Efd Induction Romania

Condition: good (used), Year of construction: 1993, Sheet metal width: 6200 mm Sheet metal thickness: 8 mm Overhang: 60 mm Stand spacing: 6400 mm Cutting angle adjustment: 0.5 to 2° Total power requirement: 13 kW Dkedpfszi Uxqsx Akzep Machine weight (approx.): 19 t

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Dkedszi Uxkepfx Akzep Total power requirement 12 kW Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: used, functionality: limited functionality, Year of construction: 2009, operating hours: 14,021 h, machine/vehicle number: 09528020, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Omron, working width: 3,040 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, stroke rate (max.): 12 1/min, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge speed R-axis: 330 mm/s, input voltage: 400 V, input current: 17 A, type of input current: three-phase, overall weight: 5,960 kg, total length: 3,706 mm, total width: 1,355 mm, total height: 1,955 mm, year of last overhaul: 2021, Equipment: centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, FASTI 528-30/6 hydraulic guillotine shear Dkedpszi Uq Hjfx Akzjp usable length 3040mm Year of manufacture 2009, demonstration unit purchased in 12/2011 Max. sheet thickness at 400 N/mm2: 4.0mm Max. sheet thickness at 700 N/mm2: 6.0mm CNC control FM5.1 additional blade for re-sharpening Machine serviced by the manufacturer's service department Machine in good working order, in continuous use, minor oil leak on the right cylinder Machine for sale due to a change in the machine park

Condition: good (used), functionality: fully functional, Year of construction: 1987, Used 3-meter plate shear from Haco Atlantic Dkedpozi Rl Tefx Akzjp Type: ATS 3006 Capacity: 3100 x 6 mm Electric back gauge Electric cutting angle adjustment Year of manufacture: 1987

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2020, control type: CNC control, working width: 3,000 mm, sheet thickness (max.): 6 mm, overall weight: 6,500 kg, Hydraulic plate shear Manufacturer: Schrödergroup, Type: Powershear – 3000 x 6mm Year of manufacture: 2020 Technical data Manufacturer: Schröder Type: 530 - 30/6 Year of manufacture: 2020 Sheet width: 3040 mm Sheet thickness: 6.00 mm (400N/mm) Dkodpfxjzi Ezvo Akzsp Shear gap adjustment: 0.5 – 1.8 mm Stroke rate: 24-61 strokes/min Drive power: 12.0 kW Space requirement (L x W x H): approx. L 4.00 x 3.00 x 1.96 m Weight: approx. 6.5 t Equipment - 12" touchscreen control PSC 150 on a swiveling panel - energy-efficient drive for frequency-controlled motor and pump - automatic shear gap adjustment - Adjustable clamping pressure, pre-selectable via the control unit - motorized back gauge 10-1000 mm on ball screw spindles - pneumatic sheet metal holding device - LED cutting edge lighting - programmable start and end position of the blade beam - angle stop mounted on the left, incl. electronic length measuring system, fine adjustment and side folding stop on linear guide 1000 mm - 2 stop arms with ball rollers, movable on a linear guide - table support made of stainless steel sheets, incl. ball rollers - protection of the rear side with a light curtain - scrap and small parts chute to the front, incl. "Return to Sender" function - movable table extension mounted on a guide rail - finger guard, retractable to approx. 1500 mm, incl. electrical protection All information without guarantee. A demonstration is possible at any time in our showroom.

Condition: like new (used), functionality: fully functional, Year of construction: 2018, operating hours: 100 h, Equipment: type plate available, Amada GS II 630 EVO sheet metal shear model year 2018, Working width 3050mm, max sheet thickness steel 40-45kg/mm2/6.35mm Max. sheet thickness stainless steel 60kg/mm2/4mm, aluminum max. sheet thickness 30kg/mm2/8mm. Accessories Side guide front stop beam 1m, Front stop beam 1m 2pcs, Standard lever stop 2pcs, Ball support 1.5m 3pcs. Cutting quantity 15,000 times. Pump operating hours 100h. Very little used Dkodoziviwopfx Akzsp

Condition: good (used), functionality: fully functional, Year of construction: 1991, operating hours: 9,632 h, actuation type: hydraulic, number of support arms: 4, Equipment: documentation/manual, type plate available, We are offering this used Beyeler CP 3100 X 13 hydraulic plate shear, manufactured in 1991, in good condition. Manufacturer: Beyeler Machines S.A. Type: hydraulic plate shear Model: CP 3100 X 13 Serial number: 91 3038 Year of manufacture: 1991 Condition: good Dkedpjziktdjfx Akzop If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: used, Hydraulic Shear SAGITA BEYELER Capacity: 3100 mm x Max thickness 4 mm Electric Back rear stop travel: 800 mm Voltage: 380 V Length: 4000 mm Width with part support: 3700 mm Width without part support: 2000 mm Total height: 1500 mm Weight: approx 5 T Dedpsziaf Nefx Akzekp

Condition: new, Hydraulic plate shear Fintek Type/Model: TS 2080 x 6.5 Condition: New Exclusive: Trade fair machine EURO-Blech Hannover 2026 Compact hydraulic plate shear, ideal for metal and container construction. The generous support arms and the table with integrated rollers make the positioning and processing of large workpieces precise and easy. Operation is via a foot pedal, leaving the hands free to align the workpiece. Technical data Cutting length: 2080 mm Sheet thickness: 6.5 mm Strokes/min: 24 - 36 Number of clamps: 12 Clamp pressure: 5.6 t Front support arms: 1000 mm Rear stop: 600 mm Cutting angle: 1/2 - 2° Motor power: 11 kW - High-quality, high-alloy shear blades with a high chromium content, suitable for stainless steel - Upper blade 2-edged, lower blade 4-edged - Hydraulic cutting angle adjustment ensures a clean, low-distortion and precise cut at any sheet thickness - Manual cutting gap adjustment (models from 4.5 mm and larger) - Excellent visibility of cutting lines via LED with shadow projection - High number of strokes per minute ensures fast operation - Generous support arms with adjustable stop - Side stop with double scale (metric/imperial) - Feed work table with ball rollers for effortless movement of the sheet - Continuous front guard - Hydraulic, independent clamps ensure perfect clamping of the sheet at all times, regardless of the degree of wear of the clamps, by applying the same pressure (no slippage or dragging of the sheet during cutting) - Manual rear stop 600 mm - Overload-protected hydraulic system - Mobile control panel with safety foot switch and emergency stop button Dsdpfx Aozh Uuiekzokp - High performance and reliability - Various options available, e.g. small parts diverter, NC-controlled rear stop with intuitive control via touch screen, angle stop, sheet lifting device, etc. - Current CE conformity Options: - Pneumatic sheet lifting device with: - Selector switch for sheet return on the operator side or the rear of the machine - Integrated rollers for even and smooth removal of the cut material - Increased motor power for more strokes/min - Rear stop with lifting function - Extended support arm (1500 / 2000 / 3000 mm) - Extended front side stop (1500 / 2000 / 3000 mm) - Angle stop with scale - NC rear stop 800 mm controlled via ball screw using M15S or FATEK control Inquiry item! Shipping costs in individual offer.

Condition: used, Edwards Pearson Hydraulic Guillotine 4m, model V.E. SHEAR 6.5/4080, Dodpfxozh Rfqe Akzokp

Condition: good (used), Year of construction: 2005, sheet width 2560 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm distance between columns 2600 mm down holder 15 Stück no. of strokes max. 24 Hub/min oil volume 120 ltr. cutting angle 1.6 ° back stop - adjustable 750 mm Control PRG 911-1 Number of working hours ca. 370 h total power requirement 11.0 kW weight 4700 kg range L-W-H 3190 x 2100 x 1560 mm with only approx. 370 operating hours (!) Features: - Robust electro-hydraulic oscillating shear - Digital position display for electric backgauge * Backgauge travel X = 750 mm * Backgauge with backlash-free ball screw * Travel speed 100 mm/sec - 1x sturdy side stop Dodpfxszh N U Rj Akzjkp * With T-slot, flip-stop, and millimeter scale - 2x sturdy front support arms - Electric cutting length limiter * Cutting length limiter to increase strokes per minute - Manual cutting gap adjustment * centrally operated on the left side stand - front support plates - front finger/interference guard - jog mode with push buttons on the control panel - protective guard = safety device behind the machine - operating instructions (PDF)

Condition: used, functionality: fully functional, Year of construction: 2003, Hydraulic plate shear Manufacturer: GASPARINI, Type: CO 3006 Year of manufacture: 2003 Technical data Manufacturer: GASPARINI Type: CO 3006 Dodpfezh Id Rjx Akzskp Year of manufacture: 2003 Sheet width: 3050 mm Stand distance: 3200 mm Overhang: 510 mm Sheet thickness: 6 / 8 mm ST / VA 4 mm Rear back gauge: 750 mm Cutting angle: 0.5 - 2.5° Power: 7.5 kW Machine weight: approx. 9 t Dimensions: approx. L 3.65 x W 2.2 (plus support arms) x H 1.9 m Equipment • Controlled rear back gauge 1000 mm, can be swiveled upwards • Control system DELEM DAC150 • Ball rollers in the support table • Foldable finger guard • Front angle back gauge + support arm • Central cutting clearance adjustment • Automatic cutting angle adjustment • Pneumatic hold-down device • Cutting edge lighting • Rear guard with side protection grilles • Spare blades All information is without guarantee. A demonstration is possible at any time in our showroom.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2007, HYDRAULIC SHEAR LVD HD CS 31x13 Serial number: 34887 Year of manufacture: 2007 Dodpfx Ajzg Dp Tekzekp TECHNICAL SPECIFICATIONS Max. sheet thickness (St45): 13 mm Cutting length: 3100 mm Range of back gauge: 750 mm Min. cutting angle: 0.5° Max. cutting angle: 2.5° Min. number of strokes/min: 7 Max. number of strokes/min: 35 Min. blade clearance: 0.05 mm Max. blade clearance: 2.2 mm Motor power: 15 kW Weight: 8700 kg OPTIONS: Electrical adjustment of back gauge (1000 mm) with digital readout. Electrical adjustment of cutting angle. Adjustable blade clearance. With 90° square arm front support. Foot pedal. CE safety standards.

Condition: good (used), Year of construction: 1995, For sale is a good used guillotine shear from LVD. This machine was produced in Germany in 1995. Djdpfx Akozgu Rbszjkp guillotine shear LVD HST - C 40/6 Manufacturer: LVD Type: HST - C 40/6 Cutting capacity in steel 6,35 mm Maximum length 4050 mm Cutting angle 0.5 to 2 ° Cadence 10 to 45 strokes / min 7.5 kW motor Weight 9500 kg

Condition: excellent (used), Year of construction: 2012, Trumpf Trushear 5063 (2012) Guillotine Shear 3050x6mm Manufacturer: Trumpf Model: TruShear 5063 Year of manufacture: 2012 Condition: used, very good Dedpjzgu Nqsfx Akzskp Control: ELGO P50 Cutting length: 3050 mm Sheet thickness: 6 mm / 4 mm for stainless steel Cutting angle: 0.5 – 2.8° Blade gap adjustment: 0.05 – 0.72 mm Automatic cutting angle adjustment Automatic blade gap adjustment Automatic blade gap compensation Hold-down devices: 20 pieces Strokes per minute: 18 – 38 Backgauge: 10-1000 mm, adjustable Total power requirement: 11 kW Oil capacity: 140 L Dimensions (approx.): L 4.00 x W 1.67 x H 1.90 m Total weight: approx. 7.2 t Customs tariff number: 84615090 Sheet support device Sheet return device Small parts chute 3x support arms Light barrier Foot pedal Documentation

Condition: used, functionality: fully functional, Year of construction: 1997, machine/vehicle number: C 97 12 06, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, working width: 3,100 mm, sheet thickness (max.): 6 mm, back gauge adjustment: CNC-controlled, back gauge: 1,050 mm, overall weight: 6,500 kg, number of support arms: 2, Equipment: angle stop, Hydraulic shear – AMADA, GPX 630 model. Cutting length: 3100 mm x 6 mm, fully CNC controlled. Adjustable blade angle and blade gap, set by the computer after entering the material thickness and length. Sheet metal cutting range: 0.4 - 6 mm. CNC back gauge with a travel distance of 10 - 1050 mm, retraction, and programmable. Machine with automatic support for long sheets of cut metal at the rear. Raising and lowering rear back gauge. Machine weight: 6.5 tons. 2 supports and a square bar at the front of the machine. The shear is regularly serviced. The machine has been used sporadically for the past 10 years. Service documentation and the machine manual are available. Dksdpjzdzkcofx Akzjp If you have any questions or require further information, please send a message or contact us by phone.

Condition: excellent (used), Year of construction: 1985, guillotine shear with rear stop and stacker design: hydraulic cutting length: max. 3.000 mm cutting length (stackable): max. 1.000 mm Dodpfxezdnx He Akzokp cutting thickness: max. 6 mm

Condition: used, Adira GH0640 4000mm x 6mm Guillotine (2015) Maximum Mild Steel Capacity (450 N/mm²) 6.5 mm Dodpfezdgnzox Akzjkp Maximum Stainless Steel Capacity (700 N/mm²) 4.0 mm Cutting Length 4,050 mm Frame Gap 260 mm Blade Clearance Adjustment 0.05 – 1.1 mm Number of Hold-Down Cylinders 19 Backgauge Range 1,000 mm Cutting Angle (Rake Angle) 1° 3' Machine Length 4,980 mm Machine Width 2,840 mm Transport Width 2,180 mm

Condition: good (used), Year of construction: 2010, sheet width 4100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 9 - 26 Hub/min back stop - adjustable 10.0 - 750 mm down holder 22 Stk. oil volume 200 ltr. Djdpfxozcqy Ss Akzokp engine output 7.5 kW weight 8000 kg. range L-W-H 5145 x 2200 x 1750 mm From a maintenance workshop Very well-maintained / good condition With very few operating hours (!!) Current list price approx. 60.000 euros Special price upon request Features: - Robust electro-hydraulic, slide-guided sheet metal shear - LVD control panel centrally located on the front of the machine (left) - Electro-hydraulic cutting angle adjustment * Includes digital display of actual values - Manual cutting gap adjustment * via handwheel from the front (left) * Includes analog value display - Electro-motorized backgauge with ball screws * Includes digital actual position display * Rapid traverse is possible - 1x extra-long side stop 3,000 mm, with support foot - 1x long support arm - Ball-bearing recessed handles in the support table - Front finger guard - Rear sheet metal chute - Safety device - rear (protective grille) - 1x freely movable foot switch - Machine lighting at the front (custom-built) - Operating instructions

Condition: new, functionality: fully functional, Sheet metal width: 3060 mm Sheet metal thickness: 6 mm Stroke rate: 20 strokes/min Stroke: 750 mm Dkjdpfxezbbbkj Akzsp Motor power: 11 kW Oil capacity: 160 l Machine weight (approx.): 5,500 kg Dimensions: 3860 x 2560 x 1560 mm

Condition: good (used), Year of construction: 1991, Used plate shear from Safan Dsdpfxeza T Efs Akzokp Type VS 430 6 Capacity 4300 x 6 mm Electrically adjustable back gauge Adjustable shearing angle and blade clearance Pneumatic hold-down table at the rear

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, max. sheet thickness steel (450N/mm²): 6.5 mm max. cutting width: 3080 mm Dkjdpfxjzaip Hj Akzsp machine weight: 5600 kg Very good, ready-to-use condition.

Condition: used, total length: 5,500 mm, total width: 2,400 mm, total height: 2,100 mm, Colour: Yellow Weight: 21.000 kg - Documentation available: No - CE certificate present: No - Drive system: Conventional - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 5150 - Backgauge depth [mm]: 1000 - Transport dimensions: 5500mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 21000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dkedpey Uwp Ssfx Akzep Lukas van Rossum

Condition: used, Year of construction: 2008, total length: 4,900 mm, total width: 2,400 mm, total height: 1,750 mm, Colour: White Weight: 9.500 kg - Year: 2008 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 14418 - Drive system: Conventional - Control system brand: Elgo - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 11.0 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 4060 - Cutting speed [mm/min]: 12 - Backgauge type: Electric Dkjdpfx Akjy Tnzvezsp - Backgauge depth [mm]: 1000 - Sheet support system: Pneumatic - Finger guard: Safety light curtain - Angle adjustment: Motorized - Blade gap adjustment: Motorized - Table type: Fixed table - Options: Digital readout - Transport dimensions: 4900mm x 2400mm x 1750mm (l x w x h) - Transport weight [kg]: 9500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, control type: CNC control, actuation type: hydraulic, controller manufacturer: Amada, sheet thickness (max.): 6 mm, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, type plate available, Amada GX 630 +SE30 +STACKER FULL OPTIONS Shear GX630 Discharge conveyor + lift system + scrap bin SE30 Constant level stacker ENC 30 Dsdsy Sbu Hepfx Akzjkp This Amada guillotine shear comes equipped with a combined discharge conveyor, lift system, and scrap bin. At the rear, it features an original Amada discharge conveyor with material stacker. The system is frequency-controlled and maintains a constant drop height for material stacking. The machine is in very good condition and has only been used for thin sheet material. All documentation and service reports are available. Machine specifications: Cutting length: 3050 mm Max. thickness: 6 mm steel Control: Amada Automatic cutting angle adjustment Automatic cutting gap adjustment Backgauge: 1000 mm Lift system: pneumatic Dimensions (L x W x H): 3790 x 2230 x 1860 mm Weight: 6150 kg