closed warehouse; * Complete set; Ksdpfoz Alncex Anijdu * Complete set of accompanying documentation is available.

Condition: like new (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: RC 14-43, power: 810 kW (1,101.29 HP), GLASTON RC200 2136-380-R - Tempering furnace, 2100 x 3600 mm Group: Tempering - With convection (Low-e) Process: Tempering furnace, 2100 x 3600 mm Code: 90010x7 Manufacturer: GLASTON Model: RC200 2136-380-R Year of manufacture: 2014 Condition: As is Ksdjz D Ic Nepfx Aniedu Tempering furnace - Maximum glass size: 2100 x 3600 mm - Minimum glass size: 100 x 250 mm - Glass thickness: 4 - 19 mm - Total power: 810 kW - Vortex Plus convection system (top) - Technical description can be found in the appendix as technical data - In good working condition, still in operation - In very good and clean condition - As is - Immediately available Dismantling and installation can be carried out by our service team upon request.

Condition: good (used), Year of construction: 2011, fully automatic gas forced-air burner, Weishaupt / monarch, WM - G20/2-A – used – : Price ex works: €4,950 (net) incl. loading Manufacturer: Weishaupt / monarch Burner type: WM - G20/2-A Design: ZM Factory number: 40047114 Year of manufacture: 2011 Cat. 112R3R Gas type: N Output: min. 150 kW, max. 2,100 kW Connection pressure: min. 15, max. 500 mbar NOx class: 2 Kodpjz Sd E Eefx Aniedu Control voltage: 220 V Supply voltage: 400 V 4.32 kW Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia

Condition: excellent (used), Year of construction: 2022, operating hours: 600 h, functionality: fully functional, machine/vehicle number: PO210417, total width: 4,600 mm, total length: 25,000 mm, total height: 3,000 mm, type of input current: three-phase, energy consumption: 1,700 kWh, input current: 2,230 A, The AG series of convection tempering furnaces with forced air circulation (Northglass fifth-generation furnaces, featuring proprietary focused convection technology) was developed to meet the growing customer demand for more efficient low-E glass tempering, improved product quality, and reduced energy consumption. The AG series furnace integrates the advantages of a four-convection furnace, primarily offering benefits in terms of higher productivity, superior product quality, and easier process control. The furnace consists of loading conveyors, a heating section, a convection system (upper and lower), a flat tempering/cooling section, and an unloading conveyor. The equipment package includes air ducts and a device control system. Max. working width: 2,850 mm. Max. loading length: 5,000 mm. Max. glass loading area: 2,850 x 5,000 mm (5-19 mm), 2,850 x 4,600 mm (4 mm). Upper fan convection: 6 fans x 4 kW, lower: 6 fans x 3 kW. Main technical data is attached in a PDF file. Kdjdpez Dhm Uefx Aniju

Condition: excellent (used), Year of construction: 1975, Oil burner Weishaupt RL10. VZMDU Year of manufacture: 1975 We also speak Russian! Please arrange an inspection by phone. We prefer to sell to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Kdjdpei Atf Ejfx Aniju We will gladly purchase your used boiler or burner! We will, of course, take care of all the formalities. Loading is possible.

Condition: good (used), Year of construction: 2023, Dual-fuel burner, Weishaupt / monarch, WM - GL.20/3-A – used: Price ex works: €8,950 (net) incl. loading Manufacturer: Weishaupt / monarch Burner type: WM - GL.20/3-A Design: ZM-R-3LN multiflam® Factory number: 40709908 Year of manufacture: 2023 Cat. 112R3R Gas family: 2E/LL Gas: min. 275kW, max. 2,000kW Connection pressure: min. 15, max. 500 mbar Heating oil: min. 275kW, max. 2,000kW Heating oil EL PS 30 bar NOx class: N3 / EL3 Control voltage: 230V Supply voltage: 400V Electrical power: 5.22 kW Condition: good Available: immediately Location: Bünde, North Rhine-Westphalia Kodjz Sd Efopfx Anijdu

Year of construction: 2025, condition: like new (used), Nu-Way Enertech FMP40-MOD-NG350P+ Gas Burner 2025, unused, compact industrial packaged gas burner, covers outputs up to 150 therms, NAT GAS, 1.1Kw motor, 3Ph Ksdpfx Ajz E Nnpjniedu

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, power: 1,143 kW (1,554.05 HP), warranty duration: 12 months, # NorthGlass BU1E60 Glass Tempering Furnace – Fully Refurbished – 12-Month Warranty We offer for sale a NorthGlass BU1E60 horizontal glass tempering furnace equipped with a forced convection heating system. Kjdpfxsz Rv Dps Aniodu The furnace is pre-owned and has undergone a comprehensive refurbishment, including the replacement of major mechanical, electrical, and electronic components. Refurbishment work includes the replacement of: - Heating elements - Ceramic rollers - Electric motors - Automation and control systems - Electronic components The furnace has been fully refurbished and prepared for further industrial operation. Warranty: 12 months. ### Main Technical Specifications - Manufacturer: NorthGlass (China) - Model: BU1E60 - Condition: Used, fully refurbished - Maximum glass size: 2,850 × 6,000 mm - Minimum glass size: 300 × 300 mm - Glass thickness: 5–22 mm - Heating system: Forced convection - Convection system: 6 high-temperature upper convection fans with variable frequency control - Production capacity: 16–18 batches/hour (5 mm clear glass) - Heating power: 1,143 kW - Quenching fan power: 2 × 220 kW - Rated electrical capacity: 1,100 kVA - Minimum Low-E emissivity: ε = 0.04 - Quality standard: GB15763.2-2005 ### Supported Glass Types - Clear float glass - Low-E coated glass - Patterned glass - Body-tinted glass ### Equipment Configuration The furnace includes: - Loading table - Heating section - Flat glass quenching section - Unloading table - Electrical control system - Frequency converters - Air circulation system - Quenching fans with vibration isolation frames ### Key Advantages - Fully refurbished with replacement of major components - Advanced forced convection heating technology - Suitable for processing Low-E glass - Large processing capacity of up to 2,850 × 6,000 mm - High productivity of up to 18 batches per hour - 12-month warranty - Cost-effective alternative to purchasing a new glass tempering furnace ### Price and Delivery Price: Upon request Delivery terms and additional technical information are available upon request. Contact us for a detailed quotation, additional photographs, videos, and technical documentation.

Condition: used, Year of construction: 2007, temperature max. 450 ° internal length of the oven 1500 mm internal width of the oven 1500 mm internal height of the oven 2000 mm Ksdpfxs Aaq Srj Anisdu total power requirement 65 kW weight of the machine ca. 12.800 kg dimensions of the machine ca. 2,4 x 2,4 x 2,72 m

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Glass tempering machine for thicknesses from 3.8 to 19 mm. Maximum glass dimensions: 2440 x 4500 mm. Kdsdpfxsx Trg Aj Anisu

Condition: excellent (used), Year of construction: 2023, Dual-fuel burner Elco 3980kw EKEVO 7.3600 GL Weishaupt Kedewrlayspfx Anijdu

Condition: excellent (used), Year of construction: 2020, operating hours: 1,500 h, functionality: fully functional, The furnace is designed for the tempering of colored, ornamental, and screen-printed glass, as well as clear float glass with an emissivity of over 0.04. According to EN 12150:1 – 2000, for 4 mm thick glass, a success rate of at least 95% is guaranteed, and for glass thicker than 5 mm, a success rate of over 97% is guaranteed. Kdjdpfx Anoz Ru Iyeiju Structurally, the furnace consists of five distinct zones: loading, bending module, heating, cooling, and unloading. When tempering flat glass, the workflow is from left to right: loading – passing through the bending module (which functions as a flat conveyor) – heating – cooling – unloading. When bending glass, the following workflow applies: loading – passing through the bending module – heating – back into the bending module (where the glass is moved transversely along the length of the furnace from left to right while the upper and lower parts of the module gradually conform to the curve to be created) – unloading (in the case of curved glass, unloading also takes place at the entrance). The inlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides. The structure of the heating section is a box-type with a double layer coated with thermal insulation material (perfect insulation performance, low energy consumption, and natural cooling of 15 ℃ / h). Inside the heating zone, there is a conveyor system with ceramic rollers resistant to high temperatures, manufactured by Vesuvius (diameter 48 * Ø85mm, spacing 120mm). The heating elements (resistors) are installed on the upper and lower sides of this zone. The resistors are arranged in a matrix with temperature sensors, automatic heating and pause functions to save energy. The upper section has 25 heating elements, and the lower section also has 25. Each resistor has an independent control loop. Outlet conveyor The outlet conveyor is equipped with a roller table with pneumatic lifting/lowering and auxiliary rollers for loading and unloading from three sides.

Condition: good (used), EKU C9F-6GS 6-burner natural gas range Cooktop (gas burners) Number of cooking zones: 6 independent gas burners. Burner configuration: Divided into two performance classes for flexible pot sizes: 3 x small/medium burners: each 3.5 kW (burner head diameter approx. 80 mm) 3 x large high-performance burners: each 6.0 kW (burner head diameter approx. 110/120 mm) Total cooktop output: 28.5 kW gas output. Features: Cast iron pot supports (slide-out grates) and thermoelectric flame failure device on each burner for maximum operational safety. Oven (under-counter) Type: Gas-powered large-capacity oven (statically heated) with piezoelectric ignition. Oven output: approx. 8.0 kW to 9.0 kW burner output. Internal dimensions: Suitable for gastronorm racks and trays (GN 2/1). Temperature range: Adjustable from 100 °C to 300 °C via a safety gas thermostat. Connection values Total connection value (gas): approx. 36.5 kW to 37.5 kW (sum of cooktop and oven). Gas type: Standard setting for natural gas (20 mbar) Kdsdpfxoztkf Io Aniou (can be converted to liquefied gas/propane by changing the nozzles). Gas connection: R 1/2" or R 3/4" thread. Dimensions and weight Appliance external dimensions: approx. 1200 mm (width) x 900 mm (depth) x 850 mm (height) – suitable for the standardized 900 series of large kitchen modules. Material: Housing and top completely made of stainless chrome-nickel steel (CNS / stainless steel). "Everything from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs on request!

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Kodpfeqww Icex Aniedu

Condition: excellent (used), Year of construction: 2019, For sale are the following functional and well-maintained oil burners: 1. Burner type: WM-L10/3-A, MULTIFLAM Output: 200 - 900 kW 17-75 kg/h Design: T-3LN Year of manufacture: 2019 2. For sale is a functional and well-maintained oil burner from Weishaupt, model WM-GL10. It was only used with oil, therefore it does not have a gas line. Burner type: WM-L10/3-A Output: 110 - 1000 kW 15 - 84 kg/h Design: ZM-T Year of manufacture: 2007 3. Kjdpsy Uvhtsfx Anijdu For sale is a functional and well-maintained oil burner from Weishaupt, model RL3-A. Burner type: RL3-A Output: 120 - 775 kW 10 - 65 kg/h Design: ZMD Year of manufacture: 2002

Condition: used, Year of construction: 2012, functionality: fully functional, type of input current: AC, total length: 16,000 mm, total width: 8,000 mm, input frequency: 50 Hz, temperature: 58 °C, heating capacity: 120 kW (163.15 HP), We are offering this used SCHIELE Trockenkabine 80mm MW switchgear and switch cabinet, manufactured in 2012. Manufacturer: SCHIELE Model: Trockenkabine 80mm MW Year of manufacture: 2012 Description - Type of oven: Trockenkabine 80mm MW (Continuous flow dryer) - Year of manufacture: 2012 - Order number: 21204763 - Configuration: 2 identical compartments - - Each compartment: 8 m wide × 16 m long - Total: 2 compartments (therefore 2 × the specifications below) Each compartment has its own heating system (120 kW) and its own circulation fans. Specifications per compartment / Heating (Heizung) - Heating medium: Natural gas H (Erdgas H) - Installed heating capacity: 120 kW - Max. drying temperature: 58 °C - Max. temperature of the heating surfaces: 58 °C Kodpfx Ao Aax Ibjnisdu Airflows (per compartment) - Circulation volume flow (Umluftvolumenstrom): 2 × 22,500 m³/h = 45,000 m³/h total - Fresh air supply (Zuluftvolumenstrom): 900 – 3,600 m³/h (adjustable) - Min. exhaust volume flow at 20 °C (Mindestabluftvolumenstrom): 900 m³/h Fans / Motors (per compartment) - Circulation fans: 2 motors × 7.5 kW each → total 15 kW - Speed: 1,450 min⁻¹ (rpm) - Exhaust fan: 1 motor of 1.5 kW - Speed: 1,450 min⁻¹ - Max. VOC / solvent throughput - Höchstzul. Lösemitteldurchsatz: 7,600 g/h (grams per hour) - Gas burners (Weishaupt WG10N/1-D ZM-LN) The first photo shows the burner plate. Each compartment has one of these burners. Per burner (Weishaupt WG10N/1-D ZM-LN): - Capacity: 25 – 110 kW (modulating / sliding two-stage) - Fuel: Natural gas (Natural Gas E/LL) — also suitable for LPG, but set to natural gas - NOx class: NOx-CL 3 (low NOx emissions) - Voltage: 230 V, 50 Hz - Max. back pressure combustion chamber: see capacity chart (typically up to ±2.5 mbar) - Emissions: Complies with class 3 or 5 according to EN 676 (depending on the exact design and combustion chamber) - Burner weight: approx. 14 kg If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2017, 1. WESHAUPT gas burner, with DUNGS gas train DN65 Type: WM - G20/3-A Year of manufacture: 2017 Kjdpfx Anjzbz Idoiedu Output: 350-2600 kW Design: ZM 2. WESHAUPT gas burner, with DUNGS gas train DN65 Type: WM - G20/3-A Year of manufacture: 2013 Output: 350-2600 kW Design: ZM

Condition: excellent (used), Year of construction: 1988, Gas burner Weishaupt G70/2A, model: ZM Output: 1000-10900 kW Year of manufacture: 1988 Quantity: 3 Includes existing Dungs valves, DN100 We speak Russian! Viewings by appointment only. Preference given to sales to dealers, businesses, or for export. All information is provided without guarantee, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. Kjdpfohbr A Rex Aniedu We are happy to purchase your used boiler or burner! We will, of course, handle all necessary formalities. Loading possible.

Condition: excellent (used), Weishaupt RGL50 / 4900 kW / Oil & Gas / Dual-fuel burner Kodpfx Ajzal Nceniedu

Condition: used, Year of construction: 1979, MAN 19 280 F BREINING – Superstructure – FEDERAL Emulsion/Asphalt Spraying Unit Attention: Suitable only for emulsion, not for liquid asphalt! Control panel for the superstructure located in the driver’s cab! • Manual transmission • Differential lock • Long-distance cab • 1 sleeping berth • Leaf spring suspension • Tires: 12 R 22.5 (alternatively: 315 / 80 R 22.5) • Tank capacity: 6,000 liters of emulsion • Burner: NEW! Kjdpfx Aewmpcnenisdu • Spraying bar: 2 units, foldable! Errors and prior sale excepted! = Further information = Fuel type: Diesel Year of manufacture: March 1979 Mileage: 67,000 km Usable material: Asphalt Damage: Damaged vehicle (not roadworthy)

Condition: excellent (used), Year of construction: 2011, Weishaupt gas burner, model G30/3A-5700kW, year of manufacture 2011. Available as new stock or as used equipment from companies that have ceased operations but were still in service until the end. Please arrange inspections by telephone only. We prefer to sell to dealers, businesses, or for export. All information is provided without warranty, subject to errors and prior sale. The seller assumes no liability for typographical or data transmission errors. We will, of course, handle all necessary formalities. Loading and shipping are possible. Kodpfxji Dw D Sj Aniedu

Condition: excellent (used), Year of construction: 2007, For sale is a functional and very well-maintained gas burner from the brand Weishaupt, model WM-G30/2-A - 2300 kW, complete with gas piping from Dungs, DN50. 1. Weishaupt Burner type: WM-G30/2-A Output: 300 - 2300 kW Design: ZM-NR Ksdpfey Uvkzsx Anisdu Year of manufacture: 2007 2. For sale is a functional and very well-maintained gas burner from the brand Weishaupt, model G30/2-A - 2150 kW, complete with gas piping from Dungs, DN65. 2. Weishaupt Burner type: G30/2-A Output: 300 - 2150 kW Design: ZM Year of manufacture: 2001

Condition: good (used), Weishaupt oil burner L9T-320kg/h Kdodpspiqtcofx Anisu