Used Wire EDM machines with x-travel from 700mm for sale (10)

Condition: like new (used), Year: 2023 Machine travels: 800 x 450 x 640 x 360mm (X * Y * Z * W) Machine Dimension: 1910 x 1990 x 2240mm (2600mm Max) (W x D x H) Machine Weight: 1700Kg Max Weight for workpiece: 500Kg 2 Axis indexer with 3 jaw chuck Usable Electrode Diameter: ø 0.1 ~ ø 6.0mm Usable Electrode Length: 200 ~ 600mm, Drilling depth : 360mm Maximum Power: 3ø 415V 50㎐(Changeable) Max Allowable Current: 30A Rated Power Capacity: 5KVA Pneumatic Pressure Required: 5 bar Self-contained water system with filtration and deionisation system with sensor CNC programmable, from DXF or CNC auto hole patterns for PCD, Rows, Square, or GM code Dqq3Ev Auto routines for, set up, hole finding, simple programming

Condition: excellent (used), Year of construction: 2017, operating hours: 7,100 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, total height: 2,815 mm, total length: 3,100 mm, total width: 3,445 mm, workpiece height (max.): 505 mm, workpiece width (max.): 1,020 mm, workpiece length (max.): 1,250 mm, table width: 780 mm, overall weight: 5,900 kg, table length: 1,080 mm, Equipment: documentation/manual, For sale is a first-hand Mitsubishi MV4800 Advanced wire EDM machine, built in 2017. The machine has less than 7200 operating hours and is in excellent condition. It is currently still in operation. Dqozz2

Condition: good (used), Year of construction: 2003, Functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 770 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 400 mm, workpiece height (max.): 400 mm, workpiece width (max.): 1,100 mm, workpiece length (max.): 850 mm, net weight: 5,200 kg, Selling our Sodick AQ750L wire EDM machine Dqnmpr Machine is in good condition, being sold due to new purchase. YEAR OF MANUFACTURE 2003 Inspection under power possible, test cuts also possible. Accuracy of the machine is good. Due to the linear drives, the machine is very accurate even after years. The many ceramic parts also contribute to the accuracy in terms of thermal expansion. Travels U770mm V 520mm

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of construction 2013 Control unit HMI 1 Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Hu3U0Lk Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is currently still in use at the customer and will be cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Year of construction: 1998, Condition: good (used), Charmilles Technologies Robofil 510 EDM machine TECHNICAL DATA Control cabinet Generator type: Isopulse Max. Ambient temperature: 30°C Software storage time: 100 hours Maximum charging time: 60 hours Disk type: 3 ½ '' Number of storable programs: 112 Dimensions: 1800 x 650 x 1000 mm Cooling air: 800 m3/h at 30°C Cqz7Vlpvrz Maximum discharge current: 45 A Graphic color screen: 14 16-bit microprocessor: 3 Machine Machine bed: polymer concrete dimensions: 2100 x 2050 x 2230 mm Weight: 3800 kg Access door dimensions: 1220 mm Workpiece Maximum dimension, workpiece: 1200 x 700 mm Maximum height of the workpiece: 400 mm Maximum load: 1000 kg Travels X-axis: 700 mm Y-axis: 400 mm Z-axis: 400 mm U-axis: 700 mm V-axis: 400 mm Measuring resolution: 0.5 μm Maximum manual speed: 15 mm/s Wire Wire diameter: 0.1 to 0.3 mm Speed: adjustable from 0 to 15 m/min Mechanical tension: adjustable from 0 to 30 N Clearance angle: adjustable from 0° to 30 Maximum height for threading: 300 mm Automatic threading (2 mm): Yes Automatic rethreading: Yes Bobbins: K125 (4 kg) / K160 (8 kg) / K200 (16 kg) Dielectric Deionization: Resin mixture, 20 l Tank type: waterproof steel sheet, welded dimensions: 2030 x 1420 mm Capacity: 450 l Filter system: 10 Flushing, pressure: 0 to 11,5 bar External connections Power Mains frequency: 50 Hz Cos. PHI: 0.8 Three-phase input voltage: 380 V / 400 V Permissible fluctuations: +10% to -15 Allowable micro-interruptions: 4 ms Connected load: 10 KVA Inrush current: 10 KVA Cooling Minimum pressure difference between inlet and outlet of the cooling source: 2 bars Maximum pressure at inlet: 5 bars Maximum flow rate: 25 l/min Air Pressure range: From 6 to 7 bars Capacity: 1 l/min General data Permissible ambient temperature: 20°C +- 1° C Permissible air humidity: 40 to 80 Noise level: 72 dB We do not assume any liability for the correctness, completeness and topicality of the information.

Condition: excellent (used), Year of construction: 2020, operating hours: 3,339 h, Functionality: fully functional, workpiece weight (max.): 3,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 510 mm, total height: 2,645 mm, total length: 2,870 mm, total width: 2,670 mm, workpiece height (max.): 510 mm, workpiece width (max.): 1,450 mm, workpiece length (max.): 950 mm, overall weight: 6,300 kg, For sale is a CUT P 800 wire erosion machine incl. options: Wire guides 0.25 mm AC-Setup 3D Taper-Expert © 0.25 mm Jtpveth Horizontal manual annealing Additional M-functions Signal light - operating status display Automatic central lubrication

Condition: ready for operation (used), Year of construction: 2006, General Data Measurements width 2580 Measurements depth 2870 Measurements height 2150 Machine weight 4220 Control Unit Brand MITSUBISHI Model 64-BIT-CNC Main Drive Wire diameter 0.1-0.36 mm Wire feed 1300 mm/min Max taper angle 15° (FOR 260 MM THICK WORKPIECE) Movement X-Axis Movement 1050 Y-Axis Movement 800 Z-Axis Movement 295 Workpiece Workpiece weight 1500 kg Table Bkj7G2Btba8 Outer length 780 mm Outer width 630 mm Media Power consumption 15 kW This Mitsubishi Electric FA20-VS Erosion Machine from 2006 is a compact machine, operated through a Mitsubishi 64-BIT-CNC Control unit. Aside from its solid condition, the equipment stands out for its 1500-kilogram workpiece weight capacity. Application Types EDM

Year of construction: 2006, Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS Integrated C-axis: 0 - 40 rpm Distance table to quill: 215 - 615 mm X-axis: 700 mm Y-axis: 500 mm Z-axis: 400 mm 29R0Sfm table dimension: 870 x 550 mm table load: 2000 kg electrode weight: 50 kg feed rate: 1500 mm/min resolution: 0,001 mm C-axis resolution: 0.001 Filling volume dielectric: 840 l / 698 kg MACHINE DETAILS working current: 72 A supply voltage: 400 V / 3 phases / 50 Hz Connected load: 12 kVA rated current: 15 A dimensions: approx. 3 x 3 x 2,93 m Weight: 5090 kg incl. separate coolant tank

Condition: refurbished (used), Year of construction: 2011, Functionality: fully functional, GF AgieCharmilles CUT 400 Year of construction 2011 Control Charmilles Millenium Travels (X / Y / Z): 800 x 550 x 510 mm Travel (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm U0Dgnoupsh Total weight of the system: 6300 kg The machine is cleaned, overhauled and tested for all functions by us after receipt of order. Optional: - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set

Condition: refurbished (used), Year of construction: 2015, Functionality: fully functional, GF AgieCharmilles CUT 400 Sp Year of construction 2015 Control unit HMI 1 Travels (X / Y / Z): 800 x 550 x 510 mm Travels (U / V): 800 x 550 mm Max. Taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3000 kg Cutting speed of 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire reel with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total weight of the system: 6300 kg The machine is currently still in use at the customer and will be cleaned, overhauled and tested for all functions by us after receipt of order. Optional: D7Aqlqral - Commissioning of the machine on your premises - Training on site - Cooling unit - Transportation - Clamping bar set