Fortaco Zrt.

Condition: used, Year of construction: 1991, spindle diameter 115 mm x-travel 2000 mm y-travel 1200 mm control Heidenhain TNC 355 Lotse z-travel 1200 mm w-axis 590 mm Dodjzyvcxepfx Aptjcl total power requirement 48 kW

Condition: used, Year of construction: 2011, bore capacity in steel (diameter) 40 mm throat 250 mm bore stroke 125 mm spindle taper MK 4 spindle turning speed range 50 - 2500 U/min 550 mm 230 mm Dcjdozyvawspfx Aptel table surface area 820 x 240 mm connected load frequency 400 V total power requirement 0,8 kW weight of the machine ca. 0,7 t dimensions of the machine ca. 1,2 x 1,0 x 1,85 m Drilling and milling machine - Digital display - Clockwise/counter-clockwise rotation - 2 electric speed ranges - Drilling spindle with automatic feed and manual feed - Includes machine stand

Condition: like new (used), Year of construction: 2009, bore capacity in steel (diameter) 20 mm x-travel 240 mm Dodezyvadopfx Aptscl y-travel 160 mm table-size 430 x 240 mm spindle taper MT 2 spindle turning speed - stepless 200 - 3600 U/min quill stroke 75 mm voltage 400 V total power requirement 0,7 / 1,3 kW weight of the machine ca. 220 kg dimensions of the machine ca. 0,60 x 0,85 x 1,65 m !!! ATTENTION !!! EXCELLENT CONDITION !!! This machine comes from a vocational school! - Serial No.: 187426 - Stepless speed adjustment - Digital speed display - Cross table - Collet chuck - Mounted on a base frame

Condition: used, Year of construction: 1970, 3 -- -- -- Dcodpfx Apezycrmjtel

Condition: used, ISO 40 collets, various clamping devices, cutting inserts Dcodpfx Apozx Eqvetsl two cabinets

Condition: used, Small Drilling/Milling Machine ISERT ELECTRONIC Travel X: 350 mm Travel Y: 300 mm Travel Z: 70 mm Rotation: 8000 / 9500 / 13500 / 20500 / 24000 RPM The machine could be used for drilling printed circuit boards or other use. Dcjdszw Azcepfx Aptjl The machine was controlled through a PC that is no longer present. Possibility to use it in manual Equipped with: 1 Milling Machine KRESS Voltage: 220 V mono Dimensions (L x W x H): 950 x 700 x 700 mm Weight: approx 60 KG

Condition: used, Drilling / Milling machine OPTIMUM type OPTI F 40 E Travel X: 500 mm Travel Y: 200 mm Spindle: Ø 80 mm Cone CM3 Djdpozw Ay Sofx Aptocl Spindle exit: 120 mm Spindle speed: from 95 to 3200 RPM Table size: Length 730 mm x Width 210 mm 2 speeds motor Motor power: 1,5 Kw Straight head Cross table Manual Descent Equipped with: 1 rotary vice Voltage: 380 V Dimensions (L x W x H): 1200 x 900 x 1400 mm Weight: approx 350 KG

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drilling / Milling Machine KNUTH MARK SUPER SV Year of construction: 2021 Travel X: 560 mm Travel Y: 190 mm Travel Z: 400 mm Spindle: CM4 Spindle exit: 120 mm Spindle speed: from 75 to 2500 RPM Table size: 800 x 240 mm Tilting head Scale 3 axes Electronic speed variator Automatic head up/down Automatic X axe travel Manual Y axe travel Supplied with many accessories: Boring heads, clamps holders, etc (see photos) Voltage: 380 V Length: 1400 mm Depth: 1200 mm Dcsdpfxszw Ayxo Aptsl Height: 2000 mm Weight: approx 500 KG

Condition: good (used), – Automatic feed – Variomatic – Table 850 × 230 mm – Safety guard – Emergency stop – Cooling – Illumination – 380V Dcsdpfxszvhbxe Aptsl

Condition: ready for operation (used), Year of construction: 1965, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,150 mm, spindle speed (max.): 6,000 rpm, table load: 6,000 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 1,600 mm Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,150 mm Spindle speed: 20–6,000 rpm Work table: 1,200 × 1,400 mm Table load: max. 6 t Please note the following: Dsdpfx Apszuzpastecl The height and weight of the asset must be taken into account when selecting the transport vehicle. There is no loading dock on site. However, a forklift or an overhead crane is available for loading. If the asset is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made without any warranty or guarantee. The information on the technical data is based on the original offer. No liability is accepted for typographical or measurement errors. In case of doubt, please compare the information with the provided photos or inspect the item on site before the auction ends.

Condition: used, DIXI 450 P round table with horizontal and vertical design elements. Dodpfezub N Tox Aptecl

Condition: used, Year of construction: 1977, serial number 2934 Djdpfx Aoztfyteptecl weight 709 kg feed ja m/min taper MK 3

Condition: used, Year of construction: 2021, Bauer Maschinenbau Bohrmax Z40, Section Drill & Milling Machine, Overall Table Length 4350mm, 4 Sections 1050mm Long, Penta NC V2 Programme Control, 10 Tool ATC, CAT 40 Spindle, 11kw Power, Travels X Axis = 4000mm, Y Axis = 580mm, Z Axis = 700mm, Drilling Capacity 3 - 40mm, Drilling Speed Range 140 - 2300rpm, Rapid Traverse X = 24m/min, Y & Z = 7.5m/min, Table Width 560mm, Underside of Tool Holder to Table 700mm, Motor 7.5kw. S/No. 21-0156 (2021) Dcjdpfx Aezr Ix Asptol Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: good (used), Year of construction: 2007, functionality: fully functional, Ficep 1001 DZB CNC Drilling / Sawing Line- Year 2007. Dedpfx Aszrpx Dsptjcl Rotating Spindle. Automatic Tool Changer. 4 way Scribing. Gripper feed. 18.3 metres infeed and 18.3 metres outfeed. Lift and Carry Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: good (used), operating hours: 200 h, functionality: fully functional, machine/vehicle number: H05107, Bench drill press Knuth SSB 50nSuper MK 4 WORK AREA Drilling capacity 50 mm Threading capacity, steel M 30 Dcsdpfezqt U Hjx Aptsl Table clamping surface 580 mm x 460 mm Quill stroke 200 mm Manual table travel 515 mm Motorized table travel 405 mm Table swivel range (max.) ± 50° Column diameter 180 mm Distance from spindle nose to table surface 575 mm Distance from spindle nose to base 1165 mm Overhang 360 mm MAIN SPINDLE Speed range 50 rpm - 2000 rpm Spindle taper 4 MK FEED Quill feeds 0.08; 0.12; 0.17; 0.24; 0.35; 0.50 mm/rev

Condition: good (used), Year of construction: 1973, Ref. -No.: 10658 Manufacturer: SCHARMANN Type: Opticut FB 140 Year of construction: 1973 Type of control: CNC Control: Heidenhain Storage location: Halberstadt Country of origin: Germany Machine-No.: 162XXX X-Travel: 2000 mm Y-Travel: 2000 mm Z-Travel: 1500 mm Spindle Diameter: 140 mm Spindle Taper: ISO 50 Table Dimensions (Lengthxwidth): 1800 x 1500 mm Table Load: 15000 kg Turning Speeds: 2,3 - 810 RPM Spindle stroke: max.800 mm Total Power Requirement: 30 kW Machine length: 7300 mm Machine width: 5600 mm Machine Height: 4000 mm Weight Of The Machine Ca.: 31 t Further information: - Faceplate with NC face slider and NC rotary table - Heidenhain digital readout Dedpozp Dn Iofx Aptjcl - Various tool holders - Various clamping devices The machine can be viewed while powered on by prior arrangement.

Condition: good (used), Year of construction: 2000, Machine is with SK 30 20.000 rpm Parts shown by hand not come. Dedeznmqiepfx Aptocl

Condition: used, Year of construction: 1980, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, spindle speed (max.): 1,200 rpm, spindle speed (min.): 15 rpm, spindle mount: MK 5, throat depth: 2,000 mm, quill diameter: 76 mm, quill stroke: 600 mm, type of input current: three-phase, total length: 4,040 mm, total height: 2,900 mm, table width: 900 mm, input voltage: 380 V, total width: 2,800 mm, table length: 1,200 mm, drilling depth: 600 mm, rotational speed (max.): 1,200 rpm, rotational speed (min.): 15 rpm, spindle diameter: 80 mm, feed length W-axis: 600 mm, rapid traverse X-axis: 3,450 m/min, rapid traverse Y-axis: 3,450 m/min, rapid traverse Z-axis: 3,450 m/min, Equipment: documentation/manual, SORALUCE ALF 80 A Universal Drilling and Milling Machine Year of manufacture: 1980 · Heidenhain ND70 · Extensive original documentation For sale is a robust and versatile SORALUCE ALF 80 A universal drilling and milling machine, manufactured in 1980. The machine is suitable for demanding drilling, reaming, and milling operations, as well as for machining larger and heavier workpieces. Due to its solid construction, the ALF 80 is particularly suitable for classic machine, plant, steel, and special machine construction. The machine features a Heidenhain ND70 position indicator. Extensive original operating instructions and technical documentation from SORALUCE are available. Equipment / Accessories In addition to the machine, the offer includes an extensive accessory package, so that the SORALUCE ALF 80 A can be used for various machining tasks. Among other things, the following are included: Large, solid clamping angle for vertical or angular clamping and machining of workpieces Extensive selection of tool holders and tool attachments Various clamping devices Additional existing tools and machine accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents The large clamping angle can be seen in the machine photos. Thanks to the extensive accessories, the machine offers a significant practical added value compared to a machine without the corresponding tool attachments and clamping devices. The exact scope of the accessories can be viewed during an inspection. On request, further detailed photos of the accessories can be provided. Technical data Manufacturer: SORALUCE Dcjdpfx Aezl Rqhsptjl Model: ALF 80 A Machine type: Universal drilling and milling machine Year of manufacture: 1980 Machine no.: 55/5-110 Travel distances / Working area Cross travel: 1,600 mm Longitudinal travel of table: 1,100 mm Longitudinal travel of table without steady rest: 1,400 mm Vertical travel: 1,200 mm Longitudinal travel of drilling spindle: 600 mm Largest distance between spindle and steady rest: 2,000 mm Work table Useful area: 900 × 1,200 mm Spindle Drilling spindle diameter: 76.2 mm Spindle diameter for milling: 128.57 mm Tool holder: Morse taper MK 5 Number of speed stages: 24 Speed range: 15–1,200 rpm Feeds Drilling spindle / Faceplate: 9 feed stages 0.036–2 mm/rev Spindle box / Slide: 9 feed stages 0.072–4 mm/rev Rapid traverse: Drilling spindle / Faceplate: 600–1,725 mm/min Spindle box / Slide: 1,200–3,450 mm/min Faceplate Design: detachable Diameter: 430 mm Largest face turning diameter: 750 mm Adjustment of face turning slide: 150 mm Motorization Main brake motor: 10 hp Coolant motor: 0.25 hp Dimensions and weight Overall length: 4,040 mm Overall width: 2,800 mm Overall height: 2,900 mm Net weight: approx. 9,200 kg Equipment / Accessories Heidenhain ND70 position indicator Original SORALUCE operating instructions Technical documentation Foundation and installation documents Available accessories and tools for the drilling machine, by arrangement Due to its solid, heavy construction, the machine is of particular interest to companies that are looking for a reliable conventional drilling and milling machine for large workpieces. Inspection possible by appointment. We will gladly provide further photos, technical documents and detailed information.

Condition: as good as new (ex-display), BORING AND MILLING MACHINE BFZ 3000 Dcedpfx Aozlyr Ieptjl for the cost-effective production of profiles and long parts made of steel, stainless steel and aluminum Demonstration machine, year of manufacture 2018 Control system: Siemens SINUMERIK 808 D Advanced max. working area x-axis 3,000 mm max. working area y-axis 260 mm max. working area z-axis 300 mm Tool holder: BT 30 Spindle speed: 4,000 rpm at i=2 (various gear ratios possible) Spindle drive power: 7.5 kW Spindle torque: 48 Nm at 40% duty cycle Rapid traverse: 40,000 mm/min Drilling capacity in S355: 26 mm Threading capacity in S355: M16 Milling capacity in S355, 40% duty cycle: 200 cm³/min Repeatability: +/- 0.05 Workpiece support height: 850 mm Space requirement L x W x H: 6,000 x 1,600 x 2,400 mm Total weight: approx. 3,500 kg Tool changer: 11-position max. tool diameter: 80 mm max. tool length: 160 mm max. tool weight: 4 kg Connections: max. electrical power: 12 kW Slow-blow fuse: 32 A Compressed air: 6 bar Minimum quantity lubrication, 3 pcs. mechanical-hydraulic vises Inspection possible by appointment.

Condition: used, Year of construction: 2018, functionality: fully functional, machine/vehicle number: SN 018-0212, travel distance X-axis: 4,000 mm, travel distance Y-axis: 580 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 2,200 rpm, spindle speed (min.): 140 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 6 m/min, controller model: Penta-Tec, overall weight: 6,000 kg, nominal power (apparent): 12 kVA, number of slots in tool magazine: 10, We are offering this used BAUER Bohrmax Z40 vertical machining center, manufactured in 2018, for sale. Manufacturer: BAUER Model: Bohrmax Z40 Year of manufacture: 2018 SCOPE OF DELIVERY / TECHNICAL DATA: • Spindle speed range: 140-2200 rpm • Drive for X, Y, Z axes: servo motor • Rapid traverse X-axis: 20 m/min • Rapid traverse Y-axis: 6 m/min • Rapid traverse Z-axis: 6 m/min • Distance from top of table to bottom of tool holder: 700 mm • Tool holder: SK40 • Tool changer for 10 tools • T-slots: M12 • Drilling diameter: 3-32 mm • Thread drilling: M4 - M24 • Tolerance X-axis: ± 0.1 mm • Tolerance Y and Z axes: 0.06 mm • Drive motor for spindle: 7.5 kW • Light curtain at the front • Control: Touchscreen 18” • Chip conveyor with slat conveyor additional integrated equipment: • Automatic tool length measurement • Handheld control unit RCS01 • Software extension for pendulum operation + DXF package • Universally controllable hydraulic clamping system with 8 clamping points (manufacturer Polund - Pro-Clamp Systems) If you have any questions or require further information, please send us a message or call us. Dcsdpfx Aozlp T Isptol

Condition: ready for operation (used), ARBOGA UM 3508 / Drilling and milling machine with Heidenhain digital display -Drilling capacity in steel: 35 mm -Thread cutting: M 24 -Travel ranges X/Y/Z: 450x250x500 mm -Table dimensions: 650x270 mm -Cross slide table -Automatic feeds -Heidenhain digital display -Speed range / gear: 70-2160 RPM -Automatic feed -Overhang: 320 mm -Drilling depth: approx. 170 mm -Drilling/milling head: swiveling Dcedpfezlg I Nex Aptel -Drilling depth stop -Drive power: 1.5 kW -Control panel -Indexing head -Machine feet -Documentation -Dimensions: L x W x H: 1.2 x 1.1 x 1.9 meters / Weight: approx. 800 kg Errors and omissions excepted.

Condition: ready for operation (used), KNUTH GBF 30 / Drilling and Milling Machine -Digital display Dodszkrmbopfx Aptjcl -Year of manufacture 1986 -Max. drilling capacity / steel 32mm -Speed range 100 - 2900 rpm -Speed stages 100/205/345/440/695/885/1450/2900 rpm -Cross slide with T-slots -Manual quill -Height-adjustable drilling head -Drilling/milling head can be swivelled -Drill chuck Dimensions: L x W x H 0.9 x 0.7 x 1.8 meters / 550 kg Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, type of input current: three-phase, total length: 1,300 mm, total height: 2,000 mm, table width: 255 mm, input voltage: 400 V, total width: 1,350 mm, table length: 800 mm, drilling capacity: 40 mm, Equipment: documentation/manual, SERRMAC TCS 40 TC VR DA Drilling and Milling Machine Square column and prismatic guides. Dodpfozkkm Hsx Aptocl Complete with: Automatic feed. Variable speed with delay. Tapping system via reversing gearbox. Lubrication system. Motorized rapid vertical feed for table and cross slide. Vice. Drilling in steel, diameter 40 mm. Tapping M26. CM 4 spindle connection. Spindle travel 145 mm. Cross slide table 800 x 255 mm. Variable speed with delay 64-2350 rpm. Motor 2.2 kW. Three-phase power supply 400 V. Weight 780 kg.

Condition: used, Scharmann Drilling Machine Dcjdpfx Apjzilmrjtol Available from September Year of manufacture: June 1965, original purchase price: 267,045 DM Travel ranges: Longitudinal (X): 1,600 mm Vertical (Y): 1,200 mm Lateral (Z): 1,150 mm Spindle speed: 20 – 6,000 min⁻¹ Table size: 1,200 × 1,400 mm Table load: max. 6 t Without tools and accessories. Disassembly begins after payment is received. Collection in September. Being replaced with a new machine. Very important: • The height and weight of the asset must be taken into account when selecting the transport vehicle. • There is no loading dock on site. However, a forklift or an overhead crane is available for loading. • If collection is not carried out on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. • The sale is made excluding any guarantee or warranty. • The information provided consists of the technical data from the original offer. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: used, functionality: fully functional, MASCHIATRICE A PATRONA usata, FAMUP (SERRMAC) MDR16.MASCHIATRICE A PATRONA, SERRMAC CON IMPIANTO REFRIGERANTE PIEDISTALLO E VASCA, USATO. Dodozht Izspfx Aptjcl