Kündig Gmbh

Condition: used, Year of construction: 2006, SANDYA 7s Lodpsxqpwqefx Aa Ioru "RRCS" COMPOSITION

Condition: excellent (used), Year of construction: 2010, Belt sanding machine HEESEMANN LSM8 Year of manufacture: 2010, Serial no.: 2010.07.311 Power: 170 kW, Weight: 12,100 kg, Dimensions (W x H x D): approx. 450 x 280 x 250 cm Lrodexp I Ulepfx Aa Isu

Condition: excellent (used), Year of construction: 2013, Wide belt sander COSTA Series S7 XCTTX 1350 Year of manufacture: 2013 Serial no.: LB331014A Connected load: 98 kW Weight: 10,000 kg Lredpsxp I Tusfx Aa Iju Dimensions (W x H x D): approx. 350x320x350 cm

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, working width: 1,350 mm, overall weight: 10,000 kg, input current: 153 A, Heesemann LSM8 Surface Sanding Machine QLkLBw Sanding width: 1350 mm CROSS/LONGITUDINAL/LONGITUDINAL Machine Base Conveyor unit with a single transport belt, adjustable feed speed from 3 to 15 m/min by frequency inverter, including transport belt cleaning device. Constant working height of 920 mm. Automatic adjustment for various workpiece thicknesses (3 - 80 mm) via motor-driven movement of the upper machine section. The lifting gear’s toothed belt is dust-protected, and its operation is monitored via the integrated control cabinet. Lodjxp Hvnopfx Aa Ijru 1. Cross Sanding Unit Belt dimensions: 5,400 x 150 mm Drive power: 13/17 kW Sanding belt with additional blast tube for belt cleaning, wear-resistant brake unit, pressure segment belt system, intermittent belt cleaning system, and belt alignment control. Includes a door with glass window. 2. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Drive power: 13/17 kW Belt with double cleaning nozzles, wear-resistant brake unit, automatic belt length compensation, sanding belt operation counter to feed direction, intermittent belt cleaning, and infrared belt control. The front roller (steel) has an eccentric bearing for light calibrating, controlled from the operator terminal. 3. Longitudinal Sanding Unit Belt dimensions: 2,620 x 1,350 mm Belt speeds: 0.5 – 18 m/s Drive power: 17 kW with frequency inverter Continuously adjustable sanding belt speed, double cleaning nozzle setup, wear-resistant brake unit, automatic belt length compensation, counter-feed direction sanding, intermittent belt cleaning, and infrared belt control. 4. Brush Roller Unit Centrally height adjustable, includes extraction hood and press-on roller. Roller diameter: 150 mm Drive power: 1.5 kW Bristles: fiber 5. Workpiece Suction Device Ensures safe transport of workpieces shorter than 500 mm in the feed direction, with integrated extractor fan. Voltage: 400 V, 50 Hz Belt exchange: left Operator terminal: left 6. Ionization Bar (from above) Removes static electricity, including high-voltage transformer. 7. Workpiece blow-off device with rotating compressed air nozzles inside the frame. The machine is ready for operation at your facility after mechanical and electrical overhaul by an authorized Heesemann service partner. Fitted with a new conveyor belt. Commissioning and training at your site may be arranged subject to negotiation. Transport costs negotiable – loading included in the price. If you have any questions, feel free to contact me. Paweł Szczepański +48 795 517 258

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: LB431013A, working width: 1,350 mm, overall weight: 7,200 kg, power: 79 kW (107.41 HP), type of input current: three-phase, input voltage: 400 V, The Costa Levigatrici K7 CCCFF 1350 is designed for wood surface processing, including sanding, scaling, and brushing of solid wood, veneered, or laminated components. With a working width of 1350 mm and a high installed power of 79 kW, it is suitable for industrial use in woodworking shops, furniture factories, or production lines. It ensures high precision and excellent surface finish. We have two units of this machine, both manufactured in 2014. Technical Data: Power supply: 400 V / 50 Hz Lrodpsxm R Szjfx Aa Isu Installed power: 79 kW Year of manufacture: 2014 Total weight: 7.200 kg Working width: 1350 mm

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Technical Main Data - Grinding width: 1,350 mm - Working height: 900 mm (constant) Lodpfx Asxmwn Aja Isru - Workpiece thickness: max. 150 mm - Abrasive belt width: 1,370 mm - Segment grinding shoe - Weight: approx. 3,000 kg Drives 1st unit: 15–18.5 kW, belt speed 18 m/s 2nd unit: 11–15 kW, belt speed 18 m/s Contact roller diameter: 140 mm (combi unit) Feed: - Feed belt system: length 3,400 mm, width 1,350 mm - Feed drive: 0.7/0.9 kW (2 speeds) - Feed speed: infinitely variable, 2.5–13 m/min Extraction - Air velocity: min. 20 m/s - Machine resistance: approx. 800 Pa Compressed Air: - Operating pressure: 6–8 bar - Air consumption: approx. 28 l/min

Condition: used, machine/vehicle number: 008201, Max. machining width: 1350 mm Min. machining thickness: 200 mm Working Table: Fixed pass height No. Operating units: 3 Nr Lrodpfx Aasxmgyhj Iou

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, working width: 1,300 mm, overall weight: 4,000 kg, working height: 1,000 mm, height adjustment type: electric, transport height: 1,000 mm, Calibrating / Wide Belt Sander Manufacturer: Costa Model: 71 CCT 1350 Working width: 1300 mm Equipped with: 1x calibration roller (hard rubber approx. 80 Shore), 22 kW, sanding belt dimensions 1380 x 2620 mm 1x calibration roller – newly rubberized (hard rubber 60 Shore), 18.5 kW, sanding belt dimensions 1380 x 2620 mm 1x sanding pad, 15 kW 1x dust removal brush 1x blow-off unit Feed speed adjustable, 4 – 24 m/min. Conveyor belt with vacuum Vacuum blower with silencer Working height: 1000 mm Height adjustment of the upper machine part (easy integration into existing production lines) Ledjxl N Thopfx Aa Isru Connection: 380 V 50 Hz, 200 A Total connected load approx. 65 kW Dimensions approx. 3000 x 2500 x 2400 mm (LxWxH) Weight approx. 4000 kg

Condition: excellent (used), Year of construction: 1997, I sell the widebelt sanding machine COSTA 71 CTT 1350, year 1997. Configuration: 1pc. hard rubber cylinder 1pc electronic segmented pad 1pc electronic segmented pad Cleaning unit combined brush + air blow in the outfeed. Working width 1350mm Pressure shoes for short elements. Air-blow on all units. Vacuum underpressure table with integrated ventilator. Designed for the line, with fixed working height and moving aggregates. 3 motors total power 55kW Condition very good ! Ljdsxlk Rbspfx Aa Ijru Available immediately.

Condition: new, Year of construction: 2018, functionality: fully functional, machine/vehicle number: 0-256-25-0756, total width: 1,850 mm, total height: 2,290 mm, total length: 2,390 mm, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,000 kg, grinding height: 200 mm, working height: 200 mm, power: 33 kW (44.87 HP), grinding belt speed: 1,600 mm/s, conveyor belt speed: 1,500 mm/s, grinding belt length: 2,150 mm, workpiece height (max.): 200 mm, pass-through height: 200 mm, Homag SWT 225 CH OPTIMAT, wide belt sander, new, opportunity! Lredpjxlgfzofx Aa Iju

Condition: excellent (used), Wide Belt Sander SCM Sandya 20 3M 135 Working width: 1350 mm Working height: 3-170 mm Number of sanding units: 3 Steel calibration roller: 18.5 kW Rubber roller: 12 kW Combi unit with segmented pad: 11 kW Cleaning brush at outfeed Vacuum pump Feed speed adjustable via frequency inverter Optical oscillation Ledpfx Ajxhgr Hea Ijru Sanding belt: 1370x2620 mm

Condition: good (used), Year of construction: 1989, functionality: fully functional, grinding width: 1,350 mm, The wide belt sander is in good condition and has been professionally and carefully maintained. Sanding width 1350 mm, 2 units, conveyor belt was replaced in 2017. Width 2000 mm, length 2500 mm, height 2000 mm + 30 new sanding belts included For more information, please contact via email or phone. Private sale, therefore no returns, no warranty, and no guarantee. The sale is made under exclusion of any liability. No shipping Lrsdpfx Aoxgnz Hsa Iou

Condition: used, Year of construction: 2000, operating hours: 1,000 h, functionality: fully functional, feed length X-axis: 1,380 mm, total width: 2,000 mm, total height: 2,500 mm, total length: 6,000 mm, working width: 1,380 mm, grinding width: 160 mm, overall weight: 2,000 kg, Double-sided calibrating machine (top and bottom) Costa, maximum working width 1380 mm and height between 3 and 160 mm. = PRICE 65,000 euro Lrjdpfxoxgcr Hj Aa Isu

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG Sandteq w-300 Technical Data: - Feed belt speed: 2.5 - 13 m/min - Working height: 900 mm - Working width: 1350 mm - Number of processing units: 2 - Workpiece thickness: 3 - 160 mm with automatic measurement Ljdpfx Aajxczmzs Ieru - Machine dimensions (LxWxH): approx. 2115 x 2100 x 2415 mm - Machine weight: approx. 4000 kg - Total electrical power: approx. 39 kW - Recommended main fuse: 80 A - Vacuum table - Q = Cross sanding unit Poly V-belt / 13.5 kW (2-16 m/s) - X = Combination unit with contact roller & pressure beam system / 18.5 kW (2-18 m/s) - Super-finish function: calibration, veneer & intermediate lacquer sanding, veneer & fine lacquer sanding - Brushing unit - Cleaning rotator with ionization - Powercontrol with Powertouch The machine is available immediately. Loading onto truck possible.

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 0411491768, total width: 2,000 mm, total height: 2,040 mm, total length: 1,335 mm, working width: 1,350 mm, grinding width: 1,350 mm, power: 15 kW (20.39 HP), grinding belt length: 1,900 mm, workpiece height (max.): 150 mm, workpiece width (max.): 1,350 mm, Number of units: 1 piece (combo - roller/shoe) Working width: 1350 mm Abrasive belt width, length: 1370 x 1900 mm Constant working height: 900 mm Workpiece thickness: 3 - 150 mm Drive motor: 15 kW Lodsxch Apspfx Aa Ioru Belt speed: 2 - 18 m/s Feed speed: 2.5 - 13 m/min Connected load total: 19 kW Top section adjustment Belt air blast Rear table extension, foldable

Condition: good (used), working width: 1,350 mm, HESEEMANN LSM8 Lredpfx Aasxcg Scj Ieu

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m Lredpfx Aajxcg Hmj Iju

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, On offer: A 3-belt wide belt sander with vacuum table Manufacturer: Viet S.p.A. Italia (Woodworking Machinery) Model: Challenge 323-A RRTEL Year of manufacture: 2003 Weight: 2470 kg Operating hours: -- Max. workpiece width: approx. 1300 mm Working area: Calibration and wide belt sanding of wooden workpieces Multiple units configurable (calibrating, sanding, fine sanding) Electrical data: Voltage: 400 V Phases: 3~ AC Frequency: 50 Hz Rated current: 96 A Largest consumer current: 42 A Protection switching capacity: 10 kA Specifications: Calibration/sanding units: 3 (model 323-A) Typical belt width: approx. 1300 mm (depending on version) Lsdexb E Dzjpfx Aa Ioru Passage height: approx. 150 mm

Condition: good (used), functionality: fully functional, Wide Belt Sander CB 1300 R+RR Specification: • Condition – used, after comprehensive inspection and calibration • Manufacturer – CB • Model – 2NRKRR13002N • Working width – 1300 mm • 2 sanding units: - First: calibration roller, made of hard rubber – diameter 230 mm Ljdpfsw U D Dujx Aa Isru - Second unit: 2 rollers, hard and soft, each with independent adjustment, diameter 160 mm each • Main motors: 2 x 9.2 kW • Two conveyor feed speeds • Electronic indicator for workpiece thickness • Photoelectric sensor-controlled oscillation • Infeed/outfeed extension rollers • Electric up/down adjustment • Thickness gauge for sanded material • Safety sensor to prevent oversized material entry • Original paintwork • Sanding belt size – 1340 x 2200 mm • Extraction ports – 3 x 180 mm • Weight approx. 2200 kg • Machine from the early 1990s • Dimensions: 200 x 220 x 210 cm (L x W x H) Additional Information: • Excellent original technical and visual condition • Photos shown reflect the actual condition of the item for sale • On-site power-up and inspection possible

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, grinding width: 1,320 mm, grinding height: 160 mm, Wide Belt Sander SAC Project RT 1320 Specification: • Condition – used, fully serviced and calibrated • Manufacturer – SAC • Model – Project RT 1320 • Working width – 1320 mm Lrodew U Dxfspfx Aa Iou • Maximum working height – 160 mm • Two sanding units: - First unit: calibrating roller made of hard rubber, diameter 300 mm (brand new, recently resurfaced) - Second unit: platen with sectional shoe and jump-in/out function • Dust extraction brush at the outfeed • Main motors: 10 and 11 kW • Total machine power at full load – 28 kW • Machine operated via touchscreen panel with memory for various programs and settings as required • Capability to operate in manual mode (user-defined parameters) or automatic mode (pre-saved programs with settings and parameters) • Stepless adjustment of the second unit’s rotational speed • Stepless feed speed adjustment • Electronic thickness gauge for the workpiece • Vacuum pump included • Belt cleaning/blow-off mechanism • Oscillation controlled by photoelectric sensors • Conveyor in very good condition • Extension roller tables included • Material thickness measuring gauge • Sensor to prevent feeding elements that are too thick • Original paintwork • Abrasive belt size – 2620 x 1320 mm • Extraction ports – 3 x 175 mm + 120 mm from brush • Weight – 2300 kg • Year of manufacture – 2001 • Overall dimensions – 255 x 205 x 230 cm (L x W x H) Additional information: • Excellent original technical and visual condition • Provided photos show the actual condition of the item for sale • Possibility to connect and test the machine on site

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: MODEL: Excel 2NRKRT 2-BELT MACHINE 1ST BELT ROLLER, 2ND BELT COMBINATION UNIT ROLLER/SHOE FOR SOLID WOOD, VENEER AND INTERMEDIATE LACQUER SANDING - Usable WORKING WIDTH mm: 1350 - SANDING BELT LENGTH mm: 1370 x 2150 - MAX. WORKPIECE THICKNESS mm: 160 - STEEL CALIBRATION ROLLER mm: 180 Lredpjw Tfwtjfx Aa Iju - Rubber-coated SANDING ROLLER mm: 180 - SANDING SHOE WIDTH mm: 50 - MAIN BELT MOTOR POWER kW: 14.7 - BELT SPEED m/s: 18/16 - FEED MOTOR POWER hp: 0.75 - Infinitely variable feed belt gearbox, speed adjustable m/min: 4/20 - HEIGHT ADJUSTMENT MOTOR hp: 0.33 - Mechanical BELT OSCILLATION "ECO GEAR PATENT SYSTEM" - 1 pc. DRUM BRAKE for belt braking - Pivoting ROLLER for belt tensioning - 3 pcs. PRESSURE ROLLERS with rubber coating - EMERGENCY STOP BAR at infeed Availability: short notice Location: Flörsheim

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: A51227GM1, For sale: used wide belt sander COSTA LEVIGATRICI CCC 350. Year of manufacture: 2006. The machine is fully operational. Serial number: A51227GM1. Input current: 118 A. Input voltage: 400 V. Motor voltage: 50 V. Ledpew S H Nhefx Aa Isru

Condition: used, Year of construction: 2007, Bütfering SCO 313 QEH 1. Cross Sanding Unit "Q" Segment width: 25 mm Unit type: Cross sanding unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 13.5 kW Belt speed: 1-16 m/s Belt dimensions: 5360 x 150 mm Belt air cleaning 2. Unit with Electronic Pressure Beam "E" Segment width: 25 mm Unit type: Unit with electronic pressure beam Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 7.5 kW Belt speed: 2-18 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning 3. Unit with Pressure Lamella Belt "H" Segment width: 25 mm Unit type: Unit with electronic pressure beam and internal lamella belt Pressing element: CPS 2 system with variable sanding and edge pressure Motor power: 20 kW Belt speed: 1.5-12 m/s Belt dimensions: 2620 x 1350 mm Belt air cleaning Year of manufacture: 2007 Price: 17,500.- Lredpfsw Sh Apjx Aa Iou

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Completely checked and serviced Lsdpfsw R Hh Uex Aa Ieru Features and technical data: Includes combination unit with contact roller and sanding pad Height-adjustable contact roller for calibration Air-cushion pressure shoe controlled via the workpiece Four-way adjustable grit compensation Pneumatic belt tensioning device Rotating structuring brush at the machine's outfeed side Sanding width: 1350 mm Abrasive belt length: 1900 mm Pass-through height: 150 mm Main motor: 15 kW Feed speed steplessly adjustable from 2.5 - 12.5 m/min Infeed roller table Additional separate structuring brush Outfeed roller table Digital display device for the electro-motor driven workpiece thickness adjustment Automatic workpiece thickness setting Extraction port: 2 x 200 mm Required space approx. 2300 x 2000 x 2300 mm Feed belt is OK; has a defect in one spot (see photo) Weight approx.: 2500 kg Images show the machine in uninspected condition! Location: Flörsheim Availability: approx. 4-6 weeks after order confirmation.

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 MACHINE SEEKER ENQUIRIES: Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. MACHINESEEKER ENQUIRIES: Lredpew Naansfx Aa Iju Please understand that we do not offer this new machine outside our sales area in Germany (Rhine-Main area and North Rhine-Westphalia). These inquiries will not be answered. Equipment and technical specifications: The Master brings grinding to the point. It embodies the essence of our 75 years of experience in grinding technology. This means that it combines all the features essential for the fast, reliable production of perfect surfaces right out of the box. Nothing more, nothing less. The core model, the Kündig Master, is equipped with a calibration roller and a sanding pad unit and features a proven design that guarantees decades of high sanding precision – and all this across the generous working width of 1350 mm. A control unit is also on board, which quickly and easily achieves the desired result. The Sanding Units – Proven Combination The sanding units rely on the proven combination of calibration roller and sanding pad. For secure workpiece guidance, a parallel spring-loaded steel pressure roller is located at the machine inlet, and rubber pressure rollers are located between the sanding units. Calibration Unit (R): The calibration unit is a grooved rubber contact roller of proven hardness. It is ideally suited for calibration tasks, even with high chip removal rates if necessary. The level of the contact roller is continuously adjustable to compensate for the thickness of the abrasive grain. Segmented sanding pad (E): With the E-Plus configuration, the fine sanding unit features a segmented, electronically controlled sanding pad with a scanning width of 35 mm instead of the pneumatic version. This allows for even more precise fine sanding in the edge area of the workpieces. The edge pressure of the sanding segments is automatically controlled, but can also be precisely adjusted on the touchscreen to more precisely influence the sanding around the workpiece edges. Changing the graphite sliding coating is also quick and easy. The features - In a nutshell Construction: In terms of robustness and durability, the Master is in no way inferior to our other model series. It features the same solid construction that makes all our machines a forward-looking investment and is designed to deliver precise sanding results even after many years. Top adjustment: For over three decades, we have equipped our machines exclusively with top adjustment. Why? While more complex in design than table adjustment, it is also superior in many respects. The machine can handle heavier workpieces, maintains its precision more reliably, and offers the advantage of a constant working height. Workpiece dimensions: The upper section, i.e., the through-hole, is motorized and can be finely adjusted via a touchscreen. The maximum through-hole height is 160 mm. With a working width of 1350 mm, the Kündig Master offers a generous, tried-and-tested standard size.