CNC-WAHAB Werkzeugmaschinen Handel & Service

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 Ncedpfx Ajydflljdwol 1 piece workpiece pick-up-gripper for turret

Condition: excellent (used), Year of construction: 2020, This CMZ TTL-52-52-T1Y-T2Y is a twin-spindle/twin-turret CNC turning and machining center with extensive Y-axis functionality, designed for medium-sized turned workpieces up to Ø 220 mm and with significant travel in X, Y, and Z. It supports simultaneous machining with multiple tools and features a robust construction for high-production environments. This machine is in excellent condition and has ca 8200 actual spindle hours. Cnc control Fanuc Series 31i-Model B Maximum turning capacity Ø 220 mm (turntable) Max. Permissible swing diameter Ø 240 mm Turning length (between centers) 800 mm X1/X2 axis travel 167.5 mm X3 axis travel (sub-spindle) +120/–120 mm Z1/Z2 axis travel 515 mm Z3 axis sub-spindle travel 580 mm Maximum spindle speed (main/sub) 4,500 rpm Spindle bearing outer diameter 150 mm Spindle bearing inner diameter 100 mm Spindle nose (main and sub-spindle): ASA 6” (A2) X-as 30 m/min Z-as 30 m/min Y-as 20 m/min Including: Coolant through right spindle Tailstock in right spindle (Short Version) Removable tool presetter Side exit chip conveyor Irco Breuning SIMAG 50.1-R-3000 bar feeder (Y2012) AR Filtrazioni mist collector Large set (ca 50) HAINBUCH chucks Full options list in the attached document. Viewing possible upon appointment. Availability: 03/2026 Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. Nsdpfsydd Tzex Adwocl

Condition: used, Year of construction: 2011, turning diameter over cross slide: 75 mm, turning diameter: 381 mm, spindle speed (max.): 3,500 rpm, spindle bore: 75 mm, travel distance Z-axis: 850 mm, total height: 2,325 mm, total length: 4,820 mm, total width: 2,100 mm, overall weight: 8,000 kg, CNC Lathe with Y-axis, driven tools and 2nd Spindle Ncjdpfx Asydd H Ijdwjl CNC Control Fanuc series 18i-TB Turning diameter 381 mm Spindle bore diameter 75 mm Spindle speed 3500 R/min Spindle motor 22/15 Kw Movement X-axis 190 + 69,5 mm Movement Y-axis +55 / -55 mm Movement Z-axis 850 mm Movement W-axis (subspindle to mainspindle) 830 mm Min indexing C-axis main spindle 0,001 ° Number of tools on turret 12x Number of driven tools 12 x Tool Taper VDI 40 Bar feeder Irco-Breuning ILS MUK Spindle motor driven tools 4000 R/min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2022, This machine will be sold by Euro Auctions at an unreserved auction in Dormagen, Germany 4th – 6th February 2026. For more information go online. Nedpfeydc Dxex Adwecl

Condition: good (used), Year of construction: 2010, Mazak Integrex 200 - IV, year of manufacture 2010 / overhauled in 2020 for €75,000, Mazak control, turning length 1500 mm, sub-spindle, lower turret with 9 stations, stepless B axis in milling head, 2 x C axis, Y axis, 40-position tool magazine, high-pressure coolant 70 bar, SMW steady rest SR 3.1 clamping range 25 - 165 mm, prepared for probe, measuring probe RMP 60 Q, SMW chuck KNCS NB 260 - 78 with 2 sets of base jaws, machine overhauled by Mazak in 2020 for €75,000, post processor. Ncjdpfx Adoyc Uk Iowol

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning length: 555 mm, Nakamura-Tome WT-250 Year of manufacture: 2001 Control: Fanuc 18 IT INCLUDED: LOADING SYSTEM (bar feeder for a maximum bar length of 6m) and UNLOADING SYSTEM (for a maximum bar length of 2m) NEW CHIP CONVEYOR (10/2021) LIFTER OVERHAUL (09/2020) Machine Equipment ▪ Bar feeder – max. bar length 6m Max. load length 6200 mm 8 channels with channel diameters Ø 22 mm, Ø 27 mm, Ø 32 mm, Ø 37 mm, Ø 42 mm, Ø 47 mm, Ø 57 mm, Ø 67 mm Includes 8 pusher rods with pusher rod cones Intermediate sizes can also be loaded ▪ Unloading magazine – max. bar length 2m ▪ Coolant tank ▪ Chip conveyor – new as of 10/2021 ▪ Last loader overhaul in 09/2020 – channel replacement, replacement of various bearings, replacement of pusher rods and spindle liner tubes, including maintenance Technical Details ▪ Main spindle power: 18.5 kW / 15 kW Nodpfx Adsyc Uknowocl ▪ Sub spindle power: 11 kW / 7.5 kW ▪ Main spindle torque: approx. 200 Nm Data sheet: 10-13 kgfm = 100 Nm – 125 Nm ▪ Sub spindle torque: approx. 100 Nm, data sheet: 7.3-10 kgfm = 100 Nm -125 Nm ▪ Spindle speed: 59-4500 rpm ▪ Bar capacity (main spindle): 65 mm ▪ Bar capacity (sub spindle): 51 mm ▪ Axis configuration: X both turrets, Y upper turret only, Z both turrets, C both spindles ▪ Travel X1 / X2: 195 mm Y: ± 41 mm Z: 600 mm ▪ Spindle nose (main spindle): A 2-6 ▪ Spindle nose (sub spindle): A 2-5 ▪ Max. workpiece diameter: 250 mm ▪ Max. turning length: 555 mm ▪ Number of tool stations: upper turret 12, lower turret 12 All stations can be equipped with driven tools ▪ Feed power X1 / X2 and Y: 1 kW ▪ Feed power Z1 / Z2: 2.1 kW ▪ Machine dimensions (LxW): 4.5m x 2.6m ▪ Magazine dimensions (LxW): 7.0m x 1.5m ▪ Unloader dimensions (LxW): 6.0m x 1.5m

Condition: excellent (used), Year of construction: 2006, EMCO HYPERTURN 665 with bar feeder. Year of manufacture: 2006. Ncjdpfxsyc Sa Ho Adwsl

Condition: used, Year of construction: 2008, functionality: fully functional, turning diameter: 200 mm, spindle motor power: 11 W, spindle speed (max.): 5,000 rpm, spindle bore: 50 mm, travel distance Z-axis: 450 mm, type of input current: three-phase, chuck outer diameter: 210 mm, bar diameter (max.): 50 mm, We offer this used DMG Gildemeister CTX 310 eco CNC turning and milling center, year 2008. Ncedpfxjyc Nrgs Adwsl The lathe is in perfect working condition, and various sets of chucks and driven tools are included in the price. All original paper manuals are available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: good (used), Year of construction: 1994, TRAUB TNS 65 D / 5-axis CNC turning-milling center - TX8 D control - Complete technical data see photos - Year of manufacture 1994 - Hydrobar bar feeder - Various driven tool holders - Tool holders - Three-jaw chuck - Complete documentation Subject to errors and omissions. Ncjdjyc Nnzepfx Adwsl

Condition: used, Year of construction: 2005, CNC Control: MSX 850 X Axis mm: 260 Z Axis mm: 795 Y Axis mm: +/- 50 Maximum Turning Diameter mm: 366 C-Axis Increment: 0.001° Maximum Turning Length mm: - Cutting Feed Rate mm/min X, Z, Y: - Swing Over Bed mm: Ø Swing Over Cross Slide mm: Ø Bar Capacity mm: Ø 80 (main) / Ø 51 (sub) Rapid Traverse Rate max. m/min X, Z: - Main Spindle 12" Spindle Speed rpm: 4,000 Spindle Power kW: 18.5 Torque Nm: - Spindle Bore mm: - Main Spindle Nose: A2-8 Sub-Spindle 10" Spindle Speed rpm: 6,000 Spindle Power kW: 11 Torque Nm: - Spindle Bore: - Sub-Spindle Nose: A2-5 Turret Positions: 12 Number of Driven Tool Stations: 12 Driven Tool Speed rpm: 6,000 Driven Tool Power kW: 5.5 EQUIPMENT Chip conveyor 3-color status lamp MACHINE DIMENSIONS Njdeyc Ngqjpfx Adwocl Length mm: 4,414 Width mm: 2,370 Height mm: 2,115 Weight kg: 6,200

Condition: used, Year of construction: 2002, LATHE MORI SEIKI CL 2000 BM Nodpfxsyc Hmhj Adwecl WITH DRIVEN TOOLS SUPPLIED WITH 7 DRIVEN TOOL POSITIONS MAX. TURNING DIAMETER: 260 mm MAX. TURNING LENGTH: 320 mm TRAVELS: X: 245 mm Z: 350 mm SPINDLE SPEED: 3,500 RPM TOOL MAGAZINE: 10 POSITIONS NO TAILSTOCK COMPLETE WITH ALL MANUALS YEAR: 2002

Condition: excellent (used), Year of construction: 2008, Technical Specifications: 5 axes: X, Z, Y, C, and B axes Turning diameter: 2350 mm Turning length: 1800 mm 2 pallet positions Travel distances (X/Y/Z): 3055 / 1850 / 1800 mm CNC control: MAZAK MAZATROL MatFix Chuck speed: max. 205 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Further technical details upon request Nodoycyn Eepfx Adwjcl Machine weight: approx. 65 t Equipment: Band filter 2 pcs. chip conveyors Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets 2 pcs. lifting magnets The seller is not liable for typographical or data transmission errors. The machine’s appearance, technical condition and wear are appropriate for its age; second-hand machines are sold without any warranty.

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, 66 mm spindle bore, two turrets, two Y-axes, sub spindle, parts catcher, short bar loader, high-pressure pumps, tool holders. Njdpfx Ajycwwwedwecl

Condition: used, Year of construction: 2011, operating hours: 4,598 h, functionality: fully functional, machine/vehicle number: 3087698, turning length: 806 mm, turning diameter over cross slide: 584 mm, turning diameter: 457 mm, spindle motor power: 22,000 W, spindle speed (max.): 6,000 rpm, travel distance X-axis: 318 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 584 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 4,500 rpm, type of input current: three-phase, We offer this used Haas DS-30Y CNC turning and milling center, year of manufacture 2011. Njdpfx Adoycwbpjwecl Voltage: 360-480 V Phase: 3 Frequency: 50/60 Hz Full load current: 40 A Maximum current: 70 A Short-circuit interrupting capacity: 10,000 A Symmetrical short-circuit current: 5,000 A If you have any questions or need more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 1999, operating hours: 65,090 h, functionality: fully functional, ET365 GS with bar feeder and chip conveyor The machine is fully equipped - Collection tray - High-pressure pump - Control cabinet air-conditioning unit - Kupa loader - The machine was purchased from a running production operation and has been technically inspected - Geometry measured and all settings adjusted Nsdoycvaqjpfx Adwjcl - Wearing parts replaced - All functions checked and adjusted as required The machine is fully operational and ready for immediate production The machine is available immediately

Condition: excellent (used), Year of construction: 2009, Description The machine was used exclusively for plastics! Excellent condition TECHNICAL DETAILS X-axis travel: 260 mm Y-axis travel: 100 mm (+/- 50 mm) Z-axis travel: 590 mm C-axis movement: 0.001 Max. main spindle speed: 6,000 rpm Maximum turning diameter: 356 mm Some axial and radial milling holders Tool turret: 16-position all driven Bar capacity: 65 mm Axis: 4 MACHINE DETAILS Control: MSX-850 III CONTROL Dimensions & Weight Dimensions (L x W x H): 2,705 mm x 2,000 mm x 2,120 mm Weight: 5,800 kg EQUIPMENT Parts catcher Driven tools Ncjdpfx Ajycu Ruedwjl Tailstock Tool setting probe Dust extraction

Condition: used, Year of construction: 2019, Control: MITSUBISHI M730UM with CELOS Main spindle with integrated motor spindle ISM 80: 15/18.5 kW Speed range: 10–4000 rpm 10" hollow chuck 254mm KITAGAWA BB210A821 Counter spindle with integrated motor spindle ISM 65 Speed range: 10–5000 rpm 10" hollow chuck 254mm KITAGAWA BB208A621 20-position BMT star turret KNOLL high-pressure coolant system 70 bar Ncedsycukhopfx Adwol Y-axis with 100mm travel Gantry loading system LG-10AI

Condition: used, Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Nedeycuikjpfx Adwocl Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: excellent (used), Year of construction: 2003, Technical data: 5 axes: X; Z; Y; C, and B axis Turning diameter: 1250 mm Turning length: 1450 mm 2 pallet stations Travel paths (X/Y/Z): 1875 / 1550 / 1345 mm CNC control: MAZAK MAZATROL 640 M Pro Chuck speed: max. 500 rpm Milling spindle speed: max. 10,000 rpm Tool changer: 80 positions Tool holder: SK 50 Further technical details on request Nodpfxeyctgnj Adwecl Machine weight: approx. 55 t Accessories: Belt filter Chip conveyor Spindle cooling unit Oil cooler Infrared probe Various tools Tool cabinets The seller accepts no liability for typographical or data transmission errors. The machine's appearance, technical condition, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2007, operating hours: 24,993 h, functionality: fully functional, I am offering the following machines for sale: TRUMARK 3010 (TMS 1000) – Laser marking – 2011 US-Bad X-tra pro 300 US (MF2) Flex2 – Ultrasonic cleaning system – 2015 Mollart Drillsprint – Gun drilling / Deep hole drilling machine – 1996 Traub TNL 26 – CNC Swiss-type automatic lathe – 2004 Traub TNL 26 – CNC Swiss-type automatic lathe – 2007 Traub TNL 26 – CNC Swiss-type automatic lathe – 2009 Traub TNL 18 – CNC Swiss-type automatic lathe – 2013 Traub TNL 18 – CNC Swiss-type automatic lathe – 2014 Star SV-20R – CNC Swiss-type automatic lathe – 2019 Traub TNL18-9P – CNC Swiss-type automatic lathe – 2015 Traub TNL18 – CNC Swiss-type automatic lathe – 2014 Traub TNL18-9 – CNC Swiss-type automatic lathe – 2013 OTEK CF 1x18 T – Vibratory finishing system – 2011 Rösler FKS 04.1 E Sa-So – Vibratory finishing system – 2020 Schleifbock DP07 – Grinding & polishing (implants) – 1986 Rösler RWT 1000-I Rotary Table Blasting Machine – Blasting cabinet – 2012 Bending Machine C 202 M – Bending machine – 1990 Schmidt Hydro-pneumatic Press – Hydro-pneumatic press – 2021 TRAUB TNL 26 – CNC Swiss/short part automatic lathe General Model: TNL 26 Nedpoycl Uwjfx Adwecl Year of manufacture: 2007 Control: TRAUB TX8i Condition: used, operational Operating hours (under power): 33,905 h Kinematics & Configuration Number of axes: 13 Number of spindles: 2 Number of turrets: 2 Front attachment: yes Counter-operation: yes Main spindle Max. bar diameter: 26 mm Max. machining length: 225 mm Z travel: 250 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Sub spindle Max. bar diameter: 26 mm Z travel: 250 mm X travel: 370 mm Max. speed: 8,000 rpm Spindle power: 11 kW C-axis resolution: 0.001° Tooling systems Upper turret Stations: 12 Live tooling positions: 12 Travel: X: 50 mm Z: 100 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Lower turret Stations: 12 Live tooling positions: yes Travel: X/Z: 50 mm Y: ±20 mm Driven tools: Speed: 6,000 rpm Power: 4.3 kW Front attachment Stations: 5 Live tooling positions: 4 Travel X/Z: 370 / 250 mm Driven tools: up to 6,000 rpm Counter-operation Stations: 5 Live tooling positions: 4 Travel: X: 73 mm Y: ±50 mm Driven tools: up to 6,000 rpm Cooling & Peripheral Equipment Coolant tank: included High-pressure coolant system: 70 bar Chip conveyor: included Workpiece conveyor: included Part removal and ejector: included Driven guide bushing: yes Bar feeder: included Electrical Data Supply voltage: 400 V Total connected load: 33 kW Dimensions & Weight Footprint: 3,706 × 1,292 mm Machine height: 1,630 mm Machine weight: approx. 4,000 kg

Condition: good (used), Year of construction: 2011, functionality: fully functional, Available immediately and can be viewed under power. Upper X Y Z ballscrews fully refurbished mid 2023 by UK company. Included as shown in pictures -- Capto C4 milling -- Capto C4 turning holders -- Capto C4 extensions -- 3 x Dual Capto C4 for turret -- Various other turret holders as pictured -- See attached spreadsheet for included holders -- Renishaw arm -- Part catcher arm + converyor (not used for a long time) -- Old version of CAMplete TurnMill with USB dongle Ncedpfxeycl Epj Adwsl TECHNICAL DETAILS - Number of axes : 9 - Number of spindles : 2 MAIN SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 4500 [rpm] - Max. bar diameter : 65 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Spindle nose : A2-5 - Spindle power : 11 [kW] - Spindle speeds : 5000 [rpm] - Max. bar diameter : 51 [mm] - Max. turning diameter : 200 [mm] - C axis indexing precision : 0,001 [°] - Travel : 780 [mm] - Spindle / counter-spindle distance : 980 [mm] TURNING-MILLING SPINDLE - X/Z stroke : 570/1297 [mm] - Y stroke : +/- 100 [mm] - B Axis stroke : 190 (+/-95) [°] - Tool type : Capto C4 - Spindle speeds : 12000 [rpm] - Spindle power : 7,5 [kW]

Condition: excellent (used), functionality: fully functional, cutting diameter: 560 mm, DOOSAN PUMA 400 LMB FANUC 21i CONTROL MAX TURNING DIA 560 MM MAX WORKING LENGTH 2000 MM Nsdpfx Aeyciq Aodwecl MAX SWING OVER BED 770 MM SWING OVER SADLE 590 MM X Z AND C AXIS - 360 DEGREES 0.001 DEGREES HYD CHUCK 380 MM DIA HYD STEADY ( SMW BLOCK ) SPINDLE BORE 132 MM 12 STATION TURRET SWARF CONVEYOR QUILL DIA 120 MM MORSE TAPER 6 QUILL TRAVEL 120 MM POWER REQUIREMENTS 60 KVA FLOOR SPACE 4220 X 2180 MM WEIGHT 10 TON

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: 01224, turning length: 750 mm, turning diameter over cross slide: 520 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 3,500 rpm, spindle bore: 65 mm, chuck outer diameter: 250 mm, We are offering this used OKUMA HOWA ACT 4 CNC turning and milling centre, year of manufacture 1985. Manufacturer: OKUMA HOWA Model: ACT 4 Year of manufacture: 1985 Condition: used Category ID: 1128 Type ID: 2239 Machine type: CNC turning and milling centre CNC control: Fanuc 10 TF Turning diameter: 380 mm Swing over bed: 520 mm Turning length: 750 mm 12-position turret Spindle speeds: 20 - 3500 rpm Ncedpfsycg Tzjx Adwjl Chuck incl. hard and soft jaws Tailstock Incl. various tool holders New monitor: flat screen Machine under power. Data sheet, documentation and manuals available Data transfer possible via laptop

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 220 mm, travel distance Y-axis: 55 mm, travel distance Z-axis: 670 mm, total height: 3,000 mm, overall weight: 8,000 kg, controller manufacturer: HURCO, controller model: CNC, product length (max.): 5,500 mm, number of axes: 4, This 4-axis Hurco TMX 10 MYSI was manufactured in 2018, featuring a robust HURCO CNC control system. It offers a turning diameter up to 560 mm and a turning length of 600 mm. The machine includes a 12-station tool turret and a spindle bore of 81 mm. Ideal for complex mill-turn operations, consider the opportunity to buy this Hurco TMX 10 MYSI mill-turn centre. Contact us for more information about this machine. • Turning capacity: • Turning diameter: 375 mm / max. 560 mm • Turning length: 600 mm Nsdsyccmdopfx Adwocl • Spindle bore (bar capacity): 81 mm • Axis travels: • W-axis (spindle longitudinal travel): 740 mm • Tool system: • Turret: 12-station tool turret • Tool interface: 12 × VDI 40 • Power & utilities: Total connected load 70 kW

Condition: ready for operation (used), Year of construction: 1989, functionality: unexamined, machine/vehicle number: 80801, turning length: 1,000 mm, spindle speed (min.): 1,000 rpm, spindle speed (max.): 1,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, Equipment: rotational speed infinitely variable, CNC turning and milling center by Mazak, model 40N-ATC N/C (ST40ATC), year 1989. Mazatrol T-3E control, 4 axes, 30-position tool changer, driven tools, chip conveyor. Njdpfxjyccl He Adwscl