GLM Service und Vertrieb GmbH & Co. KG

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 210 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 800 mm, number of axes: 6, This 6-axis DMG Mori Seiki NZ2000T3Y2 was manufactured in 2008. It features a maximum machining diameter of 200 mm and a maximum machining length of 260 mm. The bar machining capacity is 65 mm, with an X-axis travel of 210 mm, Z-axis travel of 300 mm, and Y-axis travel of 110 mm. If you are looking to get high-quality turning capabilities, consider the DMG Mori Seiki NZ2000T3Y2 machine we have for sale. Contact us for further details. Kedpfx Ajy Tvdfeccedl • Max. machining diameter: φ200 mm • Max. machining length: 260 mm • Bar machining capacity: φ65 mm • X-axis travel: 210 mm • Z-axis travel: 300 / 810 mm • Y-axis travel: 110 mm • Phase: 3 • Frequency: 50 Hz • Voltage: AC 200 V • Full load current: 283 A • Spindle motor current rating: 105 A • Short circuit current: 1 kA • Maximum voltage: 220 V • Rated power: 98 kVA • Machine weight: 9500 kg Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Weiler Praktikant VCD Precision Lathe Manufacturer: Weiler Kdedey Ti Siepfx Accjl Model: Praktikant VCD Precision Lathe Year of manufacture: 2013 Condition: used, very good, as-new condition, no signs of wear, incl. new servicing and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed slide guide length: 350 mm Bed width: 205 mm Turning tool cross-section (height x width): 20 x 20 mm Height from top slide to centre: 30 mm Spindle nose according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4000 rpm Number of gear stages: 1 Number of speed ranges: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill travel: 85 mm Quill taper: 3 Morse taper Weight, without packing and accessories, approx. 1150 kg Length / Width / Height, net: 1720 x 890 x 1700 mm Headstock / rear wall / sliding safety cover: Light grey RAL 7035 Machine base / machine bed: Basalt grey RAL 7012 Screen display housing: Blue NCSS 4550-R80B

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Ksdpfx Acjy Ti Nuscjdl Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: good (used), 1999 MURATEC MT12 CNC lathe. Kdsdpfx Acsy Ta Stjcel

Condition: good (used), Year of construction: 1999, 1 CNC lathe, MT12 model, manufactured by MURATEC in 1999, including: Ksdpfjy Ta Sgex Accjdl 1 STAUBLI RX90 robot.

Condition: excellent (used), Year of construction: 2007, 1. Turning center with dual spindle and dual turret, TW20 NAKAMURA model, manufactured in 2007, including: 1. STAUBLI robot Kjdjy Ta Saepfx Accjdl 2. Control center

Condition: excellent (used), Year of construction: 2007, 1. TW20 NAKAMURA turning center with dual spindle and dual turret, manufactured in 2007, including: 1. STAUBLI RX130 robot Ksdpfxey Ta R Ae Accedl 2. Control center

Condition: good (used), Year of construction: 2005, 1 MW 200 MURATEC twin-spindle CNC lathe from 2005, including: 1 Conveyor 1 Integrated air conditioning system 1 Fume extractor Kdedpfx Acey Ta Rpecsl

Condition: excellent (used), Year of construction: 2000, 1 CNC turning center with twin spindle and twin turret, MT12 MURATEC, manufactured in 2000, including: 4 axes 1 parts unloader Ksdpfey Ta Nfex Accedl

Condition: good (used), Year of construction: 2008, 1. 2008 MW120 MURATEC CNC twin-spindle, twin-turret lathe, including: Kedpfx Acsy Ta Eyjcodl 2. Integrated manipulators

Condition: good (used), Year of construction: 2005, 1. CNC twin-spindle, twin-turret MW120 MURATEC turning center from 2005, including: 2. Integrated manipulators 3. One manipulator from 2005. Kdodpfx Acoy Ta Egecsl

Condition: good (used), Year of construction: 2005, 1. 2005 MW120 MURATEC twin-spindle, twin-turret CNC turning center, including: Ksdpfxey Ta Dve Accodl 1 integrated manipulator

Condition: used, Year of construction: 2011, For sale: a Dugard 42 TT-60 lathe with a feed mechanism. Kjdpjy S Ttnefx Accjdl

Condition: ready for operation (used), Year of construction: 2015, operating hours: 2,322 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 235 mm, travel distance Z-axis: 1,144 mm, overall weight: 6,300 kg, controller manufacturer: OKUMA, controller model: OSP-P300L, number of axes: 3, This 3-axis Okuma Genos L300E-M was manufactured in 2015. It features a maximum turning diameter of approximately 300 mm and a distance between centers of 1060 mm. The machine is equipped with live tooling and C-axis capabilities, enhancing its versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the Okuma Genos L300E-M machine we have for sale. Contact us for further details. • Control: OSP-P300L • Main Spindle: Yes • Live Tooling: Yes • C-Axis: Yes • Y-Axis: No • Maximum Turning Diameter: approx. 300 mm • Distance Between Centers: 1060 mm • Coolant Through Live Tools • Supply Voltage: 400 V • Phase: 3 Phase • Frequency: 50/60 Hz • Rated Capacity: 22.4 kVA • Full Load Current: 33.5 A • Largest Motor Rating: 89 A • Short Circuit Rating: 2.5 kA • Chip Conveyor: Yes • Oil Mist Extractor: Yes • Optional: possible accessories, including driven tools (5 pcs.), all jaws, holders • Spindle Runtime: 2322 h Kdodpfx Acey S Sh Rscel Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, 2-axis CNC lathe, manufactured in 1995, complying with CE standards FANUC 0-T CNC control Flat guides ASA 6" Bar capacity: 62mm Maximum turning diameter over bed: 600mm Maximum turning diameter: 250mm Maximum turning length: 630mm Maximum spindle power: 15Kw Weight: approximately 5,000 Kg. Complete with: Hydraulic chuck Kdedpfxsy S R Ayo Accjl Tailstock 12-position automatic tool turret Chip conveyor

Condition: good (used), Year of construction: 1994, functionality: fully functional, Control system for Traub TX8F, Turret, Tailstock, Chuck jaws, Chip conveyor, Manuals. No guarantee regarding the accessories shown in the photograph. Kdjdey S Rrnspfx Accel

Condition: excellent (used), INDEX ABC 65 is an INDEX CNC Turning‑Milling‑Drilling Center designed for high precision, accuracy and reliability. Capacity: 2 turning spindles, 2 turrets; spindle bore 65 mm; spindle diameters 140/110 mm; travels Z300 X140 Y100 mm; turret positions 10/9 (back 8). Specs: main spindle stepless 0–6000 rpm, 25/35 kW, torque 80/120 Nm; back spindle 6000 rpm, 5/9 kW; driven tools 7.5/9 kW; tool shank 45 mm; indexing 0.4 s; rapids X30/Z50 m/min; power supply 3x400 V 50 Hz; installed power 41 kW; weight ~6500 kg; dims 3600×1280×1950 mm. Accessories: 300 l coolant, 80 bar high‑pressure, paper filter, lamp, collet device, USB, parts conveyor, chip conveyor, toolholder set. Achieves tight tolerances; ideal for automotive, watchmaking, aerospace, medical and toolmaking. Kjdpfx Aoy S Dfujccodl

Condition: reconditioned (used), Year of construction: 2009, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: - CNC control: Mazatrol Matrix - SMW collet chuck 173E for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - C-axis counter-spindle, input accuracy 0.0001 - Y-axis Kedpfx Ajy S A Risccedl - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 pcs. fixed tool holders - 2 pcs. driven tool holders

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 150 mm, travel distance Z-axis: 240 mm, number of axes: 2, Horizontal turning machine manufactured in 2019. This SCHAUBLIN 102Mi W25 features a W25 spindle nose and an integrated motor headstock. It includes a pneumatic clamping device and a Tripan-111S quick-change tool holder system. The machine is equipped with a 3-jaw chuck and a tailstock with a rotating center. If you are looking to get high-quality turning capabilities, consider the SCHAUBLIN 102Mi W25 machine we have for sale. Contact us for further details. Kdsdpsy Snmvjfx Accjl • Spindle nose: W25 • Headstock: Integrated motor • Mounting: Mounted on workbench (Version CE) • Cross-slide: Crank cross-slide with digital measurement device • Tailstock: Morse Taper 2 • Color: RAL7015 / RAL9010 Additional equipment • Workbench: 2000 x 800 x 900 mm • Lista drawer cabinet: 564 x 725 x 850 mm • Pneumatic clamping device W25 with graphite distributor • Tripan-111S quick-change tool holder system • Boring bar holder, 30° angled, max Ø12 mm • 3-jaw chuck W25/Ø100 (cast iron, manual) • Tailstock accessory: Rotating center 60°, Ø18 mm (Gepy) • Collet set W25 (0.5–25 mm, 50 pieces) • Mebiflex 70 lamp Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2009, spindle speed (max.): 4,500 rpm, travel distance X-axis: 250 mm, travel distance Z-axis: 600 mm, controller manufacturer: TRAUB, controller model: TX8i, number of axes: 7, This 7-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC • TX8i control with 64-bit technology including TFT color flat screen and electronic handwheel • Electrical system according to VDE/EN 60204 • Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz • Operating voltage machine 400V 50 Hz • Operating voltage accessories 230V 50 Hz • Control voltage 24V DC • Machine equipped with interference suppression set for industrial networks (EMC compliant) • CE conformity declaration and CE marking • Designed for machining metals and plastics with defined cutting edge • Main spindle C-axis (numerically controlled turning and positioning device) • Counter spindle C-axis with speed-synchronous control • Tool drive turret 1: power 3.1 kW, speed 4000 rpm • Tool drive turret 2: power 3.1 kW, speed 4000 rpm • Tool monitoring TX8i with wear and breakage control via axis motor monitoring • Thread cutting without compensating chuck • Software TRAUB Polyform for milling programming with C-axis (front, longitudinal, cylindrical surface) • Network connection preparation with Ethernet interface and RJ45 socket • Z/V axis counter spindle software with defined end position (plan surface transfer) • 65 mm spindle bore / 60 mm max clamping diameter depending on collet system Additional equipment • Workpiece unloading device with gripper in turret 2 (automation) • Chip conveyor (hinged belt), discharge height 1200 mm • High-pressure coolant system with programmable pressure stages 20 / 5 bar • Preparation for extraction and filter system, connection Ø200 mm, 400V socket • Bar feeder interface preparation DNH 61 Technical Specification Counter Spindle Yes Driven Tools Yes Kdodpfx Acoy Sg Niscsl

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 210 mm, travel distance Z-axis: 450 mm, controller manufacturer: TRAUB, controller model: TX8H, number of axes: 3, This 3-axis TRAUB TNA 300 horizontal turning machine was manufactured in 2000. It features a spindle diameter of 65 mm and includes a high-pressure coolant system, driven tools with 4 kW power, and an automatic bar change system. The machine is equipped with a chip conveyor and tool monitoring systems for enhanced efficiency. If you are looking to get high-quality turning capabilities, consider the TRAUB TNA 300 machine we have for sale. Contact us for further details. • Spindle bore / machine capacity: 65 mm • Installed 185E collet system capacity: max. 60 mm clamping diameter • Machine version: without tailstock • Basic configuration: included • Hydraulic hollow clamping cylinder: included • High-pressure coolant system: 12 bar / 3 bar • Control system: TX8H, 32-bit technology; processor latest generation (at time of build); parameter data on diskette • Axes/functions: • C-axis: included (numerically controlled spindle positioning and turning axis) • Y-axis: not included • Driven tools: included; power 4 kW • Monitoring and safety: • Tool breakage monitoring: included • Tool wear monitoring: included • Automatic drive shutdown after material end: selectable via parameter • Error message via parameter: selectable • Guideway cover: included • Workholding: • Collet clamping system: ROHM • Collet system compatibility: • DIN 6343 size 48, max diameter 42 mm • Rubberflex series 52 compatible • Rubberflex series 36 compatible • Fahrion collet FM 1149 MB compatible • Fahrion collet FM 1148 MB compatible Kjdpfx Asy Sg Dgoccodl • Electrical: • Electrical system according to: VDE / EN 60204 • Operating voltage: 400 V / 50 Hz • Accessory voltage: 230 V / 50 Hz • Control voltage: 24 V DC • Multi-voltage transformer: 460 / 400 / 380 / 220 / 200 V • EMC: • Compliance: industrial class A • Standards: EN 50081 / EN 50082 / EN 55011 / EN 55022 • Machine standards: DIN EN 292; DIN EN 294; DIN EN 418; DIN EN 60204-1 • Pneumatic system: Mannesmann Rexroth ISO Additional equipment • Chip conveyor: included • Workpiece removal device: included; via conveyor, left side discharge • Bar feeder preparation: included • Bar feeder: TRAUB DNH 61-3000 (automatic) • Feeding: telescopic pusher system • Bar shapes: round / hexagonal / square • Maximum bar length: 3200 mm • Maximum bar diameter (long bars): 63 mm • Maximum bar diameter (short pieces): 65 mm • Automatic bar change: included • Residual piece removal: forward • Central adjustment of bar diameter: included • Stepless feed force adjustment: included • Central magazine adjustment: included • No guide channel change required • No clamping sleeve change required • Short remnant pieces possible • Transverse loading system • Transport weight: approx. 2100 kg Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2012, spindle speed (max.): 6,000 rpm, travel distance X-axis: 81 mm, travel distance Z-axis: 80 mm, spindle motor power: 20,000 W, number of axes: 5, This 5-axis Index ABC horizontal turning machine was manufactured in 2012. It features a main spindle with a maximum speed of 6000 rpm and a sub spindle with a speed of 4500 rpm. The machine includes two turrets, each equipped with X and Z axes, and a powerful tool drive. If you are looking to get high-quality turning capabilities, consider the Index ABC machine we have for sale. Contact us for further details. • Main spindle: D65, spindle interface AD140, ID83, max speed 6000 rpm; max power 20 kW at 100% duty cycle; C-axis; electronic synchronization between spindles • Sub spindle: 7.5" chuck interface, max speed 4500 rpm • Chuck: 3-jaw KFN95/3, clamping force 480 daN, max 4000 rpm • Turrets: two turrets each with X and Z axis; tool drive on turret 6000 rpm, 3.3 kW • Rear working attachment: without quill, 5 quill positions • Coolant: 80 l/min at 8 bar and 20 l/min at 18 bar; system prepared for emulsion; coolant return at spindle end D60 (without bar feed) • Control: INDEX C200-4D based on Siemens 840D; color display 26 cm; thread cutting without compensating chuck; motor-current-based tool monitoring; internal tool management and setup dialog; extended machining cycles; parts counter and production monitoring • Power/connection data: 400 V, 50 Hz TN network; total connected load 45 kVA; rated power 38 kW; rated current 65 A; max fuse protection 100 A • Hydraulic hollow clamping cylinder D65 Additional equipment • Chip conveyor: hinged belt, discharge height 1250 mm • Bar feeder: MBL 65/3700 for spindle height 1010 mm; bar diameters up to 65 mm; bar feeder length 3700 mm; guide channel system with rolling bearings; loading rods (Ø12 mm and Ø20 mm, length 1400 mm); guide sets for 14–18 mm, 18–22 mm, 22–65 mm • Workpiece unloading device for main and sub spindle with part catcher • Teleservice preparation (ISDN) with software • Machine prepared for extraction system 230 V • Working area light • Two electrical cabinet cooling units • Transformer 3 kVA Technical Specification Counter Spindle Yes Driven Tools Yes Kdedpfxoy Sg Das Accel

Condition: ready for operation (used), Year of construction: 2020, spindle speed (max.): 1,800 rpm, travel distance X-axis: 203 mm, travel distance Z-axis: 1,219 mm, number of axes: 3, This 3-axis HAAS TL-2 was manufactured in 2020. It features a maximum cutting length of 1,218 mm and a maximum cutting diameter of 203 mm. The machine is equipped with an 8" manual 3 jaw chuck and a 4-station tool turret, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the HAAS TL-2 horizontal turning machine we have for sale. Contact us for further details. Kdedpsy Sgvcofx Accel • Max cutting diameter: 203 mm • Max cutting length: 1,218 mm • Spindle: A2-5 nose • Tool turret: 4-station • Functionality: Rigid tapping • Condition: Very good; very low running hours; can be checked under power Additional equipment • 8" manual 3-jaw chuck (A2-5) • Tailstock • Manual steadyrest Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2013, spindle speed (max.): 6,000 rpm, travel distance X-axis: 260 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 350 mm, spindle motor power: 11,000 W, total height: 2,250 mm, total width: 1,985 mm, overall weight: 4,050 kg, controller manufacturer: OKUMA, controller model: OSP P300L, product length (max.): 1,734 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis Okuma LB2000EXII MC was manufactured in 2013. It features a maximum swing diameter of 580 mm and a maximum machining diameter of 360 mm. The machine includes a turret head with 12 tool positions and a rapid traverse speed of 25 m/min on the X-axis. If you are looking to get high-quality turning capabilities, consider the Okuma LB2000EXII MC horizontal turning machine we have for sale. Contact us for further details. • Chuck size: 6" Ksdpoy Sgr Rsfx Accsdl • Max. swing diameter: 580 mm • Max. machining diameter: 360 mm • Max. machining length: 150 mm • Spindle power: 11.0/7.5; (15/11; 22/15) kW • Turret: • Tool positions: 12 • External tooling: 20 x 20 mm • Internal tooling: Ø 32 mm • Driven tool speed: 45–6000 rpm • Driven tool power: 5.5/3.7 (7.1/4.1) kW • Rapid traverse: • X-axis: 25 m/min • Y-axis: 12.5 m/min • Z-axis: 30 m/min • W-axis: — • C-axis: 200 rpm • Hours: • Total: 43,157 • Cutting: 18,671 Additional equipment • Bar feeder: IRCO MUK-7012 (bar Ø 6–70 mm, length 1250 mm) • Tool holders (including driven tool holders) • Collet chuck: Hainbuch SPANNTOP Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 1999, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. Kjdpoy R Uvusfx Accodl • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes