Fritz Gross GmbH

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fully automatic operation Drive 7.5 kW, S6, 400 V, 50Hz, 2850 rpm For use with saw blades D 550 mm Cutting range 270x140 mm (width x height), D 185mm Max. profile width 270mm Control unit with display Including piece counter Including reversing device for a maximum cut length of 3000mm Automatic shut-off via limit switch when material ends Kodpeyvtyvsfx Abcsww Hydropneumatic saw blade feed, continuously adjustable, from bottom to top Vertical and horizontal clamping units, on both infeed and outfeed sides of the saw head Pneumatic dosing spray device Cutting gap extension on both sides of the saw blade Electronic material feed unit 3-600mm feed length, with ball screw spindle and servomotor Including pneumatic horizontal and vertical clamping device Remnant piece from 75mm, depending on profile 2 extraction ports D 100 mm Safety guard over the saw head and feed unit A suitable extraction system can also be offered!

Condition: used, Year of construction: 2009, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm Kjdpfx Aeyrhu Sebcoww total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Hydropneumatic Fully Automatic • Mitering Left/Right • Bevel cuts up to 45° (shifter) a. b. • Pneumatic double clamping device • Pneumatic vertical clamping device • Integrated coolant spray system MPS control: • Save cutting start/end position • Display of power consumption, piece count, cutting time, etc. • Adjustable water cooling • Cutting pressure regulator

Condition: new, Year of construction: 2026, saw blade diameter: 315 mm, cutting range round steel at 90°: 100 mm, warranty duration: 12 months, saw blade speed: 80 rpm, cutting range square steel at 90°: 80 mm, Equipment: documentation/manual, Fully Automatic Straight Cut Tube and Profile Sawing Machine Kwjdoyg H S Sjpfx Abcsw Product Overview The fully automatic straight cut tube and profile sawing machine is designed for precise, fast, and repeatable 90° cutting of round tubes, square, and rectangular profiles in industrial production lines. With a servo motor and ball screw-controlled material feeding system, a hydro-pneumatically operated saw head, and a PLC-controlled touchscreen, it ensures stable cutting quality and high production efficiency. Key Features - Fully automatic straight cut tube and profile sawing machine - Servo motor and ball screw-controlled material feeder - Adjustable and controlled cutting speed with hydro-pneumatically operated saw head - PLC-controlled touchscreen - Up to 1000 mm single-feed and cutting per cycle - Multi-feed option for cutting longer than 1000 mm - Ability to cut four different lengths on the same material in a single batch - Dual-speed motor for optimal RPM selection according to material properties - High-performance gearbox with double helical gear transmission Cutting Capacity (Tube & Profile) - Maximum Saw Blade Diameter: 315 mm - Cutting Angle: 90° (±45° optional) - Round Tube: Max. Ø 100 mm - Square Profile: Max. 80 × 80 mm - Rectangular Profile: Max. 110 × 80 mm - Minimum End Scrap Length: 120 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 3 kW - Current: 10.2 A - Saw Motor: 1.8 – 2.2 kW - Coolant Pump: 0.09 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 40 / 80 rpm - Angle Rotation: 90° Saw Blade Specifications - Saw Blade Diameter: 315 mm - Blade Bore Diameter: 32 mm - Pin Holes: 2 × Ø11 - Coating Options: - TiN: For medium hardness steels - TiCN: For high rigidity steels - TiAlN: For stainless steels Machine Dimensions & Weight - Width: 1900 mm - Length: 1400 mm - Height: 1600 mm - Net Weight: 620 kg - Gross Weight: 650 kg

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, cutting range round steel at 45°: 80 mm, rotational speed (max.): 100 rpm, warranty duration: 12 months, saw blade speed: 100 rpm, cutting range square steel at 45°: 80 mm, cutting range square steel at 90°: 90 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine-Type Mitre Tube and Profile Cutting Saw Machine Kwsdjyg H Rnopfx Abcow General Description The fully automatic magazine-type mitre tube and profile cutting saw machine is designed for precise and high-speed cutting of round tubes, square, and rectangular profiles at 90° and ±45° / ±60° angles in industrial production lines. With servo motor-controlled automatic angle rotation, PLC-controlled colour touch screen, and a patented anti-vibration cutting system, it delivers high cutting quality, long saw blade life, and repeatable precision. Key Features • Fully automatic magazine-type mitre tube and profile cutting saw machine • Servo motor-controlled automatic angle rotation up to ±60° • PLC-controlled colour touch screen • Servo motor and ball screw-driven material feeding system • Vertical cutting system with servo motor and ball screw movement, operating on a linear guide • Variable cutting speeds: - Slow at material entry - Fast during cutting - Slow at exit • Patented system that eliminates saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends blade life • Inverter-controlled saw speed between 20 – 80 rpm • Servo motor-controlled material feed and stop system • Ability to perform up to 10 different length cuts on the same material • ±0.2 mm length accuracy (may vary depending on saw blade runout) Cutting Capacity (Tube & Profile) Maximum Saw Blade Diameter: 350 mm Cutting Angles & Capacities Angle | Round Tube (max.) | Square Profile (max.) | Rectangular Profile (max.) -----|-----|-----|----- 90° | Ø 90 mm | 90 × 90 mm | 100 × 80 mm ±45° | Ø 80 mm | 80 × 80 mm | 100 × 40 mm ±60° | Ø 50 mm | 50 × 50 mm | 50 × 50 mm Minimum Final Scrap Length: 290 mm Technical Specifications • Main Voltage: 400 V • Control Voltage: 24 V • Installed Power: 8.7 kW • Current: 31.8 A • Saw Motor: 4 kW • Coolant Pump: 0.09 kW • Air Pressure: 6 kg/cm² (240 l/min) • Saw Speed: 20 – 80 rpm (Inverter controlled) • Angle Rotation: 90° / ±45° / ±60° Saw Blade Specifications • Saw Blade Diameter: 350 mm • Bore Diameter: 32 mm • Pin Holes: 2 × Ø11 Coating Options: • TiN: For medium-hard steels • TiCN: For high rigidity steels • TiAlN: For stainless steels Machine Dimensions & Weight • Width: 7650 mm • Length: 2650 mm • Height: 2150 mm • Net Weight: 3320 kg • Gross Weight: 3350 kg

Condition: new, Year of construction: 2026, saw blade diameter: 350 mm, cutting range round steel at 90°: 90 mm, rotational speed (max.): 100 rpm, cutting range square steel at 90°: 80 mm, Equipment: cabin, documentation/manual, rotational speed infinitely variable, Fully Automatic Magazine Tube and Profile Cutting Saw Machine General Description The fully automatic magazine tube and profile cutting saw machine is designed for industrial production lines to perform cutting operations on round tubes, square, and rectangular profiles. With its PLC-controlled color touchscreen, precision servo-driven feeding system, and patented anti-vibration construction, it offers high accuracy, extended saw blade life, and continuous production performance. The magazine structure and programmable cutting functions allow cutting at different lengths on the same material, minimizing operator dependency. Key Features - Fully automatic magazine tube and profile cutting saw machine - PLC-controlled color touchscreen - Material feeding system controlled by servo motor and ball screw - Vertical cutting system moving on a linear rail, driven by servo motor and ball screw - Variable cutting speeds: - Slow on material entry - Fast during cutting - Slow again on exit - Patented system eliminating saw blade backlash: - Eliminates vibration and resonance - Prevents saw blade breakage - Extends saw blade life - Saw speed variable between 20 – 100 rpm (inverter controlled) - Single-stroke feeding and cutting up to 1000 mm - Ability to cut up to 10 different lengths on the same material - High-performance gearbox suitable for continuous operation - Length accuracy of ±0.2 mm (may vary depending on the runout of the saw blade) Cutting Capacity (Tube & Profile) - Maximum saw blade diameter: 350 mm - Cutting angle: 90° Round Tube: - Min. Ø15 mm – Max. Ø90 mm Square Profile: - Min. 15 × 15 mm – Max. 80 × 80 mm Rectangular Profile: Kwjdoyg H Nqopfx Abcow - Min. 15 × 15 mm – Max. 80 × 80 mm - Minimum Remnant Length: 120 mm Technical Specifications - Main Voltage: 400 V - Control Voltage: 24 V - Installed Power: 7.64 kW - Current: 26.6 A - Saw motor: 4 kW - Cooling oil pump: 0.09 kW - Air Pressure: 6 kg/cm² (240 l/min) - Saw Speed: 20 – 100 rpm (inverter controlled) - Cutting Angle Rotation: 90° Saw Blade Specifications - Saw Blade Diameter: 350 mm - Bore Diameter: 32 mm - Pin Holes: 2 × Ø11 - Coating Options: - TiN: Medium hardness steels - TiCN: High rigidity steels - TiAlN: Stainless steels Machine Dimensions & Weight - Width: 8800 mm - Depth: 2300 mm - Height: 2020 mm - Net Weight: 2750 kg - Gross Weight: 2790 kg

Condition: excellent (used), Year of construction: 2007, Complete saw line consisting of loading unit, fully automatic circular saw, and unloading unit. Suitable for a wide range of applications, especially in the photovoltaic and automotive industries. Loading Unit: - Horizontal loading magazine model HLM - 4-strand timing belt conveyor - 6 compartments, each 285mm wide, for profile feeding - Maximum material height according to the saw cutting area; round material up to max. diameter 130mm - 3 sliding strips between timing belts as additional support - Profile length min. 2,700mm, max. 6,500mm Saw: - Fully automatic circular saw Pressta-Eisele model PROFILMA 510 E-SA - Saw blade diameter max. 500mm - Continuously variable speed adjustment - Hydro-pneumatic saw blade feed, infinitely adjustable, from rear to front - Siemens S7-300 control system with touchscreen - Reversing device with five-fold stroke up to max. 5,000mm Kwsdpfx Abexvbvvscew - Electric material feed 3 – 1,000mm (single stroke) - Cutting gap extension on both sides - Pneumatic unloading slide - Scrap flap after saw for offcuts / remains - Cut length depending on profile, from 8mm - Menzel minimum quantity lubrication system - Clamping pressure regulation - Two extraction nozzles for chip extraction Unloading: - Table size 1,500mm x 2,500mm - Pneumatic cross pusher

Condition: refurbished (used), Year of construction: 2025, Complete Overhaul 2025 Saw Blade: 350 - 400 mm Motor Power: 6.5 / 8.5 kW Speed: 1,500/3,000 rpm Cutting Speed: 1,650 – 3,800 m/min Saw Height Adjustment: Electronic Working Range Square, max.: 120x120 mm Working Range Flat, max.: 200x100 mm Working Range Flat, max.: 250x70 mm (for extra width only) Working Range Round, max.: 130 mm Saw Feed Rate: 0 – 40 mm/s, infinitely variable Cut Length: 5-600 mm (up to 9,999 mm with multiple strokes) Feed Speed, max.: 500 mm/s Weight: approx. 1,300 kg Dimensions (LxWxH): 1,800 mm x 1,300 mm x 1,950 mm The machine will be completely overhauled in our facility and will subsequently be in as-new condition. The following components, among others, will be renewed: - Conversion to PLC control - Conversion to Siemens HMI operator interface - Conversion to ball screw with servo drive - New electrical components - New pneumatic lines - New pneumatic components - Conversion to valve terminal - Optimization of extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Overhaul of the machine enclosure The machine additionally features: - Soundproof enclosure - Spacer extension (for high-quality cut surfaces without return marks) Optional: - Multiple clamping device for parallel sawing of multiple workpieces Kodpfxsxpqzho Abcsww - Flat magazine for automatic feeding of raw materials up to 6 m long - 7.5 kW motor - 12 kW motor - Delivery and installation at your site - Training for your staff

Condition: used, Year of construction: 1997, saw blade diameter 350 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 110 mm capacity 90 degrees: flat 200x88 mm capacity 45 degrees: round 115 mm Ksdpfxsxf I U De Abcoww capacity 45 degrees: square 110 mm capacity 45 degrees: square 150x80 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,59 t dimensions 1,9 x 1,4 x 1,8 m Fully automatic hydropneumatic machine · Left/right miter cuts · Head bevel cuts up to 45° (shifter) · Material feed unit with material clamp · Integrated coolant spray system · MPS control: · Saves cut start/end times · Displays power consumption, workpiece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm Kwsdpfxexaa Uxo Abcew capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP CNC total power requirement 2.6 / 3.5 kW weight of the machine ca. 605 kg range L-W-H 2210 x 1680 x 2150 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, High-performance automatic sawing machine / Brand: PRESSTA-EISELE Type: Profilma 510 / Year of construction: 09/2008 Description: * High-performance automatic sawing machine with fully automatic operation, * Very high cutting accuracy, * Low cycle times, * Burdere-free sawing, * High reliability, * Low maintenance Suitable for aluminum and plastic, for cutting large quantities of small parts, length tolerance 1/10 mm. The automatic sawing machine can be inspected and tested by appointment. Previous use: Used for cutting corner connectors. Condition: Very well maintained, used, ready to use. Ksdpfxjw D T Uie Abcsww Technical specifications: - Saw motor: 7,5 kW, S6 - Speed: 2.000 - 3.500 rpm - Cutting speed: up to 92 m/s - Material feed length: up to 1.000 mm / 5-fold reversal possible - Section length: from 8 mm depending on profile - Remaining piece length: from 90 mm depending on section length - Working pressure: 6 - 8 bar - Power supply: Standard: 400 V, 50 Hz - Weight: 1.750 kg - Dimensions Length/Depth/Height: 2.700 x 1.400 x 2.300 mm Equipment: - Control via Siemens S7 panel - Fully automatic bar feed - Roller conveyors - Extraction - Chip bunker - Various accessories - CE marking There is no guarantee for correctness and completeness of the technical details and accessories.

Condition: like new (used), Year of construction: 2017, Used automatic circular saw for aluminium MEP Cobra 352 nc 5.0 Year of manufacture: 2017 Blade dimensions: 350x32x3.4 mm Kwsdpfx Aowu Tz Robcsw Blade cutting speed: 1700/3400 rpm Cutting angle: from -45° to +45° Cutting capacity: at 0° – round: 120 mm, square: 105 mm, rectangle: 180x70 mm Touchscreen Machine weight: 605 kg

Condition: new, Year of construction: 2023, SPECIAL PRICE, Stock machine Year 2023, Condition: new List price + option minimal lubrication system LUBETOOL: €15,370 STOCK MACHINE – Fully Automatic Aluminium Circular Saw 90° Cut With easy, safe operation and excellent cutting performance. This machine is only capable of 90° cuts! Technical data: ● Cutting capacity: 90° round: 100 mm / square: 100 x 100 mm / rectangular: 170 x 60 mm ● Drive power: 1.9 kW / 400 V / 50 Hz ● Speed: 3,000 rpm ● Feed: Single-stroke feed 300 mm (double stroke up to 600 mm) ● Max. cutting height: 100 mm ● Blade size: 350 x 32 mm Standard features: ● Machine for 90° cuts, equipped with a powerful drive motor ● Clear, large-sized control panel ● Adjustable cut-off length from 5 to 300 mm via handwheel and counter ● Main vice with 3 pneumatic clamping cylinders: 1 horizontal, 2 vertical ● Feed vice with horizontal and vertical pneumatic clamping cylinder ● Large safety guard, fully covering the working area, pneumatically lifted ● Adjustable cutting and feed speed ● Air gun for cleaning the machine ● Connections for extraction system Kwjdpfx Asvurgyjbcsw Optional, mounted on stock machine: ● Minimum quantity lubrication system "LUBETOOL" with one pump and pressure regulation

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 Ksdpfx Ajvl Eahjbcsww • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. Kwodpfx Abeuyyhajcew - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Saw band 250-285 mm Motor power 5.5 KW Cutting speed 35-160 m/min Working range square max.: 15 - 60 mm Working range round max.: 15 - 70 mm Saw feed 2 - 100 mm/s infinitely adjustable Cutting length 5-250 mm Feed speed max. 1000 mm/s Weight (saw)approx.: 1500 kg (magazine)approx.: 800 kg Dimensions LxWxH (saw)approx.: 1100mm x 1600mm x 2300mm (magazine)approx.: 7500mm x 1400mm x 1600mm The machine is suitable for mass cutting of steel due to its equipment and construction and is the predecessor of the KASTOwa C7 and KASTOspeed C9. The machine will be in mint condition after a general overhaul (retrofit), which is guaranteed by our company. The machine will be generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - New PLC control Siemens S7 - Conversion to Siemens HMI - Conversion to fully electronic section length selection (optional) - New electrical components - New pneumatic lines - Overhaul or replacement of all pneumatic components - New hydraulic lines - Overhaul or replacement of all hydraulic components - Overhaul of Menzel minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine - Extension of the safety concept The machine also has: - a slide-off magazine for 6m bars - Hydraulic material feed unit Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Conversion to spindle extraction - Conversion to trapezoidal spindle stop manual 0-800mm Kwodeuizlcspfx Abcew - Conversion to fully electronic ball screw stop 0-800mm - Conversion of main saw drive to 18 KW - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 PLC control: Siemens S7 Saw blade 175 - 250 mm motor power 1,5 KW Saw blade feed mm/min Cutting speed: 20 - 170 m/min (varies with optional high-speed spindle) Working range square max.: 60 mm Working range flat max.: 40 x 80 mm Working range round: 2 - 70 mm Feed length 5 - 2000 mm Feed speed max. 600 mm/sec Weight (saw)approx.: 1200 kg (magazine)approx.: 600 kg Dimensions LxWxH (saw)approx.: 3300 mm x 1000 mm x 2000mm (magazine)approx.: 3900mm x 1500mm x 1300mm Installation area LxW 4900mm x 2000mm The machine will be overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 - New electrical components - New pneumatic lines - Overhauled pneumatic components - New valve terminal - Overhaul of the suction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the loading magazine The machine is additionally equipped with - a belt magazine for 4m bars (optional 6m) - AC servo-controlled material feed unit - Splitting extension (for a high-quality cutting surface without return marks) Due to its equipment and design, the machine is suitable for mass cutting of steel in the high-precision tolerance range. The sawing machine is currently in pre-overhaul status and can therefore only be viewed in its original condition without function. After a general overhaul (retrofit), the system is in mint condition, which is guaranteed by our company. The delivery time is approx. 4 months. Kwedpfxeuizi Ij Abcew Guarantee: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Flat magazine extension 6m - High-speed spindle - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Manufacturer Kaltenbach Type RKS 451 NA Overhaul year 2024 Saw blade VHM / HSS 450 mm Drive power saw motor 5,5 KW Speed infinitely variable 10 - 60 min-1 Cutting speed saw blade (450 mm) 15-75 m/min Saw height control infinitely variable fully electronic 5 Working area square 90° max.: 140 x 140 mm Working area flat 90° max.: 240 x 70 mm Working area round 90° max.: 150 mm Feed length 5-9999 mm Kodpfx Asuiy Trjbcjww Feed speed AC servo max.: 500 mm/s Weight (saw)approx.: 2100 kg Dimensions LxWxH (saw)approx.: 2500mm x 1300mm x 2100mm Footprint LxW 2500mm x 1300mm Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic height control - Frequency-controlled main saw motor - Hydraulic material clamping Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extra-long material feed device (2000mm) for efficient sawing of large cut-off lengths - Chain magazine for 6m of material - Removal gripper system for sorting the cut-off pieces - Delivery and installation on your premises - Training of your employees

Condition: like new (used), Year of construction: 2024, Saw blade solid carbide / HSS: max. 425 mm Drive power: - Two-stage with chain: 1.7/2.6 kW, - Two-stage with belt pulley: 3.7/4.5 kW Cutting speed saw blade (400 mm): - two-stage with chain: 10/20 m/min, 13/26 m/min, 15/30 m/min - two-stage with belt pulley: 20/40 m/min, 30/60 m/min Infinitely variable saw speed control fully electronic Working range square 90° max.:120 x 120 mm 45° max: Working range flat: 90° max.:230 x 80 mm 45° max: Working range round: 90° max.: 140 mm 45° max: Feed length single stroke: 5-1000 mm Multiple stroke: 5-9999 mm Feed speed AC servo max: 500 mm/s Weight(saw)approx.:3100 kg Dimensions LxWxH( saw)approx.:2500mm x 1300mm x 2100mm Footprint LxW: 2500mm x 1300mm Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The HMI interface for controlling the machine ensures simple and problem-free operation of the system. Due to the design of the sawing system, it is possible to realize a very precise length tolerance. The machine is generally overhauled in our company at the customer's request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - Maintenance or replacement of all hydraulic cylinders and valve terminals - Optimization and overhaul of the cooling system - Replacement of general wear parts - Overhaul of the machine body The machine also features - Fully automatic feed - Fully automatic miter adjustment +/- 60° Kwodpfxeuiy R Rs Abcsw Warranty: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Sink scraper - Extended feed unit 2000mm - Chain magazine for 6m of material - Removal gripper system for sorting the cut-off pieces - Removal gripper system for sorting the cut-off pieces and realizing a multiple recut at the end of the workpiece - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhaul year: 2024 Saw blade max. carbide 500/550 mm Drive power saw motor: 6 KW Saw motor speed in 6 stages: 2400- 3200 min-1 Saw blade cutting speed (500-550 mm): 3800 - 5500 m/min Saw blade feed steplessly adjustable 0-40 mm/s Saw height control infinitely adjustable fully electronic Working area square 90° max.: 160 x 160 mm Working area flat 90° max.: 380 x 60 mm Working area round: 90° max.:165 mm Feed length: 10-9999 mm Feed speed AC servo max. 400 mm/s Compressed air connection on site 6 bar Weight(saw)approx.:2850 kg Dimensions LxWxH(saw)approx.:2900mm x 1725mm x 2200mm Footprint LxW 2900mm x 1725mm The machine is in mint condition, both technically and visually, after a completed retrofit. Kwodpfeuiy Rqex Abcjw Thanks to its equipment and design, the machine can be used very efficiently for a wide range of applications. The positioning system ensures simple and very profitable operation of the machine. Thanks to the powerful motor, short cycle times can be achieved even when sawing thick-walled profiles or solid materials. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operating panel - Replacement of the ball screw - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive (optional) - New electrical components - New pneumatic lines - Maintenance or replacement of all hydraulic cylinders and valve terminals - Overhaul of the extraction system - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the soundproof cabin The machine also has - Soundproof cabin - Zero point adjustment (manual) Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Chain magazine for 4/6m materials - Splitting extension (for a high-quality cut surface without return marks) - Horizontal clamping saw line - Cut stop in material feed unit - Reinforced motor 11 KW - Roller conveyors - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) Kwjdpfx Asuiy Nysbcsw - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Kedpsuiy Ngefx Abcoww Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Condition: repair required (used), Year of construction: 2024, Overhauled: 2024 PLC control: Siemens S7 Saw blade 60 - 250 mm Motor power 1.5 KW Saw blade feed 0-20 mm/min Cutting speed: 15 - 170 m/min (steel) 630 - 1885 m/min (non-ferrous metal) Max. working area: 70x40 mm (steel) Working area max.: 60x40 mm (non-ferrous metal) Working range round: 5 - 70 mm (steel) Working range round: 5 - 50 mm (non-ferrous metal) Feed length 5 - 500 mm 5-9999 (multiple stroke) Feed speed max. 500 mm/sec Weight (saw)approx.: 610 kg Dimensions LxWxH (saw)approx.:2500mm x 1000mm x 2000mm The machine will be overhauled in our company on customer request. Among other things, the following points will be renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - Replacement of the pneumatic feed or replacement of the ball screw spindle - Replacement of servo motor and servo inverter - Replacement of the frequency converter for the main saw drive - New electronic components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Optimization of the suction concept - Maintenance of the central and minimum lubrication system - Replacement of general wear parts - Overhaul of the machine body The machine also has: - Minimum lubrication for optimum sawing quality Due to its equipment and design, the machine is suitable for mass cutting of steel in the high-precision tolerance range. Guarantee: Unless otherwise agreed, we guarantee our machines for 6 months on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Ksdpfouiy I Aex Abcsww Optional: - Conversion of the sawing unit to a gearless main drive for sawing non-ferrous metals and plastic materials (speed 1000 - 3000/1min.). - Feed unit 1000mm - Feed unit 2000mm - Screw magazine 4m - Screw magazine 6m - Servo-controlled material feed - Servo-controlled saw feed - Conversion to prismatic jaws (60°) for mass clamping of round materials - Discharge system - Delivery and installation on your premises - Training of your employees

Condition: like new (used), Year of construction: 2024, Overhauled: 2024 Year of manufacture: 1994-2000 Saw blade 560 mm Motor power 6,5 / 8,0 KW Speed 1500/3000 min-1 Cutting speed 2100 - 4200 m/min Saw height control: electronic Working range square max.: 170x170 mm Working range flat max.: 300x150 mm Working range round max.: 200 mm Saw feed 0 - 40 mm/s infinitely adjustable Cutting length 5-950 mm (9999 mm multiple stroke) Feed speed max. 500 mm/s Weight approx. 1900 kg Dimensions LxWxH 2200mm x2700mm x1950mm The machine is in mint condition, both technically and visually, following a completed retrofit. Due to its equipment and design, the machine can be used very efficiently for a wide range of applications. The programmed HMI control system ensures simple and very profitable operation of the machine. The soundproof cabin reduces noise emissions to a minimum. The machine is generally overhauled in our company at the customer's request. Among other things the following points will be renewed: Kwsdpfeuiy Hrjx Abcow - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI user interface - Replacement of the ball screw - Replacement of servo motor and servo inverter - New electrical components - New pneumatic lines - New pneumatic components - Overhaul or replacement of all pneumatic cylinders - Renewal of the valve terminal - Optimization of extraction performance - Overhaul of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab The machine also has: - Soundproof cabin - Splitting extension (for a high-quality cutting surface without return marks) - Height control fully electronic Warranty: Unless otherwise agreed, we provide a 6-month guarantee on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the guarantee. Optional: - Mass clamping device for parallel sawing of several workpieces - Flat magazine for automatic feeding of up to 6 m long primary materials - Roller conveyors for primary material - Reinforced motor 18.0 KW (frequency-controlled) - Delivery and installation on your premises - Training of your employees

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 580 kg, Precision aluminum circular sawing machine VELOX 350 VA-MPS fully automatic hydropneumatic machine For saw blades up to 350 mm Ø, miter left + right 45° and bevel cuts up to 45° left + right. Cutting range: - 90° 120mm round, 105mm square, 200x80mm flat - 45°L 65mm round, 60mm square, 180x50mm flat - 45°R115mm round, 100mm square, 150x80mm flat Standard equipment: - State-of-the-art micro-processor control with multifunctional display - Safety package with the following functions: 1. minimum input pressure monitoring 2. vice monitoring/material clamping - Hydro-pneumatic control of the saw head - Pneumatic double clamping device - Pneumatic vertical clamping device - Electro-pneumatic material feed unit - Nonius for fine length adjustment - Integrated coolant spraying device - Connecting piece for chip extraction system Speed 3600 min-1 Kwedpfsrpiu Djx Abcjw

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: SÇ 4000 S PLUS Full Otomatik Servo Motorlu Çift Köşe Alüminyum Pvc Kesim Makinası, - It is a fully automatic controlled cutting machine designed to cut PVC and Aluminum profiles straight or angled with a double head Ø600 mm saw. - Hydro - Pneumatic Hydro - check controlled saw movement Kedpfx Aeramy Tsbcjww - Cutting Accuracy +/- 0.1 mm - High precision thanks to backlash-free gearbox - Automatically adjustable to two inward angles at 90 and 45 degrees - 15" Windows-based industrial PC - Diamond saw 2 x Ø600 mm - Servo motor motion system - 21.5 cm saw exit distance and 70 mm x 3 profile cutting capacity - Hydro-check saw speed adjustment - 9.5 meter cutting feature - 90 degree wedge slicing feature - Multi-language support - Conveyor profile support unit - Motion-sensitive support arm - Profile support unit between cutting heads - Spray saw cooling system - 2 vertical clamps - 4 horizontal clamps OPTION - Barcode printer - Cutting list transfer via USB Memory