Kosmos Energeia
Kosmos Energeia from Kalamaria, Thessaloniki
Our company offers quality used machinery and industrial equipment from factories and workshops mainly in Greece. We provide also dismantling, packaging and rigging/loading of the machines and also installation and commissioning in the working location.
We would be pleased to receive requests for specific machine and equipment. More information at : .
Kosmos Energeia
Aristotelous 3b
55133 Kalamaria, Thessaloniki
Greece
Current offers from similar dealers
Success:
Your message has been sent.
Listing
Kraków
6,080 km
Busch CB 0250 B Vacuum Pump
BuschCB 0250 B
BuschCB 0250 B
Call
Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Technical specifications:
Product number
CB 0250 B
Year of manufacture
2006
Engine power 7.5 kW
Capacity 250 m3/h
MAX vacuum 2 mbar
Ibedj Ak Dfrepfx Amysd
Noise level 74 dB
Rotational speed 1500 rpm
Weight 250 kg
Dimensions [h x l x w] 1011 x 581 x 410 mm
The pump achieves a vacuum of 2 mbar in the large section and 4 mbar in the small section.
Pump has undergone oil service.
New oil filter and oil separators.
Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps.
The most important parameters of vacuum pumps are:
final pressure (the lowest pressure that can be achieved with such a pump),
pumping speed and the dependence of this speed on pressure,
capacity (usually measured in m3 of gas pumped per unit of time).
Success:
Your message has been sent.
Listing
Kraków
6,080 km
Busch WP 1250 D 2V1 ZZXX Vacuum Pump
BuschWP 1250 D
BuschWP 1250 D
Call
Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical specifications:
Product number
WP 1250 D 2V1 ZZXX
Year of manufacture
2007
Capacity 1250 m3/h
Maximum vacuum 0.3 mbar
More information available upon phone contact
Iedpo Ak Dfkofx Amyobd
The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower.
The unit has undergone a major overhaul and is ready for operation.
New seals and bearings, new oil.
Achieves a vacuum of 0.3 mbar (a reading of 3.6 x 10^-1 on the sensor indicates a vacuum of 0.36 mbar).
Success:
Your message has been sent.
Listing
Đakovo
6,121 km
Coil line
4-High Cold Rolling Mill- 200/650 × 650
4-High Cold Rolling Mill- 200/650 × 650
Call
Condition: ready for operation (used), functionality: unexamined, input frequency: 60 Hz, input voltage: 440 V, MACHINE DESCRIPTION
4-High Cold Rolling Mill designed for cold rolling of aluminium alloys and copper.
The mill is suitable for processing soft-annealed, tightly wound and pickled coils, offering precise thickness reduction and controlled rolling operations.
The equipment features a work roll drive system, mechanical screwdown adjustment, hydraulic roll bending, roll balancing, tension reels, entry and exit guiding equipment, thickness measurement and an emulsion-based coolant system.
1. BASIC MATERIAL SPECIFICATIONS
Machine type: 4-High Cold Rolling Mill
Mill designation: 200/650 × 650 mm
Suitable materials: Aluminium alloys A1100, A3003, A5002 and copper (Cu)
Material condition: Soft annealed, tightly wound coil and pickled
Maximum tensile strength: 85 kg/mm² (annealed)
Material thickness range: 0.05–3.0 mm
Material width: 400–600 mm
Coil inner diameter: Approx. 508 mm
Maximum coil outer diameter: 1,500 mm
Ijdo Ak Dfgjpfx Amyobd
Maximum coil weight: 5,000 kg
2. ROLLING MILL SPECIFICATIONS
Rolling mill configuration: 4-High (4HI)
Work roll diameter: 200 mm (specified range: 200–180 mm)
Backup roll diameter: 650 mm (specified range: 650–630 mm)
Roll barrel length: 650 mm
Additional roll dimensions stated: 720 mm / Ø200 × 740 mm (work roll); 720 mm (backup roll)
Rolling speed: 300 m/min (Step 1)
Gear transmission ratio: 3.5:1
Drive configuration: Work roll drive
3. MOTOR SPECIFICATIONS
Main mill drive: 300 kW; motor speed 0–1,500 / 1,500 rpm
Right tension reel: 110 kW; motor speed 0–500 / 2,000 rpm
Left tension reel: 90 kW; motor speed 0–400 / 1,600 rpm
4. SCREWDOWN SYSTEM
Mechanical screwdown system
AC motor drive: 7.5 kW
Motor voltage: 440 V
Encoder sensor included
Maximum separating force: 300 tons
5. WORK ROLL BENDING SYSTEM
Hydraulic roll bending device
Hydraulic pressure specification: 200 kg/cm²
Integrated roll balancing system
6. ENTRY GUIDE EQUIPMENT
Deflector roll, hold-down roll, tension pad, side guide and coolant oil spray equipment.
7. EXIT GUIDE EQUIPMENT
Air spray system, anti-rust deoiling pad, thickness gauge and deflector roll.
Thickness gauge specification: 1000:3 – 4.5 t (as stated in the original documentation).
8. ROLL ASSEMBLY
Roll balancing system, roll bending equipment and drum assemblies.
9. TENSION REEL SPECIFICATIONS
Right tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 110 kW
Tension capacity: 7 tons
Left tension reel:
Drum diameter: 508–700 mm
Outer diameter: 1,200 mm
DC motor power: 90 kW
Tension capacity: 7 tons
10. COOLANT SYSTEM
Emulsion oil type cooling system, coolant dirty tank and sump pump.
11. UTILITY REQUIREMENTS
Electrical power: 440 V, three-phase supply, 60 Hz
Specified power requirement: 500 kW
General hydraulic unit: tank capacity 400 litres; operating pressure specification 100 kg/cm²
Compressed air: continuous compressed air supply specified as 7 m³ in the original documentation (time basis not stated).
12. MAIN FEATURES
4-High rolling mill configuration
Suitable for aluminium alloys and copper
Material thickness range from 0.05 to 3.0 mm
Maximum processing width of 600 mm
Maximum coil weight of 5,000 kg
Rolling speed of 300 m/min
300 kW main mill motor
Mechanical screwdown system
Hydraulic work roll bending
Roll balancing system
Entry and exit guiding equipment
Thickness measurement equipment
Right and left tension reels
Emulsion oil coolant system
Success:
Your message has been sent.
Listing
Đakovo
6,121 km
Wood shaper
CMSLay 3000 Complete woodworking line
CMSLay 3000 Complete woodworking line
Call
Condition: ready for operation (used), Year of construction: 2010, functionality: unexamined, total length: 17,600 mm, total width: 9,900 mm, Manufacturer: CMS
Model: Lay 3000
Isdpfxs Ak Dd He Amyjbd
Year of manufacture: 2010
Overall dimensions (length x width): 17.60 x 9.90 m (17,600 x 9,900 mm).
Working dimensions (length x width x height): 10.00 x 3.50 x 1.50 m (10,000 x 3,500 x 1,500 mm).
The photographs show the machinery and examples of wooden house construction.
Price on request.
Success:
Your message has been sent.
Listing
Đakovo
6,121 km
Meat processing machine
BraibantiSasib 4500kg/h
BraibantiSasib 4500kg/h
Call
Condition: excellent (used), Year of construction: 2000, functionality: fully functional, total length: 54,000 mm, total width: 5,200 mm, total height: 6,800 mm, - 3-head press for 520 mm dies.
- 3 screws 190 mm.
- main tank, plus vacuum tank
- pre-drying dryer, 3 tier
- first dryer, 15 tier, 8 modules
- final dryer, 13 tier, 12 modules
- newly built Buhler single-pass cooler.
The line produces regularly and constant maintenance activities have been carried out, including the recent replacement of the roller shutters in both dryers.
These are the dimensions of the line:
Length 54 m.
Ibjdpe Ak Dd Ajfx Amyod
Width 5,20 m.
Height 6,80 m.
Success:
Your message has been sent.
Listing
Ciorogarla, Ilfov
5,523 km
Reefer semitrailer
Schmitz CargobullReefer Standard
Schmitz CargobullReefer Standard
Call
Condition: used, empty load weight: 8,928 kg, axle configuration: 3 axles, first registration: 08/2022, loading space length: 13,403 mm, loading space width: 2,460 mm, loading space height: 2,600 mm, loading space volume: 85 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 7,600 mm, color: white, Year of construction: 2022, Equipment: ABS, Tare weight: 8928kg, Loading area (L W H): 13,403 mm x 2,460 mm x 2,600 mmTyre size: 385/65 R22.5, Loading area volume: 85 m³, 1st axle: , 2nd axle: , 3rd axle: , Air suspension, Rear underrun, Lift axle, Pallet box, Electronic Brake System EBS, Temperature recorder, 1x15 and 2x7 pin plug, Antispray, Please find an overview of all vehicles available on our website . Finance required? We offer individual financing solutions, full service contracts and telematic-services. We would be glad to advise you personally.
Isdpo Ak Ddxsfx Amyjbd
Success:
Your message has been sent.
Listing
Austria
6,437 km
2015 LVD Electra FL-3015 4 KW
LVDElectra FL-3015 4 KW
LVDElectra FL-3015 4 KW
Call
Condition: used, Year of construction: 2015, For sale: LVD Electra FL-3015 Fiber Laser Cutting Machine in excellent condition.
This machine has been fully overhauled in 2026, features flawless paintwork, and is ready for immediate production.
Ideal for sheet metal processors looking for a reliable and proven fiber laser system at a competitive investment level.
Key Features
Manufacturer: LVD
Model: Electra FL-3015
Year of manufacture: 2015
Laser source: Rofin Fiber Laser 4 kW
Condition: Very good / fully overhauled in 2026
Technical Specifications
Sheet size: 3,000 x 1,500 mm
Axis travel:
- X: 3,080 mm
- Y: 1,555 mm
Power supply: 400V / 50Hz
Machine dimensions: 11,000 x 2,250 mm
Weight: 13,000 kg
Operating hours: 12,348 h
Laser hours: 7,283 h
Please Note:
The information was obtained to the best of our abilities and - where possible - from the manufacturers.
It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms.
Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken.
Ibsds Ak Ddujpfx Amyod
We advise you to check any vital details!
Manufacturer: LVD
Machine Type: Electra FL-3015
Year of Manufacture: 2015
Laser source: Rofin Fiber Laser 4 kW
Operating hours: 12348
Success:
Your message has been sent.
Listing
Heijen
7,071 km
2014 Niftylift HR21 Hybrid 4x4, Hoogwerker 21 meter, Diesel + Accu, Bi-energy
NiftyliftHR21 Hybrid 4x4, Hoogwerker 21 meter, Diesel + ...
NiftyliftHR21 Hybrid 4x4, Hoogwerker 21 meter, Diesel + ...
Call
Condition: used, Year of construction: 2014, - Brand: Niftylift
- Type : HR21 HYBRID
- Year of construction: 2014
- Hours: 1646 hours
- Weight : 6510 kg.
- Engine: Kubota D722 Diesel + Battery
- Drive: 4x4 / AWD
- New batteries / 8x Trojan L16 Working height: 21 meters
- Lateral reach: 13 meters
- Built-in charger (220 Volts)
- Rotating basket
- Safety inspection possible
- Video on our website
- Trade-in and transport possible
Isdpfxs Ak Ddqs Amyjbd
* Brand: Niftylift
* Working height: 21 meters
* Lateral reach: 13 meters
* Drive: 4x4 / AWD
Video on website: Yes
Safety inspection: Possible
Year of construction: 2014
CE document: Present
* Weight: 6510
* Lifting capacity: 225 kg.
* Hours: 1646
Fuel: Diesel + Battery
* Engine: Kubota D722
Success:
Your message has been sent.
Listing
Hildesheim
6,802 km
High top van
Mercedes-BenzSprinter 317 Maxi,9GTronic,MBUX,Kamera,LED
Mercedes-BenzSprinter 317 Maxi,9GTronic,MBUX,Kamera,LED
Call
Condition: used, mileage: 49,978 km, power: 125 kW (169.95 HP), first registration: 12/2024, fuel type: diesel, empty load weight: 2,578 kg, maximum load weight: 922 kg, overall weight: 3,500 kg, axle configuration: 2 axles, wheelbase: 4,325 mm, fuel: diesel, color: white, gearing type: automatic, suspension: other, number of seats: 3, total length: 6,967 mm, loading space length: 4,307 mm, loading space width: 1,780 mm, loading space height: 1,940 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), had accident, onboard computer, sliding door, soot filter, traction control, Disc brakes, double passenger seat, rear step, interior paneling, wooden cargo floor, extra-long, right-hand mirror electrically adjustable, high roof, partition, accident damage, thermal protection glass, clock & tachometer, brake pad indicator, 3-door, 1st owner, Euro 6d, green environmental badge (4), steel rims, puncture repair kit, reversing camera, black, passenger airbag, sliding door right, navigation with color monitor, color monitor for navigation system, parking assist, parking assist camera, parking assist sensors rear, parking assist sensors front, electric windows 2-way, seat heating, radio/MP3, outside temperature display, tinted glass, heated exterior mirrors, power steering, wood trim, exterior mirrors electric, brake assist, rear-wheel drive, 3rd brake light, center armrest, German version, further equipment available, errors and prior sale excepted, trade-in possible, financing possible, please contact us, we will create a customized offer for you. Nationwide delivery possible. A50 front axle with increased load capacity, AR2 axle ratio i = 3.923, BA3 active brake assist, BH1 HOLD function, C6L multifunction steering wheel, CL1 steering wheel adjustable in inclination and height, CT1 vibration damper, D03 high roof, D50 full partition, E07 hill start assist, E1D digital radio (DAB), E1E navigation, E1U USB socket 5 V, E43 trailer socket 13-pin, E46 socket in the cab, E7M MBUX multimedia system, ES0 jump start - contact, ES5 charging package instrument panel, EW6 pre-installation remote services plus, EY2 live traffic information, EY5 Mercedes-Benz emergency call system, EY6 breakdown management, F1K coat hooks in the cab, F2W winter package, F64 exterior mirrors electrically foldable, F68 exterior mirrors heated and electrically adjustable, FF5 storage above windshield, FJ1 folding cover for storage compartment, FJ4 storage compartment under cockpit, FM3 WET WIPER SYSTEM, G43 9G-TRONIC, H15 seat heating for passenger, H16 seat heating for driver, H21 heat-absorbing glass with band filter on the windshield, HH9 semi-automatic climate control.
Ibsdpfj Ak Ddfox Amysd
Success:
Your message has been sent.
Listing
Velbert
6,995 km
Strapping press
CyklopCyklop XZE-311
CyklopCyklop XZE-311
Call
Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, Equipment: documentation/manual, Cyklop XZE-311
Year of manufacture: 2003
Passage width: max. 2,200 mm
Passage height: max. 2,200 mm
Roller guide spacing: 625 / 440 mm
Roller pitch: 60 mm
Strapping speed: 2.9 m/s
Strapping unit belt tension force: up to 2,000 N, adjustable
Pressing force: 5 – 48 kN, adjustable
Unit type: CFH 1
The machine was disassembled by us, and the complete documentation is available.
Ibodpfxe Ak Ddbj Amyed
Success:
Your message has been sent.
Listing
Velbert
6,995 km
Strapping press
MoscaKPM 131
MoscaKPM 131
Call
Condition: reconditioned (used), Year of construction: 1996, functionality: fully functional, MOSCA KPM 131 Pallet Strapping Machine with Turntable / Roller Conveyor
Ibodpe Ak Dczefx Amyed
Description
For sale is a used MOSCA KPM 131 pallet strapping machine with an integrated turntable roller conveyor and pallet centering system.
The system is designed for the automatic strapping of palletized products and features an integrated turntable roller conveyor with a diameter of approximately 1,800 mm.
The turntable allows the pallet to be rotated within the system and positioned according to the desired strapping direction.
The machine is suitable for Euro and industrial pallets with pallet runners in the running direction.
The strapping head is adjustable, allowing for different strapping positions.
Machine Data
• Manufacturer: MOSCA
• Type: KPM 131
• Year of Manufacture: 1996
• Control System: Siemens S5
• Throughput Width: max. 1,200 mm
• Throughput Height: max. 1,600 mm
• Integrated Turntable Roller Conveyor: Ø approx. 1,800 mm
• Pallet Centering System
• Adjustable Strapping Head
Strapping Technology
• Band Tension Adjustable: 200–2,000 N
• Band Speed: 4.6 m/s
• Sealing Method: Friction Welding
• Band Guide Positions: 440 mm / 625 mm
Press
• Pressing Force: up to max. 50,000 N
• Pressing Force Adjustable via Potentiometer
• Drive via Pole-Switching Gear Motor
• Rapid Traverse Speed: 150 mm/s
• Pressing Speed: 37 mm/s
Control Panel
• Width: approx. 1,200 mm
• Depth: approx. 650 mm
• Height: approx. 850 mm
Condition / Inspection / Integration
Prior to delivery, the machine will be assembled and completely inspected mechanically and electrically in our workshop in Velbert.
The strapping head and all relevant machine functions will be tested. Any necessary wear parts will be replaced after a technical inspection and in accordance with the agreed scope of services.
After completion of the work, a functional test of the complete system will be carried out.
Upon request, we can also take over the assembly, commissioning, and integration of the MOSCA KPM 131 into the customer's existing production or conveyor line.
This may include the implementation of the necessary electrical interfaces, signal exchange, and adaptation to the existing conveyor technology after prior technical coordination.
A functional test or pre-acceptance at our facility in 42551 Velbert is possible by appointment.
Transportation, assembly, commissioning, and integration can be offered separately.
Subject to prior sale and errors.
Success:
Your message has been sent.
Listing
Quakenbrück
6,937 km
Standard tractor unit
DAFXG 530 FT Standklima Intarder 2 Kreis Hydraulik
DAFXG 530 FT Standklima Intarder 2 Kreis Hydraulik
Call
Condition: used, mileage: 3,88,140 km, power: 390 kW (530.25 HP), first registration: 10/2022, fuel type: diesel, empty load weight: 8,390 kg, maximum load weight: 9,610 kg, overall weight: 18,000 kg, tire size: 385/55 R 22,5, wheelbase: 4,000 mm, next inspection (TÜV): 08/2027, brakes: intarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,400 mm, total width: 40,000 mm, total height: 65,200 mm, Year of construction: 2022, front tire size: 315/70 R 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, navigation system, parking heater, spoiler, Stand-alone air conditioning system, ABS, work lights, electrically adjustable and heated exterior mirrors, hands-free car phone system, adjustable roof spoiler, differential lock, electric windows left and right, XG cab, driver's seat with air suspension, leaf-air suspension, radio, 12 gears, Traxon automatic transmission, hydraulic system for sliding floor and tipping, air conditioning: air conditioning system + stand-alone air conditioning system, refrigerator, leather steering wheel, air horns, multi-function steering wheel, navigation system, fog lights, PTO preparation, entertainment: navigation system with screen, wheelbase 4000, sleeper cab, 2 sleeping berths, heated driver's seat, sun visor, spoiler package, standard auxiliary heater, fuel tank capacity 845 + 340 liters, telephone preparation, cruise control, Safety Package -1, auxiliary brake (Intarder), Euro 6 engine, axle configuration 4x2, luxury air driver's seat, luxurious cab for XG series, LED lighting front and rear, LED skylights, full spoiler, driver's seat rotatable and tiltable, Xtra Comfort spring core mattress, foldable co-driver's seat (cinema-style), DAF infotainment system (exclusive), 2-circuit hydraulics with leak oil line.
Isde Ak Dcpopfx Amyjbd
Success:
Your message has been sent.
Listing
Quakenbrück
6,937 km
Standard tractor unit
MAN18.520 4x2 TGX GW Standklima Intarder LED
MAN18.520 4x2 TGX GW Standklima Intarder LED
Call
Condition: used, mileage: 2,90,273 km, power: 382 kW (519.37 HP), first registration: 06/2023, fuel type: diesel, empty load weight: 7,913 kg, maximum load weight: 12,587 kg, overall weight: 20,500 kg, tire size: 385/55R22,5 160/-K, wheelbase: 3,600 mm, next inspection (TÜV): 09/2027, brakes: intarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 22,500 mm, total width: 38,820 mm, total height: 59,830 mm, Year of construction: 2023, front tire size: 315/70R22, 5 -/150L, Equipment: air conditioning, differential lock, navigation system, parking heater, spoiler, Stationary air conditioning system, work lights, electrically adjustable and heated exterior mirrors, hands-free car phone system for mobile phone, differential lock, electric windows left + right, GX cab, leaf-air suspension, 12 gears, ZF Traxxon automatic transmission, air conditioning: automatic climate control + stationary air conditioning system, refrigerator, leather steering wheel, air horns, multi-function steering wheel, navigation system, entertainment: navigation device with screen, sleeper cab, 2 sleeping berths, heated driver's seat, sun visor, split gearbox, spoiler package, standard auxiliary heater, safety package: adaptive cruise control + emergency braking assistant + lane keeping assistant + turning assistant, auxiliary retarder brake, Euro 6 engine, LED taillights, LED headlights, adaptive cruise control, 2 x fuel tank, ventilated driver's seat.
Ibjdpfs Ak Dctsx Amyod
Success:
Your message has been sent.
Listing
Quakenbrück
6,937 km
Standard tractor unit
VolvoFH 500 Globe XL Retarder Brandschaden
VolvoFH 500 Globe XL Retarder Brandschaden
Call
Condition: used, mileage: 3,00,000 km, power: 375 kW (509.86 HP), first registration: 01/2024, fuel type: diesel, empty load weight: 8,342 kg, maximum load weight: 9,658 kg, overall weight: 18,000 kg, tire size: 385/55 R 22,5, wheelbase: 3,800 mm, next inspection (TÜV): 01/2025, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, total length: 25,180 mm, total width: 38,520 mm, total height: 62,110 mm, Year of construction: 2023, front tire size: 315/70 R 22,5, Equipment: ABS, air conditioning, cruise control, differential lock, parking heater, spoiler, Work lights, electrically adjustable and heated exterior mirrors, hands-free mobile phone system, sunroof, disc brakes, adjustable roof spoiler, differential lock, electric windows left and right, Globetrotter XL cab, air-suspended driver's seat, leaf-air suspension, 12 gears, low noise, I-Shift automatic transmission, lifting and lowering mechanism, air conditioning: automatic climate control + auxiliary air conditioning, refrigerator, leather steering wheel, air horns, multi-function steering wheel, fog lights, entertainment: radio/CD/Bluetooth, wheelbase 3800, sleeper cab, 2 sleeping berths, heated driver's seat, sun visor, spoiler package, standard auxiliary heater, fuel tank capacity 750 liters (aluminum) + 405 liters (aluminum), cruise control, Safety Package -1, additional retarder brake, additional high beam headlights, Euro 6 engine, wheel configuration 4x2, auxiliary air conditioning, ABS, dual battery system, electrically operated sunroof, Top Safety Package: adaptive cruise control, emergency braking function, lane keeping assist, ESP, LED daytime running lights and LED taillights, VIN: YV2RT40A9RB448730.
Ibedpfx Aj Ak Dcwomyed
Success:
Your message has been sent.
Listing
Wrocław
6,307 km
Injection molding machine
KraussMaffeiKM 160-750 CX
KraussMaffeiKM 160-750 CX
Call
Condition: excellent (used), Year of construction: 2006, KRAUSS MAFFEI KM 160-750 CX Injection Molding Machine
Manufacturer: KRAUSS MAFFEI
Model: KM 160-750 CX
Year of Manufacture: 2006
Serial Numbers: 61008472 / 61008473
Clamping Force: 1600 kN (160 tons)
Screw Diameter: 50 mm
Drive: Hydraulic
Control System: MC5 with color monitor
CLOSING UNIT
Clamping Force: 1600 kN
Mold Opening Force: 86.4 kN
Force of moving platen – opening: 44.8 kN
Force of moving platen – closing: 37.8 kN
Dimensions of mounting plates: 820 × 845 mm
Distance between columns: 520 × 520 mm
Mold opening stroke: 650 mm
Mold height: 300 mm
Opening width: 950 mm
Ejector stroke: 150 mm
Ejector force: 22.6 / 9.9 kN
INJECTION UNIT
Screw Diameter: 50 mm
Injection Pressure: 1892 bar
Injection Volume: 393 cm³
Injection shot weight (PS): 358 g
Standard screw speed: 265 rpm
Nozzle radius: 10 mm
Nozzle orifice diameter: 4 mm
Ibodpfj Ak Dchex Amysd
ELECTRO-HYDRAULIC SYSTEM
Rated power of pump motor: 22 kW
Installed heater power: 15.62 kW
Number of cylinder heating zones: 5
Dry cycle time according to Euromap: 1600 cycles/h
Hydraulic oil tank capacity: 489 l
MACHINE DIMENSIONS AND WEIGHT
Length: 4900 mm
Width: 1600 mm
Height: 2100 mm
Machine weight with control cabinet: 6300 kg
Success:
Your message has been sent.
Listing
Cloppenburg
6,929 km
Curtain sider van
RenaultMaster
RenaultMaster
Call
Condition: used, mileage: 50 km, power: 125 kW (169.95 HP), first registration: 09/2026, fuel type: diesel, overall weight: 3,500 kg, wheelbase: 4,215 mm, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, number of seats: 3, loading space length: 4,840 mm, loading space width: 2,250 mm, loading space height: 2,300 mm, maximum speed: 169 km/h, Equipment: ABS, airbag, central locking, electronic stability program (ESP), onboard computer, second-hand vehicle warranty, soot filter, truck registration, Driver Assistance Systems:
* Trailer Stability Assist (TSA)
* Anti-lock Braking System (ABS)
* Traction Control System (ASR)
* Automatic headlight activation
* Electronic Stability Program (ESP)
* Electronic Traction Control (Extended Grip Control)
* Driver Assistance System: Hill Start Assist (HSA)
* Driver Assistance System: Driver Drowsiness Detection
* Driver Assistance System: Safety system with automatic emergency call (ERA GLONASS / eCall)
* Driver Assistance System: Lane Keeping Assist
* Speed control system including speed limiter
Technology & Safety:
* Airbag, driver side
* Exterior mirrors, electrically adjustable and heated
* Parking assist system, rear
* Power windows, front
Iedpfxs Ak Dcds Amyobd
* 6-speed transmission
* Tire repair kit
* Emission standard Euro 6e
* Start/Stop system for engine
* Daytime running lights, LED
* Central locking with remote control
Interior:
* Multimedia system Open R-Link (10" touchscreen)
* Seat cover / upholstery: Fabric
Other:
* Storage compartments on the dashboard (open)
* Drive type: Front-wheel drive
* Outside temperature display
* Driver Assistance System: Intelligent Speed Adaptation (ISA)
* Heater with recirculation function
* Interior lighting
* Interior filter: Pollen filter
* Body/superstructure: Long flatbed, instrument cluster analog
* Wheel covers
* Wheelbase 4215 mm
Load area: 4840 x 2250 x 2300 mm, warranty 24 months according to manufacturer, information about the manufacturer: Renault Deutschland AG, Renault, Peter-Huppertz-Str. 5, 51063 Cologne, , dialog.deutschland(at)
----Subject to prior sale and errors in this offer. Only the agreements in the order confirmation or purchase contract are binding. You will receive the exact equipment, the exact mileage and the selling price from our sales staff. Please contact us.
Success:
Your message has been sent.
Listing
Apeldoorn
7,074 km
Scania S 650 6x4, Rear tipper and Side openings TC11377
ScaniaS 650 6x4, Achterkipper en Zijopenen
ScaniaS 650 6x4, Achterkipper en Zijopenen
Call
Condition: used, mileage: 7,60,000 km, power: 477 kW (648.54 HP), first registration: 11/2019, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,700 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 9,000 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,500 kg, permissible axle load (axle 3): 9,500 kg, Equipment: ABS, electric window regulation, fog lights, parking heater, power assisted steering, power mirror, retarder, = Additional options and accessories =
- Above bed
- Air horn
- Air suspension
- High Beams
- Immobilizer
- PTO
- Radio
- Radio CD player
- Refridgerator
- Sleeping cabin
- Sper
= Remarks =
Superstructure
Material: Aluminium
Scania S650 V8 NGS,
11-2019,
760,000 km,
Euro 6,
6x4,
Retarder,
Backward and Side Tipper
= More information =
General information
Year of construction: 2019
Technical information
Number of cylinders: 8
Engine capacity: 16.353 cc
Axle configuration
Max. front axle load: 9000 kg
Rear axle 1: Max. axle load: 9500 kg
Rear axle 2: Max. axle load: 9500 kg
Weights
Empty weight: 13.625 kg
Carrying capacity: 14.475 kg
GVW: 28.000 kg
Isdpfx Amo Ak Dcasysbd
Functional
Extendable superstructure: Yes
Tipper: Left / Back
= Dealer information =
Bank data:
Rabobank Account: 39.33.10.655
IBAN: NL73RABO0393310655
Swift code: RABONL2U
- Always check our bank details before transaction!
- Reservation of vehicles is not possible without a deposit.
- Writing and text errors are reserved for all vehicles offered.
Success:
Your message has been sent.
Listing
Wrocław
6,307 km
Injection molding machine
KraussMaffeiKM 160-750 CX
KraussMaffeiKM 160-750 CX
Call
Condition: excellent (used), KRAUSS MAFFEI KM 160-750 CX Injection Molding Machine
Manufacturer: KRAUSS MAFFEI
Model: KM 160-750 CX
Year of manufacture: 2005
Serial numbers: 61007187 / 61007188
Clamping force: 1600 kN (160 tons)
Screw diameter: 50 mm
Drive: Hydraulic
Control system: MC5 with color monitor
CLAMPING UNIT
Clamping force: 1600 kN
Mold opening force: 86.4 kN
Force of moving platen – opening: 44.8 kN
Force of moving platen – closing: 37.8 kN
Dimensions of mounting plates: 820 × 845 mm
Distance between columns: 520 × 520 mm
Mold opening stroke: 650 mm
Minimum mold height: 300 mm
Maximum distance between platens: 950 mm
Ejector stroke: 150 mm
Ejector force: 22.6 / 9.9 kN
INJECTION UNIT
Screw diameter: 50 mm
Injection pressure: 1892 bar
Injection volume: 393 cm³
Injection shot weight (PS): 358 g
Maximum screw speed: 265 rpm
Nozzle radius: 10 mm
Nozzle orifice diameter: 4 mm
ELECTRICAL-HYDRAULIC SYSTEM
Rated power of pump motor: 22 kW
Power of installed heaters: 15.62 kW
Number of cylinder heating zones: 5
Dry cycle time according to Euromap: 1600 cycles/h
Capacity of hydraulic oil tank: 489 l
MACHINE DIMENSIONS AND WEIGHT
Length: 4900 mm
Isdpfx Ao Ak Db Sjmyjbd
Width: 1610 mm
Height: 2200 mm
Success:
Your message has been sent.
Listing
Wrocław
6,307 km
Injection molding machine
KraussMaffeiKM 230-1400 AX
KraussMaffeiKM 230-1400 AX
Call
Condition: excellent (used), Year of construction: 2012, KRAUSS MAFFEI KM 230-1400 AX Injection Molding Machine
Electric Injection Molding Machine
Model: KM 230-1400 AX
Year of Manufacture: 2012
Clamping Force: 2250 kN (225 tons)
Screw Diameter: 60 mm
Control System: MC5 with color monitor
CLAMPING UNIT
Clamping Force: 2250 kN
Platen Dimensions: 880 × 830 mm
Distance Between Tie Bars: 610 × 560 mm
Ibjdpfx Amo Ak Dbcjyed
Maximum Opening Stroke: 550 mm
Minimum Mold Height: 250 mm
Maximum Mold Height: 680 mm
Maximum Distance Between Platens: 1230 mm
Ejector Stroke: 130 mm
Ejector Force: 49 kN
INJECTION UNIT
Screw Diameter: 60 mm
L/D Ratio: 20:1
Injection Pressure: 2006 bar
Injection Volume: 679 cm³
Injection Weight (PS): 618 g
Injection Rate: 452 cm³/s
Maximum Screw Speed: 255 rpm
Nozzle Closing Force: 59 kN
ELECTRICAL PARAMETERS
Connected Load: approx. 53.3 kW
Heater Power: 22.7 kW
Number of Cylinder Heating Zones: 6
Dry Cycle Time according to Euromap 6: approx. 2.0 s (1800 cycles/h)
DIMENSIONS AND WEIGHT
Length: approx. 7000 mm
Width: approx. 2110 mm
Height: approx. 2050 mm
Machine Weight with Control Cabinet: approx. 11,000 kg
Success:
Your message has been sent.
Listing
Łomno
6,021 km
4-way forklift
HubtexDQ40D DIESEL TRIPLEX 6500 FREE-LIFT TOP1
HubtexDQ40D DIESEL TRIPLEX 6500 FREE-LIFT TOP1
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 6,230 h, load capacity: 4,000 kg, lifting height: 6,500 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: diesel, mast type: triplex, construction height: 3,250 mm, motor manufacturer: PERKINS, gearing type: hydrostat, fork carriage width: 1,250 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 250-15, overall weight: 11,400 kg, empty load weight: 7,400 kg, total height: 2,600 mm, total length: 2,500 mm, total width: 2,250 mm, color: orange, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, HUBTEX DQ40D – 2012 | 6,230 OPERATING HOURS | DIESEL | TRIPLEX 6,500 mm | FORK POSITIONER | FREE-LIFT 🚜
Ready to work from day one – no investment, no risk 🚀
---
Why choose this forklift? 🤔
Are you looking for a machine that won't interrupt your workflow? ⏱️
This HUBTEX DQ40D is a proven unit after comprehensive servicing – ready for immediate operation. No hidden fees. 💼
✔ major service completed (oil, filters, complete inspection of all components) 🔧
✔ technical and aesthetic condition: like new ✨
✔ only 6,230 operating hours – very low mileage 📊
✔ new tyres – no further investment needed 🛞
---
Key specifications ⚙️
* Capacity: 4,000 kg ⚖️
* Power: DIESEL ⛽
* Mast: Triplex – 6,500 mm 📏
* Fork positioner: 1,250 mm ↔️
* Forks: 1,200 mm
* Cabin: full, heated 🔥
---
Full technical specification 📋
General data:
* Year of manufacture: 2012 📅
* Operating hours: 6,230
* Capacity: 4,000 kg
* Load center: 600 mm
* Weight: 7,400 kg
Mast & lifting:
* Mast type: Triplex
* Lifting height: 6,500 mm
Forks & attachments:
* Fork positioner: 1,250 mm
* Forks: 1,200 mm
Dimensions:
* Height: 2,600 mm
* Length: 2,500 mm
* Width: 2,250 mm
* Closed height: 3,250 mm
Chassis:
* Tyres: superelastic (100%) – new 🛞
* Front: 200x50-10
* Rear: 250-15
Equipment:
* Full heated cabin 🔥
* Wide fork positioner ↔️
* Lighting 💡
* Free lift
Condition:
* Technical: 5/5 – post full service ✅
* Aesthetic: refurbished, like new, no corrosion ✨
---
Ideal for 🏭
✔ narrow aisle warehouses 📦
✔ timber, steel, and pipe industries 🪵
✔ long load handling 📏
✔ indoor and outdoor applications 🌦️
---
What you get 💼
You’re not buying a “used forklift.”
You’re buying a fully prepared, ready-to-work machine:
✔ every machine is fully tested before sale 🔍
✔ ready for immediate deployment 🚀
✔ live online demonstrations available 💻
✔ transport to your facility provided 🚛
---
Ibodpfo Ak A Ulex Amyod
Delivery and support 🌍
* transport across Europe
* comprehensive logistics support
* assistance with leasing/financing 💰
* after-sales support 🤝
---
Why FT LOGISTICS? 💪
We deliver forklifts that perform – not machines that stay in the workshop.
✔ over 100 units available 📊
✔ in-house servicing and preparation 🔧
✔ pan-European experience 🌍
✔ hundreds of satisfied clients ⭐
Success:
Your message has been sent.
Listing
Łomno
6,021 km
4-way forklift
CombiliftC6000 DUPLEX 4,7 DIESEL FORK POSITIONER
CombiliftC6000 DUPLEX 4,7 DIESEL FORK POSITIONER
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 5,817 h, load capacity: 6,000 kg, lifting height: 4,760 mm, free lift: 2,080 mm, load center: 600 mm, fuel type: diesel, mast type: duplex, construction height: 3,400 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,600 mm, fork length: 1,250 mm, fork width: 200 mm, fork thickness: 60 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 400 / 60 - 15, overall weight: 17,500 kg, empty load weight: 11,500 kg, total height: 2,700 mm, total length: 2,500 mm, total width: 2,850 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT C6000 DIESEL DUPLEX 4760 MM FORK POSITIONER FULL FREE LIFT FULL CABIN READY FOR WORK
## ✅ FULLY SERVICED
## ✅ WARRANTY INCLUDED
## 🌍 WORLDWIDE DELIVERY AVAILABLE
Are you looking for a reliable multidirectional forklift that is ready to generate value from day one, instead of creating unexpected maintenance costs?
This Combilift C6000 has been professionally prepared by our experienced service team and is ready for immediate operation. The truck has undergone a complete technical inspection, full servicing, and extensive operational testing to ensure maximum reliability and performance.
Ideal for production facilities, warehouses, steel service centres, and companies handling long or bulky materials.
---
# ⭐ Key Advantages
✅ Fully serviced before delivery
✅ Start-up warranty included
✅ Brand new Super Elastic tires
✅ Excellent technical and cosmetic condition
✅ Ready for immediate operation with no additional investment
✅ Live online video inspection available
✅ Worldwide shipping available
---
# 📋 Technical Specifications
Ibsdpfx Ams Ak A Uhjyed
Manufacturer: Combilift
Model: C6000
Year of Manufacture: 2019
Load Capacity: 6000 kg
Engine: Diesel
Operating Hours: 5817 h
Mast Type: Duplex
Lift Height: 4760 mm
Fork Positioner Opening: 1600 mm
Fork Length: 1250 mm
Cabin: Full enclosed, heated cabin
Truck Weight: 11500 kg
---
# 📏 Dimensions
• Overall Height: 2700 mm
• Length: 2500 mm
• Width: 2850 mm
• Mast Closed Height: 3400 mm
---
# 🛞 Tires
Front: 23 x 10 - 12
Rear: 400 / 60 - 15.5
Condition: 100 percent brand new Super Elastic tires
---
# ⚙ Equipment
✔ Hydraulic Fork Positioner
✔ Full Enclosed Heated Cabin
✔ Full Free Lift
✔ Working Lights
---
# 🏭 Ideal For
✔ Timber Industry
✔ Steel Mills
✔ Steel Service Centres
✔ Structural Steel Manufacturers
✔ Handling Pipes, Profiles, and Long Loads
✔ Indoor and Outdoor Applications
---
# 💼 Why Choose FT LOGISTICS
FT LOGISTICS specializes exclusively in forklifts, side loaders, multidirectional forklifts, and warehouse equipment.
Every machine is thoroughly inspected, professionally serviced, and tested before delivery to guarantee reliability and immediate productivity.
We currently have more than 100 machines available from stock and deliver equipment to customers throughout:
🌍 Europe
🌍 South America
🌍 Africa
🌍 Asia
🌍 Middle East
---
# 🤝 Our Services
✅ Complete pre-delivery inspection and servicing
✅ Warranty
✅ Professional technical support
✅ Leasing and financing solutions
✅ Worldwide transport organization
✅ Export documentation and customs support
✅ After-sales service
---
# 🎥 Additional Services
We can provide:
📹 Live online video demonstration
📸 Additional high-resolution photos
🎬 Detailed walk-around videos
🚛 Customized transport quotation with delivery directly to your facility anywhere in the world
---
## ⭐ Hundreds of customers across Europe and worldwide trust FT LOGISTICS and continue to choose us for the quality of our machines and professional customer service.
## FT LOGISTICS
### We Deliver Machines Ready To Work
Success:
Your message has been sent.
Listing
Łomno
6,021 km
4-way forklift truck
CombiliftC4000 / GAS / TRIPLEX / 9300MM /LIKE NEW
CombiliftC4000 / GAS / TRIPLEX / 9300MM /LIKE NEW
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 5,421 h, load capacity: 4,000 kg, lifting height: 9,300 mm, free lift: 3,250 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 4,250 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire size: 200/50-10, rear tire size: 27/10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,450 mm, total length: 2,450 mm, total width: 2,250 mm, color: red, Equipment: all wheel drive, cabin, fork extension, lighting, pallet forks, retractable fork, sideshift, 🔧 Looking for a reliable forklift? We are specialists in the industry!
We specialize in the sale of high-quality forklifts, offering thoroughly inspected machines in excellent condition.
Check out our offer and find the perfect equipment for your company! 💼
🚜 In this listing we present:
COMBILIFT C4000 – TRIPLEX 9300 mm – Year 2017 – GAS – EXTENDABLE FORKS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5
This forklift is in excellent technical condition, fully serviced and ready for immediate use. ✅
Iodpfj Ak A Udex Amyebd
📊 Key Features & Technical Data:
Model: COMBILIFT C4000
Year of manufacture: 09/2017
Load capacity: 4000 kg
Mast type: Triplex
Lifting height: 9300 mm
Drive type: GAS
Load center: 600 mm
Engine manufacturer: G.M.
Engine power: 74 HP
Total weight: 6700 kg
Free lift: 3250 mm
Tires: Solid, Superelastic, in good condition
Front tires: 200/50-10 – 100% tread
Rear tire: 27/10-12 – 100% tread
Overall mast height (lowered): 4250 mm
Technical condition: Fault-free, after full service 🛠️
Visual condition: Very good
Fork length: 1200 mm / 2000 mm when extended
Total height: 2450 mm
Total length: 2450 mm
Total width: 2250 mm
Fork positioner width: 1320 mm
⚙️ Equipment:
Extendable forks
Work lights
Adjustable boom
Pallet forks
Enclosed cabin
Freelift
Fork side shift
This forklift is the perfect solution for industries requiring efficient handling of long loads in narrow spaces, such as wood, steel, or pipe manufacturing.
Its multi-directional movement system ensures easy maneuverability and optimal use of warehouse space. 🏗️
🛡️ Additional Features:
Integrated multi-directional control system
Comfortable operator cabin
High reliability under intensive use
Suitable for both indoor and outdoor operations
✅ Condition:
Fully operational, regularly serviced, and ready to work immediately.
🚚 We offer delivery throughout Europe and a FREE initial inspection!
💶 Pricing & Financing:
We offer complete support with financing, including fast leasing and credit decisions — even for new businesses or companies with a challenging financial history.
Invoicing available in EUR or PLN
Leasing options, including Start-Up programs
We are an authorized supplier for most major leasing companies
Leasing decision within 2 hours
FAST / SIMPLE / AFFORDABLE FINANCING
Success:
Your message has been sent.
Listing
Wrocław
6,307 km
Injection molding machine
KraussMaffeiKM 2700 - 24500 MC
KraussMaffeiKM 2700 - 24500 MC
Call
Condition: excellent (used), Year of construction: 2003, KRAUSS MAFFEI KM 2700 - 24500 MC injection molding machine
Year of manufacture: 2003
CLAMPING UNIT
• Clamping force: 27,000 kN
• Mold opening force: 1767 kN
• Platen dimensions (H × V): 3020 × 2600 mm
• Distance between tie bars (H × V): 2100 × 1700 mm
• Maximum opening stroke: 2800 mm
• Minimum mold height: 1100 mm
• Maximum mold height: 1900 mm
• Maximum distance between platens: 3900 mm
• Ejector stroke: 350 mm
INJECTION UNIT
• Injection unit type: SP 2450
• Screw diameter: 165 mm
• Screw length-to-diameter ratio L/D: 23
• Maximum injection pressure: 1523 bar
• Injection volume: 16,037 cm³
• Injection shot weight (PS): 14,594 g
• Injection rate: 1725 cm³/s
• Plasticizing rate (PS): 341 g/s
• Maximum plasticizing rate (PS): 443 g/s
MOLD COOLING SYSTEM
Fixed platen – operator side:
• 8 cooling circuits
• 1 additional Camlock circuit
Fixed platen – opposite operator side:
• 8 cooling circuits
• 1 additional Camlock circuit
Moving platen – operator side:
• 8 cooling circuits
• 2 additional Camlock circuits
Moving platen – opposite operator side:
• 8 cooling circuits
• 2 additional Camlock circuits
CORE AND NOZZLE CONTROL
Fixed platen:
• 4 hydraulic cores
• Control for 4 hydraulic cores
• Control for 10 pneumatic nozzles
• Control for 16 hydraulic nozzles
Moving platen:
• 4 hydraulic cores
• Control for 4 hydraulic cores
MACHINE EQUIPMENT
• Gravimetric dosing system
• Capability for injection using Microjet technology – chemical foaming of plastic
Ibedpfx As Ak A Uasmyod
• Mold cooling control system
• Hydraulic core control system
• Pneumatic and hydraulic nozzle control system
ADDITIONAL EQUIPMENT – AVAILABLE FOR SEPARATE PURCHASE
1. Hot runner controllers
• 4 controllers with 8 heating zones each – 32 zones
• 1 controller with 12 heating zones
• Total of 44 heating zones
2. FANUC 430i industrial robot
• 6-axis robot
• Payload: 165 kg
3. HRS – Flex Flow system
• Flex Flow system controller
4. SISE system
• Pressure and temperature controller
5. Safety and transport system
• Safety cage
• Conveyor belt
6. Additional injection unit
• Injection unit with a 120 mm diameter screw
Success:
Your message has been sent.
Listing
Łomno
6,021 km
4-way forklift
CombiliftC3000XL GAS DUPLEX 4550 SIDE SHIFT
CombiliftC3000XL GAS DUPLEX 4550 SIDE SHIFT
Call
Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 6,456 h, load capacity: 3,000 kg, lifting height: 4,550 mm, free lift: 2,100 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,150 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,150 mm, fork length: 1,200 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23 X 10 - 12, rear tire type: cushion tires (black), rear tire size: 355 X 65 - 15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,250 mm, color: yellow, Equipment: 3rd hydraulic function, 4th hydraulic function, CE marking, all wheel drive, cabin, fork extension, front guard, head guard, hydraulic fork positioner, lighting, pallet forks, sideshift, # COMBILIFT C3000XL | DUPLEX 4550 MM | FORK POSITIONER | FREE LIFT | FULL CABIN | READY TO WORK
🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 DELIVERY ACROSS EUROPE AND WORLDWIDE
If you are looking for a forklift that will start generating value from day one instead of incurring additional service costs, this machine is the right choice for you.
We are offering a proven and fully prepared COMBILIFT C3000XL multidirectional forklift. The machine has undergone a comprehensive technical inspection, complete servicing, and detailed testing. It is fully prepared and ready for immediate operation in a production facility, warehouse, or logistics center.
### ⭐ KEY BENEFITS
🔧 Complete service performed before sale
🛡️ Start-up warranty
🛞 Brand new superelastic tires
✨ Very good technical and visual condition
✅ Ready to work without additional investment
🎥 Live online video presentation available
🚛 Direct delivery to the customer available
### 📋 TECHNICAL SPECIFICATION
🏭 Manufacturer: COMBILIFT
🚜 Model: C3000XL
📅 Year of manufacture: 2016
🏋️ Load capacity: 3000 kg
⛽ Power: LPG
⏱️ Operating hours: 6456 h
⬆️ Mast: DUPLEX
📏 Lifting height: 4550 mm
↕️ Free lift: 2100 mm
↔️ Hydraulic fork positioner: 1150 mm
🍴 Fork length: 1200 mm
🚪 Cabin: Full and heated
⚖️ Machine weight: 6800 kg
### 📐 DIMENSIONS
📏 Overall height: 2550 mm
📏 Length: 2100 mm
📏 Width: 2250 mm
📏 Mast closed height: 3150 mm
### 🛞 TIRES
🔹 Front: 23 x 10 - 12 superelastic
🔹 Rear: 355 x 65 - 15 superelastic
✅ Tire condition: 100 percent brand new
### ⚙️ EQUIPMENT
↔️ Hydraulic fork positioner
🔥 Full heated cabin
↕️ Free lift
💡 Work lights
🚨 Warning beacon
### 🏗️ IDEAL FOR
🪵 Timber industry
🏭 Steel mills and steel stockholders
🔩 Steel construction manufacturers
📦 Handling pipes, profiles, and long materials
🏢 Indoor and outdoor operation
### ⭐ WHY FT LOGISTICS
When purchasing from FT LOGISTICS, you are buying from a company specializing in forklifts, sideloaders, multidirectional forklifts, and warehouse equipment.
🔧 Every machine undergoes a comprehensive technical inspection, complete service, and detailed testing before being released to the customer.
🚜 We have more than 100 machines available from stock and supply equipment to customers throughout Europe, South America, Africa, Asia, and the Middle East.
### 🤝 WE PROVIDE
🔧 Complete service before sale
🛡️ Warranty
👨🔧 Professional technical advice
💶 Leasing and financing
🚛 Transport organization
🌍 Export services and customs documentation
🤝 After-sales support
Hundreds of customers across Europe have trusted our machines and continue to return to us for further purchases.
🎥 We can arrange a live online presentation of the machine, provide additional photos and videos, and prepare an individual transport quotation directly to your company.
### FT LOGISTICS
🚜 WE DELIVER MACHINES READY TO WORK.
Ibjdpfxe Ak A T Sj Amysd
Success:
Your message has been sent.
Listing
Austria
6,658 km
Temperature control unit
HB-ThermHB-100 U1 Series 4
HB-ThermHB-100 U1 Series 4
Call
Condition: excellent (used), Year of construction: 2008, Temperature range max. 100 °C
heating capacity 8 kW
weight of the machine ca. 180 kg
Isde Ak A T Depfx Amyobd
dimensions of the machine ca. 700 x 200 x 550 mm












































































































































































































































































































































































