Andritz Hydro GmbH

Condition: ready for operation (used), Switch Testing Device Iijdjx I Ef Uspfx Ac Ask - 3x test stations for appliance switch testing - Voltage: 0–600V AC / DC - Current rating: max. 40A - Operation of test switches via pneumatic cylinders - Testing with resistive and inductive loads according to EN 61058 (VDE 0630) - 1x thermal chamber (oven) for testing at ambient temperatures up to 125°C - Testing of appliance switches with rated data 250Vac / 16(4)A / 125°C Buyer responsible for disassembly!

Condition: like new (used), functionality: fully functional, power: 18 kW (24.47 HP), Year of construction: 2010, There is a total of 6 pumps and motors sat on there own subframes as show in the pictures one of these pumps is a reverse for returning water or clearing the lines 5 are rated to 200bar maximum roughly 70 litres per minute on an 18wk motor and reverse pump with a max bar pressure of 20 bar with a flow rate or 200 litres per minute with a 7kw motor as current set up both could be change to up the flow rate Iisdsx Ilrnspfx Ac Ajk

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, conveyor belt length: 3,100 mm, conveyor belt width: 2,200 mm, total length: 3,100 mm, total width: 2,200 mm, power: 3 kW (4.08 HP), We offer this very good Blackman and White Versatech Cutting Machine, year of construction 2017. Iijdpox Ik Dcefx Ac Aok 2.2 x 3.1mtr conveyorised bed, with on board 3kw water cooled router and drag knife, with iCut camera registration system. Can be seen fully working and tested in Leicester UK. Price is ex works, we can put you in touch with the engineer who will provide a seperate and direct cost to move the machine. If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2010, condition: ready for operation (used), -Voltage 400V. -Installed power 10.90Kw. -Temperature range from -25 to +100C. -Humidity range from 20% to 98%. Iedpfx Acsx Icz Hs Ajik -Interior dimensions 970x950x960mm. -2 shelves. -Weight 900kg. -Year of construction 2010.

Year of construction: 2024, condition: new, functionality: fully functional, Electric vaporizer Capable of vaporizing liquefied gas at any temperature. We utilize these units to vaporize liquid CO2 and store it in concrete. It can also be used for other applications, such as vaporizing nitrogen, oxygen, or other gases for use in end processes. New price 140,000 CHF. Iodpfjx H R Ryjx Ac Ajik

Year of construction: 2018, condition: ready for operation (used), Offered is a cleaning system for assemblies in electronics manufacturing: Functions: injection flooding with compressed-air support, vacuum drying, 100% recirculation (closed loop), MPC-cleaner compatible. Technical data: cleaning tank 80L, rinsing tanks 2x 60L. Stainless steel construction. Dimensions X/Y/Z: approx. 1600mm/1000mm/2000mm, weight: approx. 700kg, including operating manual, data sheet, CE declaration. Viewing possible by arrangement. Isdpfox Hff Esx Ac Aeik

Condition: used, Storax 12t Iijdpex Ha Tqefx Ac Ajk Immediately available

Condition: ready for operation (used), functionality: fully functional, total height: 2,100 mm, table height: 1,100 mm, total width: 600 mm, total length: 8,000 mm, OPM venetian blind production line for sale. Automated punching, slat collection, threading. Additional manual manufacturing tools included as a bonus (cornice punch, end bar punch, etc.). Iisdpex E U E Sofx Ac Ask

Condition: excellent (used), Year of construction: 2022, operating hours: 95 h, functionality: fully functional, For sale: Complete industrial microwave generator system from MUEGGE GmbH (Germany), 30 kW at 915 MHz, in excellent condition with very low operating hours. This package includes the full WR975 high-power waveguide assembly, making it ideal for industrial heating, drying, food processing, chemical applications, and R&D environments. Technical Specifications Microwave Power Supply: • Output power: 30 kW • Frequency: 915 MHz • Input: 3 × 400 VAC, 50 Hz • Control interface: CAN • Colour: RAL7035 • Included: 10 m CAN cable Magnetron Head: • Power rating: 30 kW / 915 MHz • Waveguide interface: WR975 Included Waveguide Components: • 100 kW circulator, WR975 • WR975 waterload • Detector diode (for forward/reflected power monitoring) • 20 dB attenuator, Type R 412 720 Documentation: • Complete English instruction manual and technical documentation provided on USB stick. Condition: • Excellent – barely used • Fully functional and tested • Located in France • Ready for immediate dispatch Applications: • Industrial microwave heating • Drying and dehydration processes Iedpfx Asx Ex Drec Asik • Pasteurisation and food treatment • Chemical and materials processing • Research and development Original New Price: • €109,000 (manufacturer reference) Asking Price: • Negotiable, subject to shipping and inspection

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 65020107, Equipment: documentation/manual, I am offering an unused BVP 65 vacuum laminating press, E /380 Biedermann - 115x175 cm. It was used for picture framing. The machine can laminate graphics, posters, drawings, photographs, silk, and batik. The image is mounted onto cardboard or MDF inside the machine using heat and pressure. At the same time, a laminating film is applied on top of the image. The finished product is then protected not only against dirt but also against UV radiation, and is overall very lightweight. The lamination surface can be smooth, or textured with a canvas structure. Images with a coarse texture look like they are painted on canvas. Various laminating films are included in the price - see photos. The vacuum press is in good technical condition. Isdox Dq A Iopfx Ac Asik

Year of construction: 2021, condition: excellent (used), functionality: fully functional, Automatic rewinder for foam. A machine designed for winding elastic materials such as PUR foam, polyester foam, latex. It consists of an unwinding unit and a winding unit. The machine has been adapted to wind a foam roll from a cut foam block. Wound foam rolls are used in different industries such as mattress manufacturing, footwear, and clothing production, among others. The machine is fully automated. It allows you to wind a specified number of running meters per roll. The number of meters depends on the thickness of the material. Thanks to special dispensers, the machine precisely handles winding a set number of meters of any flexible material (such as PUR foam). Maximum roll width is 220 cm. Diameter of the finished roll is approx. 100 cm. The material is wound onto a 63 mm diameter cardboard core. Machine dimensions: 650x350x165 cm. Power: 2 kW. Very low noise level, around 69 dB. Isdpfx Asx Dkinec Asik For those interested, please contact us. The machine is in very good condition with very few operating hours.

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: SKF29452E, outer diameter: 480 mm, Industrial spherical roller thrust bearing SKF Explorer 29452 E SKF 29452E SKF29452E Iijdpfx Aoxz Rz Sec Aek Bearing SKF 29452E EAN 7316576613395 Brand new, factory-sealed bearing, physically in stock. Technical specifications Inner diameter (mm): 260 Outer diameter (mm): 480 Width (mm): 132 Weight (kg): 105.00 Code designation: 29452 E Type: Spherical roller thrust bearings Manufacturer: SKF Country: SE Sweden Availability: Shipping within 24h Minimum order (pcs): 1 Item EAN number: 7316576613395 Own transport available.

Year of construction: 2025, condition: new, Our heavy-duty hammer mill is engineered for efficient crushing and high-capacity processing. Built with durable steel construction and optimized rotor design, it ensures outstanding performance with low energy consumption. Iijdsxy Agqjpfx Ac Ask We offer custom manufacturing options depending on your required capacity, material hardness, and application. For detailed pricing, technical specifications, or bulk orders, feel free to send us a message. We provide fast production, reliable customer support, and worldwide shipping.

Condition: excellent (used), Year of construction: 2018, operating hours: 19,394 h, functionality: fully functional, machine/vehicle number: 2522027, travel distance X-axis: 2,500 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 1,250 mm, total length: 5,900 mm, table length: 2,500 mm, table width: 2,500 mm, total width: 6,139 mm, total height: 5,980 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 50 m/min, distance between stands: 3,225 mm, table load: 4,000 kg, workpiece weight (max.): 16,000 kg, rotational speed (min.): 1 rpm, rotational speed (max.): 15,000 rpm, distance table center to spindle nose: 1,500 mm, tool weight: 8,000 g, Equipment: rotational speed infinitely variable, Control: Heidenhain TNC640 Number of controlled axes: 5; simultaneous Commissioned: 2019 Spindle run time (h): 12,629 Tool holder: HSK 100 Tool changer: 30 positions Linear motor Internal coolant supply (IKZ): 65 bar incl. chip conveyor incl. special operator panel Iisdpfexx Svxsx Ac Aek

Condition: ready for operation (used), Year of construction: 2012, Cabin spraying system (KSA) manufactured by HEGE GmbH, year 2012, consisting of: Spray booth 1+2, type 02-1000, dimensions: L=5355 mm; W=2900 mm; H=2850 mm Cooling zone 1, type 04-1000 / 04-2000, dimensions: L=3740 mm; W=3200 mm; H=3800 mm Spray booth 3+4, type 02-3000, dimensions: L=4605 mm; W=2900 mm; H=2850 mm Iodpfjxvpi Rex Ac Ajik Cooling zone 2, type 04-3000 / 04-4000, dimensions: L=4675 mm; W=3200 mm; H=3800 mm Passive bearing station, type 08-000d, dimensions: L=3266 mm; W=2086 mm; H=2500 mm Included: Thermal post-combustion unit ENVIROTEC CNV 5.0GH, year 2012, SN: ST7190, including heat exchanger for preheating paints (exhaust gases are incinerated).

Condition: like new (used), Year of construction: 2024, operating hours: 10 h, Self-propelled washer for photovoltaic farms, 3.5 m brush, Mazaka brand, demo machine from 2024 – PROMOTIONAL OFFER This is the self-propelled version of Mazaka’s series of photovoltaic panel cleaning machines. Engine: Diesel Stage III, Power: 55 kW Brush length: 3.5 m Brush diameter: 300 mm Brush speed: 120–150 rpm Tank capacity: 2,000 L Iodpfx Acsxuu U As Aoik Travel speed: 1.5 km/h Battery: 12–24 V Optional features: • Automatic leveling • Water softener • Water heater • Stage V engine • Cabin PROMOTIONAL PRICE including delivery to customer in Poland and on-site training 85,000 EUR net

Condition: new, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, position of the milling head: mittig, spindle speed (max.): 60,000 rpm, total height: 1,550 mm, total length: 1,870 mm, total width: 1,040 mm, rotational speed (max.): 60,000 rpm, type of input current: three-phase, overall weight: 560 kg, working range: 420 mm, year of last overhaul: 2025, warranty duration: 12 months, drive type: Linearmotor, Equipment: rotational speed infinitely variable, Semi-automatic depaneling / basic machine with parallel shuttle The dynamic depaneling machine LOW 4322 RD is especially suited for medium to high product volumes and meets growing demands in the production process. Printed circuit board blanks of various materials are separated using low-dust and low-stress sawing and milling techniques with maximum product flexibility, precision and throughput. Highly dynamic linear motor axes, tools and grippers meet the highest quality requirements and guarantee the depaneling machine a long service life and high reliability. Semiautomatic depaneling - solutions on demand The LOW 4322 RD depanelling machine enables fast product changeover while maintaining short depanelling and handling times. The blank printed circuit board is inserted with a parallel shuttle, picked up and fixed with pin clamping technology and, if necessary, in combination with vacuum suction cups. Made in Germany The machine is equipped with: - a shank and slice tool separation module on Z-axis (automatically rotatable 0-90) - X-Y cross table module in linear motor technology with high-resolution measuring system - 2-compartment loading module built as parallel shuttle, separated left and right with sliding doors - profil frame with two maintenance doors - left and right. ESD - standard vision system base module for teach-in programming - Working area is 420 x 330mm - Automatic cutter length processing - Remote maintenance/support via remote connection - Touch IPC with Windows 10 Pro operating system - Laser axis measurement incl. protocol - Air ionization Iiedext Dk Repfx Ac Ajk - Cutter breakage control for end mills only - Preparation for vacuum clamping technology - disc and sliding doors ESD conform Optionally a vacuum cleaner unit can be offered later.

Condition: new, functionality: fully functional, Year of construction: 2025, actuation type: electric, Nitrogen Gas Production Capacity 30 Nm3/H Nitrogen Outlet Pressure 200 BARG Nitrogen Gas Purity % 99.999 Hourly Energy Consumption 42 kWh Nitrogen Manifold Set 2 Pieces Iiedpfx Acexrcauo Ask

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 45 kg, total length: 600 mm, total width: 400 mm, total height: 690 mm, The LAS 22 is a compact tabletop unit with a small working area, ideally suited for small parts. Due to its small size, the unit is very practical and can be used anywhere. The device is very easy to operate without programming knowledge - Fiber laser 20 Watt (Optional: 30 Watt) - Laser class 1 - Wavelength 1064nm - Marking field size 110 x110mm - marking software EZCAD in German / English - Pilot laser (simple preview/contour) - Focus finder (simple focusing) Iedpfsxqhnzox Ac Ajik - Max. Component height approx. 95 mm - Grid holes for fixtures - Clamping area 310x190mm - Electrically adjustable Z-axis - Electric door with anti-trap protection - optional: exhaust system (incl. activated carbon filter) - Welded steel plate construction - Connection 230V - Air cooled - Laptop with Windows operating system (German or English) - dimensions: LBH 600x 400x 690 mm - weight: approx. 45 Kg - low operating costs - marking of various materials

Condition: ready for operation (used), A high-cube industrial container including two control cabinets, a twin-shaft shredder, and various conveying and transport systems is available as a package offer. 1) Industrial container with double-side opening and base frame. Contents: screw press discharge unit, hopper, vacuum drum, vacuum pump Atlas Copco DZS 300V, condensation unit, and various auxiliary electric motors. 2) Control cabinet with Siemens Simatic S7-1500 control system, control panel: Siemens KTP 700. 3) Control cabinet with Siemens Simatic S7-300 control system. 4) Industrial twin-shaft shredder, rotor shafts: 2, motor/gearbox: Brevini/Dana. 5) Conveying and transport system with an attached feeding unit. The container, its contents, and all listed units are part of a package offer. An on-site inspection is possible. Iisdexpw T Repfx Ac Aek

Year of construction: 2025, condition: new, functionality: fully functional, Purity: 99.999 Iiodpfxoxn Upye Ac Ajk Capacity: 21.3 m3/h

Condition: excellent (used), Year of construction: 2016, Soma Bulldog die-cutter machine Iisdoxnl N Depfx Ac Ajk 75-90mm cutting die tools

Year of construction: 2018, condition: good (used), functionality: fully functional, in total 7 FMTM250-7HS-32P FUSEI mold presses, year of manufacture 2011-2018, and also some Fujiwa mold presses, vintage 2002-2005 available Iijdpfexniklox Ac Aek

Year of construction: 2024, condition: new, functionality: fully functional, machine/vehicle number: 0963, Oven used for sinter paste drying and subsequent cooling of printed half-bridges Iodpsxm Ri Hsfx Ac Ajik

Condition: refurbished (used), Year of construction: 2000, functionality: fully functional, 3 Station Extruder Machine 1100 m2 Coex Unit 2 stations operational Ijdpfjxl Ucbsx Ac Aeik Corona unit Non-stop large-size winder-unwinder 2 station coex, one station mono extruder This machine has been designed to be compatible with the TETRA PACK production line. Additionally, we offer PRINTING and SLIDING machines that can be seamlessly integrated into the process.