Used Honing machines for sale (62)

Condition: used, Year of construction: 1980, Year 1980 Type Präzisionshonmaschine In our opinion, the machine is in good used condition Condition and can be viewed under power by appointment. Accessories, tools and clamping devices shown are only included in the scope Koljvdubxshccqtslp of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: like new (used), Year of construction: 2016, Never used honing machine Klolhev Iathsccqtjp

Condition: used, Functionality: fully functional, Sunnen MBB-1660G Precision Honing Machine. Make - Sunnen Model - MBB-1660 Kolhccqsv Sd Nhjtjlp Job Diameter Range - 1.5 mm to 165 mm Max. Job Length - 406 mm Max. Spindle Speed - 2500 rpm Machine suitable for any material, regular or odd-shaped parts. Good working condition. Please check out our other listings as well.

Condition: used, honing diameter 1,5 -160 mm stroke 400 mm centre height 200 mm total power requirement 0,37 kW weight of the machine ca. 0,750 t dimensions of the machine ca. 1,2 x 1,4 x 1,7 m WORKING RANGE -HONING- Stroke max. 170 mm Stroke min. 6 mm Stroke rate max. 60 /min Stroke rate min. 500 /min WORKING RANGE -INTERNAL HONING- Spindle speeds from 200 /min Spindle speeds up to 3000 /min ELECTRICAL CONNECTION DATA Kelev Nq Sqjhccqtelp Power consumption (total) 4 kW Supply voltage 400 V Mains frequency 50 Hz DIMENSIONS / WEIGHTS Space requirement -left/right- 1200 mm Space requirement -front/rear- 1600 mm Total height 1900 mm Total weight approx. 750 kg

Condition: used, Horizontal honing machine (cross grinding machine) PEMAMO HONING (Switzerland) Type MDR 120 E No. 293 Year of construction 1996 Honing range Ø 1.5 - 70 mm Spindle speed 310 to 1860 rpm infinitely variable Motor power 0.37 kW Mains connection 400 Volt, 50 Hz - Expanding diameter infinitely adjustable via handwheel - Semi-automatic expanding unit AR 340 with a repeat accuracy of 1 µm Klelhccova Rtvoqtep Expansion speed continuously adjustable from 1 to 120 sec. Dwell time infinitely adjustable from 0-30 sec. Automatic switch-off when the desired diameter is reached Automatic return to the initial diameter Repeat accuracy within 1 µm Honing range switchable in 2 stages Ø1.5-20 mm + Ø21-70 mm - Stepless spindle speed via variator gearbox - Start/stop via foot switch - Built-in cooling and lubrication system with oil circulation, honing oil tank with 15 liter pump - Support arm as round rod Ø 15 mm, length 320 mm, with adjustable stop ring - 10 honing tools for nominal diameters 8 / 10 / 12 / 15 / 16 / 17 / 19 / 20 / 25.4 / 30.5 - 31.5 mm Machine dimensions L x W x H: 1000 x 700 x 520 mm weight: 160 kg good condition The machine is used for the specialized honing of bores, e.g. piston cylinders, in order to to achieve the required dimensions, tolerance and high surface quality. Thanks to the honing machine, shape defects such as scratches, axis curvatures or waviness are eliminated.

Condition: good (used), Year of construction: 2012, Functionality: unexamined, machine/vehicle number: 25001, "General specifications: - Maximum grinding length: 150 mm - Axle height on the bench: 251 mm - Center height from the floor: 1190 mm - Maximum outer diameter of the workpiece: 360 mm - Maximum grindable workpiece length: 200 mm - Maximum loadable weight (at 100 mm): 150 daN - Total installable power: 55 kW - Machine weight: 7000 kg X-axis: - Maximum travel: 330 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Transducer: Linear decoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Z-axis: - Maximum travel: 590 mm - Maximum speed: 12 m/min - Resolution: 0.0001 mm - Converter: Linear encoder on axis (absolute) - Axis motor: 7.6 Nm / 3000 rpm Internal electric motor spindle: - Maximum revolutions: 36000 rpm (S6) - Grinding wheel motor power: 22 kW (S6) - Model: FISCHER MFM-1418/36/1HJDN16 - Maximum theoretical peripheral speed of the wheel: 50 m/s Workpiece headstock: - Spindle taper: Morse taper 5 / Asa 8 - Bar capacity: 38 mm - Speed range: 10 - 800 rpm - Torque: 58 Nm - Motor: 20 Nm / 3000 rpm Internal grinding wheel: - Diameter: 138 mm - Thickness: 49 mm - Maximum permissible speed: 6000 rpm Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request Klelhccqju Egagetop - Full supporting documentation (electronic format) including: Owner's manuals, drawings, certificate of conformity, consumables lists, back up files etc. - Nissan Asset Ref: AF201526 - Acquisition cost €345k+ - Professionally dismantled, marked, packed and stored in Liverpool, UK"

Condition: ready for operation (used), Year of construction: 2014, General Data Measurements width 1900 mm Measurements depth 3400 mm Measurements height 2600 mm Machine weight 6500 kg Main Drive Spindle speed range 1,100-1,900 rpm Spindle motor power 15 kW Additional Equipment Control cabinet Cable between control cabinet and machine CO2 extinguishing device (without CO2) This vertical honing machine was manufactured in 2014. The Lodi VHP 300 4T CN features a robust design with dimensions of 3400x1900x2600 mm and a net weight of 6500 kg. It supports a maximum workpiece diameter of 300 mm and height of 150 mm. Key capabilities include adjustable table speed from 10-500 rpm and a powerful grinding motor of 15 kW. Ideal for precision honing, the machine we have for sale includes essential accessories. Contact us for further details regarding this vertical honing machine. Application Types Klelhceuttb Secqtsp Honing

Condition: new, ACETI adjustable belt sander art. 17 Kelhccqokt Uu Eetolp Volt 400 - Three-phase Electric absorption : Kw 1.1 Rpm 2800 Belt width mm 120 Belt development mm 1500 Weight kg 75

Condition: good (used), Table 800 x 120 mm Swivel and tilt head Stroke: 800 mm Kelhjv Iayhjccqtelp

Condition: used, Technical details: honing diameter: Ø 400 mm stroke: 600 mm throat: 390 mm table-size: 1.550 x 780 mm table surface area: 1.400 x 480 mm table:: fest total power requirement: 4,1 kW Klslhcou Ngybscqtop Weight approx.: 2,8 t dimension machine xH: 2,0 x 1,2 x 4,35 m Further technical details: - longitudinal travel of machine table approximately 500mm - cross travel of machine table approximately 200mm - working height 350mm (non-adjustable) - distance column / table 0 - 200mm Equipment: - oil tank Ø 300 x 600mm - control panel i.D. *

Condition: used, Year of construction: 2011, Precision honing machine SUNNEN Eclipse EC-3500EM-27 Kolhccjvym Nmoqtslp S/N: 4S1-1123 1 shelf with partition 1 lighting structure

Condition: used, Honing machine DELAPENA #2 Klslhccqjvxlivetsp

Year of construction: 2002, Condition: good (used), Make: PLEIGER Type: HF 75 / 115 S 30 Control: Siemens Simatic panel Year: 2002 Stroke speed slide step 1 : 4 - 20 M/Min Stroke speed slide step 2 :0,3 - 3 M/Min Rotation chuck step 1 : 300 Rpm and 320 Nm Rotation chuck step 2: 100 Rpm and 1290 Nm Horizontal deep hole honing machine Horizontal tube honing machine Horizontal cylinder honing machine Horizontal pipe honing machine Fine finishing of cylindrical bores Kljlekvnc Sehccqtjp Specifications Metric US Standard Drilling depth 11500 mm Power on spindle 55 kW Speeds / ranges 300 Rpm Dimensions (Estimate) Length 25000 mm Width 2000 mm Height 2000 mm Weight 30000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 2018, Condition: excellent (used), machine/vehicle number: 360011, Fine grinding machine for high-precision and economical machining of large workpieces For flat honing of workpieces with special height, parallelism and flatness requirements in high diameters. - with energy-efficient torque grinding wheel drives Technical data Disk diameter: 1160mm Ring width: 341mm Maximum pressure: 3000daN Workpiece diameter: 6 - 420mm Workpiece thickness: 1 - 100mm Warranty Kjlhsir Ul Sjccqtolp 6 months legal warranty

Condition: good (used), Condition: Used Minimum diameter of sharpening points: 6 mm Maximum diameter of sharpening points: 55 mm Klolhccev Iaxkjqtep Spindle speed: 18-24-36 rpm Grinding wheel speed: 2800 rpm Power: 1.5 Kw Weight: 450 Kg Engagements: 1000 x 650 x 1250 mm

Condition: used, Technical details: lapping tool diameter: Ø 1000 mm material thickness: Auftrag ca. 8,0 mm Plate thickness: ca. 75 mm Klelhcju Uzzuocqtep internal diameter: 400 mm Weight approx.: 0,37 t dimensions: 1,2 x 1,2 x 0,3 mm boring diameter: Ø 290 mm Flange mounting: Ø 320 mm This work wheel can be used, for example, on a disk sanding, fine sanding and/or lapping machine. Application: Material removal for “gentle” processing of the workpiece surface, as well as keeping the tools flat The pattern (honeycomb) improves stock removal due to the additional cutting edges. This results in a good surface finish and evenness. Diamond and CBN lapping wheel/lapping plate Die Mittenbohrung Ø 290 mm weist eine Senkung mit Bohrung Ø 400 mm x 47 mm Tiefe auf. Verpackt in Holzkiste 11500 x1150 x 166 mm. *

Condition: used, Year of construction: 2011, Precision honing machine SUNNEN KGM-5000TCG Machine data Year of manufacture: 2011 S/N: 1K1-1081 Spindle speed: 250 - 3,700 rpm Diameter: min./max. 3.81/32 mm 1 front light barrier 1 control unit, swiveling Loading/unloading device Kslhovym Nasccqtslp Linear travel: approx. 1,200 mm Separate cooling unit Make: PFANNENBERG 1 sheet steel cabinet Doors: 2 Contents: 1 set of analog/digital measuring instruments, general machine accessories

Condition: used, Honing machine DELAPENA #1 Kjlhcevxlipjcqtjlp

Condition: ready for operation (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 34-8216, Ball finishing system 3 spindles with automatic feed. With RUEZ oil filter system ----- Please tell us your offer price. Sales only within Europe, including Turkey ----- For technical data, see handout. Without packaging; any warranty is excluded. If you want to dismantle the system yourself, please provide the relevant information in your bid. Ksloth Sbtohccqtolp We do not accept any liability for the accuracy of the technical data, for the completeness of accessories and tool equipment, or for compliance with all safety and environmental protection requirements specified in the accident prevention regulations.

Condition: refurbished (used), Single pass - progressive honing machine SUNNEN MHS 840 (like VSS 84) overhaul and electronic retrofit (see video and photos) 4 heads, 8-station rotary table This machine can be inspected under power in our warehouse Test run possible M i m u Machine Tools Gussago BS Italy Kslhcjvw Ddvecqtolp Single-pass honing is a type of honing process used for finishing internal cylindrical surfaces, where a tool with a fixed set of abrasive stones passes through the bore only once to achieve the desired surface finish and dimensional accuracy. In this process, the tool is typically designed with a specific shape and size, allowing for precise material removal in a single stroke

Condition: ready for operation (used), Year of construction: 1965, Functionality: fully functional, hone diameter: 750 mm, table width: 1,200 mm, table length: 1,900 mm, stroke distance: 2,000 mm, The machine is ideal for honing cylinder liners for marine diesel engines, for example. TECHNICAL DATA Table dimensions: 1900 x 1200 mm Spindle height: 3250 mm Stroke distance: 2,000 mm Kelhcov Dgmgecqtjlp Distance from spindle center to column: 700 mm Honing diameter: 750 mm Number of T-slots: 4 Distance between T-slots: 300 mm MACHINE DATA Total length: 4,000 mm Total width: 2,060 mm Total height: 5,500 mm Installation dimensions: 3,650 x 5,800 mm EQUIPMENT Honing tools for the following diameters (approx.): - 820mm (bar length 500mm) - 640mm (bar length 500mm) - 570mm (bar length 500mm) - 520mm (bar length 300mm, 7-bar tool) - 500mm (bar length 400mm, 7-bar tool) - 450mm (bar length 300mm 7-bar tool) - 360mm (bar length 300mm 7-shell tool) - 350mm (bar length 300mm 7-bar tool) - 270mm (bar length 200mm 7-bar tool) - 270mm (bar length 200mm 7-bar tool)

Condition: excellent (used), Complete Grinding Room for bandsaw blades Klslhccqokx E Sdotep

Condition: used, machine/vehicle number: 3254, used honing machine make NAGEL Kslhccokt Nnvoqtslp type VS 8 - 35 max. stroke = 350 mm throat = 250 mm Distance table - spindle = 800 mm Bore diameter = 24 - 150 mm

Condition: used, NANOCOLOR VARIO 3 / NANOCOLORVARIO3, Macherey-Nagel GmbH & Co. KG Thermoblock  Klelhcokn Nihecqtsp Model: NANOCOLOR VARIO 3 Condition: Used

Condition: used, LAS301PV, Umwelt Lufttechnik AG, laser extraction filter Model: LAS 301 PV Type: LAS300 Kslhcjq S Tk Aecqtslp Condition: Used