Dht Sp. z o.o.

Condition: used, Year of construction: 2013, machine/vehicle number: ID: 152-013538, overall weight: 990 kg, load capacity: 2,000 kg, Used pillar slewing crane from ABUS, type VS, manufactured in 2013. The system is equipped with an ABUS GM 6 2000.5-2 electric chain hoist, manufactured in 2013, with a lifting capacity of 2,000 kg and an electric trolley. The electric chain hoist has two lifting speeds of 1.3 and 5.0 m/min and is designed for 400 V / 50 Hz. The equipment includes chain, hook, chain container, and pendant control. Condition: used, stored disassembled. Pjdo Agxafepfx Airerc

Condition: used, Year of construction: 2015, machine/vehicle number: ID: 152-016256, load capacity: 2,000 kg, Used pillar slewing crane from ABUS, type VS, manufactured in 2015. The crane has an outreach of approximately 3,000 mm and an overall height of approximately 4,250 mm and is equipped with a motorized slewing mechanism and an ABUS electric chain hoist mounted on an electric trolley. The confirmed scope of supply includes the crane column, slewing arm, electric chain hoist, electric trolley, hook block, pendant control, control cabinet, and festoon cable system. The hook block is marked with 2.0 t; however, the rated load capacity of the complete system has not been confirmed. Condition: used, stored disassembled. Psdj Agxabopfx Airorc

Condition: reconditioned (used), Year of construction: 1985, Hacker, factory-refurbished in 2023 for €7,500. Motor: 22 kW Prsde Agw U Nopfx Airec Equipped with 49 impact blades Throughput: 300 - 1500 kg/hour Screen hole size: 25 mm Operating hours: 7738 Infeed hopper: 90 x 90 cm With an additional hopper on top, measuring 1 x 1 m, total height: 265 cm.

Condition: used, empty load weight: 8,240 kg, axle configuration: 3 axles, first registration: 09/2018, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 2,69,149 km, Ref: F0840139 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Side impact protection, Prjdpj Agw Udofx Airjc * Lifting odometer, * Tool box: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Floor: Plywood floor, * Double-decking system, * Double-decking beams: 22, * Side walls with keyhole profile VIN: WKESD00000840139 Tire size: 385-65 R22.5 Internal length: 13.62 m Width: 2.55 m Internal width: 2.48 m Height: 4 m Internal height: 2.72 m

Condition: used, empty load weight: 8,116 kg, axle configuration: 3 axles, first registration: 10/2018, next inspection (TÜV): 01/2027, tire size: 385-65 R22.5-385-65 R22.5, Year of construction: 2018, mileage: 3,70,385 km, ref: F0840146 Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pole + 2 x 7-pole, Psdpe Agw Uhjfx Airsrc * ABS, * EBS, * Side impact protection, * Lifting odometer, * Toolbox: 1, * Spare wheel holder: 1, * Rear door design: Rear portal doors, * Locking bars on rear doors: 4, * Floor: Plywood floor, * Double-decking system, * Double-decking beams: 22, * Side walls with keyhole profile VIN: WKESD00000840146 Tire size: 385-65 R22.5 Internal length: 13.62m Width: 2.55m Internal width: 2.48m Height: 4m Internal height: 2.72m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 02/2027, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 5,46,252 km, ref: 55575 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting mechanism odometer, * Tool box: 1, Psdpfx Ao Agw Uljirsrc * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210867 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 2,33,617 km, ref: W0015560 Equipment: * Air connection: Red/Yellow connector, * Electrical connection: 1 x 15-pin + 2 x 7-pin, Pedpfxo Agw Upj Airjrc * ABS, * EBS, * Refrigeration unit, * Side impact protection, * Lifting odometer, * Tool box: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking rods on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210875 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: used, empty load weight: 8,418 kg, axle configuration: 3 axles, first registration: 02/2019, next inspection (TÜV): 03/2027, tire size: 385/65 R22.5-385/65 R22.5, Year of construction: 2019, mileage: 2,07,861 km, ref: W0015558 Prjdpfxe Agw Uto Airjc Equipment: * Air connection: Red/Yellow coupling, * Electrical connection: 1 x 15-pin + 2 x 7-pin, * ABS, * EBS, * Cooling unit, * Side impact protection, * Lifting mechanism odometer, * Toolbox: 1, * Spare wheel holder: 2, * Rear door design: Rear portal doors, * Locking bars on rear doors: 2, * Floor: Aluminum floor, * Double-deck system, * Double-deck beams: 22 VIN: WSM000005210872 Tire size: 385/65 R22.5 Width: 2.6m Height: 4m

Condition: excellent (used), Faceplates Diameter 625 mm Mounting: KK11 Taper diameter 196.88 Bolt circle 236 mm 6 studs, M20 Bore diameter 220 mm Weight 235 kg Pedpfxj Agw Uao Airsrc

Condition: used, mileage: 5,813 km, power: 53 kW (72.06 HP), first registration: 01/1979, fuel type: diesel, axle configuration: 4x4, color: green, driver cabin: other, gearing type: mechanical, Equipment: all wheel drive, cabin, Vehicle location: en route / in transit. Reported mileage corresponds to operating hours, OM314 engine, operating hours: 5813. Front power lift, hydraulics in the front and rear, trailer hitch on top and bottom. Very well-maintained and original tractor. Approximately €2,000 invested. Seals of the hydraulic steering block replaced, brake calipers newly sealed. All information without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Prodpfo Agw T Dsx Airec

Condition: used, mileage: 3,12,240 km, power: 320 kW (435.08 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 13,650 kg, maximum load weight: 12,350 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 4,800 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, cruise control, differential lock, fog lights, trailer coupling, Vehicle location: en route / in transit. Includes: driver's cab, 1 air suspension seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), raised exhaust, differential lock, fog lights, rotating beacon, leaf spring suspension, trailer hitch (air, light, hydraulic), green emissions sticker. Predpfx Aie Agw T Isrsc Wheelbase: 3600 mm. Body: 2-sided tipper with drop-side system (left). DRUM BRAKES ON FRONT AND REAR AXLES, CD RADIO WITH BLUETOOTH, NO MOBILE PHONE CHARGING INTERFACE, CB RADIO PRE-INSTALLATION, M-CAB, DISTRIBUTION COCKPIT, TRANSMISSION G 210-16/14.2-0.83, TELLIGENT GEARSHIFT II, TRANSFER GEARBOX VG2400 - 3W, 2-SPEED, MPII SERIES, MAIN TANK 300 L, ALUMINUM, ENGINE, V6, LA, 320 KW (435 HP), 1800/MIN, BLUETEC 5 (EURO V), AUXILIARY DRIVE GEARBOX MB 131-2C. All information is subject to change without notice, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, empty load weight: 4,860 kg, maximum load weight: 13,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2014, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, loading space volume: 10 m³, suspension: air, tire size: 385/65R22.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel body, 2 axles, tandem, air suspension, ABS (anti-lock braking system), roll-over cover, rear support Body: Tandem 3-sided tipper with roll-over cover, approx. 10 m³ capacity, galvanized frame, swing-out side gates. All information is subject to change without notice, as the vehicle is currently en route! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Predpo Agw T Sofx Airjc

Condition: excellent (used), overall weight: 75 kg, Anvil 75 kg Length 600 mm Width of hammer face 120 mm Length of hammer face 400 mm Height 260 mm Width 250 mm Square hole diameter 24 mm Podpj Agw Tvofx Airerc

Condition: excellent (used), overall weight: 58 kg, Vise ( 28639) Manufacturer: Brockhaus with rotating base Jaw width 175 mm Pjdpfx Aj Agw Treirerc Maximum opening 230 mm Jaw height 70 mm Total height with rotating base 180 mm Total height without rotating base 130 mm Clamping surface 360x360 mm Weight 58 kg

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2008, suspension: air, color: blue, Despite taking care to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino Prsde Agw Tkepfx Airec = More information = Year of manufacture: 2008 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension GVWR: 39,000 kg Technical condition: very good Visual condition: very good Please contact Thierry Leemans for further information.

Condition: good (used), Year of construction: 1998, Band saw with a maximum cutting length of 8 m maximum cutting width 60 cm Pedps Agw Tgofx Airsrc

Condition: excellent (used), Year of construction: 2017, 0,4 - 8 mm Pedpfj Agw Sxjx Airerc Workingpiece thickness from to 8 - 60 mm Total length ca. 4.930 mm Feed speed 10 m/min. total power requirement max. 6,1 kW kw Weight 1.400 kg

Condition: good (used), Year of construction: 2008, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 320 mm bore stroke 160 mm turning speeds 70 - 4000 U/min table: 770 x 760 mm Prsdpfx Ao Agw Suoirjc T-slots 3x 14 x 112 mm table height 780 mm distance spindle /table 988 / 304 mm bore spindles - Morse Taper 4 Kurzspindel MK feed 0.1-0.2-0.3-0.4 mm/U column diameter 145 mm engine output 1.5 / 2.4 kW weight 315 kg Current new price approx. 20.000 euros Special price upon request Features: - Robust pillar drilling machine * ??Drive: V-belt – VARIO system * Height-adjustable drill head * Constant table height - Automatic spindle feed * With electromagnetic feed clutch * And electrical control via the feed handle * 4 feed rates: 0.1–0.2–0.3–0.4 mm/rev - Infinitely variable speed adjustment * With digital speed display - Multi-speed (pole-changing) drive motor - Clockwise rotation of the drill spindle - Coolant system with a separate tank - 1x machine vise * Jaw width 150 mm / opening width 160 mm - EMERGENCY STOP button on the front - Operating manual (PDF)

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Prodpfx Aj Agw Sqeiroc Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: used, Year of construction: 1990, Working width 520 mm Length of the planing table 3000 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 3000 x 1000 x 1200 mm weight of the machine ca. 850 kg Prjdpfe Agw Smex Airec cutting capacity 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 244500 € 600 to 6050 mm 4 (Y1, Y2, X, R) 365 mm 5100 mm 510 mm 700 mm hydraulisch 80 mm/s 6,5 mm/s 80 mm/s 1000 mm 350 mm/s 300 mm/s 250 mm 990 mm 154 mm 280 l 2 x 11 kW kW Prjdpfx Aio Agw Sisrsc 7600 mm 2650 mm 3950 mm 52500 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Tool system Durma Without tools Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity Options: Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more PRICE FCA TÜRKIYE

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 20200 € 387.84 € Schwenkrahmen 3160 x 27 x 0,9 mm 15 - 120 m/min 270 mm 270 mm 340 x 240 mm rund 230, quadratisch 170 rund 150, quadratisch 100 rund 190, quadratisch 160 845 mm 1.1 kW 1.5 kW 2400 mm 1900 mm 1600 mm 920 kg DGS 270 model is the ideal model for mass production of solid material, tube and profile. Angular cutting is available between -45°/+60° degrees. Servo feeding system with bal screw reduces cutting tolerances to zero error marning. User friendly color touch screen PLC control panel allows to save 1 cutting program that can have 10 cutting steps. Hydraulic vice Hydromechanic band tension Saw band 27 mm Predpfo Agw Sfox Airoc Feeding vice 1000 mm stroke 1 programme with 10 steps Security switch Coolant pump Touchscreen control panel

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain Pedpfx Ais Agw Sbororc - Includes 1 machine vice - Includes clamping claws

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° Prode Agw R Tspfx Airec control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Pjdpfx Ao Agw R Noirsrc Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min