Schreinerei Zinkenbiber

Condition: used, Airless spraying unit WIWA, type WIWA 10.000 Paint spraying unit Year of manufacture approx. 1980 Flow rate approx. 10 L/min Operating pressure approx. 250 bar Air inlet approx. 6.5 bar - Paint spraying gun WIWA No. 2, type WIWA 500D - Approx. 14.5 m high-pressure hose with paint spraying gun - Compressed air unit with pressure regulator and oiler - Mobile base frame, pump unit with foldable suction pipe Space requirement L x W x H 700 x 700 x 1000 mm Weight 45 kg Good condition Ncsdpfx Akszinzlj Aew

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 07022/01, We offer this used Cefla Finishing SPRAYBOTIC RU MW machine, manufactured in 2007. Machine type: SPRAYBOTIC RU MW Year of manufacture: 2007 Serial number: 07022/01 Supply voltage: 380 V Electrical frequency: 50 Hz Total installed power: 38.5 kW If you have any questions or require further information, please do not hesitate to send us a message or call us. Nodpfozhbd Rox Ak Ajcw

Condition: used, Coating chain composed of chain, rails and drive motor, approximate length 300 m. Used Njdoy Ud S Tspfx Ak Aecw

Condition: used, Binks B8 High-Pressure Paint Spraying Pump Ncedey Ud Smspfx Ak Asw The BINKS B8 pumping unit is produced by BINKS, a company known for spray guns and accessories since 1890. Binks products are used in a wide range of industries worldwide, from automotive to industrial coating solutions. The BINKS B8 pumping unit is versatile and suitable for a wide range of industrial and automotive applications. Price of the new: Price of the new:

Condition: used, Promac brand paint machine, model S.3P.3L, consisting of paint pump, 3 paint guns, 3 UV lamps for drying and transport tape from 6200 x 10 mm, command panel, timers and 'manual/automatic' drives. Nodsy S Ac Eopfx Ak Aecw Promac brand painting machine, model S.3P.3L, consisting of a paint pump, 3 paint guns, 3 UV lamps for drying and a 6200 x 10 mm conveyor belt, control panel, timers and “manual/automatic” drives.

Condition: good (used), Year of construction: 2012, Lothar Starke Airless piston pump HP 4/32 Lothar Starke Airless unit including spray gun Tripod stand Ratio: 32 / 1 Package with filter Compressed air manometer Good condition Nsdjy A Tpqopfx Ak Ascw Location: in stock at 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, Binks Raptor Lite AirCombi Spray Unit The Binks Raptor Lite on tripod combines the NEW Binks MX 4/32 stainless steel pump with the NEW Binks AirCombi spray gun AA4400M. This guarantees pulsation-free paint supply and perfect surface quality. Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Ncjdpfsy A Ni Tex Ak Asw Typical fields of application: - Furniture and wood industry - Aerospace - Off-road - Metal processing - Truck trailer and semi-trailer manufacturing - And many more… Suitable for the following materials: - Wood stains, paints and glazes - Primers, sealants, and undercoats - Solvent-based and water-based paints - Polyurethane - And many others… 32:1 AirCombi Spray Package - Patented magnetic shift for rapid, pulsation-free stroke changeover - All wetted parts made from stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance effort and minimal downtime - Fixed, spring-preloaded packings - Large sight glass for separating agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 – ratio 32:1 - Maximum material flow: 4 l/min - Maximum operating pressure: 256 bar Location: in stock, 54634 Bitburg - Available immediately -

Condition: like new (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, Automatic door painting line comprising: Automatic door destacker, door by door Njdpfsyrr Dksx Ak Ascw Automatic painting robot with spraying Door stacker onto trolleys Door dimensions: lengths from 2000 to 2600 mm widths from 730 to 1030 mm

Condition: used, Year of construction: 1999, No. 6 roller blinds belts, motorized, for drying varnished chairs or similar products (see video) Available dimensions: mt. 4 x 22.5 mt. 4 x 24.5 mt. 4 x 24.5 Njdpfxsyaqy Te Ak Ascw mt. 2.3 x 27.5 mt. 2.3 x 27.5 mt. 2.3 x 27.5

Condition: ready for operation (used), Wagner paint unit Paint and lacquer pump MODEL T.371 Nsdpfjyaqpbsx Ak Ascw

Condition: used, Truck dimensions (pallets): From 1 to 4) 140x110 h.120 Kg. 600 5) 140x130 h.40 Kg. 100 6) 150x100 h.90 Kg. 300 7) 320x100 h.120 Kg. 800 8) 320x90 h.80 Kg. 300 Inventory of parts: No. 69 pieces of 3 meters (total 207 meters) No. 1 piece of 2.80 meters Ncedpjx Tuu Nsfx Ak Asw No. 13 pieces of 3 meters (total 39 meters) No. 6 pieces of 1.80 meters (total 16.8 meters) nr. 2 pieces of 2.40 meters (total 4.8 meters) No. 1 piece of 1.50 meters nr. 2 pieces of 0.70 meters (total 1.4 meters) nr. 2 pieces of 1 meter (total 2 meters) No. 1 piece of 1.50 meters No. 17 curves of 1.20 linear meters (total 20.4 linear meters) with a pitch (diameter) of 1.15 meters No. 6 curves of 0.3 meters (total 1.8 meters) No. 1 trailer with 1.50 meter track

Condition: used, Year of construction: 2016, Used Makor START ONE spray coating machine suitable for low-volume woodworking production. Designed for applying water-based or solvent-based paints and glues to veneered components and PVC panels. Ideal for companies moving from manual finishing to automatic spray coating. Equipped with PLC control system with intuitive interface and automatic panel detection to optimise paint usage. Features a self-cleaning paper transport system, reducing maintenance and downtime. Spraying unit includes an electronically controlled oscillating arm with capacity for up to 4 spray guns, 2 high-pressure feed circuits, and quick-change coupling system. Efficient air-flow and filtration system ensures clean operation and environmental compliance. Technical Data: • Feed speed: 1–4.5 m/min • Air capacity: 10,000 m³/h Nedex Iggyspfx Ak Aocw • Installed power: 7 kW • Working height: approx. 900 mm

Condition: good (used), functionality: fully functional, High-pressure piston-diaphragm pump. Universally suitable for aggressive, abrasive, or shear-sensitive products. Very low rinsing agent consumption. For all applications up to 250 bar and 5 l/min. Supplies up to 8 AirCoat spray guns. Ncjdpexmf Svefx Ak Asw + 3 automatic AirCoat spray guns with internal control for installation in automated painting systems. +FITTINGS+AIR/PRODUCT HOSE

Condition: good (used), Year of construction: 1994, Technical data: - Manufacturer: Heesemann Bdjdmayow Dplws Tmbeh - Type: EA4 - Year of construction: 2002 - Working width: 1,300mm - Working height: 880-920mm - Scooter transport, rubberized rollers - Roll pitch: 65mm - Roll diameter: 60mm - Fine dust filter Arrangement of the dust removal modules seen in the direction of flow: 1) Air blowing channel 1 piece from below 2) Ionization from below 3) Air blowing channel 2 pieces from above (With its own fan, no compressed air required) 4) Ionization bar from below and from above Nedpfjxiy Htsx Ak Ascw Installation dimensions: - Installation length: 830mm - Width: 2.245mm - Height: 1,470mm - Suction nozzle: D 160mm - Height adjustment: motorized - Seperat control panel with hight adjustment included ( see pictures )

Condition: used, Gun cleaning device MARX PWA 900 -used- Housing parts made of stainless steel, timer, fresh spray nozzle ----- Technical data ----- Dimensions (LxWxH): 670 x 510 x 370 mm, Njdpfx Asu R Tfask Aecw Compressed air: 6 bar

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, We are Penope Oy and we provide solutions for industry in Finland but also worldvide. We are official Makor dealer in Finland. Technical specs: Very little used vacuum extuding machine, year 2023. Ncedpfxjtqu Dij Ak Aow IN FEEDER FOR VACUUM mod. TEP 2000 reinforced version The in feeder, which is integral part of the vacuum coater, is equipped with high adherence belt and piece side guides. It is use to properly feed profiles in the vacuum head. TECHNICAL DATA TEP 2000 for vacuum Max. working width mm 220 Working height mm 850±30 Feed speed m/min 25÷150 Feed motor power (with inverter) kW 0,55 VACUUM EXTRUDING MACHINE mod. STORM WB Vacuum extruding machine for applying water base paints, designed in stainless steel plate (inox) and anti-adherence material. The machine is complete with a “cutting down” unit which allows a high reduction of the polluting emissions and a complete recovery of the excessive paint in order to reduce the consumption of paint to the minimum. PAINTING Extruding head realised in anti-adherence material. The head is complete with an adjustable profile guiding system, with paint adduction distributors. All the inner components are easily taken apart for a quick cleaning. A double diaphragm pneumatic pump with high capacity, transfers the paint from the tank to the extruding head, complete with a basket filter in stainless steel (inox) and an anti-pulse device for the interruption and feeding of the product. AUTOMATIC FILLING SYSTEM Automatic filling system for automatic decanting of the product directly from the paint drum to the tank of the machine. The system is also provided with an acoustic alarm in order to signal decrease of paint level inside the tank. Thanks to this system it is possible to maintain in circulation a minimum quantity of the product. CONTROL PANEL General electrical switch-board which is integral part of the aspiration tower equipped with control panel for the start-up and the control of the machine. Two vacuum indicating gauges for the control of vacuum degree and of loss of filter efficiency. TECHNICAL DATA STORM WB Compressed air consumption (~5 bar) nl/min 1500 Working height mm 870 +/-30 Turbines capacity (each) mc/h 470÷600 mbar 200÷250 Turbine motor power x 3 Kw 11 AUTOMATIC PRE-WASHING SYSTEM The automatic PRE-washing system allows a quicker product change or an easier maintenance of the machine. The cycle consists of the following phases: 1) Through a three-way valve the feeding pump sends the remaining product to an external container till the tank is completely empty. 2) Through hydric plant (at customer’s charge) the product tank is filled with water. 3) Turbines are activated while the previous three-way valve goes back to working position so that the feed pump can send in circulation the clean water for a defined time necessary for the washing. 4) The three-way valve goes back to discharge position and the tank is emptied by the washing water. 5) The automatic filling system activates for the new product.

Condition: excellent (used), Year of construction: 2000, WIWA high-pressure pump 235.42R / 38042, year 2000 With high delivery capacity, ideal as a feed pump for airless sprayers (suitable for medium and low viscosity coating materials) Material guide in stainless steel (suitable for water-based paints) Transmission ratio: 42:1 Air inlet pressure max. 8 bar Flow rate per double stroke 235 cm3 Delivery rate max. 38 l/min. Maximum permissible operating pressure 335 bar Piston diameter of the air motor 230 mm Piston stroke of the air motor 120 mm The devices are very little used! Ncodpfxjthcflo Ak Asw Technically and visually in very good condition. ATTENTION: the price of EUR 1.900,- (net) is for 1 device !!!

Condition: as good as new (ex-display), functionality: fully functional, Cobra is an exclusive high pressure double diaphragm pump suitable for Airless and AirCoat applications up to 250 bar. Cobra is the first high pressure pneumatic pump without packing. The lack of contact between the material and the external atmosphere (the pump is completely sealed), the absence of friction in the fluid section and the minimum shear make it perfect for any kind of material including the most critical ones such as reactive paints (UV paints, isocyanates, acrylics) or highly abrasive materials. The pump works with extremely low pulsation and creates a uniform paint flow, achieving a perfect spray pattern and superb surface quality. With its minimized internal volumes, the pump is designed to greatly reduce solvent consumption and material waste during flushing and color-change operations. Ncedpfx Akeqzx Nkj Aew Cobra 40-10 is the ideal solution for working with small quantities and frequent color changes – recommended for single-gun up to three-gun applications in the wood and furniture industry, small carpentry shops and joineries, and the general metal industry. Cobra® 40-10 is also ideal for feeding base or hardener for 2K mixing units (FlexControl and FlexControl Plus). Wagner membranska pumpa OMJER PRITISKA 40 :1 MAKS. TLAK MATERIJALA NA ULAZU PUMPE 20 bara DOVOD MATERIJALA M-M 36x2 IZLAZ MATERIJALA M-G 3/8’’ TEMPERATURA MATERIJALA 10 - 80 °C ULAZNI TLAK ZRAKA 2,5 - 6,0 bara PRIKLJUČAK ZA ULAZ ZRAKA F-G ½’’ RADNI TLAK 250 bara MAKS. BRZO UDARA 200 DS/min VOLUMETRIJSKI PROTOK PO DVOSTRUKOM UDARU 10 cm3/DS TEMPERATURA OKOLINE 10 - 60 °C TEŽINA 19,0 kg MAKS. RAZINA ZVUKA 74 dB(A) MATERIJAL PH 3,5 - 9,0 pH PUMPA JE U KOMPLETU SA CRIJEVOM I PIŠTOLJEM GM4700AC

Condition: ready for operation (used), machine/vehicle number: 89915, Drive = Compressed air, Material/air ratio = 16:1, Maximum material pressure: 90 bar, Air inlet pressure: 1 to 6 bar, Ncedeiv Huwepfx Ak Ajw 4 double strokes per 1 liter of material, with MX-type gun with double hose, unused since the last maintenance in 01/20, Condition as inspected, available from warehouse in Seevetal, subject to prior sale.

Condition: ready for operation (used), machine/vehicle number: 06G1062, Drive = compressed air, Material/air ratio = 17:1, Maximum material pressure = 110 bar, Air inlet pressure = 1 to 7 bar, Njdsiv Ht Iopfx Ak Ascw Output per double stroke = 60 cm³ with MX spray gun with double hose, unused since the last maintenance in 01/20, condition as inspected, available ex warehouse Seevetal, subject to prior sale.

Year of construction: 2006, condition: ready for operation (used), I sell the edge spraying automat with UV-drying and sanding units MAKOR GEMINI 56, Baujahr 2006. 2-Zone Vacuumpainting with self pumps system WITHOUT lost paint 2-Zone UV-drying Nodpfeim Eyxex Ak Aecw 2 pcs. Edge sanding aggregates tiltable. Material is immediately dry and useable ! Very good condition. Available immediately. Possible to test.

Condition: used, pressure 3 - 6,5 kg / cm² bar rate of flow 26 l/min diameter of die - min./max. -- mm Ratio 73 : 1 rated current 1,65 KW weight of the machine ca. 100 kg dimensions of the machine ca. 730 x 760 x 1200 mm Nodpfxjgvklij Ak Ascw noise level 78 dB(A)

Condition: not inspected (used), I sell the Airless high pressure set of painting devices without guns. 2 stk. high pressure pump Kovofiniš vyza 4V ratio 33:1, output pressure 9-25 MPa 1ks. high pressure pump Wagner 600 Airless 2ks. high pressure tank Kovofiniš TZ60M und TZ100M 1ks. Tank Kovofiniš. Nedpfsd Nnb Rex Ak Ascw On stock. Sellable immediately. Total price 1000 Euro.

Condition: used, Year of construction: 1997, rate of flow 34 l/min 28 : 1 7 bar Ncsdsd Ih R Hjpfx Ak Ajw

Condition: new, Year of construction: 2024, Binks Raptor Lite Air Combi Spray System The Binks Raptor Lite on a tripod combines the NEW Binks stainless steel pump MX 4/32 with the NEW Binks AirCombi spray gun AA440C. This guarantees pulsation-free paint supply and perfect surface quality. The Raptor Lite is the affordable and robust complete solution for a wide range of craft and industrial applications. Typical application areas: - Furniture and wood industry - Aerospace - Off-road - Metalworking - Truck trailer and semi-trailer manufacturers - And many others.... Suitable for the following materials: - Wood stains, paints and varnishes - Primers, sealants and undercoats - Solvent-based and water-based paints - Polyurethane - And many others.... 32:1 AirCombi Spray Package - 5-year pump warranty Ncedpjbu Dziefx Ak Aew - Patented magnetic switch for quick, pulsation-free stroke change - All material-carrying parts made of stainless steel - AirCombi spray gun with the latest atomization technology - Modular design for reduced maintenance and low downtime - Fixed, spring-loaded seals - Large sight glass for release agents - Manufactured according to ISO 9001, CE and ATEX certified Raptor Lite Pump Specifications: - MX4/32 - Gear ratio 32:1 - Material flow max. 4 l/min, - Operating pressure max. 256 bar