EIBL GmbH

Condition: not inspected (used), Year of construction: 2009, operating hours: 29,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, total length: 7,755 mm, workpiece height (max.): 40 mm, working height: 950 mm, controller model: PowerControl PC22, TECHNICAL DETAILS Feed rate: 18 - 25 m/min Maximum feed rate with FK11: 20 m/min Working height: 950 mm Minimum workpiece width (for workpiece thickness 12-22 mm): 60 mm (depending on workpiece length) Minimum workpiece width (for workpiece thickness 23-40 mm): 105 mm (depending on workpiece length) Workpiece protrusion: 30 mm Workpiece thickness: 12 - 40 mm Edging material (coil): 0.3 - 3 mm Maximum edge cross-section (PVC): 135 mm² Maximum edge cross-section (veneer): 100 mm² Maximum coil diameter: 830 mm Edging material (strips): 0.4 - 20 mm Maximum edge cross-section (strips): 900 mm² MACHINE DETAILS Control system: PowerControl PC22 Pneumatic connection: 7 - 8 bar Total length: 7,755 mm Operating hours: approx. 29,000 h EQUIPMENT Workpiece support with scissor-design and roller support, extendable to 1000 mm Automatic infeed guide adjustment Fixed stops on left side Pneumatically controlled infeed lock Top pressure via driven composite V-belt Electrical height adjustment Workpiece transport unit via transport chain with rubber coating Separating agent spray unit, top/bottom Joint trimming unit 2 x 3 kW Gluing unit A20 with 2 rollers, comprising workpiece preheating, Quickmelt application unit with quick-clamping system, 2-roller magazine, pressure zone C (automatically adjustable with 1 pre-press roller and 6 post-press rollers) Trimming unit HL84 0.8 kW, with automatic chamfer/straight adjustment and pneumatic flush/excess trimming adjustment Pre-milling unit 1.5 kW, pneumatic adjustment between flush and excess milling Ncsdpfxjyc S Hao Adwol Contour milling unit FK11 with automatic adjustment from chamfer to radius milling Profile scraper PN10 (with pneumatic side retraction) Finishing unit (with pneumatic side retraction), consisting of glue joint scraper and buffing unit Remote control Workpiece guide for FK device Note: Container loading and seaworthy packaging by the seller is not possible.

Condition: not inspected (used), Year of construction: 2008, operating hours: 33,000 h, functionality: unexamined, feed rate X-axis: 25 m/min, workpiece height (max.): 60 mm, working height: 950 mm, controller model: Power Control PC22, TECHNICAL DETAILS Ncodpfjyc Sr Asx Adwjl Feed rate: 18 - 25 m/min Working height: 950 mm Minimum working width at workpiece thickness of 22 mm: 55 mm Minimum working width at workpiece thickness of 60 mm: 100 mm Workpiece overhang: 30 mm Workpiece thickness: 8 (12) - 60 mm Edging material, strip max.: 0.4 - 20 mm Edge cross-section, strip max.: 900 mm² Edging material, coil: 0.3 - 3 mm Max. edge cross-section for PVC: 135 mm² Max. edge cross-section for veneer: 100 mm² Max. roll diameter: 830 mm MACHINE DETAILS Control system: Power Control PC22 Pneumatic connection: 7 - 8 bar Operating hours: approx. 33,000 h EQUIPMENT Continuous machine frame for mounting processing units Workpiece support with roller rail, extendable approx. 800 mm Glue roller drive on feed stop Glue pot lift-off at feed stop Glue pot clamping, workpiece actuated Infeed fence automatically adjustable Infeed lock pneumatically controlled Infeed device with 2 rollers Infeed extension 500 mm Automatic pressure zone adjustment Sliding carriage Pre-installed for Boomerang ZHR05 return system Workpiece support in extended scissor design Operating data collection Electric height adjustment Fixed stop on left side Workpiece transport system Top pressure Separating agent spray unit Jointing cutter unit, 2 x 3 kW Gluing station A20 Basic for coil material up to 3 mm and strip material up to 20 mm, with melting unit with granulate tank and quick-change system Cross-cutting unit, 2 x 0.8 kW, with pneumatic adjustment Slip agent spray unit Pre-milling unit 1.5 kW, pneumatically adjustable Profile trimming unit FK13, 2 x 0.4 kW Universal milling unit 4 kW, controlled, with stepless axis Multi-finishing unit MN21 automatic Finishing unit FA11, with finishing station, cleaning agent application, and buffing unit, pneumatically adjustable Noise protection Spare position for additional processing units Note: The machine is sold without consumable tools. Container loading and seaworthy packaging by the seller is not possible.

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, Single-Sided Edgebander Homag Edgeteq T-200 / Optimat KTD 720 Min. panel height: 10 mm Max. panel height: 55 mm Min. panel length: 180 mm Min. panel width: 30 mm Njdpfx Ajyc Sh Rodwjcl Min. edge thickness: 0.4 mm Max. edge thickness: 3 mm Max. feed speed: 9 m/min Coil magazine Gluing system Hot-melt glue pot Control system with touch display

Condition: good (used), Year of construction: 2020, functionality: fully functional, Heavy duty edgebander EDGETEQ S-380 (HOMAG) in rich configuration suitable for custom made and series production. Machine is equipped with MULTIRADIUS aggregates (ABS 1mm, 2mm + thin edge) with electronic adjustment from the control panel. Main technical parameters: - feeding speed: 8-18 m/min (max. 14 m/min during rounding) - panel thickness: 10-60 mm Equipment and configuration of the machine: - control panel (color LCD screen) - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter diam. 100 mm) - glue pot with roller (EVA/PUR glue) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit with pneumatic tilting of the blades - radius trimming unit - 2 motor rounding unit - radius edge scrapers - cleaning spray Njdpfx Adjyc Ntqjwocl - glue scrapers - brushes Production year: 2020 Status of the machine: good Availability: cca from April 2026

Condition: excellent (used), Year of construction: 2000, operating hours: 845 h, functionality: fully functional, Machine in top condition (very little use) Ncjdpfxeyc Hp Ne Adwsl Machine available calendar week 12/26 Panel thickness: 6 - 45 mm (up to 50 mm with reduced edge cross-section) Coiled material: 0.4 to 3 mm Strip material: 0.4 - 8 mm Minimum workpiece width: 60 mm Minimum workpiece length: 180 mm Feed speed: 11 m/min 1901 Edge feeding for coil and strip material Guillotine shear: 0.4 - 3 mm 1906 M Adhesive application system for EVA & PUR glue with sensor-controlled nozzle adjustment; heat-up time approx. 4 - 5 min 1913 Pressure unit: first roller driven, two subsequent pressure rollers 1918 End trimming unit 3 x 0.35 kW, swiveling 0–10° 1942 M Multifunctional milling unit 2 x 0.6 kW, pneumatically adjustable for flush trimming, 15° bevel, radius up to 3 mm 1929 Scraper unit for radii up to 3 mm, pneumatically adjustable 1940 Buffing unit Total length: 4130 mm Electrical connection: approx. 5.5 kW Weight: approx. 1250 kg

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Equipment and technical specifications: - Base machine with manual pressure bridge adjustment - Extendable workpiece support - Joint milling unit FG 201 with 2 milling heads Nodpfxeyczi Dj Adwocl - Single edge feeder Automatic transport for coil and strip material - Glu Jet GJ 301 adhesive application system Automatic glue height adjustment (sensor nozzle) - Pressure unit 1912-3 pneumatic - End trimming unit 1918 (60 mm) pneumatic - Extraction hoods for end trimming unit - Multifunctional milling unit FR 201 - Corner rounding unit 1832 for edge thickness up to 3 mm - Scraper unit 1929 - Chip collection box - Surface scraper 1964 - Buffing unit 1940 - Complete spray device 1856 Minimum workpiece length: 160 mm Workpiece thickness: 60 mm Edge thickness: 0.4–6 mm Feed speed: 10 m/min Total length: 4630 mm Weight: 1250 kg The extraction bridge shown in the pictures is not included in the scope of delivery! Availability: short-term Storage location: Flörsheim

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 0-261-07-5143, edge thickness (max.): 12 mm, The machine is overall in very good condition. An on-site demonstration is not a problem. This machine is still in full operation. Ncodpfjycxgaex Adwsl

Condition: excellent (used), SCM K260 EVO edgebander Pre-milling cutters, Glue application with roller, Tank features quick-change option Pneumatic pre-cut guillotine, Pressure rollers, Trimming saw for finished cut, Top and bottom milling unit R1 – R2, pneumatically adjustable Profile scraper, pneumatically engaged Flat scraper, pneumatic Machine length: 340 cm, Max. workpiece height: 60 mm, Max. edge thickness: 3 mm, Used machine, in very good condition. Ncedpfeycwgfsx Adwsl Inspection possible before purchase. Only 11,500 meters processed.

Condition: used, • Holz Her Auriga 1308 XL FÜ + PU • Compact design - edge thickness 0.4 - 8 mm • Edge-Control PPC 231 touchscreen PLC control • Pre-milling unit for trimming prior to gluing section • Fully automatic edge magazine for both rolls and strips • GLU JET glue application station with cartridge + PU bonding • Glue application via nozzle technology • Workpiece height 6-65 mm • Automatic glue height adjustment • 1912-3 pneumatic pressure unit • 1918 pneumatic end trimming unit for roll and strip material up to 8 mm edge thickness • Pneumatic adjustment for trimming saws from 0-10° angle • 1827 MOT 4 milling unit for flush trimming 8 mm, radius milling, bevel milling - 15° 1827 MOT NC axes controlled via operator panel • 1832 pneumatic corner rounding unit for workpieces up to 3 mm edge thickness in throughfeed • 1929 MOT2 scraping unit for bevels and radii with 2 scraper holders, NC axes controlled via operator panel • Surface scraping unit – finish • Buffing unit - polishing • Spray system at infeed and outfeed • Complete set of tools included • First delivered in 2013 Nodpfx Adjycq Dwowocl • Machine is FUNCTION TESTED and in TOP CONDITION • Available from stock in Lieboch

Condition: ready for operation (used), Year of construction: 2009, This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information. • Configuration/Features: • Joining milling • Gluing unit for EVA hot melt adhesive • Pressure zone • Cutting unit • Copy milling • Scrapers • Buffing unit Additional equipment Nsdpfx Adeychduswjcl • Workpiece returning system: LIGMATECH

Condition: ready for operation (used), Year of construction: 1995, This LEONHARD KURZ Fürth KTF 70737L was manufactured in 1995. It features a Mikromat stretch control, a fixed stop side on the left, and an insertion table for angular insertion of long cross pieces. It includes two grinding units for straight edges and a KURZ embossing unit with unwinding and winding capabilities. Consider the opportunity to buy this LEONHARD KURZ Fürth KTF 70737L edgebander. Contact us for more information. Njdoycg Ulspfx Adwjcl • Control: Mikromat stretch control • Stop side: Fixed on the left • Grinding: 2 x straight-edge grinding units, overall oscillating • Chamfering: VZK chamfer grinding units for upper and lower chamfer • Note: Free space available Additional equipment • KURZ embossing unit with unwinding and winding unit, incl. 3 hot embossing rollers • Insertion table for angular insertion of long cross pieces • Manually adjustable feed guide with plastic roller strip

Condition: used, Year of construction: 2002, functionality: fully functional, HOMAG Optimat KL79 A20/S2 (2002) – Full Configuration The edge banding line is in satisfactory working condition, fully operational and ready for production. Ncjdpfxeycg D Ts Adwol Installed Units: • A20/S2 gluing station (edge thickness up to 20 mm) • Edge feed magazine • Front/rear end trimming units (two saw modules) • Top and bottom trimming units • Corner rounding units (two heads) • Profile scraper units (top/bottom) • Glue joint scraper • Buffing/polishing units • Pneumatic control and vacuum extraction system Technical Data (from manufacturer specifications): • Feed speed: 18–24 m/min • Edge thickness: 0.3–20 mm • Workpiece thickness: 12–60 mm • Minimum workpiece width: 55 mm (22 mm thickness) / 100 mm (60 mm thickness) • Machine length: 10,115 mm • Weight: ~6,200 kg • Power supply: 400 V, 50/60 Hz • Compressed air: 8 bar

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, workpiece height (max.): 55 mm, edge thickness (max.): 12 mm, height adjustment type: pneumatic, tilt adjustment saw blade: 10 °, We are offering this very well-maintained HOLZ-HER SPRINT 1310 edge banding machine, year 2005, including Ott Rondomat. Manufacturer: HOLZ-HER Model: SPRINT 1310 Year of manufacture: 2005 Ncedpfx Adsycgabewjl For sale: Service-maintained Holz-Her Sprint 1310 edge banding machine Fully functional! Heavy-duty version – edge thickness 0.4 – 12 mm PLC screen control Fully automatic edge magazine for rolls and strip material Gluing station with cartridge and PU bonding Automatic tracing nozzle Workpiece height 6-55 mm End trimming unit Adjustable mitre from 0-10° on the trimming saws Milling unit for flush trimming up to 12 mm and radius milling Scraper unit for chamfer and radius with 2 pneumatically operated scraper holders Surface scraper unit – finishing Including Ott Rondomat for edge processing

Condition: good (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 200-11.005.13, total length: 4,185 mm, total width: 1,378 mm, overall weight: 2,200 kg, power: 11 kW (14.96 HP), pressure: 6 bar, Types: PERFECT 710 glue tank unit, joint milling unit, crosscut saw unit, edge and radius milling unit, grooving unit, corner rounding unit, polishing unit Njdjycfygopfx Adwecl

Condition: used, Edge finishing machine Rehnen Type KBA for automatic processing and rounding of edges on wood and panel materials. The machine is suitable for precise grinding, deburring and rounding of workpiece edges and enables a consistently high surface quality. Ideal for carpentry, furniture construction and industrial wood processing. Includes spare abrasive belts and cutters. workpiece height: 20-90 mm Ncedpfx Adoyb Sdcjwjl Unit 1: Grinding unit, oscillating Unit 2: Milling unit top and bottom Unit 3: Profile grinding unit equipment: For edges R5

Condition: used, Year of construction: 2010, functionality: fully functional, Single-sided edge banding machine in full configuration, incl. a total of 3 interchangeable glue application units, 1 of which for PUR adhesive Material dimensions: Roll material: - Paper and plastic edges: 0.3 - 3.0 mm - Veneer edges: 0.5 - 3.0 mm - Strips: 3.0 - 8.0 mm Edge height min. 12 mm, max. 65 mm Machine’s equipment: Infeed guide rail, automatic adjustment via program Release agent application Joint trimming unit with 2 motors, each 4 kW Blow-off nozzle for removing loose particles Gluing unit with 1.8 L glue application, with QUICK-LOCK with single roll/strip magazine 1 main pressure roller and 3 follow-up pressure rollers Automatic pressure zone adjustment via program End trimming unit with 2 motors, 660 W, swiveling 0 to 8 degrees Corner rounding / copy milling unit with 2 motors, 180 W and 2 motors, 400 W Max. workpiece thickness 60 mm Max. feed speed 20 m/min Automatic adjustment via program Ncedpfx Adsybbayjwjl Profile scraping unit Glue joint scraping unit Cleaning agent application Buffing unit with 2 motors, 180 W Control system ICOS open TS, PC-based

Condition: used, machine/vehicle number: 005064, Position 1: Single Edgebanders BIESSE-STREAM B1 7.0 Position 2: Panel Return Systems BIESSE-STREAM B1 7.0 Ncjdoybaxbopfx Adwol

Condition: used, machine/vehicle number: 007176, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr Ncjdpfx Aoybaw Dedwsl

Condition: used, machine/vehicle number: 007575, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Maximum panel thickness: 60 mm Ncodpfjybawwex Adwjl Operating Units: 8 nr

Condition: used, machine/vehicle number: 005062, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 25 m/min Ncodpoybawdofx Adwsl Maximum panel thickness: 60 mm Operating Units: 8 nr

Condition: used, Year of construction: 2007, Used Automatic Edgebander for sale! Manufacturer: SCM Model: K1000 Year of manufacture: 2007 Status: dismantled and ready for transportation immediately! Location: Lithuania Equipment and technical specifications Edgeband thickness max 8 mm Panel thickness max 50 mm Thickness of coiled edgeband max 3 mm Workpiece length min 65 mm Feedrate max 18 m/min Nodsya Tv Repfx Adwscl

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 280 kg, type of input current: three-phase, compressed air connection: 6 bar, input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, pneumatic connection: 6 bar, pressure: 6 bar, operating pressure: 6 bar, We are offering this used BI-MATIC Prima Plus 7.3-r.a. Edge Bander Partnership Edition, year of manufacture 2021. Units/Assemblies: - Jointing cutter unit including AIGNER diamond jointing cutter heads, with DIA interchangeable knife system Konstantin and controlled edge air-blow nozzle located behind the second jointing cutter head. - End trimming saw unit with extraction device, including pneumatically swiveling saw blades, adjustable and programmable from the control panel. - Radius milling unit. - Corner rounding unit (copy milling unit) with insert shelf function and 2-position turret. The entire unit can be pneumatically engaged and disengaged. - Radius scraper unit, engageable and disengageable, including extraction device with chip collection box for scraper shavings. - Flat scraper unit with 4-way usable scraper blades. The entire unit can be engaged and disengaged. Removed glue residues are extracted. - Buffing unit with 2 diagonally arranged cloth buffing wheels. Equipment: - High-gloss package: Roller scanning for radius milling unit, radius scraper unit, and flat scraper unit - Large viewing, noise, and safety cabin for all units and the glue pot - Interior lighting - Operating panel with 12" touchscreen and intuitive user guidance - USB port for data backup and transfer - Network connection for online support - Controlled pneumatic cylinder for workpiece distance control - Teflon-coated glue pot with quick-change system and energy-saving mode in standby - Glue roller with feed screw for long and high workpieces (especially for PUR adhesive) - Pressure zone with motor-driven first pressure roller - Heavy-duty guillotine shears for 54 x 3 mm edges - Adjustable infeed guide via handwheel (jointing thickness adjustment) with digital display - Upper roller pressure beam with digital workpiece thickness display and handwheel adjustment - Pressure zone with digital display and handwheel adjustment - Manual 2-position turret for radius milling unit - Manual 2-position turret for corner rounding unit - Manual 2-position turret for radius scraper unit Technical data: Edge thickness: 0.4 - 3 mm Minimum panel width (without corner rounding unit): 80 mm Minimum panel width (with corner rounding unit): 130 mm Minimum panel length (without corner rounding unit): 100 mm Minimum panel length (with corner rounding unit): 300 mm Minimum panel thickness: 10 mm Maximum panel thickness: 50 mm Feed speed: 9 m/min Extraction port: 2 x 150 mm Njdpfx Adoya I Ubowjcl Connection: 9 kW - 400 V Compressed air: 6 bar Order no.: BIMA0650 If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), CATALOG NUMBER 7729 TECHNICAL DATA Equipment: - Tape holder - Glue tank (granulate) - Tape feeder - Guillotine – pre-cutting the edging - Pressure rollers 2 pcs - Min. width of processed components: 50mm - Thickness of processed components: 10-40mm - Min. internal radius: 50mm - Angled gluing with 1mm thick edging, 0-45° - Edge thickness: 0.3-3mm - Electric feed - Total power: 2kW Ncedpoya Hnaofx Adwol - Compressed air pressure: 6-7 bar - Dimensions (L/W/H): 1700x1300x1550mm - Weight: 310kg ADVANTAGES – Made in Poland – Unpainted – DTR technical documentation – Very good condition – used edge banding machine Net price: PLN 6500 Net price: EUR 1550 (exchange rate: 4.2 EUR) (Prices may vary depending on larger fluctuations)

Condition: used, Year of construction: 2015, height adjustment type: mechanical, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edgeband thickness: 0.4 - 3.0 mm - Workpiece thickness: 10 - 45 mm Ncedoya Ethjpfx Adwel - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units - Edgeband feeding from a reel via a feed plate - Edgeband feeding thickness from 0.4–3 mm, manual feeding of single strips - Guillotine shears for trimming edgeband from the reel up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing/fixing roller - Saw trimming unit, 9,000 rpm, 0.18 kW, HW saw blades Z= 16, Ø 80 mm - Multifunctional milling unit, 12,000 rpm, 0.22 kW, radius machining, straight milling, chamfering - Radius scraper unit, mechanically engaged, for R= 2 mm - Flat scraper unit, mechanically engaged Operation: - Control panel with LCD display and keyboard - Quick, tool-free unit adjustment system (Quick system) Feed: - Edged workpiece transport by chain with track - Feed speed: 8 m/min - Extendable support General data: - Extraction connection Ø 120 mm Overall dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm - Weight: 360 kg On customer request: - The machine is suitable for processing PVC and ABS edgebanding 0.5 - 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue tank - Pre-cut guillotine - Edgeband trimming with two saw units - Quick machine calibration system by placing a piece of edgeband in the dedicated clamp - The machine has been regularly serviced, lubricated, and cleaned, ensuring its excellent technical condition. - An ideal solution for demanding carpentry workshops and manufacturing plants.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, SCM edge banding machine, model K 201, CE mark, complete with control console, edge banding area for workpieces up to 3 mm material thickness and 45 mm material width, reinforced roller separation up to 3 mm, strip magazine, workpiece guidance via chain with roller top pressure, central adjustment of top pressure, frequency inverter, HF cross-cut saw unit, HF radius milling unit, motors with quick-change system, soundproof hood, digital glue temperature control, underfloor gluepot, glue application via roller dosing system, extendable roller rail, central extraction nozzle. Nedjyath Hjpfx Adwscl