Feinmechanik

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Weiler C30 x 750 Precision Lathe (2007) Manufacturer: Weiler Model: C30 x 750 Year of manufacture: 2011 Availability: from April-May 2026 Condition: very good, used Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 160 mm Cross slide travel: 180 mm Bed width: 240 mm Tool shank cross-section: 20 x 20 mm Spindle nose according to DIN 55027 size 5 Spindle diameter at front bearing: 70 mm Spindle bore: 40.5 mm Main spindle internal taper: 5 mm Drive power 60%/100% duty cycle: 9/7 kW Total speed range: 1 - 4,500 rpm Longitudinal feed force: 6,000 N Cross feed force: 3,000 N Feed range: 0.001 - 10 mm/rev Rapid traverse (longitudinal/cross): 6/3 m/min Metric threads: 0.1 - 400 mm Inch threads: 56 - 1/4 TPI Module threads: 0.125 - 28 mm DP threads: 224 - 1 DP Max. number of thread pitches: 99 Quill diameter: 50 mm Lsdpfxsyw Tkde Adveri Quill stroke: 130 mm Quill internal taper: MT3 Length: 1,750 mm Width: 1,350 mm Height: 1,670 mm Weight: 1,300 kg Scope of delivery: - Collet chuck system - Multifix quick-change tool post - Machine lamp - Coolant system - Machine feet - Original documentation

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 5,000 rpm, travel distance X-axis: 250 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 635 mm, spindle motor power: 21,000 W, total height: 1,770 mm, total width: 1,715 mm, overall weight: 5,300 kg, product length (max.): 4,300 mm, number of axes: 4, This 4-axis DMG CTX410 was manufactured in 2008. It features a maximum turning length of 600 mm and a turning diameter of 320 mm. The machine is equipped with a powerful spindle capable of reaching speeds up to 5,000 rpm and includes a turret with 12 positions for enhanced productivity. If you are looking to get high-quality turning capabilities, consider the DMG CTX410 horizontal turning machine we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): 24 / 10 / 30 m/min • Main spindle: • Spindle bore: 87 mm • Bar capacity: 65 / 75 mm • Max torque: 240 Nm • C-axis: • Speed: 200 rpm • Torque: 200 Nm • Indexing accuracy: 0.04° • Turret: • Stations: 12 • Tool holder: VDI 30 • Driven tools: Yes (all 12 positions) • Driven tool speed: up to 4,000 rpm • Turning capacity: • Max turning length: 600 mm • Max turning diameter: 320 mm • Equipment: Tailstock Lrsdpfoyw Rb Hox Advei • Electrical: • Total power: 44 kVA • Voltage: 400 V • Frequency: 50 Hz Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 3,400 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 826 mm, spindle motor power: 22,400 W, number of axes: 3, This 3-axis HAAS ST-30Y horizontal turning machine was manufactured in 2022. It features a 10-inch chuck, a maximum cutting diameter of 13.75 inches, and a cutting length of 32.5 inches. The machine includes a 12-station BMT-65 turret and live tooling speeds up to 4,000 rpm. Y-axis capabilities allow for off-center milling, drilling, and tapping. Consider the opportunity to buy this HAAS ST-30Y horizontal turning machine. Contact us for more information. • Chuck size: 10 in (≈254 mm) • Maximum bar capacity (through spindle): 3 in (≈76 mm) • Maximum part swing over front apron: 31.75 in (≈806 mm) • Maximum cutting diameter: 13.75 in (≈349 mm) using BMT65 turret • Maximum cutting length: 32.5 in (≈826 mm) • Rapid traverse: X 472 in/min (~12 m/min), Y 472 in/min (~12 m/min), Z 945 in/min (~24 m/min) • Spindle bore: 3.5 in (≈88.9 mm) • Maximum torque: 300 ft-lb @ 500 rpm (≈407 Nm) • Turret: 12-station BMT65 • Live tooling speed: up to 4,000 rpm • Y-axis capability: off-centre milling, drilling, and tapping Lrsdoyw N Dtepfx Advji • Coolant capacity: 55 gal (~208 L) • Air requirement: 4 scfm @ 100 psi (~113 L/min @ 6.9 bar) • Electrical: 3-phase, 195–260 V (region dependent) • Footprint: 151 in × 70 in × 79 in (without conveyor) Additional equipment • Powered (live) tool holders • Various tool holders • Liners

Condition: good (used), Year of construction: 2009, functionality: fully functional, CNC Lathe TRAUB TNX 65/42 Year of manufacture: 2009 Control: Traub TX 8i-s TECHNICAL DATA - Number of spindles: 2 - Number of axes: 12 - Number of turrets: 2 MAIN SPINDLE - Spindle nose: A2-6 - Spindle drive power: 24 kW - Spindle speed: 5,000 rpm - Max. bar diameter: 65 mm Lsdpfx Aeyw H Szsdveri - Max. diameter of main spindle chuck: 175 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-5 - Spindle drive power: 28 kW - Spindle speed: 7,000 rpm - Max. bar diameter: 42 mm - Minimum C-axis resolution: 0.001° - Travel: 700 mm LEFT UPPER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel (X/Z): 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW RIGHT LOWER TURRET - Number of positions: 10 - Number of driven positions: 10 - Travel (X/Z): 175 / 650 mm - Travel Y: +/- 40 mm - Tool type: VDI 30 - Driven tool speed: 6,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total connected load: 95 kW WEIGHT AND DIMENSIONS - Footprint: 5,450 x 2,318 mm - Machine height: 2,258 mm - Machine weight: 10,000 kg ACCESSORIES - 3-color status indicator - Coolant tank: RESY * with high-pressure pump * with paper filter - Chip conveyor - Parts removal - Parts belt conveyor

Condition: new, Year of construction: 2025, functionality: fully functional, turning diameter: 170 mm, spindle bore: 45 mm, spindle speed (max.): 6,000 rpm, ⚡ DN SOLUTIONS DOOSAN – 2024 MODEL – UNUSED ✔️ 8 UNITS ✔️ Model: LYNX2100GA ✔️ Year: 2024.06 * 2 , 2024.12 * 6 ✔️ Chuck: 6” ✔️ Machining length: 330 mm ✔️ Machining diameter: 170 mm ✔️ Spindle bore: 45 mm ✔️ Spindle power: 18.5 kW ✔️ Max spindle speed: 6000 RPM ✔️ Guideways: LINEAR guideways ✔️ Control: Fanuc ✔️ Conveyor: Belt-type ✔️ Operating hours: 0 Ljdpfjywy T Sox Advsri THE MACHINES ARE LOCATED IN OUR SOUTH KOREA WAREHOUSE. FOB PRICE INCLUDES PROFESSIONAL VACUUM PACKAGING. DISCOUNT AVAILABLE FOR BULK PURCHASES. Contact us for detailed photos, videos, and information – let’s talk and see how we can assist you. Muhammed Özkaya

Condition: ready for operation (used), Year of construction: 2018, spindle speed (max.): 5,000 rpm, travel distance X-axis: 175 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 380 mm, spindle motor power: 15,000 W, overall weight: 7,800 kg, controller manufacturer: FANUC, controller model: Series 31i-B 2, number of axes: 8, This 8-axis Citizen BNE-51MSY was manufactured in 2018. It features a maximum bar diameter of Ø 51 mm and a spindle speed of 5,000 min-1. The machine includes 12 turret stations and a slide stroke of 175 mm in the X1 direction. If you are looking to get high-quality turning capabilities, consider the Citizen BNE-51MSY horizontal turning machine we have for sale. Contact us for further details. • Maximum Bar Diameter (SP1): Ø 51 mm • Maximum Bar Diameter (SP2): Ø 42 mm • Spindle Speed (SP1/SP2): 5,000 min-1 • Spindle Motor (SP1): 15/11 kW (15min./cont) • Spindle Motor (SP2): 5.5/3.7 kW (15min./cont) • Turret Stations: 12 ST. (HD1) / 12 ST. (HD2) • Revolving Tool Motor: 2.2 kW • Revolving Tool Torque: 20 Nm • Revolving Tool Speed: Max. 6,000 min-1 • Slide Stroke (X1/Z1): 175 mm / 380 mm • Slide Stroke (X2/Z2): 145 mm / 175 mm • Slide Stroke (Y1): ± 40 mm • Slide Stroke (B): 450 mm • Rapid Feed Rate (X1/Z1): 18 m/min / 20 m/min • Rapid Feed Rate (Y1): 12 m/min • Power Supply Capacity: 44 KVA • Voltage: AC 200/220 V • Coolant Tank Capacity: 350 L Technical Specification Ledpeywy Shefx Adveri Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2003, spindle speed (max.): 4,000 rpm, travel distance X-axis: 160 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 390 mm, spindle motor power: 26,000 W, total height: 2,204 mm, total width: 2,128 mm, overall weight: 6,700 kg, controller manufacturer: FANUC, controller model: Series 18i-TB, product length (max.): 4,107 mm, number of axes: 4, This 4-axis Biglia B 470 YSM was manufactured in 2003. It features a maximum turning diameter over bed of 680 mm and a maximum turning diameter over carriage of 520 mm. The machine is equipped with two turrets, each with 12 positions, and a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the Biglia B 470 YSM horizontal turning machine we have for sale. Contact us for further details. • Rapid traverse: X 12 m/min; Z 20 m/min; Y 6 m/min • Main spindle: ASA 6" nose; 80 mm bore; 100–4000 rpm; 22–26 kW; max chuck 210 mm; collet DIN 6343 • Sub-spindle: ASA 5" nose; 56 mm bore; 100–4000 rpm; 5.7–7.5 kW; max chuck 165 mm • Turrets: 2 turrets; 12 positions each; bidirectional • Tooling: 20 × 20 mm tool size; 32 mm boring bar; 12 driven tool stations; 100–3000 rpm driven tools; 1.1–3.7 kW driven tool motor • C-axis: Direct (CS); 0.001° resolution; 80 rpm rapid • Turning capacity: Max Ø over bed 680 mm; max Ø over carriage 520 mm • Tailstock: No • Bar feeder: No • Coolant system: 180 L tank; 150 l/min pump; 0.75 kW pump power Additional equipment • Parts unloader • Not included: bar feeder Technical Specification Counter Spindle Yes Driven Tools Yes Lsdpfeywv A Nex Advsri

Condition: ready for operation (used), Year of construction: 1997, spindle speed (max.): 6,000 rpm, travel distance X-axis: 240 mm, travel distance Z-axis: 240 mm, spindle motor power: 15,000 W, number of axes: 4, This 4-axis Okuma LB15i-M was manufactured in 1997. It features a spindle speed of up to 6000 rpm and a spindle power of approximately 15 kW. The machine includes 5 motorized front tools and 2 radial tools, providing versatile machining capabilities. If you are looking to get high-quality turning capabilities, consider the Okuma LB15i-M horizontal turning machine we have for sale. Contact us for further details. • Turret positions: 12 • Driven tools: Yes (5 front + 2 radial) • Tailstock: No • Distance between centers: 500–1000 mm • Spindle nose: JIS A2-6 Lsdjywu Siopfx Advjri Technical Specification Counter Spindle No Driven Tools Yes

Condition: reconditioned (used), Year of construction: 2014, operating hours: 9,132 h, functionality: fully functional, spindle speed (max.): 10,000 rpm, spindle speed (min.): 200 rpm, spindle motor power: 3,700 W, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 32 m/min, type of input current: three-phase, overall weight: 1,750 kg, bar passage: 20 mm, Swiss-type CNC Lathe TSUGAMI B0206E-II TECHNICAL CHARACTERISTICS: Year of manufacturing: 2014 CNC control: FANUC series 32i-B Number of axes: 6 Rapid traverse rate X1 axis: 24000 [mm/min] Rapid traverse rate X2 axis: 24000 [mm/min] Rapid traverse rate Z1 axis: 32000 [mm/min] Rapid traverse rate Z2 axis: 32000 [mm/min] Rapid traverse rate Y1 axis: 15000 [mm/min] Rapid traverse rate Y2 axis:15000 [mm/min] Max. bar diameter: 20 [mm] Min. spindle speed: 200 [rpm] Max. spindle speed: 10000 [rpm] Increment C-axis: 0.001 [°] Spindle power: 3.7 [kW] Min. counter spindle spindle speed: 200 [rpm] Max. counter spindle speed: 12000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 2.2 [kW] Number of positions end attachment: 8 Number of positions guide bush holder 1: 5 Number of motorized positions guide bush holder 1: 3 Lodpfjywuwrjx Advsri Live tools speed guide bush holder 1: 8000 [rpm] Number of positions secondary operation: 8 Number of motorized positions secondary operation: 4 Live tools speed secondary operation: 8000 [rpm] Max. tool holder cross-section: 12 x 12 [mm] Working hours: 9132 [h] Weight: 1750 [Kg] EQUIPMENT INCLUDED: x7 live tool holders x1 rotary guide bush x1 parts catcher x1 parts conveyor belt x1 parts ejection device x1 chip conveyor x1 coolant tank x1 IEMCA ELITE 220 E / 32 XL bar feeder x1 fire protection system - to be inspected by the buyer through a certified organization x1 electrical transformer x1 3-color status light Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machines similar to Citizen, Nomura, Tornos, Miyano, Index, Traub, and Star lathes, as well as machining centers, milling machines, and grinding machines.

Condition: good (used), Year of construction: 2012, turning diameter: 120 mm, Machine type: NZX-S1500/500 Manufacturer: MORI SEIKI Year of manufacture: 2012 Ljdpfx Adeywcbxjveri Control: F31iA Short description: Turning center with 2 turret heads for shaft machining

Condition: ready for operation (used), Year of construction: 2010, spindle speed (max.): 3,000 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 1,283 mm, spindle motor power: 5,500 W, total height: 2,000 mm, total width: 1,195 mm, overall weight: 8,000 kg, controller manufacturer: FANUC, product length (max.): 2,950 mm, number of axes: 3, This 3-axis YCM GT-300LMB was manufactured in 2010. It features a maximum spindle speed of 3000 rpm and a chuck size of 12 inches. The machine offers an X-axis travel of 275 mm and a Z-axis travel of 1283 mm, making it suitable for various turning applications. If you are looking to get high-quality turning capabilities, consider the YCM GT-300LMB horizontal turning machine we have for sale. Contact us for further details. • Spindle bore: Ø100 mm • Chuck size: 12 in Technical Specification Counter Spindle No Lredpjyv E Irefx Advsi Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,000 h, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, controller manufacturer: SIEMENS, controller model: 840D Solution Line, number of axes: 4, This 4-axis SPINNER TC800 was manufactured in 2009. It features a radial turret and is equipped with Siemens control, ensuring reliable operation. With approximately 1,000 operating hours, this machine has been barely used. If you are looking to get high-quality turning capabilities, consider the SPINNER TC800 horizontal turning machine we have for sale. Contact us for further details. • Control: Siemens 840D Solution Line • X-axis travel: approx. 360 mm • Z-axis travel: approx. 980 mm • Rapid traverse X-axis: approx. 18 m/min • Rapid traverse Z-axis: approx. 24 m/min • Main spindle speed: up to approx. 4000 rpm • Main spindle power: approx. 24 kW (100%) • Main spindle power: approx. 33 kW (40%) • Spindle nose: A8 • Bar capacity: approx. 77 mm • Counter spindle: Yes • Counter spindle speed: up to approx. 5000 rpm • Counter spindle power: approx. 15 kW • Counter spindle spindle nose: A6 • Counter spindle bar capacity: approx. 52 mm • Tool turret type: VDI 50 • Number of tool stations: 12 • Driven tools: Yes • Number of driven tools: up to 12 • Driven tool speed: up to approx. 4000 rpm • Maximum turning diameter: approx. 500 mm • Maximum swing over bed: approx. 800 mm • Maximum turning length: approx. 800 mm • Tailstock: Yes • Tailstock taper: MK4 • Tailstock stroke: approx. 100 mm • Tailstock force: approx. 8500 N • Voltage: 400 V • Frequency: 50/60 Hz • Control voltage: 24 V DC • Compressed air pressure: approx. 6–10 bar • Hydraulic pressure: approx. 70 bar • Chip conveyor: Yes • Coolant system: Yes • Hydraulic unit: Yes • Electrical cabinet: Yes • Radial turret • No quill • Barely used, approximately 1,000 operating hours Technical Specification Counter Spindle Yes Driven Tools Yes Lrsdpfx Adjyv Epvevsi

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, We are selling our Emco 342 TC, which is in excellent condition, due to a new purchase. (Main switch ON only 45,500 operating hours.) The machine was mainly used for manufacturing plastic prototypes. The machine is equipped with Siemens modules (not Indramat or Baumüller). Specifications: CNC Lathe EMCO 342 TC Year of manufacture: 1996 CNC control: Sinumerik 810 T Turning diameter: 340 mm Distance between centers: 255 mm Lsdpfx Adoyv Dq Eovjri Hydraulic tailstock Sauter turret with 8 stations Spindle bore: 42 mm Infinitely variable spindle speeds: 0 – 6,000 rpm Accessories: Interface for bar feeder 8 VDI30 tool holders 4 wedge clamps, including mounting hardware The machine can be inspected and tested under power by appointment.

Condition: ready for operation (used), Year of construction: 2006, operating hours: 38,407 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 650 mm, spindle motor power: 26,000 W, total height: 2,900 mm, total width: 2,500 mm, overall weight: 12,000 kg, controller manufacturer: SIEMENS, controller model: 840 Powerline, product length (max.): 7,855 mm, number of slots in tool magazine: 24, number of axes: 3, This 9-axis Gildemeister TWIN 65 was manufactured in 2006. It features a spindle power of 65 kVA and a maximum spindle speed of 5000 rpm. The machine includes a tool magazine with 24 tools and a turret-type tool changer. With a robust weight of 12,000 kg and dimensions of 7855 mm x 2500 mm x 2900 mm, this horizontal turning machine is equipped with special features like a touch probe and internal coolant supply. If you are looking to get high-quality turning capabilities, consider the Gildemeister TWIN 65 machine we have for sale. Contact us for further details. • Electrical connection/total power: 65 kVA • Tool holder: VDI 30 • Tool changer type: Turret • Configuration: Multi-slide turning center with Slide 1 (Top), Slide 2 (Bottom), and Slide 3 (Counter spindle) • Axes travels: Lodpjyvz Ibefx Advsri • Slide 1 (Top): X1 (Cross) 300 mm; Z1 (Longitudinal) 650 mm; Y1 (Vertical) ±40 mm (only on version with Y-axis) • Slide 2 (Bottom): X2 (Cross) 180 mm; Z2 (Longitudinal) 650 mm • Slide 3 (Counter spindle): X3 (Transverse) 175 mm; Z3 (Longitudinal) 670 mm • Counter spindle: max speed 5000 rpm; power 26 kW (40% ED) / 21 kW (100% ED) • C-axis: Integrated for oriented stopping and contouring • Driven tools: 12 stations per turret; all 12 stations capable of driven tools; max power 11.7 kW; speed up to 4000 rpm Additional equipment • Touch probe • Chip conveyor • Internal coolant supply Technical Specification Taper Size VDI 30 Counter Spindle Yes Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2008, spindle speed (max.): 4,500 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 950 mm, spindle motor power: 72,000 W, controller manufacturer: SIEMENS, controller model: Sinumerik 840D, number of axes: 4, This 4-axis BOEHRINGER NG-200 horizontal turning machine was manufactured in 2008. It features a maximum speed of 4500 rpm and a swing diameter of 290 mm. The machine is equipped with two turrets, each capable of holding 12 tools, providing versatility for various turning applications. If you are looking to get high-quality turning capabilities, consider the BOEHRINGER NG-200 machine we have for sale. Contact us for further details. • Machine configuration: 2 turrets at the top (boven 2 revolvers) • Drive power (100% ID): 60 kW (2 × 30 kW with counter spindle) • Drive power (40% ID): 72 kW (2 × 36 kW with counter spindle) • Drive torque (100% ID): 300 Nm (2 × 200 Nm with counter spindle) • Drive torque (40% ID): 360 Nm (2 × 240 Nm with counter spindle) • Spindle bore: 65 mm • Spindle diameter (front bearing): 120 mm • Spindle nose (DIN 55026): A6 • Chuck diameter: 200–250 mm • Swing diameter: 290 mm • Resolution Z-axis: 40 nm (2 nm interpolated) • Rapid traverse speed Z: 25 m/min • Max. feed force Z: 8,000 N • Distance between main and counter spindle: max. 1034 mm • Max. torque C-axis (left/counter spindle): 200 Nm • Max. speed C-axis (left/counter spindle): 300 rpm • Input fineness C-axis: 0.001° • Number of tools per turret: 12 • Max. driven tools per turret: 12 • Drive power driven tools (100% ID): 5 kW • Drive torque driven tools (100% ID): 20 Nm • Speed range driven tools: 1–4000 rpm • Coolant pump capacity (machine with two turrets): 80 l/min • Hydraulic pump capacity (machine with two turrets): 19 l/min Lredpfxjyvvd Rs Advei • Electrical connection load (machine with counter spindle): 85 kVA • Control unit: Height-adjustable operating panel with 10.4" TFT display • Controller: Siemens Sinumerik 840 D Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2018, operating hours: 15,845 h, functionality: fully functional, machine/vehicle number: S6E182501, spindle bore: 65 mm, spindle speed (max.): 5,000 rpm, spindle motor power: 22 W, The machine is very well maintained, with 90% of its operation carried out by a single user. Serviced according to the manufacturer's recommendations. Lrjdpfx Adoyvtugevei

Condition: used, Year of construction: 2005, MAZAK QT6 Lrodoyvr Hzspfx Advoi year 2005 Kitagawa B205 chuck 8-position turret spindle bore 32 mm max diameter 130 mm max turning length 195 mm included with the machine: documentation chip conveyor sump with pump

Condition: ready for operation (used), Year of construction: 2023, spindle speed (max.): 4,500 rpm, travel distance X-axis: 210 mm, travel distance Z-axis: 560 mm, spindle motor power: 18,500 W, total height: 1,920 mm, total width: 1,560 mm, overall weight: 4,000 kg, controller manufacturer: FANUC, controller model: 0i-TF PLUS, product length (max.): 2,643 mm, number of axes: 3, This 3-axis SMEC SL2000M (B TYPE) was manufactured in 2023. It features a maximum turning diameter over bed of 510 mm and a turning length of 540 mm. The machine is equipped with a hydraulic 3-jaw chuck and a spindle speed of up to 4,500 rpm. If you are looking to get high-quality turning capabilities, consider the SMEC SL2000M (B TYPE) horizontal turning machine we have for sale. Contact us for further details. • Type/Configuration: CNC turning center with C-axis and live tooling; 12-station turret (24 positions); programmable tailstock; no sub-spindle • Capacity: • Max turning diameter over bed: 510 mm • Max turning diameter over/on carriage: 360 mm • Max turning length: 540 mm • Bar capacity: 68 mm • Spindle: • Nose: A2-6" • Hydraulic chuck size: 200 mm • C-axis: continuous • Axes/Travels: • Axis motor power (X/Z): 1.8 / 3.0 kW • Guide inclination: 45° • Rapid traverse and ballscrews: • X rapid: 24 m/min; ballscrew Ø28 mm • Z rapid: 30 m/min; ballscrew Ø40 mm • Turret/Tooling: • Stations: 12 (24 positions) • Interface: BMT55 • Driven tool power: 3.7 / 5.5 kW • Driven tool speed: 5,000 rpm • Indexing time: 0.15 s • External tool size: 25 × 25 mm • Internal tool size: Ø40 mm • Tailstock: • Taper: CM4 • Body travel: 450 mm • Quill Ø: 75 mm; travel: 80 mm • Thrust: 5,047 Nm • Coolant system: • Tank capacity: 185 L Lsdjyvqndjpfx Advori • Pump power: 0.5 kW • Flow: 20 L/min • Pressure: 5 bar • Electrical: • Power requirement: 31 kVA • Voltage: 380 V ±10%, 3-phase • CNC/Control: • Fanuc 0i-TF PLUS, axes: X, Z, C • Display: 10.4" LCD • Interfaces: USB, Ethernet, RS232 • Functions: rigid tapping Additional equipment • Hydraulic 3-jaw chuck Ø200 mm • Chip conveyor • Tool presetter • Tool holder set: • 2 axial driven tools • 2 radial driven tools • 1 tilting driven tool ER16 • Industry 4.0 package: • CNC data monitoring capability • Remote monitoring via FOCAS libraries • Production data interface • Also included: automatic lubrication system, coolant system, work lamp, electrical cabinet with heat exchanger Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2021, spindle speed (max.): 6,000 rpm, travel distance X-axis: 205 mm, travel distance Z-axis: 340 mm, overall weight: 3,100 kg, number of axes: 2, Horizontal turning machine manufactured in 2021. This DOOSAN Lynx 2100A features a maximum turning diameter of 350 mm and a turning length of 330 mm. It is equipped with a spindle speed of 6,000 rpm and a chuck size of 6” (160 mm). If you are looking to get high-quality turning capabilities, consider the DOOSAN Lynx 2100A machine we have for sale. Contact us for further details. • Chuck size: 6" (160 mm) • Bar capacity through spindle: Ø52 mm • Max turning diameter: Ø350 mm • Max turning length: 330 mm • Rapid traverse (X/Z): 36 m/min • Tool size: 25 x 25 mm (OD), Ø32 mm (ID) • Turret: 12 stations, tool change time 0.15 s • Tailstock: Programmable with rotating tip • Options/features: Doosan tool load monitoring system; Automatic tool setting; High‑pressure coolant 7 bar (1.1 kW); Oil separator; Electrical noise suppression; Bar feeder preparation • Certification/Power: CE certification; Transformer • Operating hours: 2,898 h Additional equipment • Basic tool holder set • Oil mist extractor • Chip conveyor Lrjdpfoyvqinsx Advsi • Workpiece collecting box (parts collection) Technical Specification Counter Spindle No Driven Tools No

Condition: used, Year of construction: 1990, turning length / mm control / centre height / mm CNC Turning Center MAZAK MULTIPLEX 420 For sale: CNC turning center Mazak MULTIPLEX 420 with 2 spindles and 2 turrets. Ideal for series production and complete machining. Accessories: Comes with a large set of accessories (see pictures). Machine in good condition. Inspection possible by appointment. Lredjyvkw Eepfx Advoi Feel free to get in touch if interested.

Condition: used, Year of construction: 1995, turning length / mm Lsdpfxoyvkv Is Advori control / centre height / mm MAZAK MULTIPLEX 620 MARK II CNC turning and milling center including FLEX-GL100N portal loader with two spindles and two turrets

Condition: excellent (used), Year of construction: 2004, - Synchron - C axis - Transmit function - Polygon device/thread milling cutter - 1 rear driven unit - Iemca Master 880 bar feeder, year 2004 Ledpfx Aoyvkbdsdvori

Condition: defective spare-parts repository (used), Year of construction: 2006, functionality: not functional, 1 x CNC lathe Emco Turn 345 II, year of manufacture: 2006, control: Siemens Sinumerik 810 D, with Knoll chip conveyor. Offered as a spare parts donor/for dismantling. The Iemca bar feeder shown in the photos is not included in the offer. The machine shows the error indicated in the last photo. Additionally, the turret does not always lock when switched on. The machine can be inspected. Lrsdpfx Adsyvhqcovsi

Condition: ready for operation (used), Year of construction: 2002, travel distance X-axis: 345 mm, travel distance Z-axis: 995 mm, number of axes: 3, This 3-axis MORI SEIKI SL-403BMC/800 was manufactured in 2002. It features a maximum turning diameter of 650 mm and a maximum turning length of 863 mm. The machine offers an X-axis travel of 345 mm and a Z-axis travel of 995 mm. If you are looking to get high-quality turning capabilities, consider the MORI SEIKI SL-403BMC/800 horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 710 mm • Swing over cross slide: 738 mm • Max. turning diameter: 650 mm • Max. turning length: 863 mm • Distance between centers: 1,125 mm Technical Specification Counter Spindle No Driven Tools No Lrsdpfoyvf Sisx Advoi

Condition: used, turning length / mm control / centre height / mm MAZAK MULTIPLEX 420 CNC turning and milling centre, including FLEX-GL100 gantry loader, with two spindles and two turrets Lrodpfx Aeyu U Haodvji