Akces Group

Condition: excellent (used), Year of construction: 2015, operating hours: 54,244 h, machine/vehicle number: 231099, clamping force: 2,200 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, injection weight: 359 g, mold height (min.): 350 mm, ejector force: 70,000 N, ejector stroke: 200 mm, MACHINE WITH DOCUMENTED PURCHASE EVALUATION I offer a used Arburg Allrounder 570 S 2200-800, manufactured in 03/2015, with Multilift Select and protective enclosure. The redacted purchase evaluation documents the seller's information regarding technology, condition, maintenance, and equipment. TECHNICAL DATA Clamping force: 2,200 kN / 220 t Control system: Selogica Injection unit: 800 Screw: 50 mm Shot weight: 359 g PS according to seller's form Tie bar spacing: 570 x 570 mm Platen dimensions: 790 x 790 mm Minimum mold height: 350 mm Opening: 1,000 mm according to seller's form Ejection stroke / force: 200 mm / 70 kN Pump operating hours: 54,244 h Automatic operating hours: 48,230 h Operating hours according to control system photo dated 04.11.2026 Machine number: 231099 Total connection according to nameplate: 105 kW; 400 V, 3 ~, 50 Hz Bwsdpfx Age Ahzy Hoxew HANDLING AND EQUIPMENT Multilift Select transverse, 15 kg load capacity, No. 605572 X/Y/Z: 900/1,000/1,600 mm X-axis synchronized with ejector for precise part removal B- and C-axis pneumatic 4 x vacuum, 4 x gripper double-acting Customer-side inputs and outputs Protective enclosure 12 hot runner zones 2 core pulls, 2 blow functions Interfaces for temperature control unit and dryer Controlled pump, IE2 according to seller CONDITION AND AVAILABILITY Regularly maintained; last maintenance according to seller, internally in September 2026. No known defects or outstanding repairs are stated in the seller's form. The purchase evaluation is a documented seller's statement. Available according to the seller's form from the beginning of 2027. Price on request. I would be happy to discuss inspection, delivery, and payment terms with you personally.

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Bodpe Ahx Rkjfx Agxoww Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Bwsdpfxj Ahx Rgj Agxsw Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Bwsdpfxj Ahx A Io Agxow Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Hydraulic Oil Tank Capacity: 720 l Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Dimensions and weight Length: 6400 mm Bwedpfx Ao Ahxzfogxjw Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. Bodpfe Ahxyhox Agxsww The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: as good as new (ex-display), KraussMaffei KM 120-380 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 120-380 PX Year of Manufacture: 2023 Machine Type: Servo-electric injection molding machine with a servo-hydraulic system Clamping force: 1200 kN / 120 tons Screw diameter: 40 mm Control system: KraussMaffei MC6 Machine Description We offer a KraussMaffei KM 120-380 PX injection molding machine, manufactured in 2023, with a clamping force of 1200 kN (120 tons), equipped with a modern, 5-point, double-toggle clamping system with servo-electric drive. The machine features a servo-electric drive for injection and plasticizing, and a servo-hydraulic drive for the injection unit movement. It is equipped with an HPS-Mixing plasticizing unit with a 40 mm diameter screw, ensuring efficient plasticization and homogenization of the plastic. The KraussMaffei MC6 control system is based on an industrial computer with real-time Ethernet technology. TECHNICAL DATA Clamping Unit Clamping force: 1200 kN / 120 tons Mold opening force: 180 kN Clamping system: 5-point, double-toggle, 3-plate Clamping drive: servo-electric Mounting plate dimensions (H × V): 640 × 590 mm Column spacing (H × V): 470 × 420 mm Mold opening stroke: 400 mm Minimum mold height: 180 mm Maximum mold height: 550 mm Maximum distance between plates: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 22 / 10 kN Injection Unit Plasticizing system type: HPS-Mixing Screw diameter: 40 mm L/D ratio: 20.0 Maximum injection pressure: 1860 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 125 mm/s Volumetric injection rate: 157 cm³/s Screw speed: 334 rpm Plasticizing rate: 24.7 g/s Nozzle radius: 10 mm Bsdpfx Ags Ahxw Rjxoww Nozzle orifice diameter: 4 mm Injection and plasticizing drive: servo-electric Electrical and Hydraulic Equipment Control system: KraussMaffei MC6 Connected power: 13.8 kW Electrical protection: 63 A Installed heating power: 11.5 kW Number of adjustable heating zones in the cylinder: 5 Dry cycle time / stroke according to EUROMAP 6: 1.5 s / 329 mm Oil tank capacity: 120 l Machine Weight Net weight: 6900 kg / 6.9 t

Condition: used, Year of construction: 2004, operating hours: 94,000 h, clamping force: 150 kN, displacement volume: 124 cm³, injection pressure: 2,420 bar, overall weight: 7,900 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Bjds Ahrw Uspfx Agxsww terms of payment: 100% prior to delivery

Condition: excellent (used), Year of construction: 2010, operating hours: 49,000 h, functionality: fully functional, Technical specifications TM 180/750 with Wittmann robot Clamping unit Clamping force: 1800 kN Horizontal tie bar spacing: 520 mm Vertical tie bar spacing: 520 mm Tie bar diameter: 75 mm Minimum mold height: 225 – 550 mm Opening stroke: 480 mm Maximum mold thickness: 1030 mm Bedpfj Ahpvkex Agxeww Injection unit Screw diameter: 45 mm Specific injection pressure: 2116 bar Injection volume: 358 ccm Screw ratio L/D: 22 Screw stroke: 225 mm Nozzle stroke: 350 mm Number of control zones: 1+5 Wittmann robot W811-0245 Year of manufacture: 2010 X-axis: 550 mm Y-axis: 1200 mm Z-axis: 2000 mm

Condition: used, Year of construction: 2017, overall weight: 8,850 kg, Model 570 A 2000-400 Year of manufacture: 03/2017 Net weight according to the technical data sheet for the basic configuration: 8,850 kg with the following peripherals: - KUKA robot KR 16-2, year of manufacture 2017, with control panel - KUKA robot KR 10 R1100 sixx, year of manufacture 2017, with control panel - FARRAGTECH Card 40S compressed air granulator dryer - NZME temperature control unit station Bsdpfx Age Ahkh Aexsww - Conveyor belt - Machine stairs - Machine documentation as shown - Enclosure as shown, without any further accessories or items depicted in the background, not tested for function or completeness This ARBURG 570 A 2000-400 injection molding machine will be auctioned online in our industrial auction / machine auction "Aumovio Germany GmbH - Step 2 - Injection molding machines, temperature control units, storage racks and various". You can find this and many other items from the areas of temperature control units, operational equipment and storage technology on our platform.

Condition: excellent (used), Year of construction: 2021, operating hours: 9,000 h, clamping force: 1,000 kN, screw diameter: 30 mm, clearance between the columns: 470 mm, mold height (min.): 180 mm, ejector force: 32,000 N, ejector stroke: 150 mm, overall weight: 5,290 kg, input frequency: 50 Hz, input voltage: 400 V, ONLY APPROX. 9,000 OPERATING HOURS – FULLY ELECTRIC WITH ROBOT AND PERIPHERALS In very good condition according to the seller's assessment, and with only approx. 9,000 operating hours: this Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, impresses with its low operating hours. The extensive equipment, including an SDR-5S robot, two HB-Therm temperature controllers, and material handling equipment, makes this machine an attractive overall package. Bodpfxs Ahkfke Agxoww Fully electric Demag IntElect2 with robot and peripherals This used Sumitomo (SHI) Demag IntElect2 100/470-250, manufactured in 2021, combines 1,000 kN clamping force with an injection unit of size 250. The plasticizing unit is equipped with a highly wear-resistant, corrosion-resistant 30 mm screw with an L/D ratio of 20, as well as a bimetallic cylinder. Tooling space and process equipment The tie bar spacing is 470 x 470 mm; the mold height is specified as 180 to 550 mm. Two hydraulic and one pneumatic core pull circuits, integrated hot runner control for 16 zones, and an eight-fold cooling water flow controller are included in the equipment. activeProtect and the process data acquisition system PDE complement the process monitoring. Handling, temperature control, and material handling equipment The documented scope of supply includes the Sumitomo Demag SDR 5S H&P linear robot with a 3 kg payload, two HB-Therm Thermo-5 HB-160Z1 temperature controllers, two integrated conveyor belts, as well as an additional Z-conveyor and a sprue separator. Interfaces include EUROMAP 67, EUROMAP 77 / OPC UA, and EUROMAP 82.1 / OPC UA. Condition: very good, according to the seller's assessment. Operating hours: only approx. 9,000 h. Price and current availability are available upon request. I would be happy to assist you with the technical coordination of this used injection molding machine. TECHNICAL DATA Clamping force: 1,000 kN / 100 t Injection unit: 250 Screw diameter: 30 mm; L/D 20 Max. injection speed: 200 mm/s Tie bar spacing: 470 x 470 mm Mold height: 180–550 mm Ejector: 150 mm; 32 kN; 333 mm/s Mains voltage: 400 V / 50 Hz Machine weight according to nameplate: 5,290 kg DELIMITATION OF THE SCOPE OF SUPPLY The KOCH KKT 55 material drying system with the associated KOCH conveyor is not included in the quoted price of the Demag. The KOCH system can be purchased separately; price on request.

Condition: ready for operation (used), Year of construction: 2005, clamping force: 2,700 kN, Hydraulic injection moulding machine manufactured in 2005. This SANDRETTO 2480/270 features a clamping force of 270 T and includes a complete 16-cavity mold. The preform weights are 53 g or 66 g with a neck finish of 36/29. The machine is currently connected and operational, ensuring reliable performance. If you are looking to get high-quality PET preform production capabilities, consider the SANDRETTO 2480/270 machine we have for sale. Contact us for further details. • Condition: Currently connected and in operation; fully operational and running Additional equipment • Complete 16-cavity preform mold: Bsdpfe Ahhnnsx Agxjww • Neck finish: 36/29 • Preform weights: 53 g or 66 g • Piovan dryer • EISBAR mold temperature conditioner

Condition: used, Year of construction: 2014, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 144 cm³, injection pressure: 2,000 bar, injection weight: 132 g, mold height (min.): 250 mm, plate length: 570 mm, plate width: 570 mm, total length: 4,300 mm, total width: 1,700 mm, overall weight: 3,640 kg, Arburg 420C-1000-290 injection molding machine (261) with sorting flap Number: 261 Availability: in stock Year of production: 2014 Producer: Arburg Injection molding machine condition: used Screw diameter [mm]: 35 Injection weight [g]: 132 Injection pressure [bar]: 2000 Bwedpfx Ae Ahhfuogxow Closing force [kN]: 1000 Column spacing [mm]: 420 x 420 Plate size [mm]: 570×570 Min. mold height [mm]: 250 Control type: Selogica Tongue: English, German Installed power [kW]: 21.4 Working hours [h]: 59000(new pump 13000) Weight [kg]: 3640 Dimensions [mm]: 4300 x 1700 Feed hopper: NO Robot socket: Yes Core string: 1x Air valve: 1x Control of heating for molds: 3x

Condition: used, Year of construction: 2000, Plastic injection molding machine, Krauss Maffei, KM 300-1900 C2, dimensions: 6.21 x 2.04 x 2.38 m, weight: 12,500 kg, year of manufacture: 2000. Bwjdj Agtbwjpfx Agxsw

Condition: good (used), Year of construction: 2011, operating hours: 45,087 h, SUMITOMO shi-Demag Bwedpfj Agpc Rex Agxjw Systec 60/420-200 Clamping force 60 tons Year of manufacture 2011 Control system CDAIS Stroke 30 mm Displacement 106 cm³ Mold dimensions 420 x 420 Installation height 260 mm Operating hours 45,087

Condition: used, Year of construction: 1998, This Demag injection molding machine, type: ergotech pro 50-270, will be auctioned off online in our industrial auction / machinery auction focusing on warehouse clearance of industrial machines – injection molding machines, CNC machining centers, universal lathes, and more. Bjdo Agkd Espfx Agxeww You can find this and many other items on our platform.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Bwjdpfx Ae Afw Drjgxow Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: new, Year of construction: 2027, functionality: fully functional, machine/vehicle number: 61038305, clamping force: 9,000 kN, screw diameter: 55 mm, clearance between the columns: 1,440 mm, displacement volume: 570 cm³, injection pressure: 2,387 bar, injection weight: 519 g, opening stroke: 3,200 mm, drive type: Hydraulisch, clear span: 1,440 mm, tool weight: 20,00,000 g, Injection molding machines directly from the manufacturer! As a manufacturer, KraussMaffei offers you our inspected and versatile stock machines: The hydromechanical two-platen clamping unit of the GX machine sets new standards in terms of quality and productivity. With the sophisticated GuideX guide shoe, forces are ideally absorbed and the service life of the molds is increased. The innovative GearX locking system engages immediately and reliably. The high flexibility of the machine is particularly evident in the multi-component version. In this piggyback arrangement (Z-configuration), the system is extremely compact, and no special hall height is required, making this design particularly suitable for confined spaces. TECHNICAL DATA: Bsdps Afdlcsfx Agxsww KM 901 / 1400 / 750 GXZ G02 (Order 38618417) CONTROL  MC6 with 21.5" TFT color screen and multi-touch function CLAMPING UNIT  Clamping force kN 9000  Mold opening force, max kN 630  Daylight (h x v) mm 1440 x 1190  Platen size (h x v) mm 1950 x 1750  Minimum to maximum mold height mm 540 – 1540  Mold opening distance mm 2340  Maximum mold opening stroke mm 1800  Maximum mold weight kg 20000 INJECTION UNIT 1 - SP1400  Screw diameter / type mm 55 / Standard  Effective L/D ratio 21.8  Injection pressure bar 2387  Stroke volume cm³ 570  Shot weight at max. stroke for PS g 519  Injection speed mm/s 150  Injection flow rate cm³/s 356  Screw drive / speed 1/min 310  Plasticizing rate (standard screw)4) g/s 58.8  Nozzle mounting force kN 82 INJECTION UNIT 2 - SP750  Screw diameter / type mm 45 / Standard  Effective L/D ratio 22.4  Injection pressure bar 2336  Stroke volume cm³ 318  Shot weight at max. stroke for PS g 289  Injection speed mm/s 140  Injection flow rate cm³/s 223  Screw drive / speed 1/min 370  Plasticizing rate (standard screw)4) g/s 40.9  Nozzle mounting force kN 50 ELECTRICAL PARAMETERS   Power supply V / Hz 400 / 50 with neutral conductor ADDITIONAL EQUIPMENT  BluePower servopump drive  Integrated rotary table, movable platen, D 1830 mm  Euromap AW platen + AW positions ± (280.0) ± (0.280)  12x cooling water circuits ½” 85°C on the rotary table  10x cooling water circuits ¾” 85°C FWAP  Nozzle spacing SP1400 – SP750 300 mm  Wear-resistant plasticizing unit (ZE23.00)  Core pull, hydraulic 4+4  Air valves 2+2  Hydraulic cascade 8  Pneumatic cascade 26  Euromap interfaces E18, E67  Hot runner control zones 64 The machine is located at our plant in Parsdorf and will be available from week 09, 2025. Further optional equipment can be offered upon request. We look forward to receiving your inquiry.

Condition: excellent (used), Year of construction: 2001, 1,0 used injection molding machine with robot, safety fence, and conveyor belt. Manufacturer: DEMAG Type: ERGOTECH100/420-430System Year of manufacture: 2001 Clamping force: 100 tons Tie bar spacing: 420 x 420 mm Screw diameter: 35 mm Maximum injection volume: 168 cm³ Injection part weight: 150 g/shot Control system: NC4 Equipment: - Robot, Wittmann, Type: W711-0174, Year of manufacture: 2009 - Safety fence - Conveyor belt - 2 x core pull Bjdpfx Ags Afbx Texoww - Blow valve - Highly wear-resistant bimetallic screw - Dual-pump technology for parallel movements

Condition: excellent (used), Year of construction: 2003, 1,0 St. gebr. Spritzgießmaschine mit Roboter und Reinraumausstattung Hersteller: ENGEL Typ: VICTORY 80/25 TECH Baujahr: 2003 Bwsdpfx Ae Afbwpjgxjw Schließkraft: 25 Tonnen Holmabstand: HOLMLOS Schnecken DN: 18 mm Max. Hubvolumen: 20 ccm³ Spritzteilgewicht 18 g/PS Steuerung: CC200 Ausstattung: Roboter, Engel, Typ: ERC Reinraumkabine -1 x Kernzug -Ausblasventil

Condition: used, Year of construction: 2003, operating hours: 6,659 h, functionality: fully functional, KraussMaffei injection molding machine KM 300-1400 C2, manufactured in 2003, with extensive peripherals and material supply system. Manufacturer: KraussMaffei Machine type: KM 300-1400 C2 Designation on control panel: KM 300-1400 C2P International size designation: KM 1400 C2/300 Machine type: Injection molding machine Year of manufacture: 2003 Machine no.: 61004124 Machine weight: 14,370 kg Bwedpfxs Afaqbj Agxsw Operating hours according to display: 66,598:20 h Control system: KraussMaffei Material supply / dosing: Colortronic UB95 Temperature control / cooling unit: Frigel Microgel RCM80/6HP Year of manufacture Frigel: 2013 Voltage Frigel: 400 V Auxiliary voltage Frigel: 110 V Frequency Frigel: 50 Hz Maximum current Frigel: 17 A Refrigerant: R407C Refrigerant filling quantity: 2.4 kg Temperature range Frigel: -5 to +90 °C Weight Frigel: 200 kg Additional peripherals: Second Frigel Microgel unit, material conveying system, discharge conveyor belt and rotary table available Available from APRIL 2027

Condition: ready for operation (used), Year of construction: 2021, clamping force: 2,700 kN, overall weight: 10,700 kg, Vertical injection moulding machine manufactured in 2021. This Kloeckner Desma D 969.250 Z (S3) features a clamping force of 2700 kN and an injection volume of 500 cm³. The machine is equipped with a high-pressure injection unit and a touch-operated control system for process monitoring. If you are looking to get high-quality injection moulding capabilities, consider the Kloeckner Desma D 969.250 Z (S3) machine we have for sale. Contact us for further details. - Clamping Force: 2700 kN (300 US tons)- Injection Volume: 500 cm³- Injection Unit Type: B500HP (High Pressure)- Injection Pressure: 3500 bar- Nozzle Contact Force: 58 kN- Control System: 2030 TBM (Touch operation / process monitoring)- Operating System Status: Active 3,360 hours- Operating Hours (Hydraulic Motor): approx. 730 hours- Operating Hours (Hydraulic Pump - Clamping Force): 65 hours- Total Current: 138 A- Recommended Backup Fuse: 160 A- Supply Cable Cross-Section: 70 mm² Cu- Voltage: 3~400 V +N +PE- Frequency: 50 Hz- Max. Short-Circuit Current: 10 kA- Total Machine Weight: approx. 10.7 t (10,700 kg) (Clamping Unit + Hydraulic Unit: 9,700 kg; Injection Unit: 1,000 kg)- Footprint: 10 m²- Total Floor Load / Ceiling Load: 1,070 kg/m²- Foot Area / Floor Contact Area: 2,010 cm²- Specific Ceiling Load: 5.3 kg/cm²- Hydraulic Oil Tank Volume: 450/130 l- Temperature Control Medium Tank Volume: 2x7 l- Compressed Air Pressure: 6 bar- Compressed Air Flow: 0.5 m³/h- Cooling Water Flow: 1.6 m³/h- Cooling Water Inlet Temperature: max. 20 °C at 2.5 bar- Cooling Water Connection: 22-L- Pump Power / Rated Power: 22 kW (28.6 hp)- Pump Current Consumption: 32.0 A- Pump Pressure: 265 bar- Pump Flow Rate: 72/39 l/min- Maximum Mold Width: 560 mm- Maximum Mold Length: 780 mm- Platen / Stroke Dimensions: 600 mm stroke, platen distance 1480 mm, clamping stroke details 710 mm- Heating Plate Center Bore / Ring Size: Ø80 H9- Enclosure Type (UL): 1 Bedpe Ad Inljfx Agxsww

Condition: used, Year of construction: 2003, screw diameter: 80 mm, clearance between the columns: 8,00,710 mm, injection pressure: 1,855 bar, injection weight: 1,600 g, mold height (min.): 380 mm, ejector force: 90,000 N, ejector stroke: 230 mm, plate length: 1,200 mm, plate width: 1,100 mm, total length: 8,400 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 21,000 kg, Demag Ergotech 420/800-3300 system Year of manufacture: 2003 Control system: NC4 Injection unit 3300 - Screw diameter: 80 mm - Specific injection pressure: 1855 bar - Injection volume: 1779 cc - Injection shot weight: 1600 g - Cylinder heating band power: 31 kW - Screw L/D ratio: 20 Tool clamping unit 4200 - Clamping force: 420 t - Tool plate dimensions: 1200 x 1100 mm - Daylight between columns: 800 x 710 mm - Ejector force: 90 kN - Tool height: 380 mm - Opening stroke: 710 mm - Maximum distance between platens: 1530 mm Bwodpfx Ags Adpt Ajxew - Ejector stroke: 230 mm Electrical connection (fuse rating): 760 A Weight: 21000 kg Dimensions (m) length x width x height: 8.4 x 2.2 x 2.5 m

Condition: good (used), Year of construction: 2005, Demag Extra 130-430 Bsdpfx Age Acdnrjxeww Closing force: 130 tons Year of manufacture: 2005 Control system: CDAIS Die space: 47.5 x 47.5 Scrow: 40 mm Displacement: 231 cm3

Condition: used, A Demag all-electric injection molding machine with Wittmann 3-axis robot and safety enclosure is offered. Clamping force: 1500kN, locking force: 1650kN, max. mold opening stroke: 495mm, min./max. mold height: 275mm/585mm, max. distance between mold platens: 1080mm, mold platens X/Y: 770mm/770mm, clear distance between tie bars X/Y: 520mm/520mm, max. mold weight: 1700kg, max. mold weight on the movable mold platen: 1150kg, ejector stroke: 125mm, ejector force: 35kN, ejector retraction force: 35kN, screw diameter: 35mm, L/D ratio: 20, max. injection pressure: 2430bar, stroke volume: 166cm³, shot weight: 146g, max. metering stroke: 173mm, max. nozzle stroke: 400mm, nozzle immersion depth: 20mm, nozzle contact force: 30kN, installed barrel heating capacity: 9.4kW, material hopper capacity: 35l, control: CDIAS, operating hours: approx. 76000h, machine weight: approx. 7400kg. Including WITTMANN 3-axis robot, year of manufacture: 2006, travel X/Y/Z: 550mm/1200mm/2000mm, robot weight: approx. 240kg as well as safety enclosure and 1x core pull preparation AS. Documentation available. An on-site inspection is possible. Bwodpfx Agj Aa Alwexsw