Used Tenoning machines for sale (40)

Condition: used, cut-off saw 1,85 KW Spindle diameter 40 mm Spindle length 130 mm power main drive with 4,4 kW Festo slotting machine ZA ----- with crosscut saw Gedpfxjxmk D Ds Aabjuh 1 slotted spindle ZA length stop For sale on behalf of the customer in the IS condition!

Condition: used, Year of construction: 1993, Used machine Year of manufacture: 1993 Equipment and technical specifications: Circular saw power: 2.6 kW Circular saw speed: 3,000 rpm Maximum saw blade diameter: 400 mm Cutting height: 160 mm Lateral adjustment: 120 mm Guodpfx Aasxizt Isbeh Milling motor power: 7.5 kW Milling spindle speed: 4,000 rpm Milling arbor/tool holder: Ø 40 mm Maximum tool diameter: 400 mm Maximum tenon length: 170 mm Rolling table height adjustment: 80 mm Stroke spindle with pneumatic single stroke (2 tool positions, adjustable end stops), adjustable saw unit via handwheel for different tenon lengths, automatic workpiece clamping, lateral adjustment of rolling table, rolling table fence for mitre cuts up to 45°. Includes Festo-LAS length stop Dimensions: to follow Weight: approx. 580 kg All data provided subject to change until the machine arrives at our warehouse. Availability: approx. end of October 2025 Location: Brandenburg

Condition: used, Year of construction: 1996, Shaft diameter: 30 mm Cutting height: 125 mm Horizontal stroke: 145 mm Engine: 2.2 kW (3 hp) Upper unwinder: Godoxg I Ugspfx Aabouh Tool holder length: 150 mm Tool holder diameter: 150 mm Lateral travel: +/- 30 mm Vertical stroke: 0-160 mm Engine power: 2.2 kW Lower unwinder: Tool holder length: 150 mm Tool holder diameter: 150 mm Lateral travel: +/- 30 mm Vertical stroke: 0-160 mm Engine power: 2.2 kW Independent or simultaneous vertical adjustment of the unwinders Cast iron mobile trolley Manual presser Ruler with stop Suction nozzle 3 x 150 mm + 1 x 80 mm (saw)

Condition: excellent (used), Catalog number 7382 Guodpfxjtx T Dxo Aaboh TECHNICAL DATA tenting trolley: - electric trolley feed with smooth speed regulation - trolley adjustable at an angle - feed motor 0.46kW - table size L/W 700x450mm with extension up to 1150mm - transverse gear on the trolley - cutting length on the extendable telescope 1860mm - rotating block in the gear - 2 pneumatic clamps saw for cutting to length: - max. blade diameter 380mm - max. cutting height 110mm - blade adjustable up/down, front/back and at an angle - blade guard - saw motor 2.2kW tenting mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 320mm - spindle diameter 40mm - spindle working height 220mm - spindle lock - 7.5kW motor profiling mandrel: - pneumatic mandrel stroke - mandrel adjustment up/down and stroke using knobs - max tool diameter 200mm - spindle working height 220mm - spindle diameter 54mm - spindle lock - steady rest extendable from the table - 7.5kW motor saw for cutting out glazing bead: - max disc diameter 200mm - disc hole diameter 30mm - adjustable disc front/back, top/bottom - disc cover - 2.2kW motor feed: - number of rollers 8pcs - motor approx. 0.55kW - roll size 110x50mm - 8 types of feed speed 4,6,8,10,12,15,20,30m/min - diameter of the exhaust port 60mm, 2x130mm, 110mm, 100mm - working pressure 6-8 bar - dimensions length/width/height 3600x2100x1600mm, weight about 2500kg ADVANTAGES - for window production - pneumatic mandrel stroke - trolley with electric feed - saw for cutting to length - tenoning mandrel - unpainted, used machine, very good condition Net price: PLN 27,900 Net price: EUR 6,570 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Pen machine - saw group * saw diameter 500 mm * max. cutting width 200 mm * 2.2 kW motor - horizontal milling head above * tool diameter 200 mm * max pin length 150 mm * motor 2.2 kW - horizontal milling head bottom * diameter of the tool 200 mm * max. tenon length 150 mm * 2.2 kW motor - milling spindle * diameter of spindle 50 mm * max tool diameter 350 mm * length of spindle 180 mm * 5.5 kW motor - swiveling table +/- 60° - pneumatic pusher Gsdpfx Aajxd A E Usbsuh - stop bar max. 3000 mm - counter profile rotatable - Swinging of the stop bar +/- 45°

Condition: used, WEINIG UNITEC 10 automatic tapping and slotting machine as a spare part carrier from a UC-Matic window system. * Year of manufacture: 1997 * Sütron BT20 control system * Machine incomplete * Details upon request. Guodpow I Db Hofx Aaboh

Condition: used, cut-off saw 3 KW Spindle diameter 50 mm Spindle length 300 mm Number of tools variabel St. Control CNC Dimensions (L/W/H) 2500x1700x2100 mm weight 1700 kg HABERKORN - FZS-2 Electronic Slotting Machine with Stepless Slotting Spindles and Automatic Roller Table ----- Crosscut Saw ----- Spindle Positioned at the Top Three-Phase Motor 3 KW Spindle Diameter 30 mm Speed ??2800 rpm Saw Blade Diameter 400 mm * Automatic Brake with Speed ??Monitoring * Stepless Saw Positioning with Siko Display Gjdpfx Aowgwlkoabeuh * Guard and Extractor Hood with 100 mm Diameter Extractor Nozzle 2 Slotting Spindles 50 mm Diameter ----- Power 2 x 7.5 KW Speed ??4200 rpm Spindle Diameter 50 mm Max. Tool Diameter Approx. 360 mm Usable Length 300 mm * Both slotting spindles can be positioned via ball screw * Freely programmable 19 programs, display with function keys * Protective and extraction hood with 180 mm diameter extraction nozzle * Automatic brake with speed monitoring Studio table ----- * Swivel range +/- 65° * Automatically changing counter wood (programmable) * Pneumatic clamp * High-precision electrical degree indicator * Automatic length compensation * Counter wood at any angle setting in the cutting plane Special features ----- Continuously adjustable roller table feed Laser for workpiece positioning Manual length stop LA 2000 Length 2500 mm Extraction nozzle diameter: 2 x 180 mm for slotting spindles 1 x 100 mm for crosscut saw ----- Price of the above-mentioned machine upon request! ----- Images show the same model. Original images not yet available. (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus statutory VAT.

Condition: used, Year of construction: 1991, Used machine Year of manufacture: 1991 Designed for all window tool systems up to 400 mm tool diameter Thanks to the standard braking systems (foot brake for the slot spindle, automatic electronic safety brake for the saw), the machine can be braked to a stop in just a few seconds. The protective covers for the slot spindle and cross-cut saw are designed to allow easy and convenient tool changes without the need to remove the covers themselves. The cross-cut saw can be conveniently adjusted from the operator’s position via a quick-adjust mechanism. A six-position turret head allows quick adjustment to various dimensions. The 40 mm slot spindle can be precisely adjusted in height using a conveniently positioned handwheel with 0.1 mm graduation. Gsdpfx Ajwwxzbjabouh The robust roller table, in combination with hardened and ground guides, can be moved with minimal effort. Slot spindle motor: 5.5 kW Slot spindle speeds: 3000/4500 rpm Spindle diameter: 40 mm Clamping length: 140 mm Slot spindle height adjustment: 100 mm Extraction port: 120 mm Cross-cut saw motor: 2.2 kW Saw speed: 2,950 rpm Saw blade mount: 30 mm Max. saw blade diameter: 400 mm Max. cutting height: 125 mm Pneumatic tool clamping With Festo LAS stop Weight approx. 600 kg Availability: at short notice Warehouse location: Flörsheim

Condition: excellent (used), Tenoning and Slotting Machine WEINIG Type 51 Pivoting studio window device with digital angle display Rolling table with automatic feed rate of 6 m/min. Rolling table length approx. 2,100 mm Pneumatic workpiece clamping Automatic countershaft change Crosscut saw Pneumatically timed 4-station turret Motor approx. 3 kW / 380/400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Gjdev Tb Hgspfx Aabsuh Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380/400 V / 50 Hz Spindle speed 3,000 rpm Tool diameter max. 320 mm Length stop system Machine including operating tools Installation dimensions L x W approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Errors in technical specifications and prior sale excepted. • Prices quoted are for pickup from the location - free shipping! • The machines have been cleaned and function-tested. • All machines are sold as seen without any warranty claims. The buyer is free to inspect the machines on site. • Special agreements are only possible in writing. (We will only respond to inquiries if you provide your address and telephone number!)

Condition: excellent (used), CATALOGUE NUMBER 5503 TECHNICAL DATA - 2.2kW engine - 380V power supply - dimensions length/width/height 1870x1050x1220mm Gedped Snfgsfx Aabouh - weight 846kg Machine equipped with: - 2 tables with angles measuring 380x330mm - pneumatic clamps - tables adjustable angularly in two planes - tables allow for making long and round tenons - tables adjustable up/down - tenon width adjustment - central lubrication - unpainted - Italian production - two stations - pneumatic - solid machine Net price: PLN 18900 Net price: EUR 4450 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of greater exchange rate fluctuations the price may change)

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Pen machine Gedoxd A D Rspfx Aabsuh - inclinable guide +/- 45° - 2 pneumatic pushers - saw * 3 kW motor power * saw blade diam. 400 mm - pin heads * motor strength 2.2 kW * diam. heads 160 mm * heads length 150 mm * max. opening 185 mm - toupie * shaft length 190 mm * shaft diam. 50 mm * motor strength 5.5 kW * max tool diam. 320 mm

Condition: used, Year of construction: 1984, second hand Make Löwer Type ZA 3000 Year of construction 1984 Machine no. 5485 Motor 1.5 kW motorized brakes Number of spindles 2 x vertical saw, horizontal milling cutter Clamping height 200 mm Diameter 40 mm Cross-cut saw Table size 800 mm x 350 mm Rotatable stop Stop ruler 2000 mm, Festo LAS stop system Manual workpiece clamping Extraction connection 120 mm Required space approx. 1700 mm x 1700 mm x 1600 mm Storage location 97447 Gerolzhofen, free on truck, unpacked Handover in the current condition, as viewed, without overhaul, Godpfsvwf I Asx Aabjuh without guarantee and warranty

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Gsdpfxsg Uxgfj Aabsuh -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 190 mm -Height: 90 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 9.9 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 185 mm -Height: 75 mm Guedpfx Ajg Uxgioabsh -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 5,8 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Gedpsg Uxgujfx Aabsuh -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 195 mm -Height: 100 mm -Socket: Ø 40 mm -Weight: 9.1 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm Godpfxjb A Tabs Aabsuh -Weight: 9 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit disk milling tool for: wooden windows -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg Gsdsb A S Tbspfx Aabouh

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 207 mm -Height: 75 mm -Socket: Ø 40 mm Gujdjg Uxf Nopfx Aabeh -Speed: up to max. 6000 rpm -Weight: 6,7 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool Guedpfxsb A S U To Aabeh -Socket: Ø 50 mm -Weight: 14 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left right tool -Socket: Ø 58 mm Godpfxeb A Taas Aabsuh -Weight: 15 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools Godpfx Aaeb A I Hlobjuh -Slit discs, milling tool for: wooden windows -Manufacturer: OPPOLD -Socket: Ø 40 mm -Number: 1x pallet tool, different sizes -Weight: net 46 kg

Condition: used, Tenoning machine, tenon cutting machine, tenon hunter, slot rotor, tenon cutting and slotting machine, slot and tenon milling machine -Manufacturer: Festo, tenoning and slotting machine -Type: ZA 101/S -techn. Data: see nameplates/photos Gujdpfx Aajf D H E Nobjh -Dimensions: 1675/1545/H1330 mm -Weight: 546 kg

Condition: used, Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system Gujdpfocvtzlox Aaboh -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools Guodpob A S U Rsfx Aabeh -Slit discs, milling tool for: wooden windows -ZUANI Super Compact Fix -left tool -Socket: Ø 50 mm -Weight: 14 kg

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools, wood milling tools, wood milling cutters, Slit discs, milling tool for wooden windows, wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Gjdpfeg Uxgbjx Aabouh -Manufacturer: VIVALDI, window milling tool -External milling cutter: Ø 172 mm -Height: 100 mm -Socket: Ø 40 mm -Speed: up to max. 6000 rpm -Weight: 8.2 kg