Parkes Machine Tools Ltd

Condition: used, Functionality: unexamined, Large contingent of used BRUDERER BSTA 25 / BSTA 25H punching presses Car8Qjmxla as well as various spare parts, control cabinets, BBVs, etc.

Condition: used, Functionality: fully functional, BRUDERER Automatic Punching Press BSTA 25UL Very good condition! Technical specifications: ----- Tonnage 250 kN Tool opening 750 mm Stroke rate 100-1425 (depending on the selected stroke) Adjustable stroke 13, 16, 19, 25, 32, 38 Slide adjustment range 51 mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 640 x 530 mm Slide area 530 x 360 mm Strip passage width 210 mm Base plate opening 590 x 180 mm Strip inlet height 50-120 mm Strip travel direction: left to right Cajnug0H9O Feed BBV190/85

Condition: excellent (used), Year of construction: 2010, Schuler SERVO transfer press MSD2-630 Operating hours 28146 Stroke rate 3-60 1/min Slide adjustment 300 mm Stroke 80-400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm Schuler Transfer System Schuler conveyor system Belt width 80-1,300 mm Drgqqj Material thickness 0.5-3.0 mm

Condition: excellent (used), Year of construction: 2017, Schuler SERVO transfer press MSD2-800 Operating hours 14097 Stroke rate 3-60 1/min Ram adjustment 300 mm Stroke 80-360 / 400 mm ram area 4,000 x 1,700 mm Table surface 4,000 x 1,800 mm B930Lz0Zie Schuler Transfer System Schuler feed Coil line Coiltech Strip width 120-1,300 mm Material thickness 0.6-5.0 mm Reel load capacity 10,000 kg

Condition: excellent (used), Year of construction: 2007, Helmerding press Type: 315 KDH / 2100 / 2-m Pressing force: 3,150 kN Lifting height: 40-200 mm Strokes per minute 25-100 1/min Ram adjustment 150 mm Installation height 550 mm Ram area 2,000 x 1,100 mm Table surface 2,000 x 1,200 mm Fold-through hole in press table 1,750 x 350 mm Drf8Pd Motor power 75 kW Weight of the press 49,000 kg Year of construction 2007 DREHER roller feed Type: WAV-MD-22 Belt width max. 510 mm Belt thickness max. 4.0 mm Year of construction 2003 DREHER straightening machine Type 1676 D-FQ strip width 20-500 mm strip thickness 0.8-5.0 mm Year of construction 2003 DREHER decoiler with hydr. auxiliary drive Type 2381 D-MO-FPS Load capacity 4,500 kg belt width 520 mm

Condition: excellent (used), Year of construction: 1985, MECFOND blanking line Pressing force 5.000 kN Stroke 300 mm ram adjustment 250 mm Stroke rate 15-60. rpm B8Hcg7Lnw8 Installation height 790-1035 Table surface 3,500 x 2,500 mm Belt conveyor Belt width 600-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: excellent (used), Year of construction: 1993, Müller Weingarten blanking line Pressing force 5,000 kN Stroke rate 15-60. rpm Stroke 255 mm Drf8Oz Stroke adjustment 140 mm Installation height 930 mm Table surface 4,000 x 2,500 mm Plunger area 4,000 x 2,500 mm Belt conveyor Belt width 500-2000 mm Belt thickness 0.5-2.0 mm Reel load capacity 30,000 kg

Condition: used, Double column eccentric press, WEINGARTEN punching machine type HD 250 Manufacturer no. 126 127, built in 1974 Ideal for overhaul and rebuilding with new electrics, mechanically in good condition Pressure force 250 tons. Stroke adjustment 10-100 mm Weight approx. 25 tons. Table size 1280 x 1120 mm Distance between the columns 1480 mm Side column clearance 680 mm Stroke adjustment approx. 10-100 mm Ram adjustment 120 mm Installation height with largest stroke at bottom approx. 780 mm Stroke rate 30 to 100 strokes/min. (infinitely variable) Motor power 11.5-42 kW Power supply 380 volts, 50 Hz - very precise ram guide through 8-way flat guide - 2-connecting rod design - hydraulic overload protection - pneumatic clutch-brake combination ORTLINGHAUS - electro-motor ram adjustment - manual stroke adjustment - infinitely variable stroke rate via adjustable drive motor Elektra Faurndau Drfgyl - adjacent electrical control cabinet (outdated, not functional) - machine for installation above ground Space requirement with platform L x W x H 4000 x 2700 x 5100 mm Space requirement without platform L x W x H 3000 x 1900 x 5100 mm Height of press stand with drive motor approx. 4900 mm Transport dimensions, press stand lying Length: 510 Width: 2000 x Height: 3000 mm Total weight approx. 25 tons. Mechanically in good condition, electrical system outdated and not working From stock 37235 Hessisch Lichtenau

Condition: excellent (used), Year of construction: 2003, Schuler Press TME2-1250-5-1000 Year of manufacture 2003 Stroke rate 10-35 Ram stroke 600 mm Ram adjustment 300 mm Tool installation height 800-1,100 mm Joiner over floor 600 mm Table surface 5,100 x 2,200 mm Ram area 5,100 x 2,200 mm Transfer unit Transfer feed 0 - 1,000 mm Gripper rail distance 600 - 2,340 mm Transfer stroke 200 mm B0Xwbnwy2A Belt conveyor Belt width 200 - 1,300 mm Belt thickness 0.6 - 3.0 mm Max. Coil weight 25,000 kg

Condition: excellent (used), Year of construction: 2001, Kaiser punching machine Type: KSTU 4000-25-6P Pressing force: 4,000 kN Table surface: 2,500 x 1,250 mm Pedal surface: 2,500 x 1,100 mm Installation height: 700 mm Pedal stroke: 40-250 mm Pedal adjustment: 200 mm Stroke rate: 20-100 1/min SIEMENS S7 control Space required: 4.8 x 3.2 x 5.5 m (LxWxH) Weight: 78,000 kg ARKU strip system B0Xvdubgkw Strip width 120 - 800 mm Strip thickness up to 6.0 mm ARKU decoiler Load capacity 8,000 kg

Condition: new, Year of construction: 2017, Functionality: fully functional, machine/vehicle number: SCV-40-G8-6-KW3, total width: 406 mm, overall weight: 4,000 kg, control voltage: 400 V, sheet thickness steel (max.): 6 mm, Completely new machine, never put into operation due to failed work. Motorized unwinding unit with loading carriage. Electric feeder (AE400). Drive (motor) + control from SIEMENS. The measuring roller is located in the front of the machine, which monitors the correct feed with an accuracy of +/- 0.1 mm. The unit complies with CE standards. Coil weight: 4,000 kg Coil width: 406 mm Coil outer-inner diameter: Ø1400 mm - Ø508 mm. Drdisb Material thickness: 0.6mm - 6mm Voltage: 400 V - aux 24V

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Bul0Efb278 Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: used, Year of construction: 1999, connected load frequency 220 V Dq7Ma7 rated current 263/152 01516 81 663 694 weight of the machine ca. 1 t

Condition: used, Year of construction: 1985, pressure 25 t no. of strokes 1500 Hub/min Dq3Rcx total power requirement 20 kW

Condition: used, Year of construction: 1987, pressure 40 t no. of strokes 500 Hub/min Bce2Xuj7Ks total power requirement 5,5 kW

Condition: used, Year of construction: 1980, pressure 25 t Dq3Rcn no. of strokes 1500 Hub/min total power requirement 20 kW

Condition: used, Year of construction: 1997, pressure 130 t distance between columns 1600 mm Bblaxfqivc stroke 8 - 140 mm no. of strokes 50 - 200 Hub/min dayligth (stroke and adjustment up) 520 mm column travel -side 610 mm table surface area 1600 x 880 mm hole in the table 1000 x 350 mm table height over floor 950 mm ram surface 1600 x 880 mm power requirement 24,2 kW weight of the machine ca. 28,00 t required space 4,3 x 2,2 x 3,8 m ram adjustment 100 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting 2025 - in progress: new electrical (safety) control - Siemens S7-1500 F, easy operation via touch-panel Video at seller's site before dismantling available

Condition: used, Year of construction: 1990, pressure 32 t distance between columns 680 / 550 mm stroke 8 - 50 mm no. of strokes 85 - 500 Hub/min dayligth (stroke and adjustment up) 300 mm column travel -side 250 mm table surface area 620 x 450 mm hole in the table 450 x 110 mm table height over floor 915 mm ram surface 560 x 350 mm power requirement 7,5 kW weight of the machine ca. 5,60 t required space 3,6 x 1,65 x 2,8 m Dq3Im7 ram adjustment 50 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, pneumatic counterbalance in ram, pincer feed (ZR 18 D) can be offered without or with putting into operation in given condition

Condition: used, Year of construction: 1994, pressure 250 t distance between columns 1650 / 1400 mm stroke fix 150 mm no. of strokes 30 - 75 Hub/min dayligth (stroke and adjustment up) 665 mm column travel -side 550 mm table surface area 1600 x 900 mm hole in the table 1000 x 300 mm table height over floor 980 mm ram surface 1400 x 900 mm power requirement 42,0 kW weight of the machine ca. 33,00 t required space 2,8 x 2,5 x 4,4 m permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, FIX stroke, motoric ram adjustment, motoric centralized lubrication Werkzeugwechselsystem elektronischem Walzenvorschub (Normatic, AESL 500-2,8) electronic roll feed (Normatic, AESL 500-2,8) with motor (Indramat), motorised adjustable material guide, motorised height adjustment tool changing system distance table - ram without tool changing system approx. 765 mm Bbkziyduss can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1996, pressure 130 t distance between columns 1220/1070 mm stroke 22 - 96 mm Bbkwplc7Bu no. of strokes 20 - 120 Hub/min dayligth (stroke and adjustment up) 518 mm column travel -side 600 mm table surface area 1220 x 880 mm hole in the table 450 x 250 mm table height over floor 950 mm ram surface 1180 x 800 mm power requirement 22,0 kW weight of the machine ca. 17,50 t required space 3,7 x 1,75 x 3,55 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, hydraulic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment, electronic roll feed (Hensel, EVX 500) with hydraulic intermittent lifting

Condition: used, Year of construction: 1976, pressure 200 t distance between columns 1550 mm stroke 30 - 160 mm no. of strokes 30 - 90 Hub/min dayligth (stroke and adjustment up) 745 mm column travel -side 800 mm table surface area 1500 x 1150 mm hole in the table 450 mm table height over floor 810 mm ram surface 1500 x 1000 mm power requirement 38,0 kW weight of the machine ca. 26,5 t required space 5,1 x 1,6 x 3,7 m ram adjustment 110 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Bbkutxxyba

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t Dq3Ii2 dimensions of the machine ca. 2,7 x 1,7 x 3,6 m permitted for automatic mode according to the CE-Norm with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK A noise enclosure can be offered optionally - price on request

Condition: used, Year of construction: 1998, pressure 160 t stroke 30 - 90 mm no. of strokes 50 - 300 /min distance between columns 1270 mm dayligth (stroke and adjustment up) 590 mm column travel -side 440 mm table surface area 1250 x 900 mm hole in the table 950 x 300 mm ram surface 1250 x 800 mm ram adjustment 100 mm material width 200 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 64,5 kW Dq3Iht Weight 21,00 t dimensions of the machine ca. 3,0 x 2,2 x 3,9 mxmxm permitted for automatic mode according to the CE-Norm with infinitely variable drive, hydraulic clutch/brake combination (make Desch), automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1978, pressure 150 t stroke fix 80 mm no. of strokes 30 - 150 /min distance between columns 930 mm dayligth (stroke and adjustment up) 400 mm column travel -side 650 mm Bbkp8Xl2Po table surface area 880x1300 / 1500x600 mm hole in the table 760 x 180 mm table height over floor 1270 mm ram surface 920x1000 / 1300x600 mm Weight 27,5 t dimensions of the machine ca. 3,1 x 1,8 x 4,3 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination, fix stroke, motoric ram adjustment, pneumatic counterbalance in ram, centralized lubrication, WITHOUT feeder as is where is, WITHOUT putting into operation Price for commissioning (with new electric control) on request

Condition: used, Year of construction: 1988, pressure 200 t stroke 30 - 160 mm Dq3Ifx no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment