Maschinenhandel

Condition: good (used), wood sawdust compressor, 16.5 kW, 50 Hz Prjdpfszz Rqgox Alwob

Condition: excellent (used), Year of construction: 2023, operating hours: 100 h, functionality: limited functionality, crosline650 Psdpfszz Hwijx Alwsrb

Condition: like new (used), Year of construction: 2023, operating hours: 100 h, functionality: fully functional, nominal power: 9 kW (12.24 HP), overall weight: 2,100 kg, type of input current: three-phase, The Crossline 650 automatic cut-off saw is equipped with a rotating table and a 650 mm diameter saw blade that can rotate +/-70°. Material inserted into the machine is automatically detected, and its length is determined. The material is then fed using a push-type clamping device. Cutting accuracy is ensured by two independent upper and side clamping devices. Once the material is firmly clamped, the saw blade rises for cutting. After cutting, the material is pushed onto the output table. Prsdpfx Alezz A Iwewob The machine can operate in manual mode or automatically, connected to the WinCreator software or with data from other commonly used programs. Crossline 650M The Crossline 650M is equipped with a grooving module. Its use is intended for situations where the production of trusses needs to be combined with cutting material for wall panels, ensuring precise positioning of studs and components in the structure. Thanks to its functionality, the Crossline 650M is an efficient, comprehensive solution and is often an alternative to complex machining centers in the prefabrication of wood-based panels. Groove width max. 60 mm (depending on the tool). Technical data for Crossline 650 and 650M: Industrial PC Beckhoff with 12" touch screen Saw blade Ø 650 mm, 2800 rpm, motor 7.5 kW Blade stroke adjustment Cutting accuracy ± 0.5 mm/meter Feed rate 0-60 m/min Automatic material measurement Cutting diagram for Crossline 650, 650M

Condition: good (used), wood impregnation line Prjdpfozwx Nijx Alweb

Condition: new, chipper heads R200 Podpfx Aszwx H Ielwjrb

Condition: good (used), functionality: fully functional, Staircase cheek milling machine, Engelhart Riser and tread milling machine, TWF 1000 Year of manufacture: 1984 400 volts, 2.8 / 3.5 kW 2 speeds: 1390 / 2830 rpm Runs in both directions (left and right) Material clamping with foot pedal Clamping dimension, max. 130 x 10 cm New pressure reducer Undercarriage Chip collection – Extraction hose Includes 16 mm milling cutter Dimensions: 180 x 100 x 180 cm Psdpozv Ehcjfx Alworb Weight: 400 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, Rated power consumption 3000W (Cuprex high-performance motor), rated voltage 230V 50Hz, rated no-load speed 4050 rpm, milling head 15 x 115 x 30 mm, cutting depth 0-70 mm (83.5 mm), swivel range 0-60°, weight approx. 20 kg, cutting speed 31.8 m/s. Psdpfx Aozvyb Djlworb

Condition: new, Year of construction: 2026, operating hours: 1 h, total length: 9,000 mm, total width: 3,600 mm, total height: 700 mm, construction width: 3,600 mm, table height: 700 mm, table length: 9,000 mm, BOOSTON ER-00/900 – 9.0 m WORK TABLE FOR HOUSE PREFABRICATION BOOSTON MACHINERY is a manufacturer of machines and equipment for house prefabrication plants. We produce work tables, assembly tables, rotary tables, butterfly tables, and complete production lines for the prefabrication of wooden structures. TECHNICAL DATA Prodpfxeztpzno Alwob ➡️ Table working length: 9000 mm Other available lengths: 4.5 m / 6.0 m / 7.5 m / 9.0 m / 10.5 m / 12.0 m / 13.5 m / 15.0 m ➡️ Table working height: 700 mm ➡️ Table working width: 3600 mm – other widths can be manufactured ➡️ Height range of prefabricated wall using SD-01 clamping cylinder: 200–3400 mm ➡️ Vertical locking pins: 0–240 mm, diameter 35 mm (infinitely adjustable) ➡️ Hole spacing for SD-01 clamping cylinders: 150 mm ➡️ SD-01 cylinder stroke: 160 mm ➡️ Horizontal transport of finished elements – optional: a set of pneumatically lifting rollers – 2 lines of rollers, 620 mm wide ➡️ Table type: fixed table – without drives and motors ➡️ Pneumatic power supply: 8 BAR – only for the ER-00R version equipped with pneumatically lifting transport rollers ➡️ Maximum permissible load: 100 kg/m² of finished prefabricate, with a maximum element height of 3000 mm ## ADDITIONAL OPTIONS 1. SD-01 clamping cylinders 2. Set of pneumatically lifting rollers – 2 lines of rollers 3. Removable starting strip LS-01 ## BOOSTON ER-00 The ER-00 work table is an economical and efficient workstation designed for the prefabrication of walls and other elements in wooden frame construction. The table structure consists of two work sections connected by removable internal crossbars. This solution provides convenient access to the prefabricated element and allows the workstation to be adapted to the production process. The ER-00 works with SD-01 clamping cylinders, which help maintain the proper geometry of the structure during nailing and screwing of wooden elements. The modular design also allows for later expansion of the table – e.g., from 6 m to 12 m in length. The ER-00 table can operate as a standalone workstation or be connected to other BOOSTON equipment to create a complete production line for the prefabrication of wooden walls. An ER-00R version is also available, equipped with pneumatically lifting rollers, enabling horizontal transport of finished prefabricated elements between subsequent production stations. We manufacture our machines in Poland. Manufacturer: BOOSTON MACHINERY

Condition: good (used), Code: 0473 Brand: SCHNEIDER - GERMANY Model: SLK 300 - CE Standard Universal circular saw for cutting large-sized beams, wooden roofs, wooden walls, laminated beams and various applications - CE Standard Automatic workpiece feed with speed variator Blade diameter mm 800 Blade inclination 90 - 30 degrees with display Manual table rotation from 0 to 180° Cutting height at 90 degrees mm 300 Cutting height at 30 degrees mm 150 Cutting width mm 900 Motor power Hp 15 (Kw 11) Automatic raising of the blade with bimanual control Visualizing laser cutting light N° 2 pneumatic cylinders for clamping pieces with wheels Machine cover with manual opening Protection hood for longitudinal cuts Table size 1560 x 1560 mm Table height mm 940 Infeed roller conveyor mm 6000 x 650 Outfeed roller conveyor mm 6000 x 650 N° 2 suction inlets mm 150 Prsdpfx Aszquw Ajlwjb Compressed air 7 Atm Overall dimensions of disassembled machine : Machine mm 3200 x 2200 x 2200 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h - N° 1 Roller conveyor mm 6000 x 650 x 1050 h Weight kg 2200

Condition: good (used), functionality: fully functional, Chain mortiser LS 102 Rated power: 1800 W Rated voltage: 230 V, 50 Hz Rated idle speed: 4050 rpm Mortising depth: 100/150 mm (depending on the chain set) Prodpfxozi A Els Alwob Adjustable cross stop, steplessly adjustable from 8 to 150 mm Weight of the base unit: approx. 9 kg Slotting machine SG 500: Slotting depth, vertical/horizontal: 500 mm Slot width: 10-17 mm Slot length: 50 mm Weight: approx. 32 kg including guide rail + chain Guide frame FG 150 for mortising depth up to 140 mm

Condition: used, Condition: NEW with pneumatic clamping device. The universal assembly station for the production of wall, ceiling and roof elements in timber frame construction,ceiling and roof elements in timber frame construction. Prsdpjzhnafofx Alwob - Heavy-duty, basic structure of the machine frame for a flat work surface - Clamping of the elements via 9 system clamping beams with pneumatic pressure cylinders. The system clamping beams are extendable for element heights from 100 to 3,800 mm. The cylinder stroke is 320 mm, the clamping force per cylinder is approx. 420 kg/4,200 N. at 10 bar operating pressure It can be clamped in two groups of 5 pieces and 4 pieces, two elements can be clamped/worked on at the same time. - Planking of the work surface as far as technically possible with wooden panels. (A perforated metal panel is available as an option, as shown in the photo)) - Stop system at the bottom with 9 pins and at the side with 7 pins for dimensionally accurate elements. - Swivelling device of the assembly station via 3 hydraulic cylinders for panel weights up to panel weights of up to 4,000 kg to 85° (95°). The hydraulic system is compactly integrated in the frame area of the assembly station. - The electrical control cabinet is also installed underneath the assembly station for protection. - The functions are operated via a control bottle. - A compressed air connection and socket are installed on both ends of the station. and on the long side of the station there are 2 sockets and 2 compressed air connections compressed air connections for connecting hand-held devices. - The stations are modular in design, so that they can be expanded immediately or later with a to form a complete turning station. You can see a turning station in picture 3. - Further options: Assembly table without set-up function Perforated metal panels Other working dimensions on request Working area: - Maximum element size (W x H): 12,000 x 3,800 mm - Minimum element size (W x H): 1,000 x 100 mm - Cylinder stroke of the clamping cylinders: 320 mm - Stop/ socket pin height: 120 mm - Working height: approx. 700 mm - Colour RÁL 7035 light grey

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: AB/129942, F410 SURFACER Surfacing width: 410 mm Total table length: 2600 mm Table height: 855 mm Infeed table length: 1450 mm Adjustable aluminum fence, up to 45° Fence dimensions: 1100 x 170 mm 4-knife cutterblock, diameter: 120 mm Cutterblock rotation speed: 5000 rpm Motor power: 4 kW SCM surfacing guard integrated into the machine frame Dust extraction port diameter: 120 mm Manual star-delta switch Motor circuit breaker, undervoltage release Main switch, lockable Automatic motor brake Pjdpfx Alezadchsworb Adjustable auxiliary fence Available in ARDENNES

Condition: excellent (used), B66 Rotary Hammer - GBH-12-52 D - 1700 Watt - 230 Volt - Year of manufacture: 2018 Prsdpfx Aljy R U U Rjwsb - SDS max tool holder Was partially in use.

Condition: like new (used), GSH 11VC Professional Rotary Hammer - Weight: 11.4 kg - Absolutely as new - Comes with 3 new chisels - 1700 watts - SDS max Predpfx Alsy R U Nbjweb - Year of manufacture: 2018 Was placed in a service vehicle.

Condition: new, Year of construction: 2026, operating hours: 1 h, working height: 700 mm, total length: 9,000 mm, total width: 3,600 mm, BOOSTON MACHINERY – European Manufacturer of Machines Our company specializes in manufacturing machinery for the prefabrication of timber-framed houses. With years of experience in the design and prefabrication of residential buildings, we create production lines for small, medium, and large enterprises producing timber frame walls, floor systems, and roof panels. This listing offers the ASSEMBLY & ROTATION TABLE ER-01H with a length of 9 m (other lengths available: 6.0 m; 7.5 m; 9.0 m; 10.5 m; 12 m. The modular design allows for table extension, e.g., from 6 m to 9 m, in increments of 1.5 m). The ER-01H tables can be expanded with a second wing (control and hydraulic pump are prewired and ready to connect the second wing). TECHNICAL DATA: -> Working length: 9,000 mm -> Working height: 700 mm -> Working width: 3,600 mm -> Prefabricated wall height range with SD-01 clamping cylinders: 500–3,400 mm -> Adjustable vertical pins: 120–200 mm (40 mm step) -> Pre-drilled for SD-01 clamping cylinders -> Horizontal transport for ER-01H-R variant (optional): 3 rows of pneumatically lifted rollers (8 bar) -> Table drive: hydraulic -> Control: control panel -> Maximum load capacity: 2,500 kg (for 9 m table) ADDITIONAL OPTIONS: 1. SD-01 clamping cylinders 2. Set of pneumatically lifted rollers (3 roller lines) 3. Set of roller pins for vertical transport The single-wing ER-01H rotary table is a versatile workstation for the prefabrication of timber frame walls. ER-01H tables can function as standalone workstations or be integrated as a base/central/final station in a production line. ER-01H tables can be equipped with pneumatically lifted horizontal roller sets and vertical roller pins. The modular table design allows future length adjustments by replacing a few structural frame elements. Table rotation is possible from 0° to 81°, and can be unlocked up to 91° for production lines. We also offer dedicated transport trolleys for the ER-01H tables, enabling the transport of finished prefabricated elements from the table. Pjdpjy Iqk Nefx Alwjrb

Condition: ready for operation (used), Year of construction: 1997, machine/vehicle number: 4208 E, Makita carpentry mortise machine, type 5500 S Motor: 1,420 W, 230 volts, 50 Hz Longitudinal saw blade speed: 1,650 rpm Crosscut saw blade speed: 2,200 rpm Complete with R. Beck "Vario" saw and work table Pjdpfoy Id Sgex Alworb Workpiece length, max: 3,100 mm Adjustable angle: 0 to 45° Ex works, as inspected at the Seevetal location Excluding transport; subject to prior sale.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 20518, We are offering this used Schmidler S4 woodworking machine, manufactured in 2000. Manufacturer: Schmidler Model: S4 Year of manufacture: 2000 Type of machine: abbundanlage (cross-cutting machine) - 4-strand cross-feed conveyor (inclined) - Infeed roller conveyor - Zero-point detection - Electronically controlled under-table swivel miter saw Predpfx Ajy Ewxzjlweb - Saw blade diameter 710mm - Rotation angle 360 degrees - Tilt 0-65 degrees - Waste wood discharge - Marking pen, horizontal (from below) and vertical (from behind) - Universal milling cutter including finger cutter and dovetail milling cutter - Horizontal drilling unit – rafter nail drilling unit - Vertical drilling unit - Powered outfeed roller conveyor - Pusher – pneumatic - Transport and measuring system - Conveyor belts to be replaced - Control system: sema btl Maximum component dimensions: Height 300mm Width 400mm Overall length approx. 21m Infeed roller conveyor Outfeed roller conveyor with pusher and stacking bars Machine used, fully functional, Conveyor belts to be replaced Machine can be inspected by arrangement. Available for sale immediately. If you have any questions or would like more information, please send us a message or call us.

Condition: used, Schmid swiveling assembly table 12x3 m with longitudinal rollers, device without hydraulic unit Pjdpfx Aey Afp Aolwsrb

Condition: good (used), stacker Saulus KY Prjdpoyw Nkgjfx Alwjb

Condition: good (used), Elevator conveyor Prodpfx Aoyw Nfqolwsb

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, total length: 6,000 mm, warranty duration: 12 months, total width: 3,600 mm, total height: 700 mm, WORKBENCH FOR ASSEMBLING WOODEN FRAMES Direct sale from the manufacturer BOOSTON MACHINERY CARPENTER'S BENCH · JOINER'S BENCH · ASSEMBLY TABLE FOR PREFABRICATION Available lengths: 4.5m; 6.0m; 7.5m; 9.0m; 10.5m; 12.0m; 13.5m; 15.0m DIMENSIONS - Working length: 6000mm (other lengths available) - Standard width: 3600mm - Working height: 700mm - Workbench for self-assembly - shipped on a large pallet (cost saving for you) Prodpfx Asyk H N Eelweb - Mounting holes for pneumatic clamps SD-01 - Option to expand with additional modules Additional options: - SD-01 pneumatic pressure cylinders - Option for pneumatically lifted rollers for horizontal transport (2 roller rows) - LS-01 base profile

Condition: used, Year of construction: 2010, The solution has been developed for the production of prefabricated exterior wall panels intended for house manufacturers. The system consists of three main components: one rail-mounted nailing bridge and two worktables. Pedpfx Aljykqxdewerb Nailing Bridge: The nailing bridge is designed for automated panel nailing using four nail guns interconnected with the corresponding opposite side. The system includes four nailing units which automatically perform nailing operations according to predefined nailing patterns at the respective worktables. The nailing portal is mounted on a floor-installed rail system bolted to the concrete floor, allowing the bridge-type nailing system to move between the two worktables as required. The system is equipped with photocells for positioning and safety control. Function • The rail-mounted frame is positioned in a neutral loading position between the two worktables. • The nailing operation is initiated from either of the two worktables. • The selected nailing pattern is executed automatically. • The nailing portal is activated to carry out the nailing process in accordance with the chosen pattern. Worktables: The worktables are designed with support grooves for positioning timber studs. These grooves are adjustable via sliding mechanisms, enabling adaptation to different panel types and configurations. Function • The outer edges of the table are adjusted towards the panel using a manual control. • The selected battens are manually positioned to provide support for accurate panel placement. • The operator positions the components to be assembled into the appropriate grooves and against the battens. • The bridge-mounted nailing system is activated to perform nailing according to the selected pattern.

Condition: used, used, excellent condition, lightly used Manufacturer: Mafell Model: MKS 165 E CE type-certified Motor: 2.7 kW Brake motor Cutting height: 165 mm Blade diameter: 410 mm Predpfx Aoycxhkjlwob New price approx. €4,000.00 Warehouse location: 97447 Gerolzhofen, loaded free on truck, unpacked Sold as seen in current condition, without guarantee or warranty

Condition: new, Year of construction: 2026, functionality: fully functional, BS10U 80° 1-table solution is used when producing open panels, curtain walls or other open component (floor, roof). Available in lengths: 6000 mm, 7500 mm, 9000 mm, 12 000 mm. Can be equipped with a number of options: Hole beams, adding flexibility in production of building elements less than 2250 mm in height or when producing angled shaped walls etc. Hydraulic squaring instead of the standard solution Pneumatic squaring. Pedpfx Asx Tdtnslwerb Extended width adjustment in production of elements higher than 3100 mm (< 3650 mm). Rollers for transport elements in horizontal position enables production lines with BS20 system.

Condition: used, Year of construction: 1995, SPINDLE MOULDER WITH LONG TABLE & POWER FEEDER Brand: ROBLAND Model: T120S-L-P Year: 1995 Machine offered as-is, without warranty SPINDLE MOULDER CAPACITIES: - Spindle diameter: Ø50 mm Useful length (above the table): 150 mm Vertical spindle stroke: 205 mm - Spindle speeds: 3000/4500/6000/7000 rpm MACHINE SPECIFICATION: - Sturdy welded steel frame - Cast iron table (LxW): 310x190 mm Side extensions: 670x250 mm Frontal table extension: 2460x620 mm with entry roller Table rings: Ø350; Ø250; Ø200 Raised tool passage in table: Ø320 x 95 mm - Wooden fences: 530x150 mm Fine adjustment of the hood and indexed stops Maximum tool diameter for guide work: Ø250 mm TENONING: - Sliding tenoning carriage 760x500 mm Equipped with graduated transverse stop with adjustable end stop Adjustable support arms ensure complete rigidity of the carriage rail - Adjustable tool approach table with eccentric clamp - Angular adjustment of the fence with graduation from 0 to 45° - Tenoning hood guard - Maximum tenoning tool diameter: Ø350 mm Equipped with a power feeder: - Brand: Polymatic Year: 1996 Predpfxox Igzqj Alwob - Power: 0.75 kW - 3 rubber feed rollers - 2 feed speeds (mechanical and electrical) OTHER CHARACTERISTICS: - Electrical supply: 380V, 3-phase + T, 50Hz - Manual star-delta starting - Installed power: 6.25 kW - Main motor power: 5.5 kW (7.5 HP) - Lockable isolator, emergency stop button - Safety guard for guide operations - Dust extraction inlet on spindle hood Ø120 mm Lower suction port Ø120 mm Dimensions (LxWxH): 270x165x165 cm Weight: 800 kg