Schmiede Wirz

Condition: not inspected (used), Year of construction: 1993, functionality: unexamined, machine/vehicle number: AQ1195020, overall weight: 1,800 kg, Equipment: documentation/manual, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Bidding obligates timely collection between 01/12/2025 and 05/12/2025! MACHINE DETAILS Motor Total power: with hydraulics 5.0 kW / without hydraulics 7.2 kW Voltage: 400 V Total current: with hydraulics 12 A / without hydraulics 18 A Frequency: 50 Hz Motor protection class: IP 55 Hydraulics Max. flow rate: 6.4 l/min Max. pressure: 200 bar Oil tank capacity: 13 l Recommended hydraulic fluid: ESSO Hydraulic Oil HLP32 Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,350 x 1,500 mm Total weight: 1,800 kg Lajdpfx Asxp Nquoabjh EQUIPMENT Accessories as shown in the photos Technical documentation

Condition: used, Year of construction: 2005, functionality: fully functional, Huta Zygmunt MPM 3150C Forging Hammer Ram weight: 1,250 kg Total weight: 32,000 kg Ledsxdvnpopfx Aaboah The forging hammer is dismantled and ready for loading onto a truck.

Condition: excellent (used), Blacksmith forge Manufacturer: Pharos Hamburg Internal combustion chamber dimensions: 80 x 200 mm Height: 160 mm gas-powered Lodpfjxcychex Aabjah Space requirements: Depth: 500 mm Width: 670 mm Height: 1300 mm

Condition: used, Year of construction: 1980, loading area mit Untergestell Lodpfx Aaew Sykxebeah weight 125 kg length 900 mm height 350 mm

Condition: used, Year of construction: 1960, length 880 mm weight 60 kg Ledew Syi Uepfx Aaboah height 320 mm

Condition: ready for operation (used), Forging hammer CM 2500, Romania. The hammer is similar to Huta Zygmunt MPM 6300B. - Maximum impact energy at maximum stroke – 7000 kgm - Ram weight – 2500 kg - Mode of operation – pneumatic - Ram stroke – 850 mm - Number of blows per minute – 100 - Working pressure – 5 - 7 bar Lajdpew Sdxaefx Aaboh - Anvil weight – 48 t - Total weight – 65 t

Condition: ready for operation (used), Romanian Forging Hammer CM 3150 The hammer is similar to Huta Zygmunt MPM 10000B. - Maximum impact energy at maximum stroke – 10,000 kgm; - Ram weight – 3,150 kg; - Mode of operation – pneumatic; Lajdpfx Ajw Sdwvsaboh - Ram stroke – 900 mm; - Number of blows per minute – 90; - Working pressure – 5 – 7 bar; - Anvil weight – 63 t - Total weight – 100 t.

Condition: good (used), Forging Hammer - Meitinger Record - Very good overall condition - Various forging inserts - Large support flange - Foot switch - Connection cable Dimensions (LxWxH): 1.5x0.7x1.7 meters / Weight: 1800 kg Errors and omissions excepted. Ljdpfxow H S Irs Aaboah

Condition: used, Automatic Multi-purpose Iron Twister GLASER Type GDM 3 motor-driven rod twisting machine equipped with ring bending attachment, profile bending machine Year of manufacture: 1977 Twisting length: 1200 mm Twisting speed (Level 1): approx. 10 rpm Twisting speed (Level 2): approx. 20 rpm - Spindle drive via large geared motor - Arch and ring bending machine, not complete - with HAWE hydraulic unit up to 600 bar for auxiliary functions Laedjw Dgi Topfx Aabjh - 4-square tool holder for twisting tools Motor power: 3.3 kW Power supply: 380 Volt, 50 Hz Space required (L x W x H): 2120 x 720 x 1100 mm Weight: approx. 600 kg Good condition

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, Forging units - Units consisting of 3 machines, to ensure efficient and automatic series production: 1 piece of ring rolling mill, 1 piece of manipulator, 1 piece ofring raw press The forging units / machines can be inspected by appointment. Condition: In good working order / operational. Item 1: Ring rolling mill Brand: WAGNER / Type: RAW 125/100 / Year of manufacturing: 1986 Item 2: Transport manipulator Brand: DANGO & DIENENTHAL / Type: STM 12 / Year of manufacturing: 2001 Item 3: Ring blank press (electro-hydraulic) Brand: WAGNER / Type: RStPö 1500 S / Year of manufacturing: 1986 NOTE: Just the complete package is available for sale (no individual items). There is no guarantee for correctness and completeness of the technical details and accessoires. - Subject to prior sale. Detailed technical data sheets and information on equipment available on request. Lsdswx Sqrjpfx Aabjah

Condition: good (used), Offer 21339 Technical data: Lajdpfx Aaewp Hgisbjh - Total width approx. 740 mm - Work surface length / track length approx. 510 mm - Work surface depth / track depth approx. 150 mm - Total depth approx. 330 mm - Round horn approx. 220 mm - Pass-through square hole in track approx. 27 mm - Anvil height approx. 380 mm - Wooden block B 650 x D 500 x H 450 mm - Weight anvil approx. 200 kg - Weight wooden block approx. 70 kg

Condition: ready for operation (used), Year of construction: 1955, An Eumuco screw forging press (Screw-Press) is available. Forming stages: 2, press force: 1250kN, hold-down force: 2500kN, stroke rate: 80rpm, ram stroke: 140mm, hold-down stroke + punch: 100mm, table dimensions X/Y: 680mm/680mm, ram dimensions X/Y: 680mm/680mm, drive power: 35kW. On-site inspection is possible. Lajdswm Nm Tspfx Aabeh

Condition: ready for operation (used), Year of construction: 1964, Forming stages: 3, press force: 6500kN, stroke rate: 110rpm, ram stroke: 180mm, working range X/Y: 600mm/800mm, table dimensions X/Y: 800mm/1000mm, ram adjustment: 10mm, drive power: 37kW. On-site inspection is possible. Laedpewm Nm Hofx Aaboh

Condition: used, functionality: fully functional, machine/vehicle number: S/N 74749, overall weight: 5,500 kg, After we purchased this stretching roller, it was disassembled and completely overhauled by a specialist company. All bearing shells, bearings, some gear components, etc. were replaced, the shafts were reworked, a more powerful motor was installed, the mounting option for entire rings was developed and manufactured, etc. All documentation is available. The machine stands on adjustable casters (original EUMUCO) and can therefore be easily moved. The machine has not been used since then, as production has been changed. An on-site inspection is recommended. Due to its age, no warranty! Loading on-site is possible. Lajdpfswktdwex Aaboh Price negotiable net plus VAT. Best regards, Markus Balbach

Condition: used, Year of construction: 1921, length 620 mm width 130 mm height 300 mm weight 88 kg Antik +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++ Lsdpswhqzhjfx Aaboah

Condition: ready for operation (used), We can offer Sakamura cold nut formers models: NP 430, NP 440, NP 450, NP 460, NP 480 Ljdpev H Ap Aofx Aabsah Diameter of bars from 4mm -33 mm All machines underpowered

Condition: used, Blow energy: 4000 kg/m Max. stroke: 520 mm Max. stroke rate: 125 s.p.m. Die height: 350 mm Ram weight: 1760 kg Lasdpfsvam Ezox Aabsh Dimensions L x W x H: 2250x1400x3300 mm Weight of machine approx.: 40500 kg

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Ljdpfx Aaevam Enjbjah Anvil weight: 75000 kg Weight of machine approx.: 103000 kg

Condition: used, Blow energy: 11000 kg/m Max. stroke: 900 mm Daylight between guides: 750 mm Length of die seat in ram: 750 mm Max. stroke rate: 90 s.p.m. Die seat length in die holder: 1050 mm Min. die thickness: 350 mm Max. upper die weight: 1100 kg Operating height: 780 mm Anvil weight: 75000 kg Lsdpfevam Ebsx Aabsah Weight of machine approx.: 103000 kg

Condition: used, Year of construction: 1978, Blow energy: 7000 kg/m Max. stroke: 850 mm Max. stroke rate: 100 s.p.m. Length of die seat in ram: 650 mm Ram weight: 2500 kg Die seat length in die holder: 900 mm Min. die thickness: 300 mm Max. upper die weight: 800 kg Ledpfsvam D Rjx Aaboah Operating height: 780 mm Anvil weight: 47500 kg Weight of machine approx.: 64000 kg

Condition: used, Technical details: Laodpfxou Nkw Ro Aabjh weight of the machine approx.: 179 kg space requirements of the machine approx.: 0,75 x 0,335 x 0,340 m Use: for forging work Material cast steel Working surface LxW: 510 x 140mm Horn length: 225mm Ø 28 - Ø 110mm Mandrel square 28 x 28mm *

Condition: used, Lasko hammer KGK 063 Lajdpfx Aeu Eb Nijabeh Impact force 630 mkp Stroke max. 630 mm Bear weight 630kp Top pressure - filling pressure 5 bar

Condition: new, Say-Mak SPH 50 - Pneumatic forging hammer - Welded steel construction - Regular striking with valve adjustment - Pneumatic working system with 2 pistons - Hour counter - All dies and sal-block interchangeable, sal-block adjustable in 8 directions - Adjustable sal-block for the operator's working angle - Simple and functional automatic lubrication system for front and rear pistons - Adjustable foot pedal depending on working height and foot protection cover - 360° adjustable flanged plunger and plexiglass cover - incl. steel foundation Ledpeuzhkrofx Aabjah Technical specifications - Operating mode: pneumatic - Drop weight: 50 kg - Lifting height: 185 mm - Motor power: 4 kW - Weight: 1000 kg - Dimensions WxHxD: 730 x 1450 x 1750 mm

Condition: new, Zimas H20 - Air forging hammer - solid cast iron body - steel base - Hand and foot operation - Adjustable oiler - incl. upper and lower tool (flat dies) Technical specifications - Capacity: 20 kg - Stroke rate: 270 / min - Lifting height: 200 mm - Projection: 180 mm - Cylinder Ø: 115 mm Lsdjuzhc Iepfx Aabeah - Working height: 850 mm - Motor power: 2.2 kW - Voltage: 400 V - Dimensions WxHxD: 520 x 1550 x 1180 mm - Weight: approx. 520 kg

Condition: used, Year of construction: 1960, width 1000 mm Ljdpfx Aajuhh E Tebjah weight 88 kg height 390 mm