Ms-Abazur

Condition: good (used), Year of construction: 1989, machine/vehicle number: 28913707-1, Offer 24014 Technical specifications: - Rated power at 50% duty cycle: 40 kVA - Max. welding power: 118 kVA - Adjustable overhang: 225 - 550 mm - Welding parameters: - Steel sheet: 4 + 4 mm - Brass sheet: 2 + 2 mm - Aluminum sheet: 1 + 1 mm - Adjustable electrode force: 65 - 390 daN - Required air pressure: 6 - 10 bar - Cooling water flow rate: 8 l/min - Control for: holding time, welding time, Hodpfx Aij Agunhorew - post-weld time + open time, as well as - pulse time + pause time - Voltage: 380 V - Space requirement: approx. W 600 x H 1350 x D 1550 mm - Weight: approx. 330 kg - Includes: - Complete electrical and pneumatic system - 6-time synchronous control MPS 1036 - Foot switch

Condition: excellent (used), Water-cooled chiller with refrigeration compressor, mobile Manufacturer: DELTATHERM, Model: LT 4 Hodps Aggkgsfx Airew Cooling capacity at 20°C: 5.1 kW Compressor power: 1090 W Pump power: 0.65 kW Tank volume: 30 l Weight: 110 kg

Condition: good (used), Equipment: documentation/manual, - 15 kVA - Maximum sheet thickness: 3 + 3 mm - Outreach: 340 mm - Adjustment of welding power - Adjustment of welding time - Documentation - 400V This spot welding machine comes from a technical school and has been used very little. Hedpj Af Nd Hefx Airsw

Condition: good (used), Year of construction: 1996, machine/vehicle number: 960537, Offer 24514 Technical data: - Rated power at 50% duty cycle: 35 kVA - Adjustable reach up to approx. 520 mm - Opening width up to approx. 250 mm - Welding values up to: - Steel sheet: 4 + 4 mm - Brass sheet: 3 + 3 mm - Aluminum sheet: 2.5 + 2.5 mm - Welding current adjustable in stages - Electrode force at 6 bar: 300 daN - Required air connection: 6 bar - Cooling water flow rate approx. 4 l/min Hedpfxs Afxk Hj Airew - Connection: 400 V - Space requirement approx.: W 670 x H 1550 x D 1350 mm - Weight approx.: 350 kg - Includes: - NIMAK control unit - Electronic foot switch - Separate cooling water re-cooling unit

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm Hodpfx Ao Ad Shvjirsw capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: excellent (used), Water-cooled chiller with refrigeration compressor Manufacturer: DELTATHERM, Type: LTk 3 Refrigeration capacity at water temperature 20°C: 3.2 kW Compressor power: 1.1 kW Pump power: 0.65 kW Water tank capacity: 30 l Mains connection: 230 V, 50 Hz Hjde Adt Spepfx Airsw

Condition: used, Year of construction: 2004, operating hours: 2,000 h, functionality: fully functional, input voltage: 240 V, input current: 2 A, input frequency: 50 Hz, Equipment: documentation/manual, We offer this used Miyachi MDB-2000B spot welding machine, year 2004. Input voltage: 200–240 V Frequency: 50/60 Hz Input current: 1.5 A It utilizes a polarity-reversing system, ensuring reliable performance at every welded spot. Hedpfx Aez S Dy Ieirow Throughout the entire welding pulse, it monitors both voltage and current, thereby minimizing undesirable effects. Selectable current ranges: 250 A, 500 A, 999 A, 3.00 kA RS-485 communication Dimensions: 172 x 423 x 270 mm Weight: 19 kg Power consumption: maximum 300 W The system also includes two mechanical setups for battery welding (see photos). They consist of frame with pneumatic drives and necessary end switches for proper triggering of operation. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Pressure: 6 bars Voltage: 380 V Hjdsz I Dgfjpfx Airow Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: refurbished (used), Power at 50%: 25kVA Short circuit-current: 22,4kA Electrode force: 17-178daN Throat depth: 180-500mm Hedpoz Alfnjfx Airow --- Weld control: RS 17 (5-times, 2-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: excellent (used), pneumatically operated, water-cooled spot welding pliers with manual control valve Manufacturer: DALEX, Type 3238 Rated power at 50% duty cycle: 16 kVA Hjdpfx Aez Ak H Doirjw Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 500 mm with double-acting cylinder: long stroke 75 mm, pre-stroke 50 mm, working stroke 0-25 mm with universal joint suspension and clamping bow 10 m connection cable with control cable also included: 1 piece DALEX synchronous control unit RS 12 with 3 m connection cable and 32 A CEE plug

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Medium-frequency spot welding machine – also suitable for welding aluminium. Rated power at 20% duty cycle: 180 kVA Max. welding power: 315 kVA Adjustable reach: 300 to 800 mm Arm spacing (min/max): 150–400 mm Electrode stroke: parallel stroke Electrode force adjustable up to 600 daN Weight: approx. 660 kg Welding control unit: Dalex L 4-6 Cooling water flow rate: 10 l/min Operating instructions and manual are available Hsdjzz Ripopfx Airsw Working stroke triggered by pneumatic foot pedal Very good, well-maintained condition

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type 3329 Hodpfszymccox Airew with double-acting cylinder, long stroke 60 mm, pre-stroke 40 mm, working stroke 0-20 mm Rated power at 50% duty cycle: 25 kVA Secondary short-circuit current: 17 kA Secondary open-circuit voltage: 4.7 V Electrode force: 440 daN Arm outreach: 350 mm Arm spacing: 300 mm with universal joint suspension and suspension bracket 10 m connection cable and control cable with Harting connectors for connection to auxiliary control unit B 200 with synchronous welding control MPS 10

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 00117, type of input current: three-phase, nominal power at 50% duty cycle: 90 kVA, input voltage: 400 V, type of cooling: water, welding power (max.): 245 kVA, nominal power (apparent): 90 kVA, air pressure: 6.5 bar, input frequency: 50 Hz, Equipment: type plate available, TECNA 2117 industrial DC inverter resistance welding machine, manufactured in Italy in 2004. The machine was previously used in production for resistance welding of aluminum trays. It is offered as a complete welding system as shown in the photos, including the custom-built supporting base/workstation and the integrated water cooling/chiller system used for cooling the welding arms and electrodes. Hedpezx D Tcofx Airsw The machine is equipped with programmable electronic welding control, pneumatic electrode actuation, program selection, and water-cooled welding electrodes. Technical specifications: Manufacturer: TECNA Model / Item: 2117 Serial No.: 00117 Year of manufacture: 2004 Type: DC inverter resistance welder Supply voltage: 400 V Frequency: 50 Hz Phases: 3 Nominal power at 50% duty cycle: 90 kVA Maximum welding power: 245 kVA Secondary no-load voltage: 9.4 V Maximum welding current: 32 kA Maximum electrode force: 736 daN Water cooling requirement: 10 l/min Compressed air supply pressure: 6.5 bar TECNA machine net weight: 178 kg Equipment and features: Programmable electronic welding controller Multiple welding program selection Pneumatic welding head Copper welding electrodes Water-cooled welding arms/electrodes Custom-built supporting base/workstation Integrated water cooling/chiller system Pressure regulation and pressure gauge Emergency stop Three-phase industrial power supply The complete assembly shown in the photos is included in the sale, including the TECNA welding machine, control equipment, custom-built supporting structure, and cooling/chiller unit. Previously used in an industrial production environment for welding aluminum trays. The machine is currently installed on its supporting structure and is available for inspection in Greece. EXW Greece. Loading and transport are at the buyer's cost and responsibility.

Condition: excellent (used), pneumatically operated, water-cooled toggle-lever spot welding machine Manufacturer: DALEX, Type: SL 202 Rated power at 50% duty cycle: 20 kVA Secondary short-circuit current: 15 kA Hsdpfezw U T Djx Airjw Electrode force: 420 daN Reach: 130 - 500 Arm distance: 250 mm Single-acting cylinder - 50 mm stroke with main switch according to VDE 0113 with synchronous welding control RS 17 PICTURES TO FOLLOW

Condition: good (used), – Power output: 15 kVA Hedpfx Aiezwkttorsw – Pneumatic – 380V

Condition: refurbished (used), Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock Hsdpfxezwhi Ss Airjw

Condition: excellent (used), hand-operated, water-cooled spot welding tongs with dual-stroke mechanism and short-stroke stop Short stroke: 25 mm - Long stroke: 57 mm Manufacturer: DALEX, Type: A 3119 Rated power at 50% duty cycle: 8.0 kVA Secondary short-circuit current: 9.5 kA Electrode force: 180 daN Arm spacing: 120 mm Arm outreach: 250 mm Hjdpezua Hkofx Airow also included: DALEX control unit RS 11-2 with connection plug 16 A CEE extensive range of electrode arms (all water-cooled) in stock

Condition: excellent (used), Foot-operated, water-cooled rocker-arm spot welding machine Manufacturer: DALEX, Model: SF 8-2 Rated power at 50% duty cycle: 8 kVA Secondary short-circuit current: 8.8 kA 4-stage switch Electrode force: 235 daN Arm extension: 80-300 mm Hodpeztyn Sefx Airow With synchronous welding control RS 11-2 With main switch

Condition: excellent (used), pneumatically operated, water-cooled spot welding tongs Manufacturer: DALEX, Type: 3238 with double-acting cylinder and manual control valve Long stroke: 75 mm – Pre-stroke: 25 mm – Working stroke with stroke adjustment: 0-25 mm Rated power at 50% duty cycle: 16 kVA Secondary short-circuit current: 13.5 kA Electrode force: 270 daN Arm spacing: 130 mm Arm extension: 350 mm with universal joint suspension and suspension bracket 10 m connection cable Hsdpfx Asztmb Esirjw included: Synchronous welding control RS 12 with main switch and 32 A CEE plug.

Condition: excellent (used), Parallel-operated, water-cooled spot welding machine Manufacturer: DALEX, Model: PL 63-1 Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 31.5 kA Secondary open-circuit voltage: 7.04 V Electrode force: 390 daN Reach: 250-550 mm Arm distance: 150 or 310 mm with mounting control cabinet according to VDE 0113 Main switch Hodpfxozrupzj Airsw Synchronous welding control 15036

Condition: defective spare-parts repository (used), functionality: not functional, NIMAK BMP 20/200 spot welding machine for sale Hsdezp H Ukopfx Airsw Arm length: 300 mm Power: 200 kVA The machine is out of service, and its condition is unknown.

Condition: new, Year of construction: 2026, The KL2000 machine combines welding, cleaning, and cutting into a single compact unit. It offers an energy-efficient, low-maintenance, ensuring high precision and fast operating speeds across various metal types. Technical Specifications: Laser Source: 2kW Laser Type: Fiber Laser (Raycus) Hedpszmtmhofx Airsw Laser Wavelength: 1080 nm Adjustment of power: 10 - 100% Output Power Stability: < 3% Central focus distance: 150mm Adjustable axial run-out (weld seam): 0.1 - 5 mm Laser Cooling System: Integrated water cooling chiller Power Supply: 220V 50Hz Machine Power: ≤ 9.5kW Operating Environment Temperature: 10 - 40°C Operating Environment Humidity: < 70% (No condensation) Laser Head Cable Length: 8 m Machine Dimensions (L x W x H): 1,000 x 550 x 650 mm Weight: 210 kg CE Certification: Included

Condition: like new (used), Power at 50%: 35kVA Short circuit-current: 15,5kA Electrode force: 470daN / double stroke Throat depth: 400mm --- Hsdpfszl A S Rex Airjw Weld control: TE 101 (8-times, 100-program) --- Extra Equipment: - foot pedal - main switch --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: used, Year of construction: 2008, throat depth: 680 mm, nominal power at 50% duty cycle: 45 kVA, input voltage: 400 V, Combined roll seam and spot welding machine, type UN63 - Roll seam welding - Rated voltage 400V/50Hz - Rated power 45kVA - Welding current 15kA - Fuse rating 125A - Overhang 670mm Hedpfx Ajzh Izcjirjw - Upper roller diameter 175mm - Lower roller diameter 120mm - Arm distance 350mm - Electrode force 500daN - Stroke approx. 30mm - TE500 control unit with 99 welding programs, parameters for each program, digital current display after each weld, current monitoring, stepper function, Language selection: German, English, Italian, French, etc., with operating manual - 2-stage foot switch according to UVV standards - Machine main switch - Pneumatic maintenance unit - Weight approx. 680kg - Documentation with circuit diagram, compressed air diagram, and cooling water circuit - VAT can be shown separately - Spot welding fixture / electrode holder and lower arm available at an extra cost. The machine is located in Dresden, near the A17 highway, and can be inspected and demonstrated by appointment. On-site commissioning is subject to a fee, billed according to actual effort.

Condition: used, Year of construction: 2001, functionality: fully functional, Straight Down Punching Machine, EME brand, 60 KVA, 380V, Single-phase, Used. Hjdpjzhuctjfx Airow