Used Jaguar Stype for sale (22)

Condition: excellent (used), Year of construction: 1950, THE classic with H-approval! _____ Get one of the most beautiful Jaguar Mark V Drophead Coupé, which is currently available on the market! The Mark V model is rightly considered one of the most beautiful convertibles of the 40s / 50s, and is on a par with the most exclusive cars of that time. It was built only from 1948 to 1951 and in very small numbers. Only 971 of these fantastic cars were built, only 577 of them Bodpfsnaby Asx Addslr as left-hand drive - at most 50-80 left-hand drive cars worldwide are even somewhat preserved.... How many of these gems have survived to this day is uncertain, the vehicle is practically no longer available throughout Europe! A significant increase in value thus guaranteed, even in the U.S. are only a handful of cars on the market The car was sold to the USA after production in 1950, and was registered only once in California. In the early 90s, the car was brought back to Europe. There it was completely disassembled in years of meticulous work, and in the context of an extensive restoration piece by piece into a real top condition. Here, without regard to the cost, really everything was done that was necessary to transform the car into a visual and technical eye-catcher. The Jaguar was completely gutted and the bodywork, interior and electrics were overhauled or replaced with original spare parts. As part of this work, a complete repaint was carried out inside and out, and the color lavender grey was replaced by black, also an original Jaguar color that suits the car much better. The seats were reupholstered, and covered with new red leather, also the carpets were completely renewed, and all the wood was reworked. In 2012 / 2013, the technology was again extensively revised, here the drivetrain was completely overhauled, and various wear parts replaced. In addition, all work was carried out for the H-approval, which took place in 2013. In this period alone, work was carried out for over 18,000 euros, the invoices are available. All add-on parts of the car are in excellent condition, all functions are flawless. The car is absolutely rust-free, and was extensively protected against corrosion within the restoration work. After the restoration, the car was placed in a closed shed, and since then has covered a total of only 290 miles in motion driving and MOT. All documentation is of course supplied with the vehicle, as well as extensive photographic material of the work carried out. A current value appraisal is just as present as letter and bill, in addition you receive a birth certificate of the Jaguar Daimler Heritage Trust. Also included is a detailed appraisal according to Classic Data of TÜV Süd about an estimated price of Euro 135.000.- and overall condition 1! Currently, comparable vehicles are offered at Car & Classic already for up to 160,000 British pounds!!!

Condition: used, mileage: 70,000 km, power: 128 kW (174.03 HP), fuel type: gasoline, gearing type: automatic, first registration: 03/1989, next inspection (TÜV): 03/2018, number of seats: 4, Private sale from collection!! This is a vehicle that was built in a small series. About 12 as Coupe and 4 as Cabriolet. The technology is completely from a Jaguar XJ 6, with automatic transmission. The vehicle is right-hand drive. These vehicles were built from 1985–1989. Further information about these vehicles can be found under ATLANTIS VEHICLES on the internet. Bljdpfx Aewnu Tnjdder POSSIBLY ALSO TRADE WITH VALUE COMPENSATION!!! PORSCHE-MERCEDES-BENTLEY-FERRARI... or similar....!!!

Condition: used, Year of construction: 1994, Double spindle multi rip saw - Manufacturer: A.Costa - Model: Jaguar - Max cutting height: 200 mm Blsdjtqld Ujpfx Addjr

Condition: used, Year of construction: 2025, operating hours: 246 h, CLAAS Jaguar 940 Demonstration Machine 2025 Equipment: Best Brand - Driver's Package: Comfort cab with A/C MATIC (automatic air conditioning and heating) Electric and heated rearview mirrors LED maintenance and access lighting DAB+ radio Premium LED work lighting Cooling unit for storage box L Sun blinds, smartphone holder, and compressed air in the cab Leather comfort seat, air-suspended PREMIUM LINE Longlife (6,000 operating hours or 10 years) PREMIUM LINE advanced package - Crop flow L and carbide counterblade Assistant package: DYNAMIC POWER Camera system, ready AUTO Fill wagon filling system V-FLEX 28 chopping unit, including corn knife MULTI CROP CRACKER MAX 120/130 teeth with Busa CLAD coating Blodpewfivrefx Addjr Silage additive system with tank (375 l) and ACTISILER 37 Electro-hydraulic accelerator gap adjustment Drive axle with differential lock Front tires 710/75 R34 Front tire pressure control system Mercedes Benz R6-cylinder OM471 LA (390 kW/530 hp) Compressed air horn Rear camera with CEBIS display PROFI CAM QUANTIMETER yield measurement Steering angle sensor STOP ROCK stone detector CAM PILOT steering pilot Dynamic steering Compressed air brake PickUp 300 Profi Contour | Internal No.: 11277163

Year of construction: 2001, condition: reconditioned (used), Nice Record Jaguar flow pack machine. Has come direct from a Bankrupt bakery where it was wrapping bread rolls at 66 pieces per minute. Complete with printer etc. Blodpshg Uitefx Addor

Condition: used, Year of construction: 2017, front tire size: 800/70R32, rear tire size: 600/65R28, with Claas PickUp 300 with Claas Orbis 7.50m Mercedes engine 430kW, 585hp 36 / knife drum grain cracker Auto Fill tire pressure control system reversing camera / silage additive system / Bljdpfx Adetpgm Eoder

Condition: excellent (used), Year of construction: 2016, operating hours: 30,380 h, functionality: fully functional, machine/vehicle number: 8104000143B, spindle motor power: 2,200 W, turning length: 180 mm, turning diameter over cross slide: 20 mm, spindle speed (max.): 10,000 rpm, turning diameter: 20 mm, bar diameter (max.): 20 mm, power: 2.2 kW (2.99 HP), 2016 DMG MORI SPRINT 20/5 SWISS TYPE CNC LATHE + IEMCA SMART 320 BARFEEDER Complete machining of workpieces measuring up to ø 20 × 600 mm in a footprint of under 2m² Condition Used - Good Location Turkey Automatic turning with 5 linear axes and up to 2 C-axes Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Max. X-axis stroke 50 mm Max. Y-axis stroke 325 mm Max. Z-axis stroke 60 mm Max. workpiece diameter 20 mm Max. workpiece length 180 mm Max. bar capacity diameter 20 mm Max. X-axis stroke 50 mm Max. Y-axis stroke 325 mm Max. Z-axis stroke 60 mm FANUC 32I Control Main spindle with 10,000 rpm, 14 Nm, 2.2 kW (nominal) Counter spindle with 10,000 rpm, 4.8 Nm, 1.5 kW (nominal) SWISSTYPEkit optional for short and long part turning on one machine Total of 23 tool stations Up to 6 driven tool stations, 4 driven tool stations as standard, 2 driven stations for back-working optional Driven tools spindles 6,000 rpm, 1.43 Nm, 0.9 kW (nominal) Control panel with 10.4" color display and FANUC 32i 2 control channels, 5 linear axes and up to 2 C-axes Tool Monitoring System with graphical tool load display as option Up to 2 tools working simultaneously ADDITIONAL ACCESSORIES (INCLUDED IN THE PRICE) 2016 IEMCA SMART 320 BARFEEDER (The SMART 320 is an automatic high-performance bar feeder for working with sliding headstock lathes with bar diameters between 3 and 20 mm and lengths from 1,500 to 4,060 mm. The Smart is a bar feeder that is simple to use and fast. BAR CHANGEOVER TIME 19 sec.) and collets with channel set, vibration kits. Chip Conveyor 70 bar high pressure pump and distributors. Long Part kit and table. Part Conveyor Parts Catcher and box Bledpfxjuy R Nzs Adder Live Tooling Changing kit from steady to sliding headstock Counter spindle collet cleaning Kit for machining with soluble water coolant Signal lamp 4 colors Transformer Standard and driven tools kit.

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, 12-color printing machine MHM – TESOMA gas dryer – GADDA stacker – complete line price €55,000. VAT and transport at buyer's expense. Optional: three MHM hoods, three series of pallets. Blsdew S Navepfx Addsr

Condition: used, all stainless steel for 200L eurobins Bljdpjwxwc Tefx Adder discharging height ± 3.500 mm dimensions: (l x w x h) : ± 3.500 x 1.500 x 4.500 mm

Year of construction: 2008, condition: used, Year of manufacture: Feb 2008 Blodpfovz S Rlex Addjr New: No Serial number: many we have some used terminal tractors for sale wich can be used for parts, the trucks are in working condition.

Condition: excellent (used), Year of construction: 2017, operating hours: 9,400 h, machine/vehicle number: 7584, 2000mm Table CNC S type Elevating Crosslide Webster Bennett (Original CNC). Modified 2 to suit users capacity. Original ATC removed to increase turning capacity. Extended Height workpiece ht. 1600. with Z axis travel. 1350mm ram tooling adapted to accept Capto no.6 tooling. Bjdpfx Adsvztfkedslr Spindle speed infinitely programmable max 182rpm. Fully remanufactured 2017. Retrofitted with a Fagor 8055 cnc with operator input conversational programming, operator remote for setting. New electrical retrofit with Fagor axis servos and motors. Fully enclosed interlocked guard system, swarf deflectors to removable bins, Full software and documentation available.

Condition: new, pressure: 150motor: 15daylight: 500stroke lenght (max.): 400table diamension: 900 x 600tappet area: 900 x 600table height: 850messurements (LxWxH): ca. 1300 + (300 Schaltschrank) x 2000 x 3200weight approx.: 8000oil filling: 400Hydraulic C-Frame PressType: C-Frame, hydraulicCapacity: Pressing force: 150 tons at 240 bar Return force: 30 tons at 150 bar Control ModesMode 1: Setup mode without light sensor Mode 2: Automatic single stroke with light sensor Hydraulic SystemMain cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs Ø 70 x 40 mm Guiding columns: 4 pcs Ø 50 mm Main motor: 15 kW / 22 HP (IE3) Pump: 45 cc, 65 l/min – REXROTH Tank capacity: 500 liters Oil volume: 400 liters Auxiliary motor: 2.2 kW / 3 HP Auxiliary pump: included Oil tank air cooler: included Adjustable Speeds (via PLC)Advance stroke: 120 mm/s Return stroke: 140 mm/s Pressing phase: 13 – 5 mm/s Mechanical DataDaylight (open height): 500 mm (distance between ram and table) Stroke length: 400 mm Table depth: 650 mm Throat depth: 350 mm Table height: 850 mm (floor to top of table) Plate DimensionsTable plate: 900 x 600 x 120 mm (with T-slots – customizable) Ram plate: 900 x 600 x 300 mm (with T-slots & spring welding) Hydraulic AccessoriesHydraulic block & valves by REXROTH Pre-fill valve Hydraulic and mechanical ram locking at TDC Pressure & speed adjustable via PLC Side safety doors (slidable towards rear) Control & ElectronicsMain control cabinet PLC: Siemens S7–1200 Safety PLC: SICK Swiveling control panel with soft starter Mobile two-hand control Light sensors: SICK (700 mm + 130 mm) Stroke measurement: 500 mm linear scale HMI: 9 Siemens display (storage for up to 500 tools) Remote maintenance module: Secomea Dual LED work area lighting 8 free I/O ports on PLC (for external systems like robot or coil feeder) Bledpfx Aewzzzfedder General SpecificationsPower supply: 400 V / 50 Hz Standards: Complies with EN 693 machine directive Control safety: Dual-channel secured Valves: Hydraulic proportional valves Documentation: Operating manual, parts list & maintenance plan (in German) Warranty: 12 months (optional 24 months) Paint color: Main frame RAL 7035 – light grey Dimensions & WeightOverall dimensions (W x D x H): approx. 1300 mm + 300 mm control cabinet x 2000 mm x 3200 mm Weight: approx. 8,000 kg

Year of construction: 2018, operating hours: 31,241 h, condition: like new (used), machine/vehicle number: IntNr231416, CNC-DMG Gildemeister MULTISPRINT 36 / SWISSTYPE machining up to 170 mm turning length Year of manufacture: 2018 Operating hours: 47,548 Machining time: 31,241 Status: October 2025 Control: Fanuc 30i B Maximum flexibility of the MULTISPRINT thanks to its modularity and Y-axes on every spindle position. Use of driven tools on all spindle positions. Y-axis available on all spindle positions as standard. SWISSTYPEkit for short and long turning up to 170 mm length. Chuck or bar machining: bars from 4 to ø 36 mm, chuck parts up to ø 50 mm. Double rear and off-center machining possible. Machine type: Multi-spindle automatic lathe SWISSTYPE machining: up to 170 mm turning length Control: FANUC Series 30i Maximum flexibility thanks to modularity and Y-axes on all spindle positions Use of driven tools on all spindle positions Machining: bars from Ø 4 – 36 mm, chuck parts up to Ø 50 mm Double rear and off-center machining possible Performance Data Feature Value Blsdpfx Adexrc Rgedsr Max. workpiece diameter 36 mm Max. workpiece length 170 mm Max. bar capacity 36 mm Travel (X / Y / Z) 50 / 100 / 170 mm Main spindles Number: 6 C-axes (angular resolution): 0.002° Cross slides: 6 × (X-/Y-axis) Travel Z1–Z6: 170 mm (with SWISSTYPE-Kit) Max. bar capacity: Ø 40 mm Spindle speed: up to 7,500 rpm Drive power (100% duty cycle): 3 kW Torque (100% duty cycle): 32 Nm Drum indexing time: 0.65 s Counter spindles / Pick-up spindles Quantity: 2 (C-axes with X-/Y-/Z-axis) Through bore: Ø 40 mm Spindle speed: 7,500 rpm Drive power: 3 kW Torque: 32 Nm Travel (Z7–Z8): 410 mm Travel (X7–X8 / Y7–Y8): 277 / 312 mm Rapid traverse speed: 40 m/min Tool holders on cross slides Max. number of tools: 3 Spindle speed: 3,900 / 8,000 rpm Drive power (100% duty cycle): 0.9 kW Torque (100% duty cycle): 5.8 / 2.9 / 1.7 Nm Travel (X1–X6 / Y1–Y6): 50 / 100 mm Rapid traverse speed: 20 m/min Slides for rear machining Spindle speed (U7–U8): 3,900 / 8,000 rpm Drive power: 0.9 kW Torque: 5.8 / 2.9 / 1.7 Nm Control display: 15" color monitor (×2) Clamping system: Hainbuch TOPlus 40 quick-change collet chuck Hinged belt chip conveyor with lift pump High-pressure oil system (filters 50 / 25 µm, pumps 5 / 12 MPa) Various tool holders Fire extinguishing system Bar loading magazine (surface loader design) Workpiece loading system The machine is fully functional both electrically and mechanically and can be inspected under power by appointment. Subject to technical changes and errors and prior sale!

Condition: used, Make: Leomotor A/SType: KC 218B159 - LM 2000 - 12630 Blsdpfxedc A Rno Adder

Condition: used, Year of construction: 1994, with Supergehrfixangle mitre fenceused, good conditionmake Panhanstype 690year of construction 1994machineNo. 1286GS wood dust testedmotor 5.5 kWsteel guidescarriage length approx. 3200 mmcutting width approx. 1250 mmswivel up to 45°scoring unitparallelogram protectiontable top extensionhydraulic height adjustmenthydraulic swivel adjustmentdigital display:- cutting angleangle stop as mitre fence with length compensation / super mitre fixsuction connection D 120/80 mmspace requirement approx. 3200 mm x 3700 mm x 1700 mmWeight approx. 1000 kgTotal connected load approx. kWStorage location 97447 Gerolzhofen, free loadingHandover as is, as inspectedwithout guarantee and warranty Bljdpfsvxr Npox Addsr

Condition: good (used), Used stainless steel container with agitatorWith double jacket and insulationArticle number: 10448Last intended use: FoodstuffsVolume: approx. 2,600 litresType: Standing on rackMaterial (wetted by medium): 1.4301 Stainless steelDesign: Double jacket / insulatedBottom: Vaultedtop: Flat bottom / hinged lidDimension tank:Outer diameter: 1640mmCylindrical height: 1240mmHeight of feet: 445mmDistance drain to bottom: 280mmTotal height: 2055mmTotal width: 1640mmMaterials:Inside: 1.4301 / AISI304Outside: 1.4301 / AISI304Fittings:Outlet: DN 50mmAgitatorMiscellaneous connectionsDouble jacketInsulatedFlap lid Blodpod Tmgfsfx Addsr

Condition: used, Year of construction: 1988, usedmake Hesstype Hydro-Spezialyear of construction 1988cylinder horizontal 2working width 3550 mmworking height 2350 mmpressing depth 100 mmweight approx. 2000 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Bljdpevwfw Defx Adder

Condition: good (used), Used pressure vessel Part number: 10451Last intended use: PharmacyVolume: 570 litresType: Standing on 4 rollsMaterial (wetted): 1.4435 Stainless steelDesign: Single-walledBottom: ArchedTop: ArchedOperating pressure acc. to German regulations Nameplate: -1/ 2 BarDimension Tank:Manhole: 320mmOuter diameter: 900mmHeight of cylinder: 660mmHeight of feet: 400mmTotal height: 1680mmTotal width: 950mmMaterials:Inside: 1.4435 / AISI316LOuter parts: 1.4301 / AISI304Fittings:Nameplate: yes2x Spray headsMiscellaneous connections Bleded Twa Hepfx Adder

Condition: used, Year of construction: 1992, second handMake HessType SO-1992-811Year of construction 1992Track length approx. 3200 mmBand width approx. 250 mmMotor 0.25 kWRequired space approx. 3250 mm x 800 mm x 1600 mmStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without overhaulwithout guarantee and warranty Bedpfx Aevwf H Sjddslr

Condition: used, Year of construction: 1987, Edge and profile sanding machine with new feed beltused, great condition, little used, top equipmentMake ArminiusType ST-4Year of construction 1987Machine no. 1948Belt feed with top pressure rollers and support roller conveyorapplication-controlled sanding pad that can be exchanged for a profile sanding bodyProfile grinding spindle with infinitely variable speed controlGrinding spindle 28 x 90 mm1.5 kW / max. 1,500 plessWorkpiece passage height 0-100 mmMotor 1.5kWMotorized oscillation 0.02 kWVeneer edge grinding device with controlled shoefront table approx. 500 mm x 1350 mmUnit tiltable 0-90°Belt length 1600 mmBand width 150 mmBelt speeds infinitely variablemobilemiter gaugeRound edge grinding deviceInfinitely variable feed system - belt feed with top pressure 5-25 m/e tiltable 0-90°New price approx. €25,000.00Suction connection 100 mmSpace requirement approx. 1350 mm x 930 mm x 1100 mmWeight approx. 280 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seenWithout guarantee and guarantee Bljdpfx Adovwfx Ieder

Condition: new, Power 15 KW Bedsvwfhcepfx Addelr Technical specification:Hopper opening: 600 x 800 mmHopper capacity: 0.6 m³Working width of the rotor: 600 mmDiameter of the rotor: 260 mmDrive power: 15 kWRotor speed: 90 ber of knives: 14 pieces 2 piecesType and size of knives: concave / 40 x 40 mm, reversible cutting crownsconcave / 30 x 30 mm, broaching knivesScreen perforation: 15/20 mmPaint finish: frame in RAL 5010, hopper in RAL 7016(HoKuTech standard paint finish)Connected load: 400 V /- 5 % / 50 Hzincluded:Switch cabinet (Rittal) with 5 m cableElectrical control (PLC Siemens)Star-delta startRubber oscillating elementsE-rotor with knife pockets milled into the profileGear limit switch1. Knife rowHold-down device on pusher for long and large partsLarge 40 x 40 mm knives for optimum material feedVery robust gearboxSpecial broaching knives to prevent lateral jammingMachine number: 510-5238

Condition: used, Year of construction: 1989, with positioning control and Tersa cutterblockcleaned, function tested, test run- machine lubricated- test run- infeed rollers renewed- outfeed rollers renewed- rubber lip front and rear renewed- test planingspare parts:Panhans feed rollers, overhauled controlused, good conditionmake Panhanstype 435year of construction 1989Masch.-Nr. 170GS-testedmotor 5,5 kW / 0,25 kWplaning width approx. 510 mmplaning height approx. 250 mmlink pressure beamrubber infeed rollerrubber outfeed rollerfeed 7/14 m/ber of knives 4 piecesknife systemTersa reversible kniveselectric height adjustmentautomatic positioning controlsound insulationexhaust connection D 160 mmspace requirement approx. 1100 mm x 1200 mm x 1200 mmweight approx. 950 kgtotal connected load approx. 5,75 kWstorage location 97447 Gerolzhofen, free on truck, unpackeddelivery in as-is condition as viewed,without warranty and guarantee Bjdpfx Adevwfbiodslr