ImmoBau Verwertungsgesellschaft mbH

Year of construction: 1976, condition: ready for operation (used), Grinding fineness range: 50µm-5mm, rotor diameter: 630mm, weight: approx. 1200kg. An on-site inspection is possible. Kjdoyarrkopfx Adwell

Condition: used, Used Alpine Model 630AFG stainless steel Aeroplex fluidized bed opposed jet milling system. Stainless steel classifier wheel belt driven by 15kw, 400/690volt, 2/50, 2940rpm motor. Unit includes (4) jet nozzles. Includes product feeding vessel approx 230 litre capacity with stainless steel screw feeder driven by 1.5kw, 400volt, 3/50, 1440rpm motor. Unit all mounted on common mild steel frame. Specifications: Motor Power: 20.1 hp Kodpfx Ajyanwvedwsll

Condition: used, Used JetPharma Model MC JetMill50 stainless steel mobile jet mill. Process gas maximum pressure 12 bar at 0 to 50 deg.c. Mounted on stainless stand. Specifications: Ksdpex Tibkefx Adwell Grinding Air Pressure: 174 PSI

Year of construction: 2007, condition: used, Manufacturer: Pallmann Model: PPSR 10-300 Year: 2007 Type: Contra Selector mill / Fine Impact mill Gentle grinding of dry or wet materials, soft to medium hard. High-throughput cold grinding with fine particle size distribution. Weight : 7000 kg Rotor drive speed: 1590 rpm (110 kW, 380 V, 1500 rpm) Sieve basket speed: 660 rpm (55 kW, 380 volts, 1500 rpm) Impact rotor diameter: Ø 100 cm Screen width: 30 cm Number of hammers: 60 Kjdpjx R D Iysfx Adwoll Pneumatic transfer pickup at machine exit Material : 316L stainless steel Technical documentation available

Condition: used, Manufacturer : Gericke Model : NBS 200/200 Ksdpjx R D Hpefx Adwoll Type : Nibbler Year: – Power motor : 1,1 kW / 1500 RPM Sieve : Ø 5mm Atex : Ex II d IIC T4 Machine size : 60 x 85 x 125 cm Weight : 55kg

Condition: ready for operation (used), A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China Kjdpfxjx R Dt Ao Adwell

Year of construction: 1999, condition: used, Document Description Mill for the size reduction and recycling of agglomerates, lumps and granules in mass. Manufacturer: Gericke Model: NBS 300/450 Year: 1999 Choice of granulometry: Grid or wire mesh Operating principle: Rotor with 4 blades. cutting effect on the product with the screen. Inlet section: 300 x 350 mm. Power: 3,7 KW Max capacity : 12.000 L/H (depending on product and output size). Kledjx R Apcjpfx Adwel Materials: stainless steel. Mounted on a mobile frame.

Condition: excellent (used), Bead Mill VMA Getzmann Dispermat SL50-C Power: 3 kW Speed range: 0-6000 rpm Milling chamber volume: 0.5 l Rod temperature sensor Kledpfx Adsx Rzxiewjl Very good condition, directly from production!!!

Condition: used, power: 160 kW (217.54 HP), GETECHA RS 8012 Granulator Accessories: with used control cabinet Ksdpfjx H Nvzex Adwsll Drive: 160.0 kW Rotor blades: 7x2 Stator blades: 4 Rotor diameter: 800 mm Rotor width: 1200 mm Feed opening: 1200 x 950 mm

Year of construction: 2015, condition: ready for operation (used), A laboratory ball mill Netzsch is available. Drive power: 1.5kW, speed: 4200rpm, ball diameter range: 0.05mm-2mm, total ball volume: 140ml, max. product volume batch/circulation: 140ml/500ml, max. product viscosity: 5000mPas. Machine dimensions X/Y/Z: approx. 850mm/600mm/700mm, weight: approx. 100kg. Documentation available. An on-site inspection is possible. Kodoxvrt Sspfx Adwsll

Condition: used, Hollow body granulator and secondary granulator for pre-shredded material. Klodpfx Asxgrx Nedwjl Rotor diameter 450 mm Rotor width 600 mm 3 rotor knives (diagonal cut), 2 stator knives Drive motor 22 kw

Condition: used, The Herbold PU 500 pulverizer is suitable for fine grinding of plastics and soft to medium-hard materials. Kjdjxgrqfjpfx Adwjll Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, Multiple knife mill / granulator with rotor with 16 knives 6 stator knives Klodpfxsxgrn Re Adwel Drive 90 kW With equipment

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Klsdpfxexgrnqe Adwjl Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Drive 37kw (ca be changed to max. 75 kw) Klsdsxgrgyspfx Adwol rotor diameter 500 mm rotor width 600 mm 5 knive scissor cut, housing hingeable, with 2 stator knives Opening inlet 500 x 600 mm

Condition: used, power: 160 kW (217.54 HP), Cutting mill TRIA 120-80 FN / Cutting mills New hydraulics, new knives, new bearings Drive: 160.0 kW Kodpfxexgrfvo Adwoll Rotor knives: 7x2 Stator knives: 2x2 Rotor diameter: 700 mm Rotor width: 1200 mm Inlet: 800 x 1200 mm

Condition: used, Condux Granulator type CS 300/600-4 WK Kedpexgrfijfx Adwsll Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Drive motor 37 kW (can be increased to 75 kW) Kedpfx Adoxgrd Eowell Rotor diameter: 500 mm Rotor width: 600 mm Inlet opening: 500 x 600 mm 5 knives, diagonal cut Hinged housing, with 2 stator knives.

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Kedpoxgrdfofx Adwsll Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Cutting mill / cutting mills Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Rotor 800 x 1600 mm wide Kledpfxsxgq Ucj Adwol Drive motor 250 kw

Condition: used, Granulator / Granulators Brand: HERBOLD Model: SMS 45/100-H5-3 Semi-open 5x2 knife rotor, 2 stator knife rows. Machine is equipped with replaceable third bed knife (deflector) to handle thick-walled materials. Infeed hopper for conveyor belt feeding. Rotor mounted outside the housing. Housing split in the middle, can be opened with a hand winch. Double inclined cut design: Rotor and stator knives are arranged opposite each other and cut like scissors. With base frame incl. vibration dampers. Klsdpfoxb Aggox Adwsl Machine data Rotor knives: 5 x 2 Stator knife rows: 2 Drive: 75 kW

Condition: used, Year of construction: 1976, functionality: unexamined, machine/vehicle number: TM5, input voltage: 380 V, Used Molteni Milano TM5 Multipurpose Mixer Klodpfjw H I Tlox Adwol Manufacturer: Molteni Milano Model: TM5 Voltage: 380 Volt Last inspection: June 2017 Year of manufacture: 1976

Condition: used, functionality: unexamined, machine/vehicle number: Pulverisette 05102, Used Fritsch Pulverisette ball mill with cabinet and accessories Manufacturer: Fritsch Model: Pulverisette 05102 Kledpfxew Hct He Adwsl Voltage: 220V Includes mobile cabinet with contents

Year of construction: 2006, condition: excellent (used), Used Tietjen GD12 ex Atex Hammer Mill Kjdew Dv Aiopfx Adwell Including 200kW 1500 rpm motor (other options possible upon request) Year of manufacture: 2006 Atex compliant Including DA576 feeder Magnetic separator and air gravity separator

Year of construction: 1999, condition: good (used), Wijnveen GHM 1250 Klodpfxow Dv Ace Adwsl Total width of grinding chamber: 1250 mm 150 kW motor with 1500 rpm (other motors available upon request) 1000 mm + 250 mm configuration for various screen perforations for coarse/fine grinding as desired. Including feeder with magnet Refurbished in 2014