Technischer Vertrieb und Beratung WegeleWegele

Condition: good (used), Year of construction: 1999, Manufacturer: Hitachi Seiki Model: VK45 II Year of manufacture: 1999 Machine type: Vertical CNC machining center Control system: SEICOS Σ10M / A10M X-axis travel: approx. 760 mm Y-axis travel: approx. 500 mm Z-axis travel: approx. 500 mm Table: approx. 1,120 × 485 mm Max. table load: approx. 750 kg Tool changer: 30 positions Dedpfx Apjzy Rbpetjcl Spindle speed: typically up to 8,000 rpm Tool holder: SK40 Weight: approximately 6,000–6,500 kg

Condition: used, Year of construction: 1997, Haas VF-2 CNC Vertical Machining Centre with Haas Control. S/No. 10064 (04/1997), Table size 915mm x 355mm, 20 Tool ATC, BT40 Spindle Taper Dcedjzy N H Depfx Aptsl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2000, Cincinnati Arrow VMC 750 Vertical Machining Centre with Heidenhain Control, Table Size 950mm x 520mm, 21 Tool ATC, BT40 Spindle Taper, Handwheel Pendant, Machine Weight 3300kg. S/No. 7043-H00-KK1379 (2000). Country of Origin: United Kingdom Location: These lots are located in Gateshead, UK. Unfortunately there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described Dcjdpfozy Nkcex Aptjl

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,246 h, travel distance X-axis: 750 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,000 mm, overall weight: 8,500 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 30,000 W, product length (max.): 4,500 mm, number of axes: 4, This 4-axis AXA DBZ vertical machining centre was manufactured in 2005. It features a travel of 750 mm in the X and Y axes, and 600 mm in the Z axis. The machine includes a robust table size of 1000 x 500 mm, with a maximum table load of 800 kg/m². If you are looking to get high-quality machining capabilities, consider the AXA DBZ vertical machining centre we have for sale. Contact us for further details. - Travel X / Y / Z: 2 x 750 mm (for shuttle mode) / 500 mm / 600 mm- Machine Table: 2 x (1,000 x 500 mm)- Additional Axes: 1x 4th axis- Table Load: max. 800 kg/m²- Tool Taper: SK 40 (DIN 69871 A)- Tool Changer: 22 positions- Max. Tool Length / Diameter: 400 mm / 85 mm (135 mm with free adjacent slots)- Max. Spindle Speed: 10,000 rpm- Spindle Power / Torque: approx. 30 kW / 143 Nm (at 40% duty cycle)- Rapid Traverse (X, Y / Z): 25–26 m/min (X, Y) / 20 m/min (Z)- Supply Voltage: 3x400V/230V/N/PE- Frequency: 50 Hz- Connected Load: 55 kVA- Backup Fuse: max. 100A- Control Voltage: 24V-- Machine Weight: approx. 8,500 kg- Footprint / Dimensions (L x H): approx. 4,500 mm x 3,000 mm- Control on: 127984 hours - Machine on: 119531 hours- Program on: 48246 hours Dcjdpezy Hxdjfx Aptel

Condition: good (used), Year of construction: 2007, functionality: fully functional, HAAS VF-2SSHE + MIDACO Pallet System – 2007 CNC Vertical Machining Center with Pallet System For sale: HAAS VF-2SSHE CNC vertical machining center, equipped with a MIDACO pallet system. Dedozypt Rjpfx Aptecl The machine is installed, in working condition, and available for inspection and testing while powered on, by prior arrangement. Technical data: Manufacturer: HAAS Model: VF-2SSHE Year of manufacture: 2007 Serial number: 1061369 X-axis travel: 762 mm Y-axis travel: 406 mm Z-axis travel: 508 mm Table size: approx. 914 × 356 mm Spindle taper: ISO 40 Automatic tool changer MIDACO pallet system included Power supply: 360–480 V / 3 phase Machine in good working condition Inspection and test run possible while powered on The MIDACO pallet system allows workpiece preparation outside the machining area and can help reduce loading and unloading times, making the machine particularly suitable for series production. Further technical details and the exact machine configuration can be verified during an on-site inspection.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 37,780 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 500 mm, controller manufacturer: HURCO, controller model: Ultimax 3, table width: 450 mm, table length: 1,000 mm, table load: 500 kg, overall weight: 4,600 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of slots in tool magazine: 24, number of axes: 3, This 3-axis Hurco BMC30AP was manufactured in 1994. It features X, Y, and Z travels of 760 mm, 460 mm, and 500 mm, respectively, with a robust table size of 1000 x 450 mm and a maximum table load capacity of 500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco BMC30AP vertical machining centre we have for sale. Contact us for further details. - Display: TFT- Spindle Speed Range: 30 - 6,000 RPM- Gear / Speed Adjustment: Two-stage gearbox; infinitely variable per range- Tool Changer Type: Umbrella type, automatic- Coolant Supply: Flood cooling- Chip Conveyor: Available- DXF Option: Available on control and floppy disk- Computer Connection: 9-pin; RS-232 (Port 1)- Installed Software Version / Hardware: Ultimax 3 V1.53- Operating Voltages: 440 / 415 / 380 / 220 V, 3-phase- Mains Frequency / Apparent Power: 50-60 Hz / 20 kVA- Rapid Traverse Rate: 15 m/min- Compressed Air Requirement / Operating Pressure: 6 bar- Included Documentation:- Parts Listings & Wiring Diagrams - BMC 30 (1991, English)- Machine Operation and Maintenance (11/1993 Rev. B, English)- Options Manual Ultimax 4 (2004 Rev. A, German)- 2x BMC Operator Manual: BMC 30 with Ultimax 3 (06/1995 Rev. C, German)- Included Software & Backup Floppy Disks:- Optikey Utility Disk - Security Modifier Mill V1.52-V1.59- Optikey Utility Disk - Software Option DXF- Ultimax 3 Version 1.53 - Disk 1 and Disk 2- Ultimax 3 Machine Configuration- Backup Machine Config- Condition & Repair Notes: Machine needs to be rebooted via floppy disks because the buffer battery was depleted. One circuit board was repaired by the machine lab (new capacitors and a new Intel processor installed). Dcedpozylx Ajfx Aptel Technical Specification Taper Size ISO 40

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Dcjdpfxjzylhkj Aptel Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2008, HAAS VF-2SSYTCE cnc machining center Year: 2008 Technical details: X axis travel 762mm Y axis travel 508mm Z axis travel 508mm Spindle nose BT 40 Spindle speed max 12000 rpm Power 22.4 kW Tool changer 24 positions Maximum tool diameter 64mm Maximum tool length 279mm Maximum tool weight 5 kgs Table size 914x457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Inline direct Spindle Drive 12000 rpm spindle Extended Y-travel, 508 mm Digital remote control Prepared for 4.axis ( drive and wiring included ) Dodpfxozyk N He Aptecl USB port Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: excellent (used), Year of construction: 2010, operating hours: 1,049 h, functionality: fully functional, HAAS VF-2 + 4th axis Year of manufacture: 2010 Condition: good, machine is functional and in operation Cutting time: only 1,049 hours Machine accuracy: approx. 0.01–0.02 mm Technical specifications: Travel in X / Y / Z: 762 × 406 × 508 mm Work table dimensions: 914 × 356 mm Maximum table load: 1,361 kg Spindle taper: ISO 40 Maximum spindle speed: 12,000 rpm Tool magazine: 24 positions 4th axis – original Haas Renishaw tool probe Dedpjzyabrjfx Aptscl Control system: HAAS CNC Chip conveyor

Condition: ready for operation (used), Year of construction: 2019, operating hours: 22,918 h, travel distance X-axis: 700 mm, overall weight: 4,250 kg, spindle speed (max.): 24,000 rpm, number of axes: 5, This 5-axis DMG MORI DMP 70 was manufactured in 2019. It features a maximum spindle speed of 24,000 rpm and a weight of 4,250 kg, making it a robust option for precision machining. If you are looking to get high-quality machining capabilities, consider the DMG MORI DMP 70 vertical machining centre we have for sale. Contact us for further details. - Phase: L1/L2/L3/N/PE- Power Consumption: 30 kVA- Maximum Current (A In max): 43.5 A- Rated Current: 50 A- Short-Circuit Current (V max): 5 kA / 440 V max.- Voltage: 400 V ±10%- Frequency: 50 Hz- Control Voltage AC: 230 V- Control Voltage DC: 24 V Dcjdpfszx Sryox Aptsl

Condition: used, Year of construction: 2009, Haas VF-2CDE CNC Vertical Machining Centre with Haas CNC Control. S/No. 1075853 (11/2009), Table size 415mm x 355mm, 20 Tool ATC, BT40 Spindle, Swarf Argur with Rotary Table Brushless Converter for use with 4th Axis. Dcodpezx Axwefx Aptjl Location: These lots are located in Andover, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm y-travel: 406 mm Dcsdpjzxz Hgefx Aptol z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: like new (used), Year of construction: 2006, operating hours: 9,039 h, functionality: fully functional, total height: 2,992 mm, total length: 3,980 mm, total width: 2,580 mm, overall weight: 8,500 kg, operating hours of spindle: 671 h, number of slots in tool magazine: 48, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, We offer this as new Quaser MV154 APC/P vertical machining center, year of construction 2006. The machine has 9039 power-on hours, but only 671 spindle-hours, this has been confirmed in the parameters aswell. The machine has seen very little usage. When i bought this machine the linear guides for the X & Y axis was worn out as they had not been lubricated properly and with the incorrect grease. These have been swapped for brand new ones, aswell as most of the air and coolant hoses. All the lubricating lines for the X & Y guides and ballscrews have also been renewed. There are some tools in the 48 tool magazine aswell. It also has a 3D Taster. The chip conveyor also has new bearings and seals. Two Hilma vices could also come with the machine. I have done a ballbar test and checked the machine to be in great working order. The size of the machine also makes transportation easy, as it will fit inside a standard curtain semitrailer. Dedpfxjzxz Dfo Aptjcl If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2015, Specifications Condition Used Year 2017 Clamping area of the table 500 mm Dcodpfxozxw Ito Aptsl Travel in the x-axis 762 mm Travel in the y-axis 508 mm Travel in the z-axis 508 mm Spindle speed 0 - 12000 rpm Number of driven axes 5 Cooling through the spindle YES Cooling pressure bar Spindle taper 40 Max. workpiece weight 300 kg Tool magazine YES Number of positions in the magazine 40+1 B-axis +35/-110 ° C-axis 360 ° Max. table load 300 kg Max. spindle torque 122 Nm Rapid traverse 22.9 m/min Machine weight 6463 kg Total power input 28 kVA

Condition: like new (used), Year of construction: 2008, operating hours: 3,088 h, functionality: fully functional, machine/vehicle number: P08ZWG962, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, feed rate X-axis: 54 m/min, feed rate Y-axis: 54 m/min, feed rate Z-axis: 54 m/min, total height: 2,336 mm, total length: 1,565 mm, total width: 2,027 mm, table width: 400 mm, table length: 650 mm, table load: 300 kg, overall weight: 2,100 kg, spindle speed (min.): 24,000 rpm, distance table center to spindle nose: 250 mm, spindle motor power: 5,500 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: documentation/manual, The machine is in very good condition and has been used sparingly. It has only processed aluminum alloys. The machine comes with various tool holders, as shown in the photos – thermal tool holders, Weldon tool holders, etc., totaling 47 pieces. Additionally, it includes a probing sensor: Garant Hoffmann 359500 - a 3D digital sensor with a tactile probe. The spindle has a BT30 tool clamping taper. The video shows the machine with a 4-5 axis configuration, but this is not included in the sale. Direct sale to end-users only. The price includes loading at the seller's location: W-Technology s.r.o. Dcjdpfezw Iv Eox Aptel Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, total height: 2,600 mm, total length: 3,300 mm, total width: 2,000 mm, overall weight: 5,600 kg, spindle speed (max.): 12,000 rpm, number of spindles: 1, Equipment: chip conveyor, documentation/manual, Here is an offer for a vertical machining center from the manufacturer Akira Seiki with a dual-pallet changer. The machine is in good condition and can be inspected and tested at any time. Manufacturer: Akira Seiki Type: RMV700APC Year of manufacture: 2016 Control: Akira Mi745 - Mitsubishi Technical data: Dcedpfx Aozwvqkjptol Travel ranges X-Y-Z: 700x400x400 mm Table/pallet: 700x400 mm Number of pallets: 2 (APC) Max. table load: 160 kg Spindle nose to table: 200–600 mm Spindle speed: 12,000 rpm Rapid traverse rate X: 48 m/min Rapid traverse rate Y: 60 m/min Rapid traverse rate Z: 72 m/min Cutting feed rate: 10 m/min Tool magazine: 24 + 1 Spindle taper: HSK63 Max. tool diameter: 75 mm Max. tool length: 200 mm Max. tool weight: 4.5 kg Tool change time (T–T): 1.9 s Chip-to-chip time: 3.4 s Positioning accuracy: 0.012 mm Repeatability: ±0.005 mm Coolant tank: 150 l Power consumption: 25 kVA Compressed air: 0.5 MPa Machine weight approx.: 5,600 kg Footprint according to manufacturer: 1,900 × 3,144 mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 7,500 rpm, number of slots in tool magazine: 20, Equipment: chip conveyor, Haas VF1 Vertical Machining Centre,2011, table 660 x 356mm, trav 508 x 406 x 508mm, bt40, 20atc, 7,500rpm, rigid tapping , Liquid cooled, Chip conveyor Dcjdszwuryspfx Aptsl

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Dedezwurajpfx Aptjcl Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Coolant system Manual

Condition: excellent (used), Year of construction: 2011, Winmax control Travel paths X/Y/Z: 760 x 510 x 610 mm Dsdpfx Apozwhk Netscl Table clamping surface: 1020 x 510 mm Spindle speed: 12,000 min-1 Tool magazine for 24 tools, SK 40 Through-spindle coolant 20 bar

Condition: used, Year of construction: 2014, operating hours: 24,209 h, functionality: fully functional, machine/vehicle number: 286-56, total height: 3,000 mm, total length: 4,545 mm, total width: 2,450 mm, table width: 860 mm, table height: 975 mm, overall weight: 10,800 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 48, Equipment: chip conveyor, documentation/manual, For sale is a CHIRON FZ15 W Magnum high-speed machining center (Type 286-56) from 2014. The machine is a fast, single-spindle traveling column machine with an integrated workpiece changer and a FANUC control (31i series), designed for productive series machining of metal and plastic parts (milling, drilling, threading, reaming, boring). Technical data: Control: FANUC 31i Travel ranges X/Y/Z: 730 / 400 / 360 mm Rapid traverse X/Y/Z: 75 m/min Spindle speed max.: 12,000 min⁻¹ Spindle power: 7.5 – 15.0 kW Spindle torque max.: 95 Nm Tool holder: HSK-A63 Tool magazine: Chain magazine, 48 positions Max. tool length: 300 mm Max. tool diameter: 78 mm (140 mm with free adjacent position) Max. tool weight: 8 kg (10 kg with reinforced positions) Workpiece changer (tandem/tilting device), bridge dimension 800 mm, max. fixture height 234 mm Enclosed cabinet, coolant emulsion Equipment / Peripherals: Coolant system TPF 350S (Bürener) with paper band filter and double safety filter, filling volume approx. 980 l Tool internal cooling (high pressure through spindle) Chip conveyor Extraction system / emulsion mist separator (Handte, EM Compact 800) Control cabinet cooler Oil central lubrication Table measuring probe Renishaw TS27R Coolant gun Energy-saving and warm-up functions (PowerSave / WarmUp) Connection values: Electrical connection: approx. 27 kVA, connection M40 Compressed air: min. 5.5 bar, approx. 510 Nl/min Coolant connection DN40 Dimensions / Installation: Dcjdpfx Aezv Tlvjptsl Footprint approx. 4,543 × 4,441 mm (L × W, incl. peripherals) Height approx. 2,405 mm (max. 3,042 mm with extraction system)

Condition: ready for operation (used), Year of construction: 2011, operating hours: 83,422 h, travel distance X-axis: 700 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 820 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, total height: 3,600 mm, table width: 630 mm, table load: 850 kg, overall weight: 18,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 33,000 W, number of slots in tool magazine: 24, swivel angle A-axis (max.): 150 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis KOVOSVIT MAS MCU 630V-5X was manufactured in 2011. It features a HEIDENHAIN iTNC 530 control, a spindle speed of up to 12,000 min⁻¹, and a maximum torque of 157/215 Nm. The machine supports a table load of 850 kg and includes options like cooling through the spindle and a Probe OPM40. Ideal for complex machining tasks, the KOVOSVIT MAS MCU 630V-5X vertical machining centre we have for sale. For more information about this vertical machining centre, please reach out to us. Machine Benefits Qualitative Machine Benefits • Perfect condition • Full documentation available including service history Technical Machine Benefits Dcodpfjzv N Iaex Aptol • Rapid traverse x, y, z: 60 m/min • Acceleration x, y, z: 6. 5 m/s² Dimensions Machine Depth 4200 mm Technical Specification Taper Size ISO 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2003, operating hours: 28,800 h, travel distance X-axis: 760 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 560 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 840 D, number of axes: 5, This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine. Dcedpfxezvvbao Aptjl • Axes: A-axis NC rotary axis, B-axis NC swivel milling head, V-axis (6th-side machining) • Tool magazine: 60 positions, HSK-A 63 • Coolant: internal coolant supply Additional equipment • Chip conveyor • Tailstock • Bar feeder

Condition: ready for operation (used), Year of construction: 2004, operating hours: 86,963 h, travel distance X-axis: 700 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 560 mm, number of axes: 5, This 5-axis DECKEL MAHO DMP60S was manufactured in 2004, featuring a vertical machining center with X 760 mm, Y 460 mm, and Z 560 mm travels. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply, chip conveyor, and a paper belt filter system. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine. Dcsdpfx Aszvvaioptol • Axes: A-axis NC rotary; B-axis NC swivel milling head; V-axis for 6th-side machining • Tool magazine: 60 positions, HSK-A 63 • Internal coolant supply Additional equipment • Chip conveyor • Tailstock • Bar feeder • Hainbuch chuck up to Ø65 • Paper belt filter system

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 750 mm, travel distance Y-axis: 430 mm, travel distance Z-axis: 530 mm, controller manufacturer: FANUC, controller model: Oi MF5, total height: 2,850 mm, total width: 2,600 mm, table width: 420 mm, table length: 750 mm, table load: 400 kg, overall weight: 5,000 kg, spindle speed (max.): 11,000 rpm, spindle motor power: 11,000 W, number of slots in tool magazine: 24, product length (max.): 2,400 mm, number of axes: 4, This 4-axis Z-YANG V7L was manufactured in 2021. It features an X-axis travel of 750 mm, Y-axis travel of 430 mm, and Z-axis travel of 530 mm. The machine is equipped with a FANUC Oi MF5 control system, a powerful 11 kW spindle motor, and an automatic tool changer with 24 tools. If you are looking to get high-quality metalworking capabilities, consider the Z-YANG V7L vertical machining centre we have for sale. Contact us for further details. • Automatic Tool Changer: 24 tools • Rapid Traverse: 48 m/min Dsdpfxezvu S Do Aptocl • Feed Rate: up to 15 m/min Additional equipment • Chip conveyor (included) Technical Specification Taper Size BT 40

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 710 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 210 mm, controller manufacturer: SIEMENS, controller model: SIMATIC HMI, overall weight: 670 kg, spindle speed (max.): 20,000 rpm, number of axes: 3, This 3-axis ISEL FLATCOM M 30 was manufactured in 2015. It features a PC control unit with a touchscreen operator panel and an emergency stop button, ensuring user-friendly operation. The machine includes a Ruwac industrial suction system for efficient extraction and a coolant supply specified for ethanol. If you are looking to get high-quality machining capabilities, consider the ISEL FLATCOM M 30 vertical machining centre we have for sale. Contact us for further details. Dcedpfx Aezu Sa Aeptel • Control System: PC Control Unit with touchscreen operator panel & Emergency Stop button; secondary SIEMENS SIMATIC HMI Touch panel housed in a Rittal enclosure • Auxiliary / Extraction Equipment: Ruwac industrial suction/vacuum system with flexible hoses attached • Cooling/Lubrication Unit: Coolant/Lubricant supply specified for Ethanol ("Zu verwendender Kühl- + Schmierstoff: Ethanol") • Pneumatics: Integrated Festo pneumatic air preparation assembly with pressure regulator, pressure gauge, and filter units; KITA pressure sensor unit • Internal Enclosure Cooling: Cabinet air conditioning/cooling unit mounted on lower enclosure door • Enclosure Type: Fully enclosed aluminum profile frame with transparent safety glass/polycarbonate sliding doors and warning hazard signage