SCHWEIZER TECHNOLOGIES GmbH

Condition: used, Manual folding machine Schuller MAH 2-2000, working width 2030 mm, sheet thickness 2.0 mm Ijdpfjxn Avnsx Aaboih

Condition: used, Workshop-refurbished Single-Column Eccentric Press WEINGARTEN Type AV 40 Machine No. 121826 D, Year of manufacture 1976 – Completely overhauled in 2003 Pressing force: 40 tons Throat depth: 225 mm Table opening: Ø 200 mm with support rim Ø 225 mm Table dimensions: 560 x 470 mm Ram area: 260 x 200 mm Adjustable ram stroke: 8–88 mm Ram adjustment: 63 mm Max. install height: 500 mm Clamping shank bore: Ø 40 mm Strokes per minute: 40–120 Motor power: 4 kW Power supply: 400 Volt, 50 Hz Table height above floor: 700–950 mm - Table height adjustment with 2 support spindles - Drop-through hole in table as round table opening with reduction ring from Ø 225 to Ø 100 mm - Clutch-brake combination via WEINGARTEN friction-threaded clutch with TDC run-through protection - Stroke release via electric footswitch or two-hand control console Isdpsxlkq Iofx Aabsih - Front crankshaft support bearing - Overload protection via shear plate - Manual central lubrication - Electrical cabinet with dual-circuit contactor control from 2003, permanently mounted on the machine - Safety standard (UVV) for manual loading/unloading The machine is equipped with the following operating modes: - Setup - Single stroke (two-hand) - Single stroke (foot) - Continuous run (foot) - Automatic continuous run - External engagement Required space (L x W x H): 1900 x 950 x 2600 mm Weight: 3.1 tons Very good condition

Condition: good (used), – Capacity 25 tons – Table 525 x 405 mm – Stroke 75 mm – 120 strokes/min. Iijdpfxoxk Tm Nj Aabjh – Foot control or two-hand operation – Central lubrication system – 380V

Condition: used, Year of construction: 1986, pressure 35 t Isdpfx Asxh Sx Eoabjih throat 240 mm stroke 12-84 mm no. of strokes 135 Hub/min ram - range of adjustment 70 mm table surface area 600x450 mm ram surface 360x180 mm hole in the table 220x130 mm table height 630 mm tool hole in ram Ø35 mm weight of the machine ca. 2,5 t dimensions of the machine ca. BxTxH 1500x2000x2600 mm

Condition: new, Year of construction: 2025, throat depth: 175 mm, table width: 375 mm, table length: 570 mm, stroke adjustment: 60 mm, pressing force: 25 t, STANDARD FEATURES • Steel construction frame • Stress relieving of the frame and welded parts by vibration • Parallelism and squareness tolerance between tables in accordance with ISO and DIN standards • Pneumatic clutch and brake combination • Slide block guided by 4 rails • Slide, connecting rod, ram, and similar parts made of cast steel • High-strength, monobloc crankshaft • Bronze bushings in connecting rod • Equipped with a spare table • Ratchet device table-to-ram adjustment (motorized for 150 ton and above) • Manual centralized lubrication system • Pneumatic pedal with latching mechanism and dual-hand control with timer • Electric counter • PLC integration • CE compliance • Finger protection with light barriers • Safety PLC (controls all electrical systems, valves, double solenoids, and pedal) • Dual-coil safety valve • Panel with position lock switch • Safety block • Made in Türkiye TECHNICAL SPECIFICATIONS Capacity: 25 Tons Distance Between Table and Ram: 300 mm Ram Adjustment: 50 mm Ijdpfx Aaoxg R Ucobjih Approximate Press Width: 870 mm Approximate Press Depth: 1380 mm Approximate Press Height: 1870 mm Table Hole Diameter: 145 mm Table Size: 375 / 570 mm Die Clamping Slot Diameter: 35 mm Ram Size: 260 / 170 mm Table Height from Floor: 710 mm Stroke Adjustment: 10 / 60 mm Strokes per Minute: 120 spm Motor Power: 3 kW Motor Speed: 1000 RPM Approximate Weight: 1300 kg

Condition: good (used), Year of construction: 1976, functionality: fully functional, Technical data : Power 40 to 2 lifting speeds 57 + 86 H/min Projection 250 mm . Iodpfx Aexf Tw Rsabsih Further data according to offer . Delivered with new press test incl. new test report. .

Condition: good (used), pressing force: 25 t, – Capacity 25 tons – Table 360 x 350 mm – Foot control – 380V Iiodpoxc N Tcefx Aaboh

Condition: used, Russian manufacturing, Iiedpfx Aajxbf Sfebsh Max. pressing force: 25 t Table size: 550 x 400 mm

Condition: used, Year of construction: 1970, pressure 30 t Iijdjw U Epfspfx Aabsh stroke verstellbar weight of the machine ca. 2 t

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Isdsw T U A Sepfx Aabjih

Condition: used, Year of construction: 1978, machine/vehicle number: 4788, Capacity: 35 ton Throat depth: 225 mm Ram stroke: 8 - 80 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 325 mm Table surface area : 600 x 450 mm Slide area: 300 x 225 mm Number of strokes: 160 s.p.m. Required power: 2,2 kW Dimensions L x W x H: 1000 x 1600 x 2200 mm Iisdpfx Aow Tukijabsh Weight of machine approx.: 1,9 ton

Condition: used, Year of construction: 2004, functionality: fully functional, total height: 2,810 mm, total width: 1,240 mm, total length: 200 mm, overall weight: 3,200 kg, pressing force: 50 t, year of last overhaul: 2025, DESCRIPTION Heavy-duty eccentric press with pneumatic clutch, supplementary counter table, centralised lubrication, and impact protection guards with a front methacrylate door. CE compliant. SPECIFICATIONS Maximum pressing force: 50t Upper work table length: 450 mm Upper work table width: 310 mm Lower work table length: 750 mm Lower work table width: 440 mm Central bore, scrap ejection: 160 mm Minimum closed die height: 290 mm Maximum closed die height: 340 mm Maximum strokes per minute (variable): 72 to 180 x min Minimum slider stroke length: 12 mm Maximum slider stroke length: 110 mm Spindle adjustment: 70 mm Machine height: 2,810 mm Iiodpfx Aaew S Igbjbeh Machine length: 2,000 mm Machine width: 1,240 mm Power: 4 kW Machine weight: 3,200 kg Year of manufacture: 2004

Condition: used, Year of construction: 2000, functionality: fully functional, total height: 2,810 mm, total width: 1,240 mm, total length: 1,500 mm, overall weight: 4,300 kg, pressing force: 60 t, year of last overhaul: 2025, MODEL PE-63 Maximum force (pressing): 63 t Upper work table length: 450 mm Upper work table width: 310 mm Lower work table length: 900 mm Lower work table width: 560 mm Central hole for scrap ejection: 250(280) mm Usable vertical daylight between tables: 430 mm Max. admissible closed die height: 340 mm Maximum strokes per minute: 38-100 /min Minimum slide stroke length: 8 mm Maximum slide stroke length: 92 mm Ram adjustment: 80 mm Machine height: 2810 mm Isdpfxsw S Icvs Aabjih Machine length: 1500 mm Machine width: 1240 mm Power: 5.5 kW Machine weight: 4,300 KG Year of manufacture: 2000

Condition: good (used), Year of construction: 1979, Condition: 2012 overhauled to the latest UVV Iiedpfx Aaow R S Nqebeh Installation height: 800 mm Ram stroke: 500 mm Projection: 360 mm Nominal force: 400 kN Hydraulic pressure: 160 bar Operating hours: 1356 Other: new control from Pilz, electrical circuit diagrams available Video about functionality available

Condition: used, 380 V, belt drive (very quiet), 30 t pressing force, hand or foot operation, year of manufacture 1952 Isdpfsw Hyryex Aabeih

Condition: used, Year of construction: 1987, pressure 45 t throat 230 mm stroke 4-80 mm Ijdpsw E Nuzjfx Aabsih no. of strokes 120 Hub/min ram - range of adjustment 55 mm table surface area 695x455 mm ram surface 365x180 mm hole in the table 220x180 mm table height 890 mm tool hole in ram Ø 40 mm

Condition: used, Year of construction: 1987, pressure 35 t throat 220 mm Isdpsw E Nuuefx Aabeih stroke 8-96 mm no. of strokes 120 Hub/min ram - range of adjustment 50 mm table surface area 580x440 mm ram surface 305x170 mm hole in the table 215x175 mm table height 870 mm tool hole in ram Ø 40 mm

Condition: excellent (used), safe to handle, with new UVV test: Power 50 to lifting speed 115 /min throat depth 250 mm ram stroke 8 - 120 mm ram adjustment approx. 70 mm , Table, WxD approx. 650 x 500 mm Drop-through hole approx. 250 x 180 mm Iijdjw Dqfrjpfx Aaboh Max. Max. installation height approx. 380 mm . .

Condition: excellent (used), Single-column eccentric press Inv. No. 3647 Manufacturer: Ambold - WMW Model: PEEV 40.1 Press force: 40 tons * Stroke adjustment: 8 to 88 mm Iijdpfx Aaewxwt Esbsh * Adjustable ram: 55 mm * Ram strokes: 160 strokes/min * Installation height: 390 mm * Throat depth: 230 mm * Table area: 590 x 455 mm * Adjustable table!!! * Overload protection - shear plate * Foot / two-hand control * Separate clamping plate * Machine weight approx. 2700 kg.

Condition: used, pressure 40 t throat 225 mm stroke 8 - 84 mm table surface area 580 x 450 mm ram adjustment 55 mm Iiedpfx Aewxfmteabsh no. of strokes 130 Hub/min ram surface 185 x 180 mm ram hole 40 mm hole in the table 210 x 170 mm clamping plate 570 x 450 mm total power requirement 3,5 kW weight of the machine ca. 2,7 t dimensions of the machine ca. 1,4 x 1,1 x 2,1 m

Condition: used, Year of construction: 1975, functionality: fully functional, drop-through hole in table: 120 mm, pressing force: 50 t, Used eccentric press in working condition Iisdpfjwrb Tiex Aaboh

Condition: used, Year of construction: 1971, operating hours: 20,498 h, functionality: fully functional, throat depth: 240 mm, table height: 800 mm, total height: 2,500 mm, drop-through hole in table: 170 mm, table width: 450 mm, table length: 1,000 mm, total width: 2,000 mm, total length: 2,000 mm, overall weight: 3,200 kg, pressing force: 4 t, Used excentric press in good condition. Iisdpfewragnox Aabeh

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: P5276678, ram adjustment: 70 mm, stroke adjustment: 100 mm, pressing force: 35 t, Machine from the insolvency of an automotive supplier - machines are currently still in operation! TECHNICAL DETAILS Nominal force: 35 t Stroke adjustment: 8 - 100 mm Ram adjustment: 70 mm Stroke rate: 130 / min Motor power: 3 HP Iisdpowhdh Iefx Aabsh Other auctions from the same location: Further information according to the manufacturer - no guarantees given Ram surface: approx. 350 x 180 mm Space required: approx. 1.0 x 1.6 x 2.3 m

Condition: used, pressure 45 t throat 230 mm stroke 8-96 mm Iisdpfx Aswgi Rxeabjh total power requirement 4 ps

Condition: used, Year of construction: 1969, pressure 050 t throat 260 mm stroke 8 - 120 mm no. of strokes 100 /min Isdpfjvzxr Nsx Aaboih distance table/ram, max. stroke up, adjustment up 410 mm table surface area 650 x 500 mm hole in the table 250 x 180 mm table height over floor 740 - 980 mm table adjustable 240 mm ram surface 400 x 180 mm ram adjustment 70 mm power requirement 2,2 kW weight 2,3 t dimensions (WxDxH) 1,2 x 1,4 x 2,3 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request