Bkm Teknoloji

Condition: used, Year of construction: 2007, Technical Specifications – STAMA MC 334 Manufacturer: STAMA Maschinenfabrik Model: MC 334 Year of Manufacture: 2007 Kjdpfx Aasznc I Defjlw Machine No.: KMM 334 2052 Electrical Data Connection Voltage: 400 V / 3 Phase / 50 Hz Nominal Current: 65 A Recommended Fuse: 3 × 80 A Minimum Connection Cable Cross Section: 35 mm² Total Connected Load: 125 kVA Total Power Requirement: 110 kW Spindle Tool Interface: HSK 63 Spindle Bearing Diameter: 65 mm Spindle Arrangement: a = 400 mm Maximum Torque: 200 Nm (20% duty cycle) Spindle Speed: 20 – 15,000 rpm Travels X-Axis: approx. 900 mm Y-Axis: approx. 900 mm Z-Axis: approx. 1,125 mm Feed Rates Feed Rate (X/Y/Z): 1 – 10,000 mm/min Rapid Traverse: X-Axis: 60 m/min Y-Axis: 60 m/min Z-Axis: 60 m/min Maximum Feed Force X-Axis: 7,000 N Y-Axis: 7,000 N Z-Axis: 8,000 N Tool Magazine Magazine Capacity: 90 tools Tool Clamping Force: 8,000 N Maximum Tool Diameter: 160 mm Maximum Tool Length: 350 mm Tool Data Tool Dimensions: Standard Tool Weight: 1.8 kg Maximum Tool Weight: 12 kg (with every other pocket free) Maximum Tool Diameter: 300 mm Machining Capacity Maximum Milling Capacity: 600 cm³ Maximum Drilling Diameter: Ø40 mm Maximum Thread Size: M30 Machine Dimensions Length: 2,500 mm Width: 2,060 mm Height: 3,300 mm

Condition: refurbished (used), functionality: fully functional, 5-axis HSC milling machine Röders RXP500DS with linear direct drives in all axes and torque drives in the rotary axes. The machine will be completely overhauled, inspected, and measured in our workshop. The machine will once again meet new machine tolerances! Travel ranges: X450mm, Y400mm, Z240mm Distance spindle/table: approx. 315mm - Linear direct drives in all axes - wear-free - Tool changer, 42-position - Cooling unit for drives, milling spindle, and control cabinet - Measuring laser for fully automatic measurement of milling tools (length/diameter/contour/taper angle) as well as wear monitoring including tool cleaning before measurement - Handbox - Remote maintenance - Automatic 3D probe including calibration sphere in the tool changer - Minimum quantity lubrication - Emulsion cooling - Spindle HSK40E with max. 42,000 rpm Kljdpfx Aozmgt Ijafew - Spindle length compensation - Zero-point clamping system EROWA integrated into the machine table - Manual chuck control - Automation RC2 pallet changer for 45 Erowa ITS50 pallets - ideal for the production of electrodes An inspection of the machine in operational condition is possible at any time. You can also find information about the type and scope of our overhauled machines on our website or on our Hüttmann YouTube channel.

Condition: good (used), Year of construction: 2008, QUASER Type MV154 PL / 12 Construction Year 2008 Description CNC and Control: Heidenhain iTNC 530 Axes: X: 1020 mm Y: 500 mm Z: 500 mm Table size: 1,200 x 500 mm Maximum table load: 500 kg System: Cone and face contact Taper: BT40 Big-Plus Kjdpezl E Tdofx Aafslw Spindle: BIG-PLUS BT40 Spindle taper: SK40 / ISO 40 Spindle speed: 40 – 12,000 rpm Spindle motor power: 18.5 kW Working feed rate: 0 – 20,000 mm/min Rapid traverse: 40 m/min Tool magazine: 30 positions Automatic tool changer Through-spindle coolant (IKZ) Chip conveyor Programming: Conversational ISO Interface: Tool management Axis monitoring Simulation and execution Cooling System: External tank Grundfos pump Complete circuit Approx. dimensions: 2470 x 2540 x 2830 mm Approximate weight: 6.850 kg

Condition: used, Year of construction: 2004, emco VMC 300 D - CNC Milling Machine - SIEMENS Sinumerik 810D CNC Control - Tool magazine for 12 tools - CNC dividing head / 4th axis - Coolant system - 41,300 operating hours - Year of manufacture: 2004 Technical data Working area: - Travel in X-axis: 420 mm - Travel in Y-axis: 330 mm - Usable travel in Z-axis: 240 mm - Workpiece dimensions L x W x H: 400 x 300 x 190 mm - Distance between spindle nose/table surface: 210 - 450 mm Milling table: - Clamping area L x W: 850 x 325 mm - Max. table load: 150 kg - 3 T-slots according to DIN 650: 14 mm - T-slot spacing: 100 mm Milling spindle: - AC motor, power (100/60% duty cycle): 9 / 11 kW - Speed range (continuously variable): 0 - 5000 rpm - Sound pressure level at 5000 rpm: 72 dB A - Max. torque: 100 Nm Machining performance: - Milling performance in steel (16 Mn Cr5 - 790 N/mm²): 220 cm³/min - Drilling performance in steel: ø 25 mm - Thread cutting performance in steel: M20 Feed drive (AC motor with individual drive + ball screw): - Feed rate in X/Y/Z axes: 0.01 - 12000 mm/min - Rapid traverse in X/Y/Z axes: 12 m/min - Feed force in X/Y axes: 6000 N - Feed force in Z axis: 8800 N - Resolution: 0.001 mm - Positioning accuracy X/Y/Z: 0.004 mm Tool system: - Tool magazine: Drum with direction logic - Number of tool stations: 12 - Insertion force: 6000 N - Max. permissible tool weight: 5 kg - Total permissible tool weight in magazine: approx. 36 kg - Max. tool diameter: 100 mm - Max. tool length: 220 mm - Chip-to-chip time according to VDI 2852 T1/T2/T3: 8.9 / 7.0 / 7.0 s - Tool change time (without traverse movements) T1/T2/T3: 5.8 / 3.9 / 3.9 s Lubrication system: - Guide rails & ball screw: automatic central oil lubrication - Main spindle bearing: grease lubrication Coolant system: - Tank capacity: 100 l - Max. flow rate: 10 l/min - Max. delivery pressure at 50 Hz: 3.7 bar - Coolant supply: 4 nozzles, external Electrical connection: - Power supply: 3/PE 400 V 50/60 Hz - Connected load: 15 kVA Pneumatic connection: - System pressure: 5 - 10 bar - Required minimum air flow (related to 1 bar): 750 l/min - Average air consumption (related to 1 bar): 180 l/min Dimensions: Kodjzl D Awjpfx Aafjlw - Dimensions W x H x D: 2300 x 2450 x 2400 mm - Weight: approx. 2900 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 12647, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 36 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, nominal power (apparent): 15 kVA, controller manufacturer: Heidenhain, controller model: TNC 620, workpiece weight (max.): 400 kg, total height: 2,350 mm, total length: 2,250 mm, total width: 1,850 mm, table width: 320 mm, table length: 600 mm, table load: 300 kg, overall weight: 3,000 kg, spindle speed (max.): 12,000 rpm, operating hours of spindle: 4,770 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 16, tool weight: 6,000 g, input voltage: 400 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, LILIAN SVM-50 4-axis machining center Year of manufacture: 2010 Serial No. 12647 Travel distances (X x Y x Z): 510 x 410 x 460 mm with CNC rotary axis = 4th axis, with pneumatic clamping, 3-jaw chuck, counter bearing and electric hoist for lifting Control system: Heidenhain TNC620 including option for probing cycles and thread cutting without compensation chuck RS232 / RJ45 interfaces Dual-arm tool changer with 16 tools Direct drive spindle, oil-cooled, 12000 rpm SK40 DIN 69871 taper Rapid traverse X+Y+Z: 36 m/min Heidenhain glass scales X+Y+Z Heidenhain TS 440 probing system Handwheel Cabin with sliding door Work area lighting Kodezlcldepfx Aafslw Coolant system Oil mist extraction Automatic central lubrication 3-color alarm and status indicator 400V/50Hz, 15 KVA Compressed air requirement: 6 bar Weight: 3000 kg Dimensions W x D x H: 1850 x 2250 x 2350 mm Control system operating time: 15120 hours Spindle operating time: 4770 hours Optional: Various clamping tools SK40 (milling chuck, threading chuck, drilling chuck, shrink-fit chucks, milling cutter holders, etc.) Allmatic machine vise

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, x-axis travel 520 mm y-axis travel 360 mm z-axis travel 350 mm Spindle speed 12,000 rpm Spindle-to-base distance min./max. 150 - 500 mm Table surface 650 x 375 mm Tool weight max. 2.8 kg Table load 2 - 200 kg Control system Fanuc i Machine weight approx. 5,200 kg Dimensions 3,230 x 1,620 x 2,507 mm Equipment/Accessories: - Rigid tapping – thread drilling without a compensation chuck - 14-position tool magazine (T3600D) - Speed range 12,000 rpm - Spindle speed and power display - Telescopic covers in the X, Y, and Z axes Ksdpfxjzk D Dfs Aafelw - Rapid traverse rates in the X, Y, and Z axes - Door safety switch - 3-color indicator light - Work area lighting - Coolant supply from the 200 l tank via adjustable coolant nozzles on the spindle nose - usable table load of 2 x 200 kg - 21-position tool magazine - Internal cooling - Machine cover, closed top / top cover - Oil skimmer - Pneumatic clamping, 1 pair per pallet - Automatic work area door with safety strip - Coolant system, delivery pressure 4.5 bar Operating hours: 14,317 h

Condition: used, Year of construction: 2012, FANUC Robodrill Kljdpfxozktvkj Aafjw Fanuc 31i control X 500mm Y 400mm Z 330mm Tool magazine with 21 positions for BT30 tools BT30 spindle taper Spindle speed: 24,000 rpm Lehmann EA510 5-axis rotary table Blum part probe Height probe on the table

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Siemens control system, Kjdpfx Aszkk Nueafjlw 12-position tool changer, BT40, Travel range X500 - Y300mm, Renishaw touch probe, Accessories.

Condition: good (used), Year of construction: 2005, Parts shown by hand not come. Klodozkkgmspfx Aafsw

Condition: good (used), Year of construction: 2001, functionality: fully functional, Vertical machining center, operator-attended machine with 3 axes Manufacturer: UNITECH Germany Model: CFS 2 Year of manufacture: 2001 Control system: Heidenhain Travel range: X Y Z = 1500 x 300 x 300 Table size: 1800 x 350 mm Spindle power and speeds: 6000 rpm Klsdpfxozkhlys Aafjw Tool holder: SK 40 Equipment: with internal spindle cooling Chip conveyor Design: Operator-attended machine

Condition: used, machine/vehicle number: J500111T, Hardinge Bridgeport Interact T450P Vertical Machining Centre Siemens 810D CNC Control Table Size: 500 × 400mm X-Axis Travel: 450mm Y-Axis Travel: 400mm Z-Axis Travel: 450mm Spindle Taper: BT40 Spindle Speed: 8,000 rpm Kjdpfx Aaozkalfefolw Spindle Motor: 7.5/11 kW AC Spindle Motor ATC 20 Station Carousel Machine Weight: 2,500 kg Supplied with: 20 Station Automatic Tool Changer Electronic Handwheel (MPG) Coolant System Worklight Fully Enclosed Guarding Automatic Lubrication Interlocked Safety Door Three Colour Machine Status Beacon For Sale with Jet Machinery Ltd Jet Machinery Stock No: 79208 Machine Serial Number: J500111T Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 179, travel distance X-axis: 510 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: MSC 803, rotational speed (max.): 8,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 510 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table size: 750 x 550 mm Spindle speed range: 8,000 rpm Spindle mounting: BT40 MACHINE DETAILS Control system: MSC 803 Weight: 4,500 kg EQUIPMENT 25-position tool changer Coolant system Ksdpfx Aozi D E Toafolw

Condition: good (used), Year of construction: 2003, functionality: fully functional, Equipment: chip conveyor, I am selling a FAMUP MCL 120 E machine due to lack of space. Klsdpszi Ddcofx Aafjw

Condition: used, Year of construction: 2005, machine/vehicle number: 107.32.99.158, travel distance X-axis: 530 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 450 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 12,000 rpm, Re-auction due to buyer’s payment default! The machine spindle was replaced in July 2025! TECHNICAL DETAILS Travel range X-axis: 530 mm Travel range Y-axis: 450 mm Travel range Z-axis: 450 mm Rotary table Table diameter: 400 mm Table load capacity: 200 kg Swivel range: degrees Swivel speed: 20 rpm Rotational speed: 30 rpm Tool holder: SK40 Maximum speed: 12,000 rpm Recommended maximum working feed rate: 15 m/min Rapid traverse speed: 22 m/min Feed force X and Y/Z: 5,000 N Magazine capacity: 30 Maximum tool diameter: 90 mm Maximum tool length: 250 mm (manual 350 mm) Maximum tool weight: 6 kg MACHINE DETAILS Control system: Heidenhain iTNC 530 with digital control Positional tolerance according to DIN/ISO 230-2/97: 0.008 mm Kjdpfx Ajziz Nceafolw Machine weight: 6,500 kg EQUIPMENT RENISHAW MP 12 measuring probe Blum tool monitoring system

Condition: ready for operation (used), Year of construction: 1995, travel distance X-axis: 560 mm, travel distance Y-axis: 380 mm, travel distance Z-axis: 520 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 6,000 rpm, spindle motor power: 7,500 W, number of axes: 3, This 3-axis Bridgeport VMC 560/22 was manufactured in 1995. It features an X-axis travel of 560 mm, Y-axis travel of 380 mm, and Z-axis travel of 520 mm. The machine is equipped with a spindle speed of 6,000 rpm and a tool magazine with 22 positions. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 560/22 vertical machining centre we have for sale. Contact us for further details. Klsdpfxjzizi As Aafjw Tool taper: BT40Rapid Traverse: X/Y: 20 m/min; Z: 16 m/min • Outer length: Approx. 840 mm • Outer width: 360 mm • Table load: 500 kg • Number of tool slots: 22 • Tool taper: BT40 • Max tool length: 250 mm • Maximum tool diameter (adjacent pocket empty): 130 mm • Maximum tool weight: 6 kg

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The Matsuura MAM72-25V belongs to the well-known MAM72 series and was specifically developed for automated and unmanned 5-axis machining. It is ideally suited for complex workpieces with the highest requirements for precision, process reliability, and cost-effectiveness. The machine combines a compact machine concept with automatic pallet change, a large tool magazine, and simultaneous 5-axis machining. This makes it ideal for single parts, small series, and series production. The MAM72 series is particularly well-established in the following industries: Aerospace Kjdpjziy Rrsfx Aafjlw Medical technology Precision engineering Tool and die making Mold making Mechanical engineering Automotive Precision technology The MAM72 series was developed by Matsuura specifically for long, unmanned operation and offers high flexibility with a small footprint. Highlights: ✔ Simultaneous 5-axis machining ✔ Automatic pallet change ✔ Ideal for unmanned manufacturing ✔ Very high precision ✔ Direct drive of the rotary axes ✔ Fanuc control ✔ High process reliability ✔ Short tool change times ✔ Compact footprint ✔ Ideal for multi-machine operation ✔ Excellent for complex components ✔ High repeatability

Condition: good (used), Year of construction: 2008, Vertical machining center Machine type: Ingersoll OPS 550 Control: Andronic 2060 Year: 2008 SPECIFICATIONS Travel X-Axis: 550 mm Y-Axis: 400 mm Z-Axis: 400 mm Rapid motion: (X/Y/Z): 60 m/min. Panning head Max. revolution: 0 - 42.000 rpm Spindle power: 15 / 17 kW Tool: HSK 40 E Tool capacity: 32 Table size: 650 x 500 mm Max. Table Load: 500 kg Req. space (LxBxH): 2,58 x 1,9 x 2,26 m Machine weight: 7.200 kg Klodpsziy Dxsfx Aafow Equipment Caliper Electronical handwheel Erowa Nullpunktspannsystem

Condition: excellent (used), Year of construction: 2022, operating hours: 1,316 h, DMG MORI M1 Pro (12,000 rpm version). In very good condition; the machine can be connected and tested. Kedpfxezivv Re Aafolw

Condition: excellent (used), Year of construction: 2008, HAAS MINI MILL HE CNC machining center Year: 2008 Klsdpfxszivtps Aafsw CNC control: HAAS Travels in the X/Y/Z axis: 406/305/254 mm Work table dimensions (L x W): 914 x 305 mm Maximum spindle rotational speed: 6000 rpm Spindle motor power: 6 kW Tool magazine capacity: 10-positions Tool holder type: SK 40 Dimensions (L x W x H): 2000 x 2000 x 2500 mm Weight of machine: 2200 kg Accessories/options: - tool holders, SK40 - precision vices, pneumatic operated - Mahr taster Under power in our warehouse!

Condition: good (used), functionality: fully functional, pallet model with 4-axis rotary table, 2 units year of manufacture: 1998, weight: 2350 kg X 350 mm Y 250 mm Z 350 mm axis 4 tool changer, 26 positions Kledpjziclljfx Aafew Twin Pallet

Condition: like new (used), Year of construction: 2012, functionality: fully functional, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, Vertical machining center Manufacturer: Fehlmann (Switzerland) Type: Picomax 56 TOP Machine No.: 14212322 Year of manufacture: 2012 Control system: Heidenhain 620 Axes: 3 Travel distances X: 500 mm Y: 400 mm Z: 400 mm Klsdpfx Ajzia H Tjafjw Tool changer: 30 positions Spindle speed: 12,000 rpm Drive power: 100% ED / 40% ED 7.1 kW / 9.5 kW Weight approx.: 3300 kg - Heidenhain measuring probe - Heidenhain tool measuring probe - Various tool holders - Like new condition - Program runtime: 1980 hours Errors and prior sale excepted.

Condition: used, TECHNICAL DETAILS - Number of axes : 4 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] Kjdpfx Aaozhxxlefelw - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Type of divisor : 4e axe CNC intégré * manufacturer : Fanuc DDRT260iB - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 Kledpozhxxfefx Aafjw - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of hours under power : 41801 [h] - Number of working hours : 10615 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank Kledpfszhxw Ujx Aafew * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] Kledpszhxw Iefx Aafsw - Machine height : 2346 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of hours under power : 41943 [h] - Number of working hours : 10594 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE