Used Tos Sn 55 for sale (10,431)

Condition: ready for operation (used), Tos SN 55 B Conventional Lathe with Digital Readout and Safeties Swing diameter over bed: 540 mm Swing diameter over support: 300 mm Tedeylpqhspfx Airod Spindle bore: 75 mm Turning length: 1600 mm Dimensions: 360x150x180 cm (LxWxH) With feed on X and Z axis With steady rests With extra jaws With safety features With removable carriage section With coolant pump With Mitutoyo digital readout 380v Location: Budel, Netherlands Transport: negotiable upon request Call or email for more information. Also check out our other listings. We are looking for industrial machines throughout the year. Do you have machines available? Send us photos and information. The seller is not liable for any typographical or data transmission errors. The machine's appearance, technique, and wear correspond to its age; used machines are sold without warranty. The displayed price is exclusive of VAT (unless otherwise stated).

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Tjdpfx Ajz Tdcfjired

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder Tjdpfx Ajzphf Doired - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: good (used), Diameter over bed: 500 mm Diameter over carriage: 270 mm Diameter of swing over cross slide: 700 mm Distance between centers: 1500 mm Diameter of tailstock spindle housing: 70 mm Travel of tailstock spindle: 180 mm Travel of cross slide: 300 mm Maximum workpiece weight: 300 kg Total power: 6.6 kVA Machine weight: 1760 kg Tsdpfx Aiezf Nd Hsrsd

Condition: ready for operation (used), Heidenhain AE LC 281 ID 721 856-02 read head SN 55 349 541, cable length 3 m, used, in good condition, 100% functional, scope of delivery as shown in the photos. Tedpfx Aijx Dwrcjrsd

Condition: ready for operation (used), Vogel Spandau Pumpen PS 1556-530 submersible pump SN: 312413 – pump length: 55 cm, used, in good condition, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for costs of packing and shipping! Tsdpfjx Dwhwox Airod

Condition: good (used), Year of construction: 2013, Ref. -No.: 10636 Manufacturer: TOS VARNSDORF Type: WHN 13 CNC Year of construction: 2013 Type of control: CNC-Steuerung Control: Heidenhain 530 Storage location: Halberstadt Country of origin: Czech Republic X-Travel: 3500 mm Tsdpfx As Ahkx Isirod Y-Travel: 2000 mm Z-Travel: 1250 mm W-Axis: 800 mm B-Axis: 360 ° Table Load: 15.000 kg Tool Taper: SK 50 Turning Speeds: 1400 RPM Spindle Speed: 2000 RPM Table size: 1800 x 2200 mm Further information: - The control system was converted to a HEIDENHAIN 530i in 2013. - All drives were upgraded to digital. Thrust bearing replacement on the tower also renewed in 2013. - Accessories: - 3D probe - Heidenhain, large spindle support - 1x Heidenhain axis module (completely overhauled), - 1 new axis module is installed in the machine. - Newly packaged spare parts, covers from the machine. - All bearings have been replaced on the machine in recent years. - Tools and milling cutter heads are available. The machine is first-hand. The machine is still powered up and in production. The machine can be viewed by appointment.

Condition: new, Year of construction: 2024, New machine Turning diameter over bed 500 mm Todpfx Aiowu Du Iorjd Turning diameter over slide 270 mm Turning diameter in gap 700 mm Bed width 340 mm Dimensions between centres 1500 mm Height of centres 250 mm Speed ​​rpm 22 – 2000 Mounting main spindle Bayonet 6 Spindle bore 52 mm Including 3-jaw chuck, 4-jaw chuck, rapid toolpost with 4 inserts, rapid feed, collant equioment, 2 axes digital read out, fixed steady, traveling steady, set of change gears and instruction manual

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2969 Make: TOS Type: SN / SIU Tedjzdiuxjpfx Airod Year: 90 Max. Diameter 150 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Metal cutting Tooling TOS - SN / SIU MACH-ID 2968 Make: TOS Type: SN / SIU Tsdpfx Aiszdiv Asrod Max. Diameter 250 Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Heidenhain HR 410 ID 296 469-55 handwheel, serial number 40014004G, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Tjdpfoz Hh Uqsx Aired

Condition: good (used), I sell the multirip saw of czech production TOS Svitavy PKSN32. Cutting height under the blade 120mm / possibility of adjustment Width of cut on the feed belt max. 350mm. Open design / possibility to insert wider workpieces Motor approx. 45 KW. Diameter of main saw blade max. 350mm. Feed speed controlled by variator up to 36 m/min. Total weight approx. 3500kg. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately. Tjdpfemk E D Ijx Aired

Condition: new, Year of construction: 2025, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1000 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 2550 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder Tjdpfx Aiowwt I Njred - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: ready for operation (used), Festo EGSL-BS-55-250-12.7P mini slide 559339 J108 serial number: 08373, used, in good condition, 100% functional, delivery as per photos. Tedpfex Erm Tsx Aired

Condition: ready for operation (used), Year of construction: 1979, functionality: fully functional, center width: 2,000 mm, rotational speed (max.): 450 rpm, workpiece weight (max.): 5,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Swinging diameter over bed: 1,050 mm Distance between centers: 2,000 mm Spindle bore: 105 mm Spindle speed: 2.24–450 rpm Workpiece weight: max. 5,000 kg Tedps Af Hdusfx Airsd MACHINE DETAILS Control: Conventional Motor power: 22 kW Dimensions & Weight Dimensions (L x W x H): 4,900 x 1,900 x 1,700 mm Machine weight: 8,000 kg EQUIPMENT Four-jaw chuck Fixed steady rest

Condition: ready for operation (used), Festo EGSL-BS-55-250-5P / 562229 linear actuator, serial number: 12081, used, in good condition, 100% functional, delivery as per photos. Tjdpfx Aiox Erndjrod

Condition: new, Year of construction: 2026, functionality: fully functional, Swing over bed 710 mm Swing over cross slide 420 mm Tjdoyt Ihnepfx Aired Swing in gap 910 mm Gap length 357 mm Center height 250 mm Center distance 2000 mm Bed width 450 mm Speed ​​10 – 1600 rpm Cutting tool diameter 32 x 32 mm Spindle bore D73.5 mm Drive power 5.5 kW Tailstock sleeve D90 mm Tailstock sleeve travel 180 mm Tailstock taper Morze 5 Weight approx. 3250 kg Dimensions L x W x H = 3500 x 1100 x 1850 mm Accessories, Equipment - 3-axis indicator system - Chuck guard - 3-jaw chuck D250 mm - 4 Chuck diameter 300 mm - Tool holder guard - Long slide stop - Steady rest - Traveling steady rest - Standing center - Reduced adapters for main spindle - Tailstock - Coolant system - 4-way tool post - Machine light - Rapid traverse on longitudinal and cross slides - CE Mark - Machine manuals

Condition: new, Year of construction: 2026, functionality: fully functional, Swing dia over bed 500 mm Swing dia over cross slide 270 mm Swing dia in bridge 700 mm Length of bridge 357 mm Center high 250 mm Center distance 1500 mm Width of bed 340 mm Max weigth of wpc. 300 kgs Tsdpfx Asyt Iaqoired Spindle speed 22 – 2000 rpm Spindle hole D53 mm Spindle power 5,5 kW Weight ca.1950 kgs Dimensions LxWxH = 3200 x 1100 x 1500 mm Accessories and features - 3 axis D.R.O. - Chuck protection - 3 jaws chuck D250 mm - 4 jaws chuck D300 mm - Tool holder protection - Stopper for long. slide - Steady rest - Travelling rest - Center - Reduction adapter for main spindle - Tailstock - Coolant unit - 4-fold toolholder - Machine lamp - Rapid speed on long, and cross slides - CE marking - Manuals

Condition: good (used), Year of construction: 1998, Ref. -No.: 10671 Manufacturer: TOS VARNSDORF Type: WH 105 CNC Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 PB Tedpfxj Ahky Ne Airod Storage location: Halberstadt Country of origin: Czech Republic Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: ready for operation (used), Year of construction: 2011, EXCELLENT CONDITION TOS SVITAVY FWP 225 FOUR-SIDED PLANER AND PROFILING MACHINE FOR SALE Perfect choice for industrial woodworking production and professional window manufacturing! For sale is an exceptionally well-maintained, robustly constructed, Czech-made TOS Svitavy FWP 225 four-sided planer and profiling machine. The machine is an ideal choice for larger-capacity carpentry workshops, lumber processing facilities, and specifically for the serial production of wooden joinery (windows, doors). 📌 KEY FEATURES AND TECHNICAL SPECIFICATIONS: • Year of manufacture: 2011 (Young, modern and precise design) • Total power: 35 kW (High-performance, efficient motors) • Supply voltage: 3~ 400 / 230 V (50 Hz) • Machine weight: 2900 kg (Nearly 3 tons, massive cast iron frame, which guarantees completely vibration-free and highly accurate machining) • Pneumatic requirements: 0.4 – 0.6 MPa (4 – 6 bar) operating air pressure for the clamping devices • Protection rating: IP 54 (Protection against dust and splashing water) • The machine features a robust cast iron frame, excellent vibration damping, and high-performance motors, which guarantee warp-free and perfect surface quality. • Key technical parameters and features: • Maximum working width: 225 mm • Maximum working height: 120–130 mm Tjdpfez Tdhzjx Airod • Spindle diameter: Standard 40 mm (easy tooling) • Feed speed: Continuously adjustable (between 5 – 25 m/min) for optimal material processing. • Removable/replaceable groove bed: Modular table design that allows for the easy removal of the groove bed for quick adjustment between precise guidance of short, uneven pieces and smooth surface planing. Used in a single shift!

Condition: good (used), TOS fnk 25 – milling machine Table dimensions: 1250 × 290 mm, Tedpfxs Ahfd Se Aired 800 mm X-axis travel 370 mm Y-axis travel 450 mm Z-axis travel Automatic feed on the drill quill, 3 settings: 0.035 / 0.070 / 0.140 Automatic feed and rapid traverse on the X and Y axes Electric traverse (rapid traverse) on the Z-axis Spindle ISO 40 with a speed of 56–4500 rpm, Table load capacity up to 200–500 kg, Machine dimensions: 1.90 m (length) × 1.70 m (depth) × approx. 2.3 m (height) Machine weight: approx. 1.7 tons. Year of manufacture: 1986

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, We offer for sale a CNC vertical lathe (carousel) TOS HULÍN SKJ 12 A CNC, equipped with a Siemens SINUMERIK 840Di control system. The machine underwent a complete overhaul and modernization in 2009, including the installation of CNC control and machine geometry adjustment. The carousel is fully functional, in operational condition, and can be demonstrated to interested parties upon prior arrangement. Technical specifications: Parameter | Value Manufacturer | TOS HULÍN Type | SKJ 12 A CNC Manufacturing number | 2212 046 Year of overhaul | 2009 Control system | Siemens SINUMERIK 840Di Diameter of clamping plate | 1,250 mm Maximum workpiece diameter | 1,400 mm Maximum workpiece height | 1,070 mm Maximum workpiece weight | 6,000 kg Cross slide stroke | 710 mm Working stroke of the ram | 720 mm Transverse travel of the tool post from the center of the clamping plate left/right | 60 / 915 mm Machine condition and equipment: * Complete overhaul and modernization in 2009 * CNC control system Siemens SINUMERIK 840Di * Turret tool head Tsdpfx Ajz Tzyusirod * Complete technical documentation in electronic format, including documentation before and after the overhaul * Machine geometry adjustment performed * Fully functional condition with the possibility of demonstration The machine is suitable for machining larger-sized rotary parts, flanges, fittings, and other components in mechanical engineering production. Inspection and demonstration of the machine are possible upon prior arrangement.

Condition: used, Year of construction: 2010, Faceplate LD 650 for TOS WHQ 13 For sale: a used faceplate LD 650, manufactured in 2010, suitable for TOS WHQ 13. Suitable for facing, turning, and machining large diameters. Slide stroke: 170 mm, maximum machining diameter: approx. 1,000 mm. The faceplate is intended for use on a TOS WHQ 13. Tedez I Dvmopfx Airod Technical data: Type: LD 650 Diameter: 650 mm Slide stroke: 170 mm Machining diameter: 300 - 1,000 mm Speed: up to 150 rpm including turning tool holder Price: 9,100.00 Euro net (new price: 21,500.00 €)

Condition: used, TOS W100A - Horizontal Boring and Milling Machine The W100A is one of the most successful models from TOS Varnsdorf and represents the latest version of the classic series (H100, H100A, W100, W100A). It is robustly built, technologically versatile, and easy to operate and maintain. Ideal for single and small batch production with high reliability and comparatively low costs. - Classic design with a fixed column - Extendable spindle - Cross-traveling, rotatable work table - Integrated faceplate support in the spindle head - Option to use long drill rods with support from the drill support Tsdpfxe Ahg Dtj Airjd - Hardened and ground guide rails - Central lubrication - Position indicator The machine is suitable for drilling, milling, facing, and threading, as well as general machining operations on large workpieces. Technical data Spindle head: - Spindle diameter: 100 mm - Spindle connection: ISO 50 - Spindle travel (Z): 900 mm - Spindle center height above the table (Y): 0 - 1120 mm - Distance between faceplate and support bearing: 2800 mm - Faceplate diameter: 600 mm - Centering hole diameter in the table plate: 280 H6 mm - Centering hole depth: 8 mm - Max. facing diameter: 900 mm T-slots: - Faceplate, number/size/pitch: 2 / 20 H12 / 335 mm - Slide, number/size/pitch: 2 / 16 H12 / 150 mm Table: - Table cross travel (X): 1600 mm - Table longitudinal travel (W): 1250 mm - Clamping area: 1250 × 1250 mm - T-slots, number/size/pitch: 9 / 22 mm / 160/80 mm - Centering hole diameter in the table: 180 H6 mm - Centering hole depth in the table: 6 mm - Max. workpiece weight: 3000 kg - Tailstock slide travel: 1000 mm Speed: - Number of spindle speed steps: 23 - Spindle speed range: 7.1 – 1120 rpm - Number of faceplate speed steps: 16 - Faceplate speed range: 7.1 - 224 rpm - Max. torque of the spindle at speed: 3350 / 7.1 - 78.5 / 1120 Nm/rpm Feeds: - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 18 - 900 mm/min - Drilling feeds, number/range: 32 / 0.02 - 12 mm/rev - Drilling feeds, number/range: 18 / 25 - 1400 mm/min Rapid traverses: - Spindle, spindle head, table & tool slide: 2800 mm/min - Table rotation: 1 rpm - Tailstock bearing: 696 mm/min Threads: - Metric threads, number/range: 18 / 0.25 – 12 mm - Inch threads, number/range: 18 / 120 - 2.5 threads/1" Electrical data: - Main motor power: 11 kW - Total power consumption: 15 kW - Operating voltage: 3x 400 V / 50 Hz Dimensions & weights: - Machine dimensions WxHxD: approx. 6020 × 3000 x 3500 mm - Machine weight: approx. 14000 kg

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 560 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 250 mm, stroke length: 250 mm, throat depth: 365 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS X-axis travel: 560 mm Y-axis travel: 450 mm Z-axis travel: 250 mm Stroke: max. 250 mm Todpfo Af Hdbex Airjd Overhang: max. 365 mm Table diameter: 500 mm Table length: 500 mm Table width: 500 mm Table depth: 500 mm MACHINE DETAILS Control system: Conventional Model: Vertical Number of axes: 3 Power: 5.5 kW Dimensions & Weight Dimensions (L x W x H): 2,000 x 1,600 x 2,350 mm Net weight: 3,000 kg Number of transport packages: 1