Müller ServiceTechnik

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 160 S1M - Pressing force: 1600 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Draw cushion selectable: 630 kN, stroke: 200 mm - Drive: 17 kW - Dimensions: 3500 x 2000 x 1200 mm - new control system, new switch cabinet, light curtain (1-stroke, 2-stroke, safety), new hydraulics, - new seals, paint finish as requested - new UVV safety inspection Nodpfx Adoycl Hgewscl

Condition: refurbished (used), Single-column hydraulic press (completely overhauled) PYE 250 S1M with drawing cushion - Pressing force: 2500 kN - Installation height: 800 mm - Stroke: 500 mm - Speed: downwards 200 mm/s - Drawing cushion: 1000 kN, stroke: 200 mm - Drive: 20.5 kW Ncjdpsycl Evsfx Adwel - Dimensions: 3500 x 2000 x 1200 mm - new control system, new control cabinet, light curtain (single stroke, double stroke, safety), new hydraulics, - new seals - new UVV safety inspection

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Floor clearance: 800 mm Downward speed: 200 mm/sec Njdpfxsya D E Nj Adwjcl Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Nodpfx Aoya D A Usdwecl Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, functionality: fully functional, pressing force: 250 t, Maximum pressing force 250 tons. Working pressure 20 MPa. Upper table 700 x 450 mm. Lower table 900 x 630 mm. Clearance height 800 mm. Cylinder stroke 500 mm. Lowering speed 110 mm/sec. Lifting speed 200 mm/sec. Required power 20.5 kW. Weight 8,000 kg. Nodpfxex N Irae Adwscl

Condition: refurbished (used), Year of construction: 1995, functionality: not functional, machine/vehicle number: H95-2601, total height: 2,400 mm, table height: 830 mm, installation height: 750 mm, total width: 1,100 mm, total length: 1,200 mm, throat depth: 260 mm, pressing force: 16 t, table width: 700 mm, table length: 460 mm, operating speed: 180 mm/s, overall weight: 2,700 kg, reverse speed: 450 mm/s, type of input current: three-phase, stroke length: 370 mm, oil tank capacity: 500 l, input voltage: 400 V, pressing speed: 40 mm/s, Equipment: documentation/manual, safety light barrier, The press is currently undergoing a complete overhaul. Cylinder seals have been replaced and the hydraulic pump has been checked for functionality. It is equipped with a hydraulic safety block that complies with the latest safety regulations. A completely new electrical system and PLC control, including a front safety light curtain, ensure that the press will be in almost as-new condition. Nodpfx Aoxyxyyjdwjcl

Condition: good (used), Year of construction: 1981, machine/vehicle number: 022-009-36, Offer 24374 Technical Data: Nodpfx Aoxuhzcjdwecl - Max. pressing force: 100 t - Max. ram stroke approx.: 500 mm - Stroke speed: 25 mm/sec - Return speed: 125 mm/min - Installation height approx.: 1000 mm - Throat depth (to ram center): 380 mm - Ram clamping surface: 530 x 400 mm - Ram clamping pin: 40 mm - Table size: 750 x 560 mm - Table bore / through-hole: 200 mm - Table height above floor: 720 mm - Oil capacity approx.: 200 ltr - Drive: 400 V / 11 kW - Space requirements approx.: W 1150 x H 3250 x D 1850 mm - Weight approx.: 4600 kg

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. Nsdpfjxna Uzox Adwocl hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: new, Year of construction: 2024, operating hours: 818 h, functionality: fully functional, pressing force: 350 t, stroke length: 890 mm, warranty duration: 12 months, 📋 Technical Specifications (English) Capacity: 350 Tons at 250 bar (including auxiliary cylinders) Main Cylinder: Ø395 mm, Rod Ø300 mm, Stroke: 890 mm Ncodpfx Aexf Dzgjdwsl Auxiliary Cylinders: Ø80 x 100 mm, Rod Ø50 mm, Stroke: 890 mm Cushion Cylinders: Ø180 x 230 mm, Rod Ø115 mm (4 units) Motor: 18.5 kW – 25 HP, 1500 rpm, IE3, 380 V Pump: 71 cc, 105 L/min, variable displacement, pressure-compensated piston type (Taiwan, imported) Valve Block: NG-16, 24 DC, P-Q proportional control Equipped with precise proportional control for all movements: pump protection valve, decompression relief valve, ram–cushion line, pressure transmitter, auxiliary throat protection valve, cushion-seal protection valve, free fall valve. Electrical Panel: Siemens Screen: GMT 7” (domestic, 1-year warranty) Pre-Fill Valve: NG 160 (Taiwan model) Speeds: Down fast speed: 175 mm/s (P-Q proportional adjustable) Up fast speed: 285 mm/s (P-Q proportional adjustable) Pressing speed: 5 – 14.5 mm/s (P-Q proportional adjustable) Dimensions: Table 1200 x 1000 mm, Daylight 1000 mm Linear Scale: Yes Light Curtain: Yes Machine Weight: 15,000 kg ± Oil Tank: 1300 x 900 x 600 mm, 700 L capacity

Condition: used, Hydraulic press LBM B10 Njdpoxbt E Hjfx Adwocl

Condition: used, functionality: fully functional, Hydraulic Press VEB Zeulenroda PYE10N Nodpfx Adjw S Uccewscl Used condition as shown in the pictures All data can be found in the photo of the nameplate.

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm Ncjdpfx Adjw Smukewjl total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1992, HYDRAP type HPSKZ 63t / 20t Pressure: 63t Down table dimensions: 700x700 mm Up table dimensions: 600x600 mm Ncodpfx Adjw R Aamowel Stroke length: 600 mm Daylight: 800 mm Cushion: 20t

Condition: new, Year of construction: 2025, functionality: fully functional, installation height: 400 mm, throat depth: 230 mm, pressing force: 40 t, table width: 700 mm, table length: 450 mm, stroke length: 250 mm, NEW EXNER C-frame press EEX SLL 40 Standard Line LIGHT Year of manufacture: 2025 Pressing force: 400 kN Installation height: 400/450 mm Ncjdew Nx Nhepfx Adwjl Stroke: 250 mm Table (width): 700 mm Table (depth): 450 mm Throat depth: 230 mm

Condition: ready for operation (used), C-frame Press, Hydraulic Press, PYE Press 3t, Used Machine Manufacturer: VEB Wema Type: PYTE 3.15 Overall dimensions: 500 x 730 x 1170 mm Ncodpfx Adjw Hc H Howsl Pressing force: 3.15 tons Stroke: 280 mm Table size: 280 x 280 mm Electrical data: 380 V; 1.5 kW; 4 A

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm Ncsdpfx Adjw D Awmowel height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Njdpfx Aewyplcjdwecl Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 068-071/270, throat depth: 150 mm, table width: 280 mm, table length: 280 mm, distance table to ram: 355 mm, stroke length: 280 mm, No minimum price – guaranteed sale to the highest bidder! Placing a bid requires timely collection between 28.07.2025 and 31.07.2025. TECHNICAL DETAILS Rated force: 3.15 Mp Operating pressure: 125 kp/cm² Upward speed: 100 mm/s Downward speed: 300 mm/s Ram stroke: 280 mm Throat: 150 mm Maximum distance between table and ram: 355 mm Table dimensions: 280 mm x 280 mm MACHINE DETAILS Dimensions: 750 mm x 630 mm x 1,700 mm Weight: 750 kg Connected load: 1.5 kW Rated current: 3.8 A Operating voltage: 380 V / 50 Hz Ncedpfx Adjwvh R Aewsl

Condition: good (used), Manufacturer: WMW Zeulenroda Type: PYE 160 SS Year of manufacture: 1980 C-frame construction Die height 850 mm Thickness bolster plate 100 mm Throat C side 360 mm Specifications Metric US Standard Capacity 160,000 Table length 1,250 mm Table width 600 mm Ram stroke Ncsdpfxswp Nv Hs Adwsl 500 mm Starting speed 100 mm/min Working speed 10 mm/min Return speed 125 mm/min Power 22.5 kW Dimensions (Estimate) Length: 2,150 mm Width: 1,250 mm Height: 3,600 mm Weight: 7,500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not represent a warranty or contract terms. We recommend you check all important details.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, total height: 2,020 mm, total width: 960 mm, total length: 1,350 mm, pressing force: 50 t, table width: 450 mm, table length: 450 mm, operating speed: 30 mm/s, reverse speed: 42 mm/s, pressing speed: 6 mm/s, This press has been specially designed for bending, embossing, forming, punching, assembly, and deep drawing operations. Force options are available in variants from 50 to 150 tons. Model: CD-50/NC Force: 50 T Motor power: 4 kW Ram stroke: 250 mm Working speed: 6.3 mm/sec Approach speed: 30 mm/sec Return speed: 42 mm/sec Maximum pressure: 320 Piston stroke: 250 Lower table: 450×450 mm Ram with anti-rotation device Open height: 400 mm Weight: 1,480 kg CYLINDER AND HYDRAULICS: The double-acting cylinder is equipped with a guide bush, a hard-chromed piston rod, and wear-free guide elements. To prevent wear on the piston rod, the presses are fitted with a removable and replaceable pressure plate. Tools can be mounted in place of the pressure plate. An anti-rotation device is fitted to the cylinder by means of a clamp and guide rod. The hydraulic unit features two speeds and is equipped with automatic high-speed shutoff. A decompression valve for the cylinder is also included in the delivery. ELECTRICS AND SAFETY: A SIEMENS SIMATIC S7 1200 safety PLC and an MTP-400 4-inch touchscreen (positioned above the electric foot pedal) are integrated as standard. These allow programming of the operation mode (semi-automatic or automatic), force, stroke, and dwell time of the upper cylinder. The system offers storage for up to 99 programs, with each allowing configuration of all previous parameters. The control cabinet includes a switch for selecting the desired operation mode (manual or automatic) and a key switch for maintenance work. The electrical and hydraulic controls are designed to be redundant and self-monitoring. The hydraulic safety block is equipped with electrically monitored valves for the required safety. Operation is via a Category IV safety two-hand control button. For maximum safety, fixed side guards with a front opening of 650 mm are installed. Ncsdswlgciepfx Adwsl A hydraulic cushion or hydraulic ejector can be optionally installed. The machines are supplied complete with operating instructions. The presses in the CD series meet all essential safety requirements and criteria in accordance with CE regulations.

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 2,910 mm, total width: 900 mm, total length: 650 mm, pressing force: 150 t, table width: 900 mm, table length: 650 mm, operating speed: 220 mm/s, overall weight: 6,000 kg, reverse speed: 220 mm/s, ram plate width: 750 mm, ram plate length: 500 mm, working height: 950 mm, stroke length: 400 mm, pressure: 290 bar, pressing speed: 8 mm/s, Equipment: documentation/manual, safety light barrier, TECHNICAL DATA: Force: 150 t Motor power: 11 kW Cylinder stroke: 400 mm Variable working speed: 8 - 0 mm/sec Approach speed: 220 mm/sec Return speed: 220 mm/sec Working pressure: 290 bar Table size: 900 x 650 mm Ram size: 750 x 500 mm Open height: 650 mm Working height: 950 mm Width: 1,360 mm Depth: 2,135 mm Height: 2,910 mm Weight: 6,000 kg We have developed motorized screw pumps of the CR/SERVO series with low energy consumption and energy savings of up to 60%. These were specifically designed for tasks that require high production output in the fields of stamping, drawing, and punching. The latest generation CR-SERVO presses have been advanced for versatile applications, including the option to integrate these units into automatic production lines. Ncsdpswkvktefx Adwsl FRAME STRUCTURE: The steel frames of this series are made from a fully welded structure manufactured exclusively from S355JR grade steel. They are stabilized and machined after welding to ensure perfect parallelism and precision. The design and calculations are performed using finite element software to guarantee our high standards of precision and quality. They feature upper and lower table/ram platens made of C45E steel, fitted with T-slots according to DIN 650. The upper plate ensures perfect parallel alignment via two side guides with a 50 mm diameter and maintenance-free bearings. HYDRAULICS: Single-acting main cylinder with a guide bush, chrome-plated piston and maintenance-free wear-resistant guides. For fast approach and rapid return, two side-mounted double-acting cylinders have been installed, enabling quick movement with chrome plating and guidance. REXROTH hydraulic unit with servo motor and prefill valves, including prefill valve for approach and return, and pump with constant output and constant speed operated via the servo motor system, check valve, pressure relief valve, spindle shutoff valve and air cooling. ELECTRICS: Standard equipment includes a SIEMENS PLC model SIMATIC S7 1200 and a 7” touchscreen panel model MPT-700. This allows for programming of force, stroke, and speed, with capacity for storing up to 300 programs. The electrical and hydraulic valves are redundant and automatically controlled. An additional safety block and autodiagnostic devices for valve and safety monitoring are included. Inspection and certification of correct function and safety distances for light curtains is performed. Operation is via a low-voltage electric foot pedal. To ensure operator safety, there are type 4 PLe electrical safety interlocks in the front working area, two hinged side safety guards with safety valves, and internal LED lighting. Complies with all essential safety and health requirements according to CE standard.

Condition: excellent (used), Year of construction: 1983, functionality: fully functional, total height: 2,350 mm, total width: 1,000 mm, total length: 1,300 mm, pressing force: 10 t, table width: 500 mm, table length: 400 mm, operating speed: 100 mm/s, overall weight: 1,300 kg, reverse speed: 450 mm/s, ram plate width: 360 mm, ram plate length: 280 mm, clearance between the columns: 630 mm, stroke length: 400 mm, Equipment: documentation/manual, Hydraulic press PYE 10 S/1M. Year of manufacture: 1983. Manufacturer: VEB Wema Zeulenroda (Germany). Specifications: Maximum pressing force: 10 tons. Nsdjwb Dhnopfx Adwocl Operating pressure: 16 MPa. Upper table: 360 x 280 mm. Lower table: 500 x 400 mm. Clearance: 630 mm. Ram stroke: 400 mm. Downward speed: 100 mm/sec. Upward speed: 450 mm/sec. Power requirement: 5.2 kW. Weight: 1300 kg. Height: 2350 mm, Length: 1300 mm, Width: 1000 mm. Machine in very good technical condition. Machine after complete overhaul.

Condition: good (used), Year of construction: 1995, For sale Hydraulic press PYE-63S Nodpfx Ajv Uxttjdwocl The price given in the advertisement is a net price to which VAT should be added

Condition: good (used), Year of construction: 1998, Press Force 315.00 t Stroke 500 mm Throat 425 mm Installation Height (Upward Stroke) 1,000 mm Table Surface 1,200 x 815 mm Nedpfxev Rwu Ue Adwecl Table Height above Floor 800 mm Ram Surface 1,100 x 700 mm Speed Down 48 mm/s Speed Up 330 mm/s Working Speed 19 mm/s Oil Volume 1,600 l Power Requirement 82.0 kW Weight 23.00 t Dimensions (WxDxH) 2.4 x 2.8 x 4.0 m For Permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation permitted for manual loading according to the CE standard with oil-hydraulic drive, controllable depending on pressure/time and travel, light-guard at the front (Sick), two-hand operation

Condition: good (used), Year of construction: 2014, volume flow: 1,570 m³/h, Vacuum pump Becker Variair RV 2.1944/10 Relative pressure: +410 mbar Volume flow: 1570 m3/h Weight: 60 kg + 21 kg inverter Nodpfxjv Anv Te Adwjcl