Hennig Systems GmbH

Condition: ready for operation (used), Year of construction: 2023, travel distance X-axis: 1,524 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 7,500 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-5/50XT was manufactured in 2023. It features an impressive X-axis travel of 1524 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a robust table size of 1575 x 584 mm and a maximum table load of 1814 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-5/50XT vertical machining centre we have for sale. Contact us for further details. • Working Hours: 0 (Showroom machine) • Spindle Nose to Table (max): 32.9 in / 836 mm • Spindle Nose to Table (min): 7.9 in / 201 mm • Spindle Max Torque: 340.0 ft-lbf @ 700 rpm / 460.0 Nm @ 700 rpm • Spindle Drive System: 2-Speed Gearbox • Table Length: 62.0 in / 1575 mm • Table Width: 23.0 in / 584 mm • T-Slot Width: 0.626 in to 0.630 in / 15.90 mm to 16.00 mm • T-Slot Center Distance: 3.15 in / 80 mm • Number of Std T-Slots: 7 • Max Weight on Table (evenly distributed): 4000 lb / 1814 kg • Max Cutting Feedrate: 500 ipm / 12.7 m/min • Rapid Traverse (X, Y, Z): 710 ipm / 18.0 m/min Djdpfxsz Nlyqe Ai Socn • Max Thrust X: 3400 lbf / 15124 N • Max Thrust Y: 4100 lbf / 18238 N • Max Thrust Z: 5600 lbf / 24910 N • Tool Changer Type: SMTC (Side-Mount Tool Changer) • Tool Capacity: 30+1 • Max Tool Diameter (full): 4.0 in / 102 mm • Max Tool Diameter, Large (adjacent empty): 7.0 in / 178 mm • Max Tool Length (from gage line): 16.00 in / 406 mm • Tool-to-Tool Time (avg): 4.20 s • Chip-to-Chip Time (avg): 6.30 s • Coolant Capacity: 95 gal / 360 L • Air Required: 4 scfm @ 100 psi / 113.0 L/min @ 6.9 bar • Inline Air Hose: 3/8 in • Coupler (Air): 3/8 in • Air Pressure Min: 80 psi / 5.5 bar • Input AC Voltage (3 Phase) - Low: 220 VAC (70 A Full Load) • Input AC Voltage (3 Phase) - High: 440 VAC (35 A Full Load) • Domestic Shipping Pallet Dimensions: 168.0 in x 102.0 in x 125.0 in / 427 cm x 260 cm x 318 cm • Export Crate Dimensions: 168.0 in x 102.0 in x 130.0 in / 427 cm x 260 cm x 331 cm • Shipping Weight: 16250 lb / 7371.0 kg Additional equipment • Machine vise mounted on T-slot table • Air gun attachment • Spray container and cleaning brush holder mounted on control arm console Technical Specification Taper Size BT 50

Condition: ready for operation (used), Year of construction: 2024, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 2,570 mm, total width: 2,340 mm, overall weight: 5,316 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 22,400 W, product length (max.): 3,330 mm, number of axes: 3, This 3-axis HAAS VF-4 was manufactured in 2024. It features impressive travels of 1270 mm in the X-axis, 508 mm in the Y-axis, and 635 mm in the Z-axis. The machine includes a robust table size of 1321 x 457 mm and a maximum table load of 1588 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4 vertical machining centre we have for sale. Contact us for further details. • Feed Force: X: 11343 N; Y: 11343 N; Z: 18683 N • Rapid Traverse: 25.4 m/min • Outer length: 1321 mm • Outer width: 457 mm • Tslots size: 15.90 mm to 16.00 mm • Number of tslots: 5 • Max distance between vertical spindle and table: 742 mm • Table load: 1588 kg • Number of tool slots: 30+1 • Max tool length: 330 mm • Main electronic connection: 220 VAC / 440 VAC, 3 Phase • Air pressure: 5.5 bar • Air supply: 113.0 L/min @ 6.9 bar Dcjdpfx Aoz Nldcoi Sjn • Showroom Machine • Spindle nose to table (~ min): 107 mm • Max torque: 122.0 Nm @ 2000 rpm • Max torque with optional gearbox: 339 Nm @ 450 rpm • Bearing lubrication: Air / Oil Injection • Cooling: Liquid Cooled • T-Slot center distance: 80 mm • Max cutting feedrate: 16.5 m/min • Tool changer type: Side-Mount Tool Changer (SMTC) • Max tool diameter (full): 64 mm • Max tool weight: 5.4 kg • Tool-to-tool (avg): 2.80 s • Chip-to-chip (avg): 3.60 s • Coolant capacity: 208 L • Inline air hose: 3/8 in • Coupler (Air): 3/8 in • Input AC voltage (3 Phase) low: 220 VAC (Full Load Amps: 70 A) • Input AC voltage (3 Phase) high: 440 VAC (Full Load Amps: 35 A)

Condition: like new (used), Year of construction: 2019, operating hours: 2,557 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 25 m/min, controller manufacturer: HAAS, controller model: CNC Control, total height: 3,096 mm, total length: 3,832 mm, total width: 3,402 mm, table width: 473 mm, table length: 1,321 mm, table load: 1,500 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, operating hours of spindle: 2,557 h, spindle nose: BT40, number of spindles: 1, number of slots in tool magazine: 20, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, The machine is in excellent condition and has only 2557 spindle hours, and it is very well-equipped! This HAAS VF-4 is equipped with: - Chip conveyor - Renishaw OTS tool probe - Renishaw (HAAS 40-2) 3D probe - Programmable coolant nozzle - Mechanical preparation for a 4th axis - Approx. 25 tool holders incl. tools - Machine vise - Coolant gun - 3 Renishaw probe styli - Coolant tank - Original documentation. Dedpfez Nfirox Ai Sscn

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 1,500 mm, travel distance Y-axis: 670 mm, travel distance Z-axis: 625 mm, controller manufacturer: FANUC, controller model: I Series, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis DOOSAN DNM 6700L was manufactured in 2021. It features an impressive X-axis travel of 1,500 mm, Y-axis travel of 670 mm, and Z-axis travel of 625 mm. The machine is equipped with a 30-position tool magazine and a spindle speed of 12,000 rpm. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 6700L vertical machining centre we have for sale. Contact us for further details. • Display: 15" • Program memory: 2 MB / up to 1,000 programs • Rapid traverse: X/Y 36 m/min, Z 30 m/min • Spindle torque: 118 Nm • Through-spindle coolant: 12 bar • Automatic doors • Robot interface • Tool breakage detection in tool magazine • Ball screw nut cooling • Ethernet connection • Air clamp interface on table • Seat air check • Coolant level sensor • Mist collector interface • Coolant gun • Condition: Used, excellent condition, fully functional and regularly maintained • Quantity: 4 units available Additional equipment • Chip conveyor LNS MH500 (right side) • Belt-type oil skimmer Dcodpfjz I S E Nsx Ai Son • Vacuum pump Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2020, operating hours: 900 h, functionality: fully functional, NCT304 control (Windows-based, touch screen, USB, 19-inch LCD monitor) Table size: 1750 x 700 mm Max. table load: 1200 kg "T" slots in the table: 18 x 5 x 125 mm Distance between the spindle nose and table surface 135 - 835 mm X travel: 1600 mm Y travel: 700 mm Z travel: 700 mm Taper: SK40 Tool magazine: 16-station, arm type Max. spindle speed: 10000 rpm Drive power: 20 kW Power supply: 22 kVA Dimensions (L x W x H): 4370 x 2915 x 3027 mm Weight: 10000 kgs Accessories, equipment: - Coolant system - CTS (Coolant Through Spindle), 20 bar - Machine feet - Central lubrication system - Signal light Dcjdpfez I Sdxex Ai Son - Spindle cooler - Machine documentation The machine is barely used and is in absolutely mint condition.

Condition: ready for operation (used), Year of construction: 2004, operating hours: 19,357 h, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, controller model: Siemens Sinumerik 810D, spindle speed (max.): 9,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,600 mm Travel in Y-axis: 400 mm Travel in Z-axis: 400 mm A-axis: 360° × 0.001° A-axis speed: 20 rpm Spindle speed: 0–9,000 rpm Speed control: stepless Tool interface: DIN 69871 SK40 Working feed rate: 5–28,000 mm/min Rapid traverse rate X/Y/Z-axis: 28,000 mm/min Table design: Bridge table with 4 sides Table length: 1,800 mm Table width: 113 mm Table load capacity: approx. 150 kg Magazine design: Chain magazine Magazine capacity: 44 Max. tool diameter: approx. 70 mm Max. tool diameter with free adjacent positions: approx. 200 mm Max. tool length: approx. 240 mm Max. tool weight: 5 kg Max. total weight of tool magazine: approx. 200 kg Tool change time: approx. 8 s MACHINE DETAILS Control system: Siemens Sinumerik 810D Total power consumption: 14 kW Dimensions & Weight Dimensions (L x W): approx. 6,500 x 3,500 mm Machine weight: approx. 9,000 kg Operating hours: 19,357 h EQUIPMENT Second milling spindle Djdpfez Izdhjx Ai Secn Exchangeable milling spindle Coolant system (coolant tank: approx. 480 l) Internal cooling External cooling Clefil RBF-E100 unit (coolant pressure: 20 bar) Clamping system Hydraulic clamping options in the machining area Pneumatic clamping options in the machining area Römheld hydraulic unit (max. hydraulic pressure: 500 bar) Additional equipment Chip conveyor Coolant nozzle in the machining area Enclosed work area enclosure according to UVV Automatic measuring probe RWP20.00 Various SK40 tool interfaces Technical documentation Layout plan

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 416158, travel distance X-axis: 1,200 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 250 mm, spindle speed (max.): 20,000 rpm, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item on time between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 900 mm Travel range Z-axis: 250 mm Z-axis through-hole: 200 mm T-slot clamping table: 1,250 × 1,000 mm Table dimensions: approx. 1,250 × 1,000 mm Spindle speed: max. 20,000 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,700 x 1,900 mm Weight: 750 kg EQUIPMENT Dsdpfez Il Rrox Ai Sjcn Documentation Accessories Note: The tool changer is not installed. External reference: Wup - Lot 16

Condition: good (used), Year of construction: 2002, functionality: fully functional, total height: 2,900 mm, total length: 5,000 mm, total width: 3,000 mm, table width: 850 mm, table length: 1,250 mm, overall weight: 8,000 kg, spindle motor power: 15,000 W, number of spindles: 1, type of input current: AC, Equipment: chip conveyor, documentation/manual, We are offering a machining center from the manufacturer Ibarmia with a controlled 4th axis/rotary table. The machine is in good condition and can be inspected and tested in our facilities while powered on. Manufacturer: Ibarmia Type: ZV25/L16000 Year of manufacture: 2002 Control: GE Fanuc Series 18i-M Technical data: Dcedpfx Aoz Ia U Esi Son Travel distances X-Y-Z: 1600x410x410 mm Travel distance B-axis: 360*0.001° Rapid traverse X: 40 m/min Rapid traverse Y-Z: 60 m/min Main spindle: Spindle speed: 15,000 rpm Main spindle power: ISO-SK-40 Tool changer: Number of positions: 24 Machining area: Table dimensions: 850x1250 mm Internal coolant supply (IKZ) Machine dimensions: 5000x3000x2900 mm Weight: 8,000 kg

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Brand: BRETON Italia Model: XCeeder 1200 RT Type of machine: Vertical CNC machining center, 3 axes Year of construction: 2002 CNC control: SELCA S4045PD Working Capacity X-axis travel: 1,200 mm Y-axis travel: 1,000 mm Z-axis travel: 600 mm Table dimensions: 1,500 × 1,000 mm Rapid Traverse Rates X-axis: 60,000 mm/min Y-axis: 60,000 mm/min Z-axis: 40,000 mm/min Spindle Maximum spindle speed: 18,000 rpm Spindle taper: HSK-A63 Spindle line cooler Tool Magazine Automatic tool changer (ATC) Capacity: 30 tools Set of HSK-A63 tapers Assorted tooling Measuring Systems Measuring scales on the axes: X Y Z Coolant and Chip Management Coolant collection tank Chip conveyor Washing pumps CTS pump for coolant through the spindle High-pressure CTS system External unit for CTS system Accessories: Coolant collection tank Chip conveyor Washing pumps High-pressure CTS pump through the spindle CTS external unit Scales on the X / Y / Z axes Spindle line cooler Fume extractor No. 2 magnetic tables Set of HSK-A63 tapers Assorted tooling Documentation: Djdpjz Iakmefx Ai Sscn Machine manuals Electrical diagrams CE Declaration of Conformity Key Features: Vertical CNC machining center, 3 axes Large working travels: 1,200 × 1,000 × 600 mm High rapid traverse rates up to 60,000 mm/min High-speed spindle up to 18,000 rpm HSK-A63 spindle taper Automatic tool changer with 30 tools Measuring scales on the X, Y, and Z axes High-pressure CTS system Spindle line conditioning Chip conveyor and washing system Fume extractor No. 2 magnetic tables Complete with a set of HSK-A63 tapers and assorted tooling Complete with manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2008, functionality: unexamined, machine/vehicle number: 2200180, travel distance X-axis: 1,600 mm, travel distance Y-axis: 815 mm, travel distance Z-axis: 815 mm, spindle speed (max.): 4,500 rpm, spindle motor power: 20,500 W, The Saeilo Contur KV 1600 is a used vertical machining center, manufactured in 2008 by Kent Industrial in Taiwan and distributed in Germany through Saeilo. With an X-axis travel of 1,600 mm and 815 mm in Y and Z, it is suitable for long plates, housings, and fixture components that can no longer be accommodated on smaller machining centers. It is controlled by a Siemens Sinumerik 840D. The machine is located in the Düsseldorf area. TECHNICAL DATA - Year of manufacture: 2008 - Control: Siemens Sinumerik 840D - Travel X / Y / Z: 1,600 / 815 / 815 mm - Spindle speed max.: 4,500 rpm - Spindle drive: 15 / 20.5 kW, ball screws - Tool holder: ISO 40 - Tool magazine: 32 positions - Gearbox: ZF two-stage gearbox EQUIPMENT AND ACCESSORIES - Chip conveyor Mayfran LT 200 LS - Tool holders, partially populated - Drilling and milling tools - Two vices on the table (according to the photos) CONDITION During our inspection on October 1, 2026, the machine was not in operation. Therefore, we are selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION Typical applications include plates, housings, molds, and fixtures in mechanical engineering and contract manufacturing. The long X-axis travel also allows for shuttle machining with two setups. LOCATION AND PROCEDURE Dcjdpfx Ajz H Uf Noi Son The machine is located in the Düsseldorf area. Inspection is possible by appointment. The buyer is responsible for disassembly, loading, and transport; upon request, we can provide contact details for local freight forwarders. Price upon request. Please feel free to contact us via the contact form.

Condition: ready for operation (used), Year of construction: 2015, travel distance X-axis: 1,270 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table width: 584 mm, table length: 1,321 mm, table load: 1,815 kg, spindle speed (max.): 8,100 rpm, spindle motor power: 22,400 W, number of slots in tool magazine: 24, number of axes: 4, This 4-axis HAAS VF 5/40 was manufactured in 2015. It features an X-axis travel of 1270 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a tool changer capacity of 24 positions and a maximum table load of 1815 kg. If you are looking to get high-quality machining capabilities, consider the HAAS VF 5/40 vertical machining centre we have for sale. Contact us for further details. • X-axis rapid traverse: 18.0 m/min • Y-axis rapid traverse: 18.0 m/min • Z-axis rapid traverse: 18.0 m/min • Distance spindle nose to table (max): 742 mm • Distance spindle nose to table (min): 107 mm • Max spindle torque: 122.0 Nm @ 2000 rpm • Table T-slot width: 14 mm • Table T-slot pitch: 80 mm Additional equipment • Included documentation: Manuals and CE Declaration of Conformity Dcjdpjz Erwtsfx Ai Ssn Technical Specification Taper Size BT 40

Condition: used, Year of construction: 2000, functionality: limited functionality, travel distance X-axis: 1,500 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 450 mm, total height: 2,100 mm, total length: 3,500 mm, total width: 2,200 mm, table load: 700 kg, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, distance table to spindle center: 600 mm, input voltage: 380 V, type of input current: three-phase, distance stand to spindle center: 450 mm, distance table to quill: 450 mm, grinding spindle motor power: 20 W, grinding spindle speed: 3,000 rpm, LGB brand surface grinder, machine with few hours of use, price plus VAT. Dcsdez Eac Rjpfx Ai Sjn I have other machines for the metalworking industry; please contact me.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details x-travel 1200 mm y-travel 600 mm z-travel 600 mm Control Heidenhain iTNC 530 spindle speed: 6000 1/min. spindle taper CAT-50 ISO spindle drive (S1) 10 kW table surface area 1300 x 600 mm table load 1200 kg feed speeds 1-10000 mm/min rapid travel x/y/z 20/20/15 m/min distance table - lower edge spindle 125-725 mm total power requirement 25 kVA weight of the machine ca. 7,5 t dimensions of machine 3600 x 2300 x 3000 mm Additional information Equipped with: * CNC control Heidenhain iTNC 530 Dcjdpfx Aiez D Amve Sjn * Electr. portable handwheel * Spindle oil cooler * Tool changer 24-pos., double arm changer - Max. tool diameter 80/150 mm - Max. tool length 250 mm - Max. tool weight 8 kg * Preparation for hydraulic machine vice * Preparation for 3-D measuring probes * Chip conveyor * Coolant system, coolant through spindle 20 bar * Machine documentation Working hours (date 29. July 2026): - Control on: 60.822 h - Machine on: 59.602 h - Program cycle: 22.283 h - Spindel on: 19.522 h

Condition: used, YEAR 2015 MANUFACTURER HAAS AUTOMATION INC MODEL VF 5/40 Dcjdpez Dwqvefx Ai Sjn CNC HAAS

Condition: used, Year of construction: 2014, functionality: fully functional, Travel ranges Travel distance X-axis [mm] 760 Travel distance Y-axis [mm] 530 Travel distance Z-axis [mm] 560 Distance from spindle bottom edge to table [mm] 150-710 Work table Table length [mm] 900 Table width [mm] 500 Number of T-slots 5 Slot width [mm] 18 Table load max. [kg] 500 Feed Rapid traverse X- and Y-axis [m/min] 40 Rapid traverse Z-axis [m/min] 36 Max. axis acceleration X-axis [m/sec²] 6 Max. axis acceleration Y-axis [m/sec²] 5 Max. axis acceleration Z-axis [m/sec²] 5 Max. feed force X-axis [kN] 6.951 Max. feed force Y-axis [kN] 6.951 Max. feed force Z-axis [kN] 11.31 Diameter of ball screw X- and Y-axis [mm] 45 Diameter of ball screw Z-axis [mm] 45 Main spindle Main spindle speed min. [1/min] 30 Main spindle speed max. [1/min] 12,000 Main spindle power [S6-40% duty cycle kW] [kW] 25 Main spindle torque max. [Nm] 159 Tool holder SK 40 DIN 69871 A Tool magazine Number of tool magazine positions 30 Tool change time chip-to-chip [sec] 4 Max. tool diameter [mm] 76 Max. tool diameter with adjacent space available [mm] 125 Max. tool length [mm] 280 Max. tool weight [kg] 7 Dcsdpfx Aijz Dttge Sjn Coolant system Coolant tank volume [l] 300 Through-spindle cooling pressure [bar] 3.5 Through-spindle cooling [l/min] 60 Internal coolant supply pressure [bar] 20 Internal coolant supply [l/min] 25 Chip flushing pressure [bar] 3.5 Chip flushing [l/min] 60 Coolant spray gun yes External compressed air supply yes Separate oil cooler for main spindle yes Oil cooling circuit [l] 100 Separate air supply for main motor yes Basic machine data Installation area width [mm] 2,540 Installation area depth [mm] 2,600 Machine height [mm] 2,930 Weight of basic machine [kg] 6,400 Electrical connection power [kVA] 25 Required pneumatic connection [bar] 6 Required compressed air [l/min] 300 Control system Manufacturer Heidenhain Control system type iTNC 530 HSCI with SmarT.NC Chip disposal Internal screw conveyor 2 Scraper belt conveyor to the outside 1

Condition: good (used), Year of construction: 2010, functionality: fully functional, Matec 30 L, Year of manufacture: 2010, Control system: Heidenhain iTNC 530, Dcsdpfx Aioz Dgr Nj Sjn Travel range X/Y/Z: 1300/600/700 mm, Spindle speed up to 12,000 rpm, Tool holder: HSK 63 - A, Electric handwheel, Coolant pressure: 20 bar, Paper band filter, Coolant capacity: 80 liters, Full enclosure for the working area, Direct measuring systems, Chip conveyor, Bellows with steel lamellae, 3D measuring probe, Laser measuring device.

Condition: good (used), Year of construction: 2006, functionality: fully functional, Machine type: 5-axis CNC vertical machining center Control system: Heidenhain iTNC 530 Travel in X: 700 mm Travel in Y: 660 mm Travel in Z: 480 mm A-axis: ±110° Dcodpez Dd U Ijfx Ai Sen C-axis: 360° Max. spindle speed: 15,000 rpm Spindle connection: SK 40 Tool changer: 48 tool positions Machine weight: approx. 10,000 kg Configuration: X / Y / C / A + Z Design: 5-axis simultaneous machining

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VP 4SS was manufactured in 2014. It features an impressive X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool change count of 67,000. If you are looking to get high-quality machining capabilities, consider the HAAS VP 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 14,700 h • Tool changes count: 67,000 • Voltage: 354–488 V • Phase: 3 Dcjdoz Dauwspfx Ai Sen • Frequency: 50/60 Hz • Full load current: 40 A

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, total height: 3,000 mm, total width: 2,300 mm, overall weight: 6,800 kg, spindle speed (max.): 12,000 rpm, product length (max.): 3,200 mm, number of axes: 3, This 3-axis HAAS VF 4SS was manufactured in 2018. It features an X-axis travel of 1,270 mm, Y-axis travel of 508 mm, and Z-axis travel of 635 mm. The machine operates at a spindle speed of 12,000 RPM and has a tool changes count of 69,000. If you are looking to get high-quality machining capabilities, consider the HAAS VF 4SS vertical machining centre we have for sale. Contact us for further details. • Operating hours: 31,300 h • Tool changes count: 69,000 • Voltage: 440 V • Phase: 3 Dcsdez Dar Nspfx Ai Ssn • Frequency: 50/60 Hz • Full-load current: 35 A

Condition: used, Year of construction: 2001, functionality: unexamined, machine/vehicle number: 220 294-0059, travel distance X-axis: 1,650 mm, travel distance Y-axis: 810 mm, travel distance Z-axis: 810 mm, controller manufacturer: Heidenhain, table width: 780 mm, table length: 1,800 mm, overall weight: 11,400 kg, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, CNC vertical machining center TAJMAC-ZPS MCFV 1680 NT, year of manufacture 2001, Heidenhain control. Type MCFV 1680NT P26.00, No. 220 294-0059, weight 11,400 kg, connection 400 V, 100 A, 50 Hz. Travel ranges X/Y/Z: 1,650 x 810 x 810 mm, table area 1,800 x 780 mm with 5 T-slots. Equipment: full enclosure, chip conveyor with chip cart, electronic handwheel, signal light. Dsdpfx Ajz A Uhpoi Sscn Location: Homburg (Saar), Germany. Inspection by appointment only. Price on request, net plus VAT, ex works; dismantling and loading upon agreement. All information without guarantee.

Condition: like new (used), Year of construction: 2023, operating hours: 2,509 h, functionality: fully functional, machine/vehicle number: 20240104, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Heidenhein iTNC 640, spindle speed (max.): 10,000 rpm, For sale is a vertical machining center with only 2,509 program running hours (as of September 15, 2026)! The machine is in first-hand condition and was assembled directly by the manufacturer! Inspections or test machining are possible at any time by arrangement. TECHNICAL DETAILS Travel in X-axis: 1,600 mm Travel in Y-axis: 800 mm Travel in Z-axis: 800 mm Rapid traverse rate X-axis: 32 m/min Rapid traverse rate Y-axis: 32 m/min Rapid traverse rate Z-axis: 32 m/min Table length: 1,700 mm Table width: 800 mm Workpiece length max.: 1,700 mm Workpiece width max.: 800 mm Workpiece height max.: 800 mm Workpiece weight max.: 1,500 kg Number of spindles: 1 Spindle speed: 1 – 10,000 rpm Speed control: stepless Spindle motor power: 37 kW Tool holder: SK 40 Mounting diameter: 40 mm Torque: 235.5 Nm Air through the spindle: available Tool magazine positions: 60 Tool changer: operable from the front MACHINE DETAILS Control: Heidenhain iTNC 640 Internal cooling: 20 bar Filter unit: band filter unit Input voltage: 380 V Input current type: three-phase Program running hours: 2,509 h (as of September 15, 2026, machine is currently still in operation) Dimensions & Weight Dimensions (L x W x H): 5,800 x 4,300 x 3,000 mm Machine weight: 15,000 kg EQUIPMENT CE marking Chip conveyor Dcjdpfx Asz Arkkji Son Documentation/Manual Glass scales in all 3 axes Hexagon 3D infrared probing system Mobile electronic handwheel Internal cooling with 20 bar and band filter unit Air through the spindle Tool changer with 60 positions, operable from the front

Condition: ready for operation (used), Year of construction: 2017, operating hours: 9,800 h, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain 530, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel range X-axis: 1,200 mm Travel range Y-axis: 600 mm Travel range Z-axis: 630 mm Spindle speed max.: 15,000 rpm Tool holder: BT40 MACHINE DETAILS Control system manufacturer: Heidenhain 530 Dcodpfx Aiez Apd Ue Son Operating hours: 9,800 h Machine weight: approx. 7,700 kg EQUIPMENT Chip conveyor

Condition: good (used), Year of construction: 2003, functionality: fully functional, X-axis travel: 1270 mm Y-axis travel: 660 mm Z-axis travel: 610 mm Control system: Ultimax 4 Table load capacity: 1300 kg Spindle speed: 10,000 rpm Automatic tool changer: 24-position Tool holder: SK 40 Drive power: 15 kW Table size: 1500x660 mm Dedpfx Aisz Anxws Secn Total power consumption: kW Machine weight: approx. 9 tons Space requirement: approx. 4.8x4.5x2.95 m

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS VF-4SS was manufactured in 2019. It features impressive X/Y/Z axis travels of 1,270 x 508 x 635 mm and a maximum spindle speed of 12,000 rpm. The machine is equipped with a tool changer capacity of 30+1 tools and offers high-speed machining capabilities. If you are looking to get high-quality machining capabilities, consider the HAAS VF-4SS vertical machining center we have for sale. Contact us for further details. • Tool taper: BT-40 Djdpoz Ah S Defx Ai Sscn • Rapid Traverse: 35.6 m/min • Cooling pressure: 21 bar • Chip conveyor: Screw-Type Chip Conveyor • Machine Type: Vertical Machining Center • Spindle Nose to Table: 102 mm • Max. Cutting Feed Rate: 20.5 m/min • Tool Changer: Random • Tool Changer Capacity: 30+1 tools, vertical • Power Failure Detection Module: Yes • Interface: USB / LAN • Rigid Tapping: Yes • Coordinate Rotation System: Yes • Programmable Coolant Nozzle: Yes • Automatic Air Blast: Yes • Renishaw Wireless Intuitive Probing System: Yes • Macro Variables and Scaling Factors: Yes • High-Speed Machining: Yes • Auxiliary High-Pressure Filter: Yes

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 1,600 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, total height: 3,100 mm, total width: 4,400 mm, table width: 800 mm, overall weight: 16,000 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 18,000 W, product length (max.): 4,900 mm, number of axes: 3, This 3-axis AWEA BM-1600 was manufactured in 2007. It features an impressive X-axis travel of 1,600 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm. The machine is equipped with a FANUC CNC control and has a robust table size of 2,000 x 800 mm. If you are looking to get high-quality machining capabilities, consider the AWEA BM-1600 vertical machining centre we have for sale. Contact us for further details. • Spindle speed range: 30–6,000 rpm • Tool taper: ISO 50 • Rapid Traverse: 20 / 20 / 18 m/min • Outer length / Table length: 2,000 mm • Outer width / Table width: 800 mm • Spindle Center to Column Distance: 900 mm • Table to Spindle Distance: 900 mm • Gear Range Change: Yes • Tool Magazine Capacity: 40 tools • General condition: Good • Tool magazine requires repair or replacement Dcodpfjz Ah Ryox Ai Sjn