Used Peddiworker 502 for sale (699)

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Cedozi S R Ropfx Af Ajrd - Saw Drive / Output: 7.5 kW (7,500 W), S6, 2,850 rpm- Input Voltage / Current Type: 400 V, Three-phase, 50 Hz, I = 16A- Operating Pressure: 6 - 8 bar- Tool Specification: Suitable for saw blades Ø 550 mm (Saw blade bore: 40 mm)- Saw Blade Speed (Max.): 2,850 rpm- Cutting Capacity Dimensions: 270 x 150 mm (Width x Height)- Cutting Height (Max.): 150 mm- Cutting Diameter / Range: 270 mm max. / Round material at 90°: 190 mm max.- Maximum Profile Width: 270 mm- Section Length Limits: Min. 3 mm / Max. 4,000 mm- Minimum Remnant Cut: From 75 mm (profile-dependent)- Control System: Siemens S7 with SIMATIC HMI Touch Panel (Includes CPU 315, Flexisoft safety, piece counter, batch multiplier for bundle processing, cycle time indication in seconds, chain dimensions, and fault diagnostics)- Connectivity: IXON router for remote VPN connection- Material Feed Unit: 1 Axis — Electronic servo-driven material feed unit with 800 mm individual stroke feed length, utilizing a ball screw spindle, including a reversing device for cut lengths up to 4 m max. Profile support area in feed zone equipped with a lift/lower roller.- Saw Feed: Motorized saw blade feed, steplessly adjustable (operating from bottom to top)- Workpiece Clamping: Pneumatic horizontal and vertical profile clamping systems on both the feed and discharge sides of the saw head. Features a clamping pressure reduction system with 6 individual pressure regulators.- Additional Processing Features: Cutting gap extension on both sides of the saw blade to protect the cut surface- Lubrication: Intermittent spray device with level monitoring, automatic shut-off and a 1-liter lubricant reservoir- Safety & Noise Protection: Complete safety guard over both the saw head and the feed unit. Frame interior lined with soundproofing insulation mats. Automatic machine shut-off via limit switch at the end of the material stock.- Infeed/Outfeed Material Support:* Infeed side: 740 mm roller conveyor with physical intrusion guard* Outfeed side: 450 mm Pertinax tabletop with physical intrusion guard- Extraction Ports: Two extraction nozzles Ø 100 mm- Chip Extraction Unit:* Model: Chip Extraction MG 3 (Italyvacuum s.r.l. Vortex 58 FT)* Year: 2022* Power: 3 kW* Current: 7.2 A* Voltage: 400 V / 3~ / ± 5%* Weight: 130 kg* Features: Integrated Cyclonic System, Contactless Antistatic System- Viewing is possible while the power is on.

Condition: used, Year of construction: 2007, Delivery Palamides Delta 502 Csdpfxoy Iv Nqj Af Aord Year: 2007 - Vertical stacker - bundler - Banding device(s): 2 Voltage 220 volts

Condition: new, Screw gear RTP 502-000-8 GROB 40:23 240/01 00000 Screw gear GROB RTP 502-000-8 Manufacturer: GROB Antriebstechnik Type: RTP 502-000-8 Codszd Ny Sepfx Af Aord Design: Screw gear Drawing number: 90010016737 Packaging: Wooden crate Condition: unused, packaged

Condition: used, Year of construction: 2008, band width 6 - 13 mm Csdpjzcgauofx Af Aerd table-size 850 x 560 mm work height max. ~ 780 mm connected load frequency 230 V Transpak TP-502 semi-automatic strapping machine for fast and secure strapping of cartons, packages, and general cargo with plastic strapping. The machine automatically seals and tightens the strapping band and is suitable for efficient use in shipping departments, warehouses, and packaging areas (strapping band included).

Condition: excellent (used), Year of construction: 2023, operating hours: 450 h, functionality: fully functional, machine/vehicle number: 1589 / 1590, saw blade diameter: 500 mm, Fully automatic sawing and punching machine for aluminium and plastic profiles The Profilma 502 ST-V combines precise sawing and punching in a continuous, automated workflow. Based on the proven Profilma 502 model, this machine is ideally suited for high-volume production, complex processing tasks, and the machining of bundle materials. Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated error diagnostics. An IXON router enables secure remote access via VPN. Up to 10 punching dimensions can be programmed per job. Sawing range & feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed adjustment - Saw cut from below, powered feed - Material feed: 3–800 mm, reverse feeding up to 4,000 mm - Ball screw spindle with servo drive and round guide rails - Residual piece: from 75 mm (sawing mode), from 80 mm (punching/sawing mode)* Punching unit: - Vertical hydraulic punch (output side) with automatic oil cooling - Punching force: 300 kN - Stroke: 20 mm - Double stroke cycle time: 2 - 3 seconds - Punch slug ejection into the machine frame - Conveyor belt 250 × 800 mm for parts removal Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction ports Ø 100 mm, potential-free contact for extraction control system - Minimum quantity spray unit with two 3-litre tanks and fill level display Crjdpfxeyyz Ebe Af Ajd - Noise protection package: enclosure and saw guard internally insulated - Roller conveyor (740 mm) with reach-in protection on the infeed side - Sturdy stationary machine frame, working height: 960 mm - Manually operated safety cover - Saw blade housing located below the table surface Max. cutting range: - Profile height: up to 65 mm - Profile width: up to 170 mm Technical data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - 2 machines available ----- Attractive offer – flexible & worry-free We not only provide you with a high-quality product, but also offer customised financing solutions tailored to your needs. Whether down payment, instalment payment, or individual financing models – together, we will find the right option for you. If desired, we can also take care of the entire transport logistics. From planning through to reliable delivery, we ensure a smooth and punctual process so you do not need to worry about anything. 📞 Please feel free to contact us for more information or a non-binding quotation. We will provide you with professional and personal advice. Subject to prior sale, modifications, and errors!

Condition: excellent (used), Year of construction: 2023, operating hours: 67 h, functionality: fully functional, machine/vehicle number: 1591 / 1592, saw blade diameter: 500 mm, Fully Automatic Sawing and Punching Machine for Aluminum and Plastic Profiles The Profilma 502 ST - HV combines precise sawing and flexible punching in a fully automatic process. Based on the Profilma 502 model, it is specifically optimized for high-volume applications and combined processing operations – including the handling of entire profile layers. Cjdpfxsyyzxhe Af Aerd Control is provided via a Siemens S7 system with touch display, piece counter, cycle time display, and integrated fault diagnosis. An IXON router allows for secure remote access via VPN. Up to 10 punching dimensions can be programmed per order. The horizontal punching unit can be deactivated if required. Sawing Area & Feed: - 500–550 mm saw blades - Saw drive: 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm - Infinitely variable speed control - Saw cuts from below, with motorized feed - Material feed: 3–800 mm, reversible up to 4,000 mm - Ball screw spindle with servo drive and round guide shafts - Remnant length: from 75 mm (saw mode), from 80 mm (punch/saw mode)* Punching Unit: - Vertical and horizontal hydraulic punching (on discharge side) with automatic oil cooler - Punching force: 2 × 150 kN - Stroke: ≤ 20 mm - Vertical stroke infinitely adjustable (also suitable for embossing) - Horizontal punching cylinder can be switched off separately - Double stroke cycle time: 2x 2–3 seconds - Punch scrap is discharged sideways from the machine frame - 250 × 800 mm conveyor belt for part discharge Equipment: - 2 pneumatic clamping cylinders (vertical, pressure-reduced) - 3 chip extraction nozzles Ø 100 mm, volt-free contact for extraction control - Minimum quantity lubrication unit with 2x 3-liter tanks and level indicator - Noise protection package: sound-insulated hood and internal saw blade guard - Roller conveyor (740 mm) with reach protection on infeed side - Sturdy stationary frame, working height: 960 mm - Manually opening safety hood - Saw blade housing located under the table Max. Cutting Area: - Profile height: up to 65 mm - Profile width: up to 135 mm Technical Data: - Dimensions (W × D × H): approx. 311 × 153 × 197 cm - Total of 2 units available ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product but also tailored financing options that suit your needs. Whether down payment, installment plans, or individual financing models – together we will find the right solution. If desired, we can also handle the complete transport organization. From planning to reliable delivery, we ensure a smooth and timely process so you don’t have to worry about a thing. 📞 Contact us for more information or a non-binding quote. We provide you with personal and competent advice. Subject to prior sale, changes, and errors!

Condition: used, Year of construction: 1994, punching force max. 50 t Crsdpfeyrhyuox Af Aod throat 510 mm stroke 32 mm stroke - stepless adjustable 10 - 32 mm no. of strokes 35 bei 10 mm Hub/min Working height 1070 mm daylight 350 mm table width 255 mm dimensions ca. 1080 x 650 x 1680 mm material layer 630 X 535 weight ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3, up to Ø 32.5 mm Quick-change device for punches 2 and 5 up to Ø 31.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm

Condition: good (used), Pump performance data: Flow rate 262 l/min, operating pressure 1040 bar, motor speed 1800 rpm, crankshaft speed 465 rpm, piston diameter 50 mm, required motor power 497 kW. Diesel engine: Manufacturer Volvo, type TAD 1643 VE-B Stage II / Tier 2, engine number 2016121993, voltage 24 V, power output 565 kW, speed 1800 rpm, idle speed 900 rpm. WITHOUT truck; the truck is not for sale. Codozf Rqbjpfx Af Ajrd Year of manufacture 2020.

Condition: ready for operation (used), KEB Brinkmann .502-62B0 engine SN: 16100995, used, good condition, 100% functional, scope of delivery as per photos Codpfxov H H Ddj Af Aerd

Condition: used, Year of construction: 2012, Air cushion machine, Fromm Airpad machine Manufacturer: Brüninghaus Type: AP 502 Year of manufacture: approx. 2012 Film material: PA/PE composite film or Polyethylene film (100% recyclable) Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production): max. 3.5 Nl/cycle Performance: 25 – 49 cycles/min. (depending on film type and cushion size) Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Dimensions: (L x W x H) 1,600 x 767 x 1,292 mm Weight: 230 kg Accessories / Special equipment: • Stored programs for different cushion sizes • Program change is done at the push of a button Cedewulylspfx Af Asrd • From 4 cm to 16 cm in length can be individually produced with a defined filling level • 10 programs are available for storing multiple parameters 24626

Year of construction: 1988, condition: used, Precision saw arbor Meinert PH 502 D with pneumatic blade clamping system for circular saws with a maximum diameter of 2000 mm. Csdpfx Aecrpz Ssf Asrd

Condition: used, Year of construction: 2021, functionality: fully functional, STC-Ref:G-571-0053 Palamides Gamma 502-HO, Year: 2021 format: 510 x 240 mm Cedpfxsy R A Eqo Af Asrd equipped: - Dual-purpose cutting device - delivery with banding - pile height max. 12 cm - pile height min. 2 cm - speed 600 pck/hr per nutzen max. - paper size max. 51 x 24 cm - paper size min. 10,5 x 9,5 cm - total counter: 78.844 pcs

Condition: used, Year of construction: 2000, Horizon AFC-504 AKT Automatic Combination Folder, Used The Horizon AFC-504 AKT is a proven and robust automatic combination folder, specially designed for efficient processing of brochures, inserts, and other folding jobs. Key Features: - Sturdy construction for reliable and long-lasting performance - Flexibility to handle various folding types and paper formats - Easy operation for quick setup times - Suitable for medium to large production volumes Technical Specifications: - Max. sheet size: 490 x 650 mm - Min. sheet size: 120 x 172 mm - Paper weight: 40 to 250 g/m² Csdpfx Afsw Eu Rbo Ajrd - Stack height: up to 650 mm - Production speed: up to 27,000 cycles/hour - Power supply: 400 V, 50 Hz, 2.5 kW - Dimensions (L x W x H): 2,540 x 1,790 x 1,440 mm - Weight: approx. 870 kg All-Inclusive Service Package We take care of everything: from secure packaging and transportation to customs clearance. Upon request, we can also provide a customized leasing offer. Sustainable and Economical Choose a used machine and benefit twice: Save the environment and your budget. Despite possible signs of use, you receive a quality product at an attractive price.

Condition: good (used), Year of construction: 2012, Double frame filling system 8-20 mm frame width. For aluminium and TGI. Credpfx Afsu Sy Tke Ajd Height: approx. 3200mm Width: approx. 1300mm Depth: approx. 1000 mm Weight: approx. 350 kg

Condition: used, Year of construction: 2007, Punching force: 500 kN For example, punch a 20 mm hole in 18 mm steel Stroke triggering via foot switch Assortment of tools is included in the price Csdpfoy Uybwjx Af Asrd

Year of construction: 1958, condition: ready for operation (used), Offered is a conventional lathe. Swing diameter over bed: 500mm, swing diameter over support: 300mm, spindle bore: 58mm, taper in the tailstock quill: MT 4, design: conventional leadscrew and feed rod lathe, control: manual. Equipped with three-jaw chuck, four-way tool post, tailstock, chip tray. Weight: approx. 2200kg, overall dimensions X/Y/Z: approx. 2700mm/1100mm/1350mm. Inspection possible by arrangement. Crsdpfx Afjzdknwe Aod

Condition: used, CNC Press Brake COLLY 502/A Crjdpfxjzdimyj Af Asd Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

Condition: used, Year of construction: 1992, Max. punching and shearing capacity: 800 kN Cjdpfx Ajwak Hnef Aerd Punches e.g. 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm up to 15 mm steel Further technical data on request With a range of punches and dies as desired

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. Crsdoyy S Uajpfx Af Asd The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Location: Available from stock, 54634 Bitburg - available immediately -

Condition: good (used), Position sensor, valve actuator, valve drive, actuator, servo motor Cedeb Uhr Uopfx Af Ajrd -Type: T 100 a 502 -Weight: 0.3 kg

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 502 S Alüminyum Pvc 3'lü kol yeri delme su tahliye makinesi yüksek frekans motorlu, - Complies with CE standards. - Possibility of opening locking places, hinge slots, handle holes and water drainage channels of aluminum and PVC profiles. - Vertical axis operation of the copy head - Horizontal axis operation of the triple drilling system - Ability of the water drainage system to operate in angled position - Possibility to make universal template optional template - Possibility of triple drilling copy milling cutter or grooving system working as one Crjdpfx Aoramz Hsf Aod - High frequency motor (18000 rpm) - Right conveyor system (1 meter)

Condition: used, Year of construction: 2000, Max. sheet thickness: 2 mm steel Max. round diameter: 1000 mm Motor drive via footswitch Crsdswb Efzopfx Af Aed Good condition

Condition: new, Year of construction: 2019, functionality: fully functional, machine/vehicle number: 942.991-C-1058233, power: 450 kW (611.83 HP), fuel type: diesel, The engine has never been used. The unit adheres to Euro 4-5 emission standards. Discounts may be applied in case of multiple unit purchases. Please contact for your other Mercedes-Benz engine for heavy vehicle and crane inquiries with varying powers and emission standards. Cjdjwhkrmjpfx Af Ajrd

Year of construction: 2014, condition: good (used), High-quality Airpad machine from a renowned manufacturer. Suitable for producing custom-designed, air-filled protective and cushioning elements made of PA and PE film, as well as paper-based bubble wrap. Cedskkcqqspfx Af Aord Typically, four air cushions are produced per working cycle. Various formats can be produced. For this purpose, 10 programs are available to store multiple parameters. By calling up the corresponding program on the display, air cushions can be produced with lengths ranging from 4 cm to 16 cm and individually defined fill levels. The resulting air cushion strips are then wound into rolls by a motorized device. When the roll is full, the machine automatically shuts down. The finished roll can then be manually removed and used as packaging material. The machine can be moved by pushing it on its rollers and secured in place using brakes. The machine can be demonstrated while powered on.

Condition: used, The Horizon AFC-502 folding machine, serial number 23027, is a versatile solution for professional folding applications. Currently dismantled and located in Germany, it is designed to handle a wide range of formats with precision and efficiency. This model offers 2 parallel folds and 1 cross fold, supported by a suction head with rotary feeder for smooth and reliable sheet handling. It accommodates sheet widths up to 500 mm (minimum 105 mm) and lengths up to 648 mm (minimum 174 mm). Cross folding is possible from 182 mm to 500 mm, while perforation can be performed on sheets ranging from 105 mm to 500 mm in width. Performance highlights: Folding capacity: 2 parallel folds + 1 cross fold Sheet width: 105 ??? 500 mm Sheet length: 174 ??? 648 mm Cross folding: 182 ??? 500 mm Perforation width: 105 ??? 500 mm Speed: up to 180 m/min Crodpow U Dtvjfx Af Ajd Compact and efficient, the Horizon AFC-502 is well-suited for printshops requiring reliable folding performance across a variety of formats. Format: 500 mm Equipment: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder