Used Fermentative Room for sale (2,242)

Condition: used, Year of construction: 2004, gebraucht 2004 4540 Itjdewirmnopfx Aaner prompt, Zwischenverkauf v Österreich 23700 € 1 19900 € 63 - 3150 (18) U/min 700 x 500 x 500 mm 900 x 500 mm 6.6 kW 2150 mm 2220 mm 2120 mm 2550 kg 500 kg 100 mm CNCHeidenhain TNC 410 18. mech. feeds with rapid travel in X,Y,Z axes ball screw spindles toolmaker accuracyDIN 8615 hyd. tool clamping with holdersSK40 vertical und horizontal vertical spindle+/- 30° swiveling swing out device digital 3D edge finder work area protection coolant equiptment aut. central lubrication fixed angle table with 10 t-slots chip collecting tray machine lamp users manual in GERMAN + CE COMPLIES WITH THE CURRENT INDUSTRIAL SAFETY REGULATIONS (AMVO & UVV)

Condition: used, Year of construction: 2011, Used Frozen Orange Processing Line The Frozen Orange Processing Line by Navatta Group is an industrial processing solution engineered for handling frozen citrus products with high reliability and safety. Built in 2011 and configured under model QE11056, this second hand line is suitable for integration within beverage production and industrial packaging environments where pre-processing of fruit inputs is required. Designed for continuous-duty operation, it provides robust automation, comprehensive operator protections, and compliance with stringent European safety standards. Its electrical and control architecture supports stable performance and straightforward integration into a complete used bottling line or broader food and beverage processing workflow. Manufactured by Navatta Group engineering, the line is tailored for frozen orange processing applications, with the flexibility to interface with downstream equipment such as filling, labeling, capping, and packaging machines. It is an optimal choice for producers seeking dependable performance in industrial packaging contexts, enabling efficient preparation of fruit-based inputs for further transformation within beverage production lines. Technical Specifications & Performance Data Manufacturer: Navatta Group Model: QE11056 Year: 2011 Primary voltage: 400 V Itsdox H Tcxopfx Aanjr Auxiliary voltage: 24 V Frequency: 50 Hz Installed power (absorbed): 47 kW Maximum current: 93.1 A Short-circuit current rating (Icc): 40 kA Line type: Frozen orange processing line Advanced Automation & Control Systems The line features a dedicated electrical panel with clearly identified electrical characteristics and operator controls. Automation is supported by integrated control and safety logic designed to minimize risk and streamline operation. The system provides: Operator control panel with descriptive indicators and alarms Structured safety devices and interlocks for guarded operation 24 V auxiliary control circuits for reliable low-voltage signaling Industrial-grade electrical build complying with EN 60204-1 Designed for quick parameter adjustments during format or process changes Production Line Integration Capabilities This line is engineered to be positioned inline with upstream and downstream equipment. It can operate as part of a broader used bottling line or food processing cell, supporting material handling and transfer to filling, labeling, capping, and packaging stations. Integration features include: Inline positioning with conveyor and utility connection readiness Compatibility with industrial packaging workflows Process parameters adjustable for product handling requirements Suitable as a pre-processing stage in beverage production environments Machine Condition & Maintenance History The equipment is supported by a comprehensive user and maintenance manual, including electrical schematics and functional specifications.

Condition: used, Year of construction: 1989, x-travel 750 mm y-travel 270 mm z-travel 300 mm table-size 900 x 350 mm spindle taper ISO 40 spindle turning speed range 18-1600 U/min Number of working hours 2543 h digital readout 3-Achsen Heidenhain total power requirement 10 kW weight of the machine ca. 1570 kg dimensions of the machine ca. 2,60 x 3,80 x 2,35 m Iedpfx Aasw Hlzgenetr Universal milling machine Berlett FE1-10, year of manufacture 1989 Very robust tool milling machine with many accessories. Various vices. Manual rotary table Various holders and milling cutters Coolant tank Full tool cabinet with milling cutters etc.

Year of construction: 2018, condition: new, Demonstration machine Year of manufacture: 2018 With full warranty Features and technical data: Functionality · Room geometry capture via laser measurements · Total station function: standard measurement points can be augmented by custom measurement points · Complex 360° panoramic capture from each room scan · Image and measurement functions for every detail · Complete photographic documentation · Preview panorama display via HottScan app · Data transfer via USB stick or WiFi with app Technical Data Overview Angle meter features Measurement range: Horizontal 347°, Vertical 180° Accuracy: 0.01°, relative Laser distance meter features Type: Coaxial, visible red laser Measuring range: 0.05–80 m Laser class: 2 Laser type: 650 nm; < 1 mW Laser spot diameter (at distance): 5 m: 4 mm; 10 m: 8 mm; 50 m: 28 mm x 14 mm Accuracy: +/- 1 mm, depending on distance, surface & light conditions Operation User interface: Control panel with soft-touch keys and LED lighting/Display of battery capacity/status and error indicators Data exchange Flash memory: 32 GB, USB and WiFi Range: 50 m (depending on environment) Power supply Power adapter: 14.8 V, 1.2 A, with a cut-off voltage of 16.8 V, primary voltage 100 V – 240 V, 19.5 VA, 50/60 Hz Battery: operating range between 11.2 V and 16.8 V Runtime: Up to 11.5 hours, depending on use of LED lighting; approx. 8 hours under typical use Environmental Conditions Operating temperature: operation and battery charging: +0° to +40° C Storage temperature: -20° to +50° C Dust and moisture: IP 40 Special Features · Hot Swap: the replaceable battery can be exchanged during operation in just seconds · Integrated lighting assists in poor lighting conditions · Mobility: Lightweight (approx. 4.7 kg) combined with a foldable tripod makes the HottScan HS-1 a compact tool for on-site inspection and maintenance jobs Your Advantages · Mobility (light weight) and long battery life · Avoidance of multiple on-site visits · Battery change within seconds · Free loan device in case of servicing from the 3rd business day Includes HottScan Room Modeler full version Software for generating a 3D room model from scanner data, export of quantity data in CSV format, geometry export in DWG/DXF format with layer structure, and Collada format Performance scope · Simple room modeling from first-person perspective · Export of quantity data in CSV format · Geometry export: DWG/DXF format with layer structure and Collada format with textures; continual post-processing possible in all 3D CAD programs Includes transport case for HottScan 3D room scanner · Weather-, corrosion- and temperature-resistant aluminum sheet · Lid and bottom profiles welded at the seam · 2 stainless steel hinges · 2 lever-lock clasps · Continuous rubber seal providing dust and splash water protection · Temperature resistance from -40°C to +80°C Interior · Egg-crate foam in the lid Ijdpfx Aasw I Uizsnotr · Foam insert in the base with product-shaped cut-outs Availability: Short notice Location: Flörsheim

Condition: good (used), Year of construction: 2004, functionality: fully functional, Technical details x-travel 620 mm y-travel 420 mm z-travel 400 mm Control Heidenhain TNC 410M table surface area 800 x 400 mm tool taper ISO 40 spindle turning speed - stepless 50 - 4000 U/min main drive motor 5,5 kW weight of the machine ca. 2,1 t Ijdpfx Aajx D Ucxsnstr Additional information * CNC control HEIDENHAIN TNC 410M * Coolant equipment * Machine lamp

Condition: used, Year of construction: 2003, x-travel 350 mm y-travel 240 mm z-travel 340 mm b-axis -15 / +105 ° c-axis 360 ° control SINUMERIK 810 D SIEMENS spindle taper SK 40 spindle turning speed range 20 - 6.300 U/min table-size Ø 400 x 290 mm table load 100 kg feeds -stepless- 5.000 mm/min rapid traverse 5,0 m/min power capacity 6,3 / 10,0 kVA voltage 400 V Iodpfxjx A H R Se Aanotr total power requirement 15,0 kVA weight of the machine ca. 1,6 t dimensions of the machine ca. 1,75 x 1,60 x 2,10 m coolant tank 1,10 x 0,30 x 0,40 m - Serial-No.: 11065356904 - Machine ON: 37,474 h - Spindle ON: 1,428 h - Control: Sinumerik 810 D / Shopmill - Electronic handwheel - machine table pivotable - Manual rotation/pivotation of machine table with DRO display on CNC screen - Swivel range b-axis -15° / +105° - Swivel range c-axis 360° - Coolant device - Siemens CCU-Unit changed Dec.2025

Condition: used, Year of construction: 2023, gebraucht 2023 4546 prompt, Zwischenverkauf v Taiwan 32800 € 1 65 - 2600 U/min ISO 40 420 x 220 x 380 mm 840 x 390 mm 2.2 kW 1600 mm 1700 mm 2000 mm 1145 kg 840 x 390 mm 1000 mm/min 5 14 x 63 mm 200 kg 420 mm 220 mm 380 mm 0 - 600 mm/min. 0 - 600 mm/min. 65 - 2600 90 - 310 mm 65 - 2600 +/- 90° ° 100 mm manuell 2,2 kW 950 x 250 mm 90 - 310 mm 100 - 480 mm demo machine / mint condition net price (price for new machine € 41.100,00) swiveling operating panel 3 axes digital read out Fagor 40i Innova motor for horizontal- and vertical spindle: 2,2 kW feed motors with inverter for X/Y/Z: 0,35 / 0,35 / 0,75 kW ball screw spindles for X/Y/Z axes manual gear box for spindle speeds 1 pc. long milling arbor 27 mm 3 pcs. recustion sleeves (MK1, MK2, MK3) 1 pc. drawing bar ISO40 for horizontal or vertical spindle spindle protection with switch table safety guard with doors with switches outer arbor support for horizontal spindle LED work lamp automatic lubrication for X/X/Z guidways safety hand wheels for X/Y/Z axes coolant equipment with chip tray covers for X/Z axes level pads and bolts Itodswirdgjpfx Aansr tool box with tools operating manual in English or German according to CE rules

Condition: new, Product description: ROOMLINE powder coating booths are designed for paint recycling and prevention of environmental pollution during the powder coating process of large parts. It works on the principle of manual painting of products suspended on a rail or placed on a trolley.It is integrated into manual painting systems. Suitable for bar transfer systems. There are options to bring the products into the cabin with the trolley hanging above or on a bottom trolley. The cabin floor is left as the factory floor according to the demand, or the cabin is placed on a chassis and floor suction is provided. Available in floor, side wall or rear wall suction versions.The front of the cabin is optionally produced with a door or open. Depending on occupational safety and European standards, it can be equipped with equipment such as emergency exit door, fire extinguishing system, camera monitoring, ex-proof lighting and suction system, inverter motors. Cabinet construction consists of sandwich panels and steel structures in various thicknesses according to the project. Attachable Dust Collection Systems: - Jet-Pulse Filter System - Mono Cyclone - Multi Cyclone Advantages: - Easy to Use - Quick Color Change - Easy assembly and disassembly - Cleaner environment Ijdpfxsggyigs Aanjtr

Condition: good (used), functionality: fully functional, X = 400 mm, Y = 300 mm Infinitely variable feed rates, Speeds stepped from 35 to 2200 rpm Spindle mount ISO 40 • Milling head with boring quill • Universal rotary and tilting table Ijdpfx Asx Hqufoanetr

Condition: used, Used syrup room with pasteurizer Alfa Laval This second hand Syrup Room is a complete processing section designed for the preparation of concentrated base syrups and finished syrups for beverage production. Engineered for integration upstream of a premix and an isobaric filler, it supports efficient industrial packaging workflows in a used bottling line. Manufactured and supplied by BBM Service with components from recognized European brands, it is ideal for beverage production environments that require reliable sugar dissolving, thermal treatment, and hygienic storage prior to mixing, carbonation, and filling. The system covers the full syrup preparation sequence: simple syrup creation from treated water and sugar, finished syrup blending with concentrates, acids, colors, and flavors, and hygienic storage in stainless steel tanks. A dedicated pasteurizer helps ensure product stability, while mixers and pumps support consistent, repeatable processing. This Syrup Room is well suited for soft drink formulations such as cola, tonic, and other flavored carbonated beverages, and it integrates seamlessly with premix units that add CO2 just before the filling machine. The plant layout and component selection make it a practical solution for upgrading or expanding a used bottling line in the beverage production sector. Technical Specifications & Performance Data Sugar dissolver: AICMA Pasteurizer: Alfa Laval Storage tanks (finished/simple syrup): 4 x 4,000 L Cavalzani Storage tanks (finished/simple syrup): 3 x 2,000 L Bertuzzi Mixers and pumps: Included for circulation, transfer, and blending Process materials: Treated water, sugar/sweeteners, fruit concentrates, flavors, additives Construction: Stainless steel AISI 304/316 process equipment Itjdjxywg Sjpfx Aaner Cleaning: CIP-ready design for sanitary cleaning in place Advanced Automation & Control Systems The Syrup Room features a centralized control panel with analog/digital selectors for process management, enabling operators to supervise dissolving, thermal treatment, storage, and transfer operations. Dosing can be achieved using precision pumping and flow control to maintain recipe accuracy. Hygienic design, sanitary valves, and instrument connections support repeatability and quality. The configuration is suitable for integration with plant-level automation and recipe control, with clear operator interfaces that simplify changeovers and routine adjustments while supporting safe and reliable operation. Production Line Integration Capabilities This processing plant is designed to feed finished syrup to a premix unit, where it is blended with treated water and CO2 immediately before the isobaric filler. It can be integrated inline with existing beverage production and industrial packaging equipment and is compatible with used bottling line layouts handling both PET and glass bottling downstream.

Condition: good (used), Year of construction: 1988, functionality: fully functional, Technical details x-travel 300 mm y-travel 160 mm z-travel 290 mm table surface area 210 x 600 mm tool taper SK 40 spindle turning speed range (16) 40 - 2000 U/min feeds -stepless- 5 - 500 mm/min rapid traverse 1,2 m/min spindle motor 1,5 / 1,9 kW total power requirement 9,5 kVA weight of the machine ca. 730 kg dimensions of the machine ca. 2000 x 2200 x 1655 mm Additional information The machine is in very good condition and comes from a training workshop. Equipment: Iedpfjx D T Nqox Aanjtr Safety cover and LED lamp retrofitted in 2016 3-axis active digital readout made by Heidenhain Fixed angle table Coolant equipment

Condition: used, Year of construction: 1982, x-travel 300 mm y-travel 160 mm z-travel 340 mm feeds -stepless- 5-500 mm/min rapid traverse 1200 mm/min spindle turning speed range 40 - 2000 U/min tool taper Normkegel 40 table length 600 mm table width 120 mm voltage 380 V frequency 50 Hz rated current 13 A weight of the machine ca. 0,750 t dimensions of the machine ca. 1,8 x 1,5 x 1,8 m Iodpevvnfujfx Aanotr DESCRIPTION Machine incl: active three-axis digital readout HEIDENHAIN documentation various tool holders Machine vice etc.

Condition: used, Locker changing room 1800 x 1200 x 500 RA2221 Manufacturer: unknown Itsdpfsu Sphtox Aansr width: 1200 mm Height: 1800 mm depth: 500 mm different versions available 3 x 2, 2 x 2, 3 x 4 and 2 x 4 (horizontal x vertical) lockers benches also available Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: good (used), Year of construction: 2001, Heidenhain TNC 310 cnc control electronical hand wheel coolant device Technische Daten: Längsweg (X-Achse) / X-travel longitudinal 600 mm Querweg (Y-Achse) / Y-travel cross 400 mm Senkrechtweg (Z-Achse) / Z-travel vertical 400 mm Werkzeugaufnahme / spindle taper SK 40 Drehzahlbereich / spindle speed range 60-5000 UpM Vorschub / feed 0-2000 mm/min. Eilgang längs + quer / rapid feed x/y 5 m/min. Eilgang senkrecht / rapid feed z 4 m/min. Antriebsleistung gesamt / drice capacity 7 kW Gewicht ca. / weight ca. 2000 kg Iodpfx Aoit Tr Toanstr Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 2006, x-travel 500 mm y-travel 450 mm z-travel 400 mm control iTNC 530 Heidenhain turning speed range - main spindle 20 - 10.000 U/min power capacity - main spindel 9 / 13 kW Torque 57 / 82 Nm tool taper SK 40 table surface area 630 x 500 mm Tilting area -5 / +110 ° max. table load 200 kg T-slots 14 H7 T-slot - distance 63 mm C-Axis +/- 360 ° rapid travel ( X / Y / Z ) 12 m/min feed speeds 10.000 mm/min Itedpfx Aaevanqxjnjr Tooling 16 pos. max. tool weight 6 kg max. tool length 300 mm max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm tool taper SK 40 total power requirement 17 kVA weight of the machine ca. 3,6 t dimensions of the machine ca. 3,0 x 3,0 x 2,5 m Tool Room Milling Machine - Universal DECKEL MAHO - DMU 50 - 5 Axis (3+2) - only 10.071 Spindle Hours - WITHOUT tools

Condition: used, Year of construction: 1995, x-travel 300 mm y-travel 200 mm z-travel 350 mm table surface area 700 x 270 mm taper in main spindle ISO 40 turning speeds 8: 150 - 1660 U/min turning speed range - horizontal 8. 110 - 1230 U/min feeds 8: 25 - 285 mm/min weight 900 kg quill stroke 60 mm total power requirement 3,7 kW Itedpovxllkofx Aansr range L-W-H 1,3 x 1,38 x 1,65 m Universal tool milling machine with 2 axis digital display and swiveling vertical milling head with quill, fixed + swiveling table, slotting head, automatic feeds and rapid trverse in all three directions. Machine from a repair shop. The digital display shows 2 axes because the third axis display is defective. All three scales are OK and you can choose which of the 3 axes should be connected. Machine with a just low special price. Machine dealer with own stock of 1600 m².

Condition: good (used), functionality: fully functional, machine/vehicle number: 3500072, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 3,150 rpm, spindle speed (min.): 63 rpm, mount diameter: 40 mm, table length: 800 mm, table width: 400 mm, total height: 2,100 mm, total length: 2,500 mm, total width: 2,000 mm, overall weight: 2,000 kg, INTOS FNGJ 40 universal tool milling machine Ijdpfxexx Nk Hs Aanotr - Tool holder: SK 40 - Table with 8 T-slots The machine is equipped with a three-axis HEIDENHAIN digital readout, as well as two workshop drawer cabinets matching the machine, complete with accessories and tools. This item comes from a training workshop. FCA D-73235 Weilheim Teck, loaded onto truck.

Year of construction: 2025, condition: new, functionality: fully functional, The Blasting room (also called a sandblasting room or shot blasting room) is an enclosed area designed for cleaning, roughening, or surface preparation of materials such as metal, concrete, stone, or wood. Inside the room, abrasive materials (like quartz sand, steel grit, aluminum oxide, or glass beads) are propelled at high speed using compressed air to remove rust, paint, scale, or dirt from the surface and achieve the desired roughness. Main Components of a Sandblasting Room Blasting Chamber / Room: A steel-structured enclosure with wear-resistant lining to protect the interior walls. Blasting Machine (Nozzle System): Mixes compressed air and abrasive media, then directs it toward the workpiece. Dust Collection System (Filter Unit): Removes airborne dust and maintains clean air inside the room. Abrasive Recovery System: Collects used abrasive material, cleans it, and recycles it for reuse. Operator Equipment: Iodpfx Ajxr Am Usanotr The operator wears protective gear, including a helmet with air supply, gloves, and a blast suit. CODE DIMENSIONS OF SANDBLASTING AREA (L x W x H) mm KO - 1 4.000 x 4.000 x 3.000 KO - 2 6.000 x 3.000 x 3.000 KO - 3 6.000 x 5.000 x 5.000 KO - 4 10.000 x 5.000 x 5.000 KO - 5 12.000 x 5.000 x 4.000 KO - 6 15.000 x 5.000 x 5.000 KO - SPECIAL 27.000 x 18.000 x 9.000

Condition: good (used), Year of construction: 1992, Travel X/Y/Z: 1000/500/500 mm Control: Heidenhain TNC 415 B Spindle: SK 40 Speed range: 0 - 5000 rpm Coolant device Itjdotmtvljpfx Aansr Universal milling head Can be swiveled and manually indexed via scale, can be swiveled away for horizontal machining

Condition: good (used), Year of construction: 1997, functionality: fully functional, feed length X-axis: 450 mm, feed length Y-axis: 300 mm, feed length Z-axis: 350 mm, 3-axes digital read out Iedpfx Aowyit Hoanotr horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: used, Table size 900 x 460 mm X/Y/Z - 600/400/420 mm Spindle speeds 20-4000 rpm Itsdpsl Dvx Eofx Aansr Spindle taper ISO 40 Hydraulic tool clamping Quill stroke in vertical head Vertical head swivels +/- 90 deg. Tool changer w/32 stations Control: Heidenhain TNC 407 Equipped with: Vice 19 tool holders Coolant

Condition: used, Year of construction: 1999, x-travel 600 mm y-travel 525 mm z-travel 500 mm table surface area 1000 x 543 mm spindle taper SK 40 spindle taper DIN 69871 spindle turning speed - stepless 20 - 12.000 U/min feed X/Y/Z-axis 20 - 10.000 mm/min Ijdpstqqmhefx Aanjtr rapid traverse X/Y/Z axis 18 / 18 / 15 m/min table load max. 350 kg control HEIDENHAIN MillPlus milling-head swivable +/- 90 ° total power requirement 26 kVA weight of the machine ca. 4,2 t dimensions of machine L x W x H 2,95 x 2,1 x 2,26 m Accessories: various tool fixtures, coolant

Condition: good (used), functionality: fully functional, Infinitely variable feeds on all axes Quill stroke 60 mm Iedpfx Aox A S Dqjanjtr Table surface 600 x 250 mm Spindle speeds 45 - 1950 rpm Feeds 10 – 470 mm/min...infinitely adjustable... : Longitudinal travel (X) 315 mm Cross travel (Y) 180 mm Vertical travel (Z) 320 mm .

Condition: used, -External dimensions: 2600x2900x2110mm -Internal dimensions: 2400x2700x1950mm -Wall thickness: 80 mm Itsdpfxjx Eyhfs Aanor -Temperature: -2+8 ºC / -18-23 ºC -Refrigerant: R452A -Climate class: 5 -Pre-assembled refrigeration unit on the panel -Automatic condensate water evaporation -Internal lighting -Panel finish in pre-painted sheet metal, specially designed for food use, light grey colour -300mm gaps with panels of 300, 600, 900 and 1200mm -Panel interlocking system with double-latch hooks -Rounded doors and interior corners cut at 45º -Ergonomic handle with lock and safety release system -Pressure balance valve -Stainless steel floor with non-slip surface -Reversible door, self-locking at 90º, available in 2 sizes, with clear opening of 600 and 700mm -Hinges with sloped system -Insulation in CFC-free polyurethane, high-pressure injected, with density 41 Kg/m³

Condition: used, Year of construction: 1985, machine/vehicle number: 294, x-travel:400 mm y-travel:190 mm z-travel:310 mm table clamping surface:280 x 750 mm Reach of the vertical spindle:115-575 mm Iedpfxjvcf Hpo Aanjtr feed steps:16 feed range:11,2-355 mm/min tool taper:SK 40 speed steps :16 speeds::56-1800 min-1 total power requirement:2,2 kW dimensions of the machine ca.:1550 x 1250 x 2000 mm weight of the machine ca.:1200 kg