SIWA Maschinenbau

Condition: used, Year of construction: 2010, machine/vehicle number: ET179, Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: Nwodez E Dl Aopfx Ab Uol The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were installed The printheads were overhauled All glue heating unit probes were replaced The suction unit hoses were replaced, and the entire electrical system was inspected Components and Functionality: Equipped with 25 plates, the Opera 400 uses a mechanical cam brake/clutch for plate movement to maintain precise synchronization at full speed. The label feed is roll-fed (coil). With 2 labeling stations, the machine supports continuous application while minimizing downtime. No. of plates25 Rotation direction0 Plate movement1 (mechanical cam brake/clutch) Number of stations2 Labeling method7 Label placement5 Optical centering system0 Head adjustment1 (manual) Optimization and Maintenance of Used Sacmi Labeling Machine: Manual head adjustment gives technicians direct control for fine-tuning, while automatic label adjustments reduce operator intervention during run. The 2025 refurbishment addressed wear parts and safety elements, supporting reliable uptime typical of bottle labeling equipment in high-throughput environments. Conclusion: Sacmi Opera 400 (2010), overhauled in 2025, combines 45,000 BPH throughput, roll-fed OPP application, 25 plates, and 2 stations with multi-format capability (500 ml, 1 L, 1.5 L). Ready for operation.

Condition: used, Year of construction: 2006, machine/vehicle number: ET236, Used SACMI OPERA labeller machine 200 RFTechnical Specifications & Performance DataThis rotary labeling machine is engineered for high-speed wrap-around labeling with hot-melt technology. Manufactured by Sacmi, the Opera 200 RF delivers robust performance for beverage production and industrial packaging applications, supporting second hand and used bottling line upgrades with reliable throughput.Model: Opera 200 RFMachine type: Rotary Labeling MachineProduction speed (max): up to 30,000 containers/hourCurrent bottle format: 1.0LContainer material: PETLabel type: OPP (oriented polypropylene), roll-fedApplication method: Hot glueReels: 2 with automatic reel changeMaximum reel diameter: 350 mmNumber of label magazines: 2Plate rotation: Cam-drivenWorktable height: 1200 mmElectrical supply: 400 V, 3 Ph + TInstalled power: 25 kWYear of manufacture: 2006Advanced Automation & Control SystemsEquipped with a Pro Face HMI, the Sacmi Opera 200 RF provides intuitive operator control, recipe management, and production monitoring. Mechanical cam-driven bottle plates ensure precise and repeatable label application at high speed. Automatic reel change allows uninterrupted operation during reel depletion, reducing downtime and maintaining production efficiency on a used bottling line.Pro Face operator interface (HMI) for clear diagnostics and settingsMechanical cam control for accurate bottle rotation and label alignmentAutomatic roll changeover to sustain continuous labelingClockwise carousel rotation for standard line layoutsIntegrated safeguards and interlocks for operator protectionProduction Line Integration CapabilitiesThis machine integrates seamlessly into beverage production environments as a standalone unit or inline with rinsing, filling, and capping machines. Designed for PET bottle handling, it interfaces with upstream and downstream conveyors and can be adapted to additional bottle sizes with appropriate format parts.Inline or standalone operation within packaging machinery layoutsDesigned for PET bottle handling in industrial packaging linesCurrent format 1.0L; adaptable to other formats via change partsOptimized for wrap-around OPP labels with hot-melt applicationMachine Condition & Maintenance HistoryThe unit is second hand, overhauled, and guaranteed. It is ready for operation with compatible spare parts available, providing confidence for rapid deployment into production.Ready for immediate useOverhauled and guaranteedWarranty: 6 monthsSupplied with compatible spare partsOperational Performance & VersatilityThe Sacmi Opera 200 RF is built for consistent, high-quality wrap-around label applica... Nsdpfxjz E Dlio Ab Uowl

Condition: used, Year of construction: 2013, machine/vehicle number: ET255, Used FUJI 410 sleeve applicator labeling machine for PET 10000 BPHTechnical Specifications & Performance DataThe Fuji Seal 410 DT-STH-DHA is an automatic linear sleeve labeling machine designed for the application of sleeve labels to PET bottles. Built in 2013, this high-performance unit reaches a maximum output of 10,000 bottles per hour, supporting efficient label application in industrial packaging and beverage production environments.Manufacturer: Fuji SealModel: 410 DT-STH-DHAYear of construction: 2013Maximum speed: 10,000 bottles per hourMachine configuration: LinearContainer material: PETCurrent bottle format: 2.0LLabeling method: Sleeve applicationMaximum reel diameter: Ø 500 mmWorking table height: 1200 mmAdvanced Automation & Control SystemsThe machine is equipped with a Siemens PLC for controlled and simplified operation. Its six-reel configuration and automatic reel changeover are designed to support continuity during production, reducing interruptions associated with reel replacement. Clockwise operating direction is specified for integration planning and conveyor layout.Siemens PLC control system6 label reelsAutomatic reel changeoverElectrical supply: 400V, 3 Ph+N+TElectrical rating: 16ACompressed-air pressure: 6 barProduction Line Integration CapabilitiesThis sleeve labeling machine can be positioned downstream of filling and capping equipment and upstream of secondary packaging machinery in a used bottling line. Its linear architecture is suitable for inline PET bottle handling and can be coordinated with conveyors, accumulation systems, inspection equipment, shrink wrappers, and palletizing equipment. The stated 2.0L format provides a defined basis for assessing bottle-handling components and change-part requirements.Automatic sleeve labeling is applicable to beverage production lines processing soft drinks, still water, sparkling water, milk, beer, wine, alcoholic beverages, oil, and preserved products. As with other industrial packaging machines, line synchronization should consider bottle stability, conveyor speeds, sleeve material, and downstream package requirements.Machine Condition & Maintenance HistoryThe machine is stated as ready for use, refurbished, and supplied with compatible spare parts. A 6-month warranty is indicated. This condition makes the unit suitable for operators seeking second hand bottling equipment intended for prompt integration into a production line. The machine is offered under an as-inspected sale condition.Operational Performance & VersatilityThe Fuji Seal sleeve labeling system is intended for accurate automatic application of sleeve labels on PET bottles. Sleeve labeling provides a versatile decoration solution for beverage production and industrial packaging, allowing bottle presentation to be adapted to product and brand requirements. The label magazine, six reel positions, and automatic changeover arrange... Nwsdpfoz E Dg Hsx Ab Uel

Condition: ready for operation (used), functionality: fully functional, Inkjet printer Date coding Linx Printing Technologies plc Type: Linx 8910 Nsdpszzlp Rofx Ab Uswl Price: €3000 For details, see photos; feel free to send a message for further information. Fully functional. Private sale, no guarantee and no warranty.

Condition: used, Year of construction: 2023, Offered for sale is a self-adhesive labeling machine. Nominal output: 11000bottles/h, reference circle diameter: 720mm, control range: 2000 to 12000bottles/h, number of container plates: 12, pitch: 188.4mm, starwheel diameter: 480mm, starwheel pitch: 8, number of self-adhesive labeling stations: 2, direction of operation: left-hand machine, control: touch panel. Equipped with infeed screw 1x, infeed/outfeed starwheel 1x, bottle plates 1 set, centering hoods 1 set, swivel arm, free-standing control cabinet. Inspection possible by appointment. Nedpfxezzdybe Ab Uewl

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 818745 / (PPS 2013- 001), This machine was updated in 2013 with a two-hand safety system. It is a semi-automatic machine that prints labels and presents them in a fixed position. The operator places the box in the fixture and presses the OK button with both hands for safety. Afterward, the label will be applied. The unit consists of an Allen printer 53XL80 and a table-top version – Herma 414 from 2011. The table height can be adjusted by pressing a button. The control system is integrated into the HERMA 400 labeler. Machine capabilities: Labeling of cartons. Output: max. 30 pcs./min. Nodpozx D I Tjfx Ab Uswl Size – Cartons (55 x 30 mm and 95 x 120 mm). Label specifications: Label size: 70 x 20 mm, 100 x 70 mm, 100 x 45 mm, 140 x 25 mm. Label specifications: K: Core diameter 76 mm R: Reel diameter max. 300 mm B: Label width max. 160 mm L: Label length max. 800 mm Label winding outside.

Condition: good (used), Year of construction: 2024, Labeling machine, Novexx – used: Price at location: €1,950.00 (net), including loading! Additional Novexx solution thermal ribbon Avery Novexx 64-04 A2817: €425.00 (net) per piece. Manufacturer: Novexx Year of manufacture: 2024 Type: A2817 Serial number: CLG22X-00063 R = 1348 Ohm PRINT PARAMETERS Print speed: 8.0 inches/s Feed speed: 8.0 inches/s Material type: Die-cut Material length: 143.0 mm Material width: 99.0 mm Print orientation: Front first Die-cut offset: 0.0 mm Nedpfx Aozxcdtob Uswl Barcode multiple: *1 UPC clear text: Bottom EAN clear text: Standard EAN separators: Only with clear text Rotated barcodes: Optimized Dispense mode: True 1:1 mode Dispense position: -5.0 mm X print offset: 2.4 mm Y print offset: 1.0 mm Die-cut mode: Automatic Die-cut threshold: 128 Condition: good Available: immediately Location: Erfurt area, later Frankenberg / Saxony warehouse

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Nedpszwntqjfx Ab Uewl Highest bid is subject to vendors approval. Please Note: This lot is located in Birmingham, UK. A charge of £300 for dismantling and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2023, A labeling system with two rotary tables and a scissor roller conveyor is offered. 1) Fully automatic Küppersbusch wrap-around pressure-sensitive labeling machine, type: ETT 5000-V, version for cylindrical containers with 3-roller system for front and back labeling, rated output: approx. 1200containers/h, bottle travel direction: right/left, bottle diameter range: 40mm-80mm, conveyor length: approx. 2500mm, conveyor width: approx. 82mm, conveyor height: 800mm +/-100mm, Küppersbusch ETT 4301/200 label dispenser, backing paper width: 30mm-200mm, label roll core: 76mm, max. label roll outside diameter: 280mm. 2) Küppersbusch infeed rotary table: diameter: 1000mm, version with V2A stainless-steel tubular frame and plastic plate. 3) Küppersbusch accumulation rotary table, diameter: 1000mm, version with V2A stainless-steel tubular frame and wear-resistant, noise-damping plastic plate. In addition, a total of four rollers for different bottle formats are available. The support rods of the opposed rollers were shortened for processing bottles with spray heads. The system was used only in single-shift operation. The system is available from January 2027. Documentation available. An on-site inspection is possible. Nsdpfxozv T Nbe Ab Uewl

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: J22143, total length: 5,200 mm, total height: 2,391 mm, type of input current: AC, outer diameter of label roll: 400 mm, inside diameter of label roll: 75 mm, overall weight: 800 kg, input voltage: 380 V, Performance specifications: Product: Minimum height 40mm Maximum height 330mm Maximum diameter 150mm Minimum diameter 15mm Nsdpfx Aszv S Rwjb Uswl Labels: Maximum outer roll diameter 400mm Inner roll diameter 75mm Maximum label width 150mm Application speed min 70 ppm Conveyor speed max (infinitely adjustable) 27.5 m/min min 7.5 m/min Dimensions Overall height 2391mm Length 5200mm Power supply Electrical 380V AC (three-phase) 50/60Hz, 4kVA Pneumatic 0.06 m3/min Protection class IP20 Parameter control via Allen Bradley PanelView Plus 700 Condition: Functional, professionally dismantled Note! System is sold without the Cognex camera system Further information available upon request

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, overall weight: 6,600 kg, year of last overhaul: 2025, Overhaul work 2025 - Lifting devices overhauled - Bottle carousel overhauled - Glue roller overhauled - Roller motor replaced - New protective covers installed - Printing heads overhauled - All sensors of the glue heating system replaced - Hoses of the extraction unit replaced - Entire electrical system inspected TECHNICAL DETAILS Output: 45,000 bottles/hour Bottle format: 500 ml, 1 l, 1.5 l Labeling system Labeling method: Roll-fed / roll labeling Label placement: Wrap-around labeling Rotation direction: Clockwise Carousel movement: Mechanical cam drive with brake/clutch Optical centering system: Mechanical Head adjustment: Manual Number of bottle carousels: 25 Number of labeling stations: 2 MACHINE DETAILS Mains voltage: 400 V Mains frequency: 50 Hz Power consumption: 35 kW Current consumption: 57 A Nsdpfxezv Rp Sj Ab Uswl Machine weight: 6,600 kg EQUIPMENT - Mechanical cam drive with brake/clutch for bottle carousel movement - Mechanical optical centering system - Manual head adjustment - Roll-fed labeling system for wrap-around labels - Two labeling stations - Safety guards

Condition: used, Year of construction: 2018, An automatic Altech labeling machine for labeling bags/pouches is offered. Conveyor belt width: 200mm, conveyor belt length: 1500mm, conveyor belt height: 1000mm +/-50mm, max. label width: 100mm, labeling: from above, max. dispensing speed: 30m/min, max. label roll diameter: 300mm, positioning accuracy: +/-1mm. Equipped with a stepper motor-driven label applicator, optical product detection, adjustable side guides, customized pressure rollers, counter and continuously variable conveyor speed with digital frequency inverter. Documentation available. An on-site inspection is possible. Nwjdpfx Abjzvgihj Uel

Condition: used, Year of construction: 2023, Labelling machine for the cold-glue application of paper front, back and belly labels onto glass bottles. Equipped with a Domino CO₂ laser for label marking. The labelling machine was upgraded in 2023 with a mechanical overhaul and a refurbishment of the electrical systems. Additional title: cold glue labeling Nwsdpfx Abezu Rzls Uol Capacity appr.: 60000 bo/h Current: 32 A Voltage: 400 / 230 V Frequency: 50 Hz Formats: 0.5 l Longneck Operation / Control: Simatic S7-1500 Position: in stainless steel housing on feet Base construction: carousel-type machine Features: label magazines; glue pumps; safety doors; control cabinet; operator terminal with visualisation

Condition: excellent (used), Year of construction: 2004, PALS Label applicator (Top apply) and conveyor - ready to operate Nodpfxszu Atae Ab Uewl

Condition: used, Rotary labeling machine, modernized in 2008 with a three-head self-adhesive labeling system. Manufacturer: PE Labellers Model: Universal 8T 3S 3E Nwodpfx Absztz Uas Uel Capacity: up to 4000 - 7000 bottles/hour Carousel: 8-station Configuration: 2 x UNILOGO S7 heads for self-adhesive labels (e.g., front + back) 1 x COLLAMAT 6610 head for applying labels, e.g., neck labels Original technical documentation. Technical condition: used machine, condition as shown in the pictures.

Condition: used, Year of construction: 1987, Labelling machine for applying neck, body and back labels to glass bottles. Additional title: with two glue aggregates Nominal capacity of filler: 15000 b/h Formats: breast-, body-, back-label / crown cap: 0,5 l-NRW-bottles, 0,33 l-Longneck-bottles / screw cap: 0,5 l-NRW-bottles Running direction: left -> right Features: 2 glue aggregates Nsdpfeztyy Iex Ab Uswl

Condition: used, Year of construction: 2011, Cold glue labelling machine for applying paper labels to glass bottles. Additional title: Neck-, body- and back-labeling for bottles Capacity: 4500 bottles/h Power: 6 kW Voltage: 400 Volt Frequency: 50 Hz Compressed air: 6 bar; 120 l/min Formats: 0.33 l longneck, 0.5 l Euro, crown cap, and 0.5 l, 0.75 l swing-top bottles Running direction: from right to left Operation / Control: Control cabinet with control buttons, automation with Siemens Simatic S7-300 Nodpfx Abjztwyxo Uowl

Condition: used, Year of construction: 2022, All-around labeling machine 132M HC Machine running direction: from left to right, as viewed from the operator side. Njdpfx Ajzr Uvzjb Uowl Machine structure, machine number 837121: - All-around labeling of cylindrical glass vials - Includes printing system and camera control - Working height: 850 – 1,000 mm - Machine length: approx. 4,665 mm - Rotary table - Format sets for 2R vials Further information available upon request. Additional demonstration machines are regularly available in our standard range. We would also be happy to invite you to our showroom to learn about the machines during a visit or live demonstration. Please feel free to bring your own products so that we can demonstrate the application in a practical way under your individual conditions.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: TE6110019, Semi-automatic tamper-evident label dispenser for applying tamper-evident labels diagonally to folding cartons with tuck-in flaps. Nsdpezqfu Ejfx Ab Uowl

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, PAGO System L600 Pharmaceutical Labeling Machine | Extensively modernized | GMP | Immediately available Manufacturer: PAGO Etikettiersysteme GmbH (Fuji Seal) Model: System L600 Year of manufacture: 2013 For sale is a high-quality PAGO System L600 labeling machine for the pharmaceutical industry. The machine is suitable for labeling vials, injection bottles, and other cylindrical containers in a GMP environment. The machine was already upgraded and modernized at the factory in 2018 to handle additional product formats. In 2022, we purchased the machine used and immediately took it to the manufacturer, Fuji Seal / PAGO Germany. There, it was completely inspected, serviced, and extensively modernized. Investments of €60,200 were made in these measures. Before delivery, a complete Factory Acceptance Test (FAT) was carried out at the Fuji Seal factory. The machine is in very good technical condition and is ready for immediate use. Equipment Laetus/Keyence vision system for print and code inspection New Allen / Novexx thermal transfer printer Siemens PLC control Touchscreen operation Unwinding station Outfeed station Servo drives Stainless steel GMP design Complete protective enclosure Original documentation Technical data Output up to 120 products/min For vials and injection bottles GMP-compliant design Year of manufacture 2013 Manufacturer: PAGO Etikettiersysteme GmbH Why is the machine being sold? For our new pharmaceutical CMO plant, we have purchased two new labeling machines. Due to space limitations, this machine is no longer needed. Advantages Extensive modernization by Fuji Seal / PAGO Documented investment of €60,200 Factory upgrade already in 2018 Nodpezpzbfefx Ab Uewl Complete FAT at the manufacturer Very well-maintained condition Immediately available Significantly cheaper than a new machine A comparable PAGO/Fuji Seal pharmaceutical labeling machine costs over €450,000 in 2026, depending on the equipment and automation. Inspection is possible at any time by appointment. We will gladly send you further photos, videos, and technical documentation upon request.

Condition: like new (used), Year of construction: 2023, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, We offer this Comag SLR 9/1 stretch sleeve machine, manufactured in 2023, in like-new condition. Machine type: SLR 9/1 Serial number: C023 Year of manufacture: 2023 Rated voltage: 380 V Phases / frequency: 3+N/50 Hz Rated current at full load: 17.5 A Peak current at start: 22 A Nodszmt Ncepfx Ab Uewl Current of the largest load: 4.8 A Interrupting capacity of the safety device: 15000 A Wiring diagram number: C023 If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: ready for operation (used), Year of construction: 2011, A Heuft rotary labelling machine is available. Throughput: approx. 36000bottles/h, labelling stations: 2, machine pitch: 120mm, carousel diameter: 1150mm, machine dimensions X/Y/Z: approx. 2500mm/2300mm/2500mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Njdpfx Ajzmh T Asb Uowl

Condition: ready for operation (used), Year of construction: 1987, A Krones rotary labelling machine with neck band is available. Labelling method: cold glue, containers: wine bottles/sparkling wine bottles, max. labelling capacity: 7000bottles/h, machine dimensions X/Y/Z: approx. 1650mm/1250mm/1700mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible. Nwsdpfezmh Srex Ab Uol

Condition: good (used), Year of construction: 2021, functionality: fully functional, 21x Logopak 410 VM90 industrial label applicators (print & apply) – manufactured in 2021 A total of 21 identical Logopak 410 VM90 print & apply labeling systems are for sale. The units were manufactured in 2021 and put into operation in a modern logistics center starting in 2023. The labeling systems are being sold due to a process change and/or facility modernization. The systems are in working and well-maintained condition and can be inspected by appointment. Technical data: Manufacturer: Logopak Model: 410 VM90 – T01P06 Year of manufacture: 2021 Voltage: 100–240 V AC, 50–60 Hz Current consumption: 8 A Condition: Used Functional CE marking present Scope of supply: Logopak 410 VM90 label applicator Control cabinet with operating panel Machine frame Signal lamp as shown in the pictures Notes: A total of 21 identical units are available. Sale individually or as a complete package is possible. Nwsdpfx Abezltq Ro Usl Inspection possible by arrangement. We will gladly send further photos and technical information upon request.

Condition: used, Caroussel-type labelling machine for applying paper labels to glass bottles using cold glue. Additional title: cold glue labelling for glass bottles; years of manufacture: 1996–2023 Capacity: 55000 bo/h Formats: 0.5 l NRW bottles Nwedpszi Al Eefx Ab Uol Material: housing from stainless steel Position: in a floor-standing cabinet on legs Base construction: caroussel-type machine Features: Protective enclosures with doors; label magazines; glue pumps; date coding (vector laser) with its own control panel featuring a touchscreen; control cabinet with touchscreens