ERA GmbH

ERA GmbH from Baden-Baden

Schwerpunkte unseren technischen Qualifikationen sind:

- Schlüsselfertige Technologielösungen
- Optimierungen für die Metallbearbeitung
- Schulungen und technische Unterstützung

Ausgehend von der Zeichnung des Kunden oder dem Musterwerkstück, erarbeite ich auf Basis von Projektvolumen und Budget eine umfassende Lösung für meine Kunden, oder optimiere bestehende Prozesse mit maximaler Wertschöpfung und vorhandenen Produktionsmittel mit minimalen Investitionen.

Das Konzept:

- Kurze Realisierungszeit
- Umfassende Aufgabenlösung
- Gründliche Projektaufarbeitung
- Garantiertes Ergebnis oder Endprodukt
- Die Verwendung von Sonderlösungen
- Genaue nachfolgende Produktionskontrolle auf der Grundlage der Einrichtungsblätter und Bearbeitungszeitkarten
- Anwendung von besten Technologien bei der Umsetzung des Projekts
- Genaue Berechnung der Realisierung des Projektes - seiner Rentabilität

Vielen Dank für Ihre Aufmerksamkeit

_________________________________________________________________________________________________

Технологии „под ключ“

Поставки комплексных технологических решений по металлообработке, автоматизации и машиностроению „под ключ“, с обучением и техническим сопровождением.
Получая от заказчика чертёж или пример заготовки, исходя из объёмов выпуска и бюджета проекта, производится подбор, комплексного решения.
Имея большой опыт и широкие партнерские связи, можем рассмотреть самые различные задачи и готовы предоставить наше решение для вашей проблемы.

КОНЦЕПТ ПОСТАВОК ТЕХНОЛОГИЙ
• Комплексное решение задач
• Глубокая проработка проекта
• Короткое время реализации
• Гарантия на результат или конечный продукт
• Точный расчёт реализации проекта, его доходности
• Точный последующий контроль производства на основании листов настройки и карт времени обработки
• Лучшие европейские технологии в реализации проекта
• Специальные, индивидуальные решения

ПРЕИМУЩЕСТВА

• Значительная экономия при поставке комплексного решения:
- Инструменты входящие в проект поставляются как оснастка 30% экономии
- Цена инструмента в Германии дешевле до 50%
• Последующие поставки инструмента дешевле до 20-25%
• Гарантия на сервисные поставки запчастей через Германию
• Минимальные риски в эксплуатации оборудования
• Обучение персонала по европейскому уровню и стандартам
• Предоставляем сервис по последующему технологическому сопровождению:
- Программирование
- Технологии
- Конструкции
• Значительная экономия средств через использование в проектах оборудования со вторичного рынка.

Благодарим за внимание

Mr Vladimir Timofeev
Quettigstr.12
76530 Baden-Baden
Germany
Baden-Württemberg

Current offers from similar dealers

Listing

Germany

6,932 km

CNC turn-mill center
MügaTT 42

Call

Listing

CNC Turning & milling center MAZAK QTN 200 II-MSY

Schweiz

6,913 km

CNC Turning & milling center
MAZAKQTN 200 II-MSY

Call

Condition: excellent (used), With sub-spindle With C-axis, with Y-axis MAZAK Mazatrol Nexus control Turning length -538 mm Swing Diameter -675 mm Turning diametre 380 mm Spindle speeds 35- 5'000 + 35- 6'000 rpm Tool changer with 16 driven positions Bar loader Tool presetter device Piece catcher attachment Iedpfxoxpugbe Aabetn Misc. accessories MARCELS MASCHINEN CH

See details

Listing

Mazak QT 15N spare parts Mazak QT 15N spare parts

Herk-de-Stad

7,129 km

Mazak QT 15N spare parts
Mazak QT 15N spare parts

€1,150

Fixed price plus VAT

Call

Listing

CNC turn-mill center DOOSAN Puma 4100XLMC mit Lünette

Nordrhein-Westfalen, Deutschland

6,955 km

CNC turn-mill center
DOOSANPuma 4100XLMC mit Lünette

Call

Condition: good (used), Year of construction: 2018, CNC lathe DOOSAN Puma 4100XLMC with Fanuc control; Only 2,000 spindle hours!!! Itjdpfxoxph U Ee Aabon 3m turning length with programmable hydraulic steady rest SLU 4; Spindle bore 165 mm; All axes are flat-guideways – suitable for heavy-duty machining; Spindle with gearbox – over 2,400 Nm; Chip conveyor, tool setter, extraction system; 380 mm chuck installed, plus an additional 530 mm chuck; Various fixed and driven tool holders;

See details

Listing

CNC Turning and milling center NAKAMURA NTJX

Lüneburg

6,777 km

CNC Turning and milling center
NAKAMURANTJX

Call

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Iedpfx Aajxphk Tsbotn Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

See details

Listing

Fröndenberg/Ruhr

6,953 km

CNC turn-mill center
WFL MillTurnM40

Call

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Turning length: 3,000 mm Swing diameter over cross slide: 520 mm X-axis travel: 600 mm Y-axis travel: 150 mm Z-axis travel: 3,150 mm Swing diameter: 520 mm Turning length: 3,000 mm Control: SIN 840 D Siemens Z-axis: 3,150 mm Z-axis feed rate: 1 – 40,000 mm/min Rapid traverse Z-axis: 40.00 m/min X-axis: 600 mm X-axis feed rate: 1 – 30,000 mm/min Rapid traverse X-axis: 30.00 m/min Main spindle S1 Spindle speed range: 1 – 3,300 rpm Drive power at 100% load: 29.00 kW Spindle nose DIN 55026 – size A11 Spindle diameter at front bearing: 160 mm Spindle bore: 115 mm C-axis: 360 x 0.001° Isdpfoxpfd Dox Aabetn Milling spindle S2 Tool holder: Capto C6 Infinitely variable speed range: 1 – 6,000 rpm Y-axis: -100 / +150 mm B-axis: -110 / +110° Tool magazine with 100 stations Total power requirement: 145 kW Machine weight approx.: 24 t

See details

Listing

Niederhelfenschwil

6,841 km

Turning and Milling Center
INDEXG 200

Call

Condition: used, Year of construction: 2001, turning length: 400 mm, turning diameter: 420 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, total height: 1,850 mm, bar diameter (max.): 60 mm, overall weight: 5,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, power: 44 kW (59.82 HP), number of spindles: 2, space requirement length: 2,450 mm, space requirement width: 1,400 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK BASIC FUNCTIONS .. design principle: inclined bed .. number of spindles: 2 .. - counter spindle: yes .. number of turrets: 2 .. number of c-axes: 2 .. number of y-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 420 mm .. turning diameter (max): 200 mm .. bar diameter (max): 60 mm .. worpiece length max.: 400 mm MAIN SPINDLE .. spindle revolutions (max): 5000 /min .. spindle bore diameter: 60 mm .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 5000 /min X/Z SLIDE .. number of tool positions (total): 14 .. - rotation speeds (max): 6000 /min .. - drive power: 5.5 kW TOOL MAGAZINE .. number of positions: 14 ELECTRICAL SPECIFICATIONS Itsdpfxexpdt Rs Aabjn .. total power consumption: 44 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2450 mm .. space requirements -front/back-: 1400 mm .. total height: 1850 mm .. total weight approx.: 5500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes Accessories - Chip conveyor - Iemca Master 880R bar feeder

See details

Listing

Turn-Mill Centre DMG MORI CTX Alpha 500 V6

Hungary

6,062 km

Turn-Mill Centre
DMG MORICTX Alpha 500 V6

Call

Condition: ready for operation (used), Year of construction: 2021, operating hours: 13,392 h, Control Unit Brand SIEMENS Model 840D with ShopTurn 3G Main Drive Spindle speed range 6000 Spindle motor power 13/14 kW Tool taper ISM 52 Synchro Number of axis 5 Media Chip conveyor Yes Ijdpfxsxn U Dke Aabetn Additional Equipment CELOS Products DMG MORI Service Agent DMG MORI NetService DMG MORI IoT Connector DMG MORI Messenger V2 SERVICE Camera Tail Stock the 2 SMW-Autoblok BBD17/52 which can also be seen on the machine chuck. and the addition of the software (tccentric turning and milling cycle, as well as a deburring toothing cycle). This 5-axis DMG MORI CTX Alpha 500 V6 was manufactured in 2021. A versatile turn-mill centre featuring a Siemens 840D controller, ERGOline interface, and CELOS manufacturing support. It offers a 470 mm machining length, 6000 rpm max speed, and a 12-position Sauter turret with live tooling. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Turning

See details

Listing

CNC turn-mill center Gildemeister CTX500

Freiberg am Neckar

6,841 km

CNC turn-mill center
GildemeisterCTX500

€5,000

ONO plus VAT

Call

Condition: used, Year of construction: 1999, operating hours: 56,000 h, functionality: fully functional, machine/vehicle number: 01780000621, turning length: 1,097 mm, turning diameter over cross slide: 320 mm, turning diameter: 455 mm, spindle motor power: 30,000 W, spindle speed (min.): 18 rpm, spindle speed (max.): 3,600 rpm, spindle bore: 107 mm, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, chuck outer diameter: 315 mm, The price includes various tool holders and 4 driven tools. Iedpfx Asxn Sfxjabetn

See details

Listing

CNC turning and milling center Takisawa TM-2000Y2

Budapest

6,100 km

CNC turning and milling center
TakisawaTM-2000Y2

€1,94,000

Fixed price plus VAT

Call

Condition: new, Year of construction: 2022, operating hours: 173 h, functionality: fully functional, machine/vehicle number: TJPM1003, turning length: 640 mm, turning diameter over cross slide: 215 mm, turning diameter: 215 mm, spindle motor power: 15,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 51 mm, travel distance X-axis: 190 mm, travel distance Y-axis: 90 mm, travel distance Z-axis: 660 mm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 12 m/min, rotational speed (max.): 6,000 rpm, type of input current: three-phase, bar diameter (max.): 51 mm, Equipment: documentation/manual, rotational speed infinitely variable, Japanese Takisawa TM-2000 Y2 turning center with two turret, and Y axis (both), sub spindle and Fanuc 0iTF Plus controller. Demo machine with 173 h running time. Options: Kitagawa BB206 3 jaw chuck for main spindle Kitagawa B206 3 jaw chuck for sub spindle SMW (Mario Pinto) PPBE-42 collet chuck for main spindle SMW (Mario Pinto) collet chuck for sub spindle Raku-Raku monitor controller option Abnormal load detection function 9 bar high pressure coolant Bar feeder interface Remaining bar discharge device Itedpfx Aaexn Sapsbjn Tool setter (manual) Workpiece unloader with conveyor Chip conveyor Static toolholders 2 pcs axial rotary toolholder

See details

Listing

Sweden

6,412 km

Turn-Mill Centre
DOOSANPuma MX2600ST

Call

Condition: ready for operation (used), Year of construction: 2013, operating hours: 15,000 h, Main Drive Spindle speed range 12000 Tool taper Capto C6 Number of axis 5 Movement Y-Axis Movement 230 mm A-Axis Movement 1550 mm Workpiece Workpiece drm over bed 1000 mm This 5-axis DOOSAN Puma MX2600ST turn-mill centre was manufactured in 2013. It features a maximum turning diameter of Ø 760 mm, part length up to 1540 mm, and bar capacity of Ø 76 mm. Equipped with a Fanuc 31i-A control, dual spindles with speeds up to 4000 rpm, and a milling spindle at 12,000 rpm. Includes a tool magazine with 80 positions and a swarf conveyor. Consider the opportunity to buy this DOOSAN Puma MX2600ST turn-mill centre. Contact us for more information. Application Types Itsdpfx Aaoxn Dl Dsben Turning

See details

Listing

Multi Axis MillTurn Moriseiki NT-3200 DCG

Bjärnum

6,605 km

Multi Axis MillTurn
MoriseikiNT-3200 DCG

Call

Condition: good (used), Year of construction: 2007, Brand: Mori Seiki Type: NT3200 Year of build: 2007 Serial number: NT320GA0030 Additional information: Run time: 7976H Maximum turning diameter (milling head): 600mm Maximum turning diameter (turret): 210mm Maximum turning length: 1045mm Spindel bore: 67mm Number of tool spaces: 40 Spindel: Kitagawa SS1666 Spindel speed: 5000 RPM Control system: Fanuc Series 31i Equipped with: tool presetter,Absolent AB oil mist filter, Enomoto chip conveyor, Ercoatius coolant filter, documentation Milling head Maximum speed: 12000 RPM Tool shaft size: C5 X-axis travel: 685mm Y-axis travel: ±125mm Z-axis travel: 1075mm B-axis travel: ±120° X/Z-axis rapid traverse: 50 m/min Y-axis rapid traverse: 30 m/min Turret Number of tool places: 12 Driven tool speed: 6000 RPM X-axis travel: 130mm Z-axis travel: 970mm X/Z-axis rapid traverse: 30 m/min Machine dimensions LxWxH: 5200x3100x3000mm Own weight: 14400 kg Including bar feder Brand: Iemca Type: VIP 80E II Year 2007 S/N: 020710QA07 Own weight: 605 KG Bar capacity: 6-80mm Itedpfxexn Ddts Aabon

See details

Listing

CNC Turning- and Milling Center DOOSAN Puma TT 1800 SY

Bühl

6,917 km

CNC Turning- and Milling Center
DOOSANPuma TT 1800 SY

Call

Condition: used, Year of construction: 2007, turning diameter 300 mm turning length 600 mm control FANUC, 18i-TB turning diameter over bed slide 230 mm travel x1 165 mm travel z1 700 mm travel x2 190 mm travel z2 720 mm travel -y axis +/- 50 mm main spindle bore 76 mm main spindle speed 5.000 U/min main spindle drive 22 kW max. torque on the spindle 208 Nm sub spindle bore 76 mm sub spindle speed 5.000 U/min sub spindle drive 22 kW max. torque on the spindle 208 Nm tool turret 2 x 12 Stat. number of driven tool stations 2 x 12 speed of driven tools 5.000 U/min max. torque 47 Nm work piece power 5,5 kW C-axis resolution 0,001 ° rapid traverse x + z axis 20 / 40 m/min rapid traverse y-axis 7,5 m/min total power requirement 68,4 kVA weight of the machine ca. 7,8 t Accessories: collet fixture on main spindle, hydr. 3-jaw chuck make KITAGAWA, BB 208, 210 mmø, on sub spindle, various tool holders for turret, bar loader make HYDRAFEED, model MULTIFEED MX-1B for bar dia. 3 - 80 mm and bar length up to 1650 mm, chip conveyor, coolant with belt filter device Ijdpfexn Amtjx Aabstn

See details

Listing

Günzburg

6,760 km

CNC lathe
INDEXG 300

Call

Listing

CNC turn-mill center Daewoo Puma 230 M 230M

Neuss

7,023 km

CNC turn-mill center
Daewoo Puma 230 M230M

Call

Condition: used, Daewoo Puma 230 M C Axis CNC Lathe Itsdpjxnw Avsfx Aabsn Year: 2000 Technical specifications - Control Unit: Fanuc 18i-T - Turning Diameter: Approx. 290–400 mm - Turning Length: 500–560 mm - C Axis - Turret: 12-station, (live tools) - Spindle Speed: 4500 rpm - Spindle Power: 15 kW - Bar Capacity: 65 mm - X-Axis Travel: 205 mm - Z-Axis Travel: 580 mm - Tailstock: Programmable counter-spindle - Chip Conveyor: Available - Bar Feeder: CK LOAD - Chuck: KITAGAWA B210, 3-jaw - Somme brand live tools will be provided.

See details

Listing

CNC turning and milling center Mazak Integrex 200Y

Timmergatan 11, 276 30 Borrby, Sweden

6,562 km

CNC turning and milling center
MazakIntegrex 200Y

€25,000

Fixed price plus VAT

Call

Listing

Niederhelfenschwil

6,841 km

Turning and Milling Center
INDEXG 200

Call

Condition: used, Year of construction: 2007, turning length: 400 mm, turning diameter: 420 mm, spindle speed (max.): 5,000 rpm, bar passage: 60 mm, total height: 1,850 mm, bar diameter (max.): 60 mm, overall weight: 5,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK, power: 44 kW (59.82 HP), number of spindles: 2, space requirement length: 2,450 mm, space requirement width: 1,400 mm, CONTROLS .. CNC controls SIEMENS SINUMERIK BASIC FUNCTIONS .. design principle: inclined bed .. number of spindles: 2 .. - counter spindle: yes .. live positions: yes .. number of c-axes: 2 .. number of y-axes: 1 WORKING RANGE TURNING .. swing diameter (max): 420 mm .. turning diameter (max): 200 mm .. bar diameter (max): 60 mm .. worpiece length max.: 400 mm MAIN SPINDLE .. spindle revolutions (max): 5000 /min .. spindle bore diameter: 60 mm .. c-axis: yes COUNTER SPINDLE .. spindle revolutions (max): 5000 /min .. c-axis: yes X/Z SLIDE .. number of tool positions (total): 14 .. - rotation speeds (max): 6000 /min .. - drive power: 5.5 kW TOOL MAGAZINE .. number of positions: 14 ELECTRICAL SPECIFICATIONS .. total power consumption: 44 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2450 mm Itsdpfexnv Tyex Aabon .. space requirements -front/back-: 1400 mm .. total height: 1850 mm .. total weight approx.: 5500 kg ATTACHMENTS (TURNING) .. chip conveyor: yes Accessories - Chip conveyor - Iemca Master 880MP bar feeder

See details

Listing

Germany

6,760 km

Mill-Turn Centre
CHIRONMill 800

Call

Condition: ready for operation (used), Year of construction: 2007, Control Unit Brand FANUC Model 18i MB5 Movement X-Axis Movement 800 Y-Axis Movement 500 Z-Axis Movement 550 Additional Equipment Approx. 20 tool holders included Bar loader short Knoll paper belt chip conveyor HL450/900 This 5-axis CHIRON Mill 800 was manufactured in 2007, featuring a swivel head, bar loader, internal cooling, and a Knoll paper belt chip conveyor. Equipped with a Fanuc 310i-model A5 and HSK-a-63, it includes about 20 tool holders. Consider the opportunity to buy this CHIRON Mill 800 turn-mill centre. Contact us for more information about this machine. Application Types Iodpfxsxnr Efs Aabetn Milling

See details

Listing

CNC Turning- and Milling Center MAZAK QT-Compact 200MY L

Hattingen

6,987 km

CNC Turning- and Milling Center
MAZAKQT-Compact 200MY L

Call

Condition: used, Year of construction: 2019, max. swing dia. 695 mm Itodpfexnqzlsx Aabon max. working diameter 340 mm Max. Turning length 500 mm spindle bore 76 mm control MAZAK SmoothC max. Spindle speed 5.000 U/min. turret stations 12 driven tools turning speeds 4.500 U/min CNC Turning- and Milling Center | MAZAK - QT-Compact 200MY L equipped with C- and Y-axes, a 12-station turret set up for driven tools, a tailstock, a chip conveyor, an automation package, and an LTA air filtration system The machine is in good condition and can be inspected under power. For further technical details, please refer to the attached offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: QTC200MYL | QTC 200MY L | QT-200MYL

See details

Listing

Schwäbisch Gmünd

6,799 km

CNC turn-mill center
DMGDMF360 linear

Call

Condition: used, Year of construction: 2011, DMF360 Base Machine Gantry Milling Machine X3600 Y1100 Z900mm Siemens 840D solutionline Fixed Table 4200 x 1100 mm Equipment / Accessories Built-in rotary table ø1050mm Swivel head as B-axis 20-18000 rpm Dynamic package X-Axis 80m/min Work area partition Measuring probe, laser tool measurement, tool breakage detection Electronic handwheel Blow air through spindle center Coolant supply 40/80 bar with band filter system, 1000 L tank Chip flushing and rinse gun Chip conveyor, discharge height 1250mm Air conditioning unit for drive and control cabinet Automatic doors A-Axis Lehmann EA420, right-side preparation Hydraulic clamping for fixed and rotary table Robot interface with contact pressure monitoring Interpolated turning High-speed settings Compcad – compressor function 3D machining, 3D tool correction Isdjxnqf Rspfx Aabetn Shutdown and automatic machine start Oil and emulsion mist extraction system

See details

Auction

CNC turn-mill center Gildemeister CTX-400 S2

Tacherting

6,589 km

CNC turn-mill center
GildemeisterCTX-400 S2

€3,050

2 days left

Details

Listing

CNC LATHE MAZAK, MADE IN JAPAN SUPER QUICK TURM 10 MS

Bloomfield Rd, Tipton DY4 9ET, UK

7,615 km

CNC LATHE
MAZAK, MADE IN JAPANSUPER QUICK TURM 10 MS

Condition: used, Year of construction: 1996, MAZAK SUPER QUICK TURN 10 MS CNC LATHE MAKE MAZAK, MADE IN JAPAN MODEL SUPER QUICK TURM 10 MS YEAR 1996 CONTROL MAZATROL T PLUS MAX SWING 435mm SWING OVER CARRIAGE 370mm MAX. MACHINING DIA 230mm MAX. BAR WORK DIA 42mm MAX DISTANCE BETWEEN SPINDLES 705mm SPINDLE MOTOR AC11kw (15HP) SPINDLE SPEED 6000rpm 2ND SPINDLE MOTOR AC5.5kw (7.5HP) 2ND SPINDLE SPEED 6000 rpm ROTARY TOOL MOTOR AC2.2kw (3HP) ROTARY TOOL SPEED 3000 rpm TURRET TOOL CAPACITY 12 TOOLS STATIONS RAPID TRAVERSE RATE X,Z:30m/min (1180IPM),C: 400rpm MACHINE DIMENSION L x W x H, 2705mm x 1465mm x 1835mm MACHINE WEIGHT 3850kg PLUS C-AXIS SUB SPINDLE DRIVEN TOOLS (3 NO.S) PARTS CATCHER SWARF CONVEYOR TOOL SETTING PROBE COLLET CHUCK Itsdpjxnpp Ijfx Aaben BUILT IN TRANSFORMER FULL SET OF MANUALS GOOD WORKING ORDER

See details

Listing

CNC turn-mill center Doosan Pumma TT1800SY

Brigachtal

6,895 km

CNC turn-mill center
DoosanPumma TT1800SY

Call

Listing

CNC turn-mill center Mazak QUICK TURN Nexus 200

Friesenheim

6,938 km

CNC turn-mill center
MazakQUICK TURN Nexus 200

Call

Condition: used, Year of construction: 2005, functionality: fully functional, Mazak Quick Turn Nexus 200 CNC lathe (2005) Manufacturer: Mazak Type: Quick Turn Nexus 200 Universal 500 CNC Lathe Year of manufacture: 2005 Mazatrol 640T control Iedexnngropfx Aabotn Condition: used, under power, in production Max. swing diameter 675 mm Max. turning diameter 380 mm Max. turning length 511 mm Speed range 35 – 5,000 rpm Main drive power 26 kW Max. torque 350 Nm Spindle bore 76 mm Number of tool positions 12 Rapid traverse X-axis 30.0 m/min Rapid traverse X-axis 30.0 m/min Tailstock mount MK5 Tailstock stroke 525 mm Number of tools 12 Turret indexing time 0.2s Length 2473mm Width 1780mm Height 1840mm Weight approx. 5000kg Scope of delivery – 1 set of manuals – Machine feet – Automatic parts catcher conveyor belt – Swarf conveyor hinge belt – Collet chuck – 6x tool holders – High-pressure pump 20 bar – Tool Eye – Bar loader prepared Note: without LTA oil mist extractor

See details

Listing

CNC Lathe with Y-axis, driven tools an 2 Mori Seiki NL 2500 SY / 1250

Zevenbergen

7,166 km

CNC Lathe with Y-axis, driven tools an 2
Mori SeikiNL 2500 SY / 1250

Call

Condition: used, Year of construction: 2008, turning diameter: 275 mm, spindle bore: 80 mm, spindle speed (max.): 4,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,345 mm, total height: 2,232 mm, total length: 4,339 mm, total width: 2,232 mm, overall weight: 7,600 kg, Equipment: documentation/manual, CNC Lathe with Y-axis, driven tools an 2nd spindle Iedpexnmzhsfx Aabstn CNC Control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 / 366 mm Spindle bore diameter 80 mm Spindle speed 4000 R/min Spindle motor 18.5/15 Kw Movement X-axis 260 mm Movement Y-axis +50 / -50 mm Movement Z-axis 1345 mm Movement W-axis (subspindle to mainspindle) 1275 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper BMT Bar feeder LNS Quick Load Servo lll Spindle motor driven tools 6000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

See details