ZVV GmbH

Condition: good (used), Used TIG welder Messer Griesheim Unitig GW 450 Thyristor AC-DC, German top brand, up to 450 A 60 % ED - 350 A at 100 % ED, water cooling, proven thyristor transformer technology, easy operation, best welding properties before gassing aftergas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, 2-stage-4-stage, 2 currents controllable, balance controller, ammeter, change in aluminum penetration + points, rectangular sine in the range AC Super Alu, weight: 420 kg, TIG welder Messer Griesheim Unitig GW 450 Thyristor is a thyristor unit Nelhcsk Sag Ajdwvjwd

Condition: used, Load capacity: 900kg Hook height: 2800mm, Nolhcdekuaivswvewd width: 4000mm, with trolley,

Condition: good (used), Description Nelhceiux T Uodwvewd Coil weight 100 kg Coil inner - diameter Ø 300-540 mm Manual spreading

Year of construction: 1995, Condition: good (used), DS1220 is virtually maintenance-free. All Workhorse Series vacuums are Class II, Division 2 compliant to NFPA 652 and 654 standards. Housing GRP extremely strong, corrosion-proof Modular system, can be upgraded at any time Complete system, including soundproofing Suitable for round-the-clock operation Nwsljim I Svjhcdwvsd Extra-large filter Patented foot bar emptying mechanism Motor power (kw) 2,2 Voltage (Volt) 400 Sound pressure level (db(A)) 70 Vacuum (mbar) 206 Air flow rate (m3/h) 270 ( 50) Height (mm) 970 Width (mm) 520 Length (mm) 850 Weight (kg) 58

Condition: good (used), The AG 330 from Grote & Hartmann meets all requirements for crimping cable lugs on wires. Nolhcdohtrrqswvswd

Year of construction: 1987, Condition: good (used), Temperature chamber Temperature range: -70°C to +180°C Temperature change heating: 5.3 K / min Speed after cooling: 4.7 K / min Temperature deviation temporally in the middle of useful space: Nslhcdshtrq Tjwvowd ±0.2K to ±0.5K Temperature homogeneity spatially related to setpoint: ±0.5K to ±1.5K Heat compensation: at +20°C approx. 350 W Power (kW): 1.5 / A 7.5 Sound pressure level: Approx. 55 dB (A) Electric: Nominal voltage: 1 / N / PE AC230 V +/- 10% 50Hz Nominal output: Approx. 0.9 kW Nominal current: Approx. 6.0 A

Year of construction: 1989, Condition: good (used), Data; - Working table travel 160x200mm - cutting thickness - max. 80 mm - workpiece weight - max. 40 kg - wire diameter from 0,08 to 0,15 mm - power supply - three-phase 380/220 V Njlhcdwogrnytevewd - power consumption 0,6 kW - machine weight - 650 kg

Year of construction: 1991, Condition: good (used), Description: - X x Y x Z axis travel: 200 x 300 [mm]. - table size: 250 x 350 [mm] Nwelhcdwogktifjved - max. weight of the workpiece: 100 [kg] - max. diameter of electrode: ~ 0,3 ~ 3,0 [mm] - floor space: 860 x 830 x 1990 [mm - weight: 500 [kg]

Year of construction: 1987, Condition: good (used), X - distance: 710 mm Y - travel: 600 mm Z - distance : 445 mm CNC control DIALOG 4 spindle speeds: 18 - 6300 rpm table size: 550x1000 mm Table load: 600 kg Feed rate - speed manually adjustable: 10 - 3150 mm/min programmable : 2 - 6000 mm/min rapid traverse - speed: 6000mm/min Drive power:7.5/9.5 kW Switch-operated tool clamp, hydraulic - SK 40 quill stroke: 80 mm Nwslhcef Nf Ansdwvjd Coolant system Operating voltage: 380 V Total power consumption : 20 kVA Machine weight : approx. 4,8 t Space requirement approx.: 2.15 x 3.80 x 2.40 m electrical cabinet: 1,60 x 0,70 x 1,25 m

Condition: good (used), Measurements granite slab: 800 x 750 x 120 mm Screen: .300 mm Njlhcdwjd N Ex Esvewd Protractor: 360°, Nonius 2 min Power Rear Light Dark Field: 2x 100W Power Lamp Translucent: 1x 100W Power Light Light Field: 1x 100W Lenses: 5x + 10x + 20x Maximum achievable accuracy: 0.0015 mm (correct setting & calibration required) Dimensions LxWxH: 0.8 X 1.2 x 1.7 m Weight: about 800 Kg

Year of construction: 1994, Condition: excellent (used), Description:-table diameter 1400 mm -Table load of Max 3000 kg Nslhod Iw U Uecdwvowd -Belt width of 150 mm -Speed max. 25m / min -Belt thickness max. 1.2 mm Very compact and easy-to-use palette Unwinder diameter of turntable 1400 mm of more robust machine body with high capacity speed control of cam universally suitable for Multicoil

Year of construction: 1981, Condition: good (used), machine/vehicle number: 2608-0129, Travel for the x-axis - 400 mm Travel for the y-axis 250 mm Travel for the z -axis 340 mm Table Surface area - 600 x 300 mm Turning speed range 40 - 3150 rpm Planetary grinding heads included. With full technical documentation There is no possible drilling and milling - no tooling Transport dimensions: 1.5 x 1.7 x 1.8 m, Nwslhced Dz Rhsdwvjd Weight ; 1300 kg.

Condition: good (used), Laboratory Tube Furnace Naber R70/9 - Housing made of high quality structural steel. - The diameter of the tube is 70mm - The length of the tube is 1000mm - Tube made of sillimantine, works with two end caps 60 - damaged on one side. Nolhcdwjdy Huysvowd - Silent electronic relay - Maximum temperature - 1200C - Temperature drop - 10 C / min - Programmable temperature curve

Condition: good (used), Analog with electrical scanner. - Including several options. Length surface: approx. 990 mm Max height optics glass table (removable) approx. 200 mm (Only the device without the table) dimensions: L / B / H 110 x 115 x 80cm Nwjlhsdy Eynecdwvsd Weight: approx. 400 kg

Year of construction: 1985, Condition: good (used), Beckslide travel; 240 mm Quill travel; 100 mm Table dimensione; 350x230 mm Longitudinal travel (x); 200mm Transverse travel (y); 120 mm Nwolhcody Dw Esdwvjd Table load maximum; 100 kg Work tank dimensions; 520x350 mm Dielectric reservcircapacity; 68 l Hydraulic tank capacity; 5,6 l Dielectric pump flow 140l/min Weigt of generator P25 -125 kg Power requirements; Machine 1kVA Generator 2,2kVA Hydraulique pump pressure; 20 bars Weight with storage tank; 460 kg

Year of construction: 1988, Condition: good (used), AGIE AGIECUT 100 type AC100/87 serie 122 Machine tool AGIECUT 100 Generator - AGIEPLUS-MM Machine control - AGIEMATIC -C Dielectric aggregate – DA-15/AF Working table; length 560 mm , width 445 mm Max. dimensions of work piece; length 810 mm, width 580 mm, height 250 mm Table load max; 200 kg Height of work support over ground; 800 mm Longitudinal traverse (X-axis); 300 mm Cross traverse (Y-axis); 200 mm Rapid traverse; 30 mm/min Diameter of electrode wire; from 0.03 mm up to 0.30 mm Total power required; 15,7 kVA Weight total installation approx.; 2700 kg Overall dimensions machine; Length 1700 mm Nwslhcdsdy Dvxewvsd Width 1550 mm Height 2130 mm

Year of construction: 1988, Condition: good (used), hydraulic clamp vertical adapters for parting line molding capability clamp tonnage 40 ton Platen size 346 x 346 mm Distance between tie bars: 220 x 220 mm Maximum open daylight: 475 mm Mold opening stroke: 275 mm Minimum mold height: 200 mm Hydraulic ejector force: 2 ton Hydraulic ejector stroke: 100 mm Screw diameter: 22 mm Shot size: 30 gram Optional screw-shot sizes: up to 30 mm Screw stroke: 95 mm Njlhcobqi Tbedwvjwd Screw volume: 36 cm³ Maximum injection pressure: 91 kN (18,200 psi) Screw speed range: 10-580 rpm (infinitely variable) Hydraulic oil required: 190 liters (50 gallons) Dry cycles: 2520 per hour Pump Motor: 11kW (15HP) Overall length x width: 3.3 x 1.1m Height w/inj unit vertical: 2.8 m Weight without oil: 1700 kgs

Year of construction: 1972, Condition: good (used), I will sell a Japanese press for automatic pressing of small shapes made of dry matter, powder, granules. Pressure up to 0.5 tons Nelhcdwsbqi Stjvowd It can work in single stroke or continuous stroke mode Requires compressed air to work

Condition: good (used), ALPA RT300 Grinding machine Wheel dimension mm.140 Nwelhsbqdizocdwved Magnetic chuck dimensions mm.260x140 Axis X mm.300 Axis Y mm.160 Axis Z mm.200

Year of construction: 1987, Condition: good (used), machine/vehicle number: 544/87, Table: 300-1000 mm Nelhcjbqcaxsdwvjwd Made in Switzerland Hydraulik BP Energol HL68 Mobil DTE Heavy Medium Schmierung BP Maccurat 68 Mobil Vactra Oil Nr.2 Schleifspindel BP Energol HLP-D16 Mobil Velocite Nr.3