LV Kommunal - Friedrich & Skowronek GbR

Condition: used, mileage: 5,813 km, power: 53 kW (72.06 HP), first registration: 01/1979, fuel type: diesel, axle configuration: 4x4, color: green, driver cabin: other, gearing type: mechanical, Equipment: all wheel drive, cabin, Vehicle location: en route / in transit. Reported mileage corresponds to operating hours, OM314 engine, operating hours: 5813. Front power lift, hydraulics in the front and rear, trailer hitch on top and bottom. Very well-maintained and original tractor. Approximately €2,000 invested. Seals of the hydraulic steering block replaced, brake calipers newly sealed. Prodpfx Aio Agw T Dsroc All information without guarantee, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, mileage: 3,12,240 km, power: 320 kW (435.08 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 13,650 kg, maximum load weight: 12,350 kg, overall weight: 26,000 kg, tire size: 315/80R22,5, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel, loading space length: 4,800 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, Equipment: ABS, air conditioning, all wheel drive, cabin, cruise control, differential lock, fog lights, trailer coupling, Vehicle location: en route / in transit. Includes: driver's cab, 1 air suspension seat, rear window, electric mirrors, heated mirrors, electric window (left), electric window (right), air conditioning, sun visor, cruise control, Telligent gearshift, ABS (anti-lock braking system), raised exhaust, differential lock, fog lights, rotating beacon, leaf spring suspension, trailer hitch (air, light, hydraulic), green emissions sticker. Wheelbase: 3600 mm. Body: 2-sided tipper with drop-side system (left). DRUM BRAKES ON FRONT AND REAR AXLES, CD RADIO WITH BLUETOOTH, NO MOBILE PHONE CHARGING INTERFACE, CB RADIO PRE-INSTALLATION, M-CAB, DISTRIBUTION COCKPIT, TRANSMISSION G 210-16/14.2-0.83, TELLIGENT GEARSHIFT II, TRANSFER GEARBOX VG2400 - 3W, 2-SPEED, MPII SERIES, MAIN TANK 300 L, ALUMINUM, ENGINE, V6, LA, 320 KW (435 HP), 1800/MIN, BLUETEC 5 (EURO V), AUXILIARY DRIVE GEARBOX MB 131-2C. Prodpfxe Agw T Is Airec All information is subject to change without notice, as the vehicle is currently en route! ACCESSORY INFORMATION WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, empty load weight: 4,860 kg, maximum load weight: 13,140 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2014, loading space length: 4,900 mm, loading space width: 2,350 mm, loading space height: 900 mm, loading space volume: 10 m³, suspension: air, tire size: 385/65R22.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, steel body, 2 axles, tandem, air suspension, ABS (anti-lock braking system), roll-over cover, rear support Body: Tandem 3-sided tipper with roll-over cover, approx. 10 m³ capacity, galvanized frame, swing-out side gates. All information is subject to change without notice, as the vehicle is currently en route! ACCESSORY INFORMATION IS WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Prodpfx Aj Agw T Soiroc

Condition: excellent (used), overall weight: 75 kg, Anvil 75 kg Length 600 mm Width of hammer face 120 mm Length of hammer face 400 mm Height 260 mm Prsdpfx As Agw Tveirec Width 250 mm Square hole diameter 24 mm

Condition: excellent (used), overall weight: 58 kg, Vise ( 28639) Manufacturer: Brockhaus with rotating base Jaw width 175 mm Maximum opening 230 mm Jaw height 70 mm Total height with rotating base 180 mm Pjdpe Agw Trjfx Airerc Total height without rotating base 130 mm Clamping surface 360x360 mm Weight 58 kg

Condition: excellent (used), axle configuration: 3 axles, first registration: 09/2008, suspension: air, color: blue, Despite taking care to ensure the data is entered correctly, we cannot be held responsible for any errors in this advertisement. Images may differ from the actual product. TLD Trucks & Vans BV Wolfstee 44 B-2200 Herentals Belgium Tel: Leemans Thierry Tel: Leemans Dino = More information = Year of manufacture: 2008 Axle brand: SAF Brakes: Disc brakes Podpfxo Agw Tke Airorc Suspension: Air suspension GVWR: 39,000 kg Technical condition: very good Visual condition: very good Please contact Thierry Leemans for further information.

Condition: good (used), Year of construction: 1998, Band saw with a maximum cutting length of 8 m maximum cutting width 60 cm Psdpfxe Agw Tgs Airjrc

Condition: excellent (used), Year of construction: 2017, 0,4 - 8 mm Workingpiece thickness from to 8 - 60 mm Total length ca. 4.930 mm Pedo Agw Sxjpfx Airerc Feed speed 10 m/min. total power requirement max. 6,1 kW kw Weight 1.400 kg

Condition: good (used), Year of construction: 2008, bore capacity in steel (diameter) 40.0 / 50.0 mm throat 320 mm bore stroke 160 mm turning speeds 70 - 4000 U/min table: 770 x 760 mm T-slots 3x 14 x 112 mm table height 780 mm distance spindle /table 988 / 304 mm bore spindles - Morse Taper 4 Kurzspindel MK feed 0.1-0.2-0.3-0.4 mm/U column diameter 145 mm engine output 1.5 / 2.4 kW weight 315 kg Podpfxo Agw Suo Airjrc Current new price approx. 20.000 euros Special price upon request Features: - Robust pillar drilling machine * ??Drive: V-belt – VARIO system * Height-adjustable drill head * Constant table height - Automatic spindle feed * With electromagnetic feed clutch * And electrical control via the feed handle * 4 feed rates: 0.1–0.2–0.3–0.4 mm/rev - Infinitely variable speed adjustment * With digital speed display - Multi-speed (pole-changing) drive motor - Clockwise rotation of the drill spindle - Coolant system with a separate tank - 1x machine vise * Jaw width 150 mm / opening width 160 mm - EMERGENCY STOP button on the front - Operating manual (PDF)

Condition: used, sheet width 3000 mm plate thickness 6 mm pre-bending 4 roll diameter 205 mm total power requirement 5 kW weight of the machine ca. 3,7 t dimensions of the machine ca. 4,0 x 1,4 x 1, 5 m Predpfx Aio Agw Sqsrsc Roundo 3-roll plate bending machine, featuring: - Hydraulic drop-end bearing and remote control - Conical bending attachment: a device for rolling cones and funnels.

Condition: used, Year of construction: 1990, Working width 520 mm Length of the planing table 3000 mm Number of knives 4 St. Motor output 4 kW Dimensions (L/W/H) 3000 x 1000 x 1200 mm weight of the machine ca. 850 kg cutting capacity 20 mm SCM F520 surface planer (jointer) Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Working width: 520 mm Cutterblock with straight knives Cutterblock diameter: 120 mm Cutterblock speed: 5000 rpm Number of planer knives: 4 Max. depth of cut: 20 mm Table height: 860 mm Pedpfo Agw Smsx Airjrc Motor power: 4 kW (5.5 hp) Available from stock, loaded onto transport

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 244500 € 600 to 6050 mm 4 (Y1, Y2, X, R) 365 mm 5100 mm 510 mm 700 mm hydraulisch 80 mm/s Prodpfx Ais Agw Siorec 6,5 mm/s 80 mm/s 1000 mm 350 mm/s 300 mm/s 250 mm 990 mm 154 mm 280 l 2 x 11 kW kW 7600 mm 2650 mm 3950 mm 52500 kg Standard equipment: 4 axes (Y1, Y2, X, and R) SVP (Servo Variable Pump) Technology SKY 22 CNC control - 21.5” Full HD graphic display with 2D and 3D visualization of the programmed workpiece - Intuitive touch-screen operation (easy drawing of the bending contour using your finger) - User-friendly, interactive programming in either 2D or 3D mode - 2D and 3D simulation of the bending process - Automatic tool selection in 3D mode - Automatic calculation of the developed length for sheet metal blanking - Automatic bending sequence calculation - Graphical product and tool library - Correction/adjustment capability - USB ports and Ethernet connection for importing, backing up, and exporting programs - Windows operating system - Support for importing IGES, STEP, and DXF files Servo-driven backgauge mounted on linear guides with ball screws spindles Backgauge finger blocks mounted on dual linear guides CNC-controlled crowning (anti-deflection system) Tool system Durma Without tools Fiessler AKAS laser safety system mounted on the upper beam Sheet support arms on linear guides Oil fill Operating manual in German or English, including CE Declaration of Conformity Options: Z1/Z2 axes, Delta X axis, or 6-axis backgauge Delem CNC control DA-66S or DA-69S CAD/CAM software Bending support system Angle measuring system And much more PRICE FCA TÜRKIYE

Condition: new, neu ca. 4 Monate ab Auftragse Türkei 20200 € 387.84 € Schwenkrahmen 3160 x 27 x 0,9 mm 15 - 120 m/min 270 mm 270 mm 340 x 240 mm rund 230, quadratisch 170 rund 150, quadratisch 100 rund 190, quadratisch 160 845 mm 1.1 kW 1.5 kW 2400 mm 1900 mm 1600 mm 920 kg DGS 270 model is the ideal model for mass production of solid material, tube and profile. Angular cutting is available between -45°/+60° degrees. Servo feeding system with bal screw reduces cutting tolerances to zero error marning. User friendly color touch screen PLC control panel allows to save 1 cutting program that can have 10 cutting steps. Hydraulic vice Hydromechanic band tension Pjdpfx Aio Agw Sfsrorc Saw band 27 mm Feeding vice 1000 mm stroke 1 programme with 10 steps Security switch Coolant pump Touchscreen control panel

Condition: good (used), Year of construction: 1997, x-travel 600 mm y-travel 450 mm z-travel 400 mm Control Heidenhain 430 ITNC tool taper SK 40 Prjdpfx Aj Agw Sboirjc voltage 400 V control voltage 24 V weight of the machine ca. 6 t - Operating hours: 48,690 - Spindle hours: 13,465 - Max. table load: 1,000 kg - Machine weight: 6,000 kg - Includes tool holders – SK40 - Includes all descriptions - Includes programming manual – Heidenhain - Includes 1 machine vice - Includes clamping claws

Condition: used, Year of construction: 1998, workpiece diameter with ratio 1:10 300 mm workpiece diameter with ratio 1:1 212 mm max. number of teeth 200 min. number of teeth 6 x-travel 300 mm X - Axis speed 0,1-5.000 mm/sec. y-travel 400 mm Y - Axis speed 0,1-5.000 mm/sec. A - axis -170 / +170 ° control Siemens Sinumerik 840 C total power requirement 38 kW weight of the machine ca. 10 t Psdpfxo Agw R Ts Airjrc dimensions of the machine ca. 4,20 x 2,20 x 2,10 m incl. suction

Condition: good (used), Year of construction: 1991, weight of the machine ca. ca. 6 t The design of the basic machine is characterised by the following features: - horizontal position of the workpiece spindle; vertical position of the milling spindle or milling head of the milling head - The workpiece is held between the workpiece headstock (left) and the tailstock (right). - the radial slide is mounted on the base (X-axis) - the axial slide moves on the radial slide (Z-axis) - the shift milling head is equipped with an automatic angle adjustment (A-axis); the shift slide (Y-axis) moves diagonally to the workpiece diameter - CNC controlled - IBH control - loading device - Many accessories Technical data: - largest milling module with hobs according to DIN 8002: 4.5 mm - largest milling module for high-performance milling: 3.0 mm - Number of teeth: 2 - 999 - max. workpiece diameter for manual loading: 200 mm - max. workpiece diameter for automatic loading: 150 mm - maximum workpiece length: 400 mm - largest / smallest milling cutter diameter: 102/40 mm - maximum cutter length: 230 mm - largest / smallest milling arbor diameter (standard): 32/16 mm - Axial slide path = largest milling length Z-axis: 300 mm - Radial slide path X-axis: 140 mm - Milling cutter shift path Y-axis: 100 mm - Milling stock path W-axis: 420 mm - Swivelling angle of shift milling head (left/right) A-axis: 50°/60° Predpe Agw R Nofx Airoc Milling coordinates: - Z-axis: 100 - 400 mm - X-axis: 1ß0 - 150 mm - Y-axis (end face of milling spindle): 50 - 230 mm - W-axis (face of tailstock spindle): 165 - 585 mm - Milling cutter speed range standard B-axis: 0 - 1500 rpm - Workpiece speed C-axis: 0 - 350 rpm Feed speeds: - X-axis: 3500 mm/min - Z-axis: 3500 mm/min - Y-axis: 4000 mm/min - W-axis: 5500 mm/min - V-axis (gantry loader): 80000 mm/min

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Prodpj Agw R Esfx Airsc Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, mileage: 97,400 km, power: 368 kW (500.34 HP), first registration: 02/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: black, gearing type: automatic, emission class: euro6, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, F-MAX LUXURY LED lighting package, Intarder, auxiliary heater, parking heater, TPMS (tire pressure monitoring system), Alcoa aluminum rims, roof light package with chrome bar, HORN AIR chrome, full trim, fully equipped, first owner, 3-year manufacturer's warranty, very well-maintained condition. Further technical data: Engine displacement: 12740 cm³ Emissions class: Euro 6 Environmental badge: 4 (Green) Color: black Interior features: * Adaptive cruise control * Auxiliary air conditioning * Air conditioning * Navigation system * Retarder/Intarder * Parking heater Safety & Environment: * ABS * ESP * Particle filter Vehicle description: Vehicle specification: * Engine: 500 hp * Emission standard: Euro-6 * Transmission: 12-speed automatic ZF Traxon Axles and wheels: Wheelbase: 3,600 mm Front axle: * Tire size: 385/55R22.5 * Brakes: Disc brakes * Suspension: Parabolic leaf spring * Load capacity: 8,000 kg Rear axle: * Tire size: 315/70R22.5 * Brakes: Disc brakes * Suspension: Air suspension with 2 air springs * Load capacity: 11,500 kg * Fifth wheel height: 1100 mm Special equipment Luxury Pack: Exterior: * Roof light package with chrome bar * HORN AIR chrome * Electric tilting cab * LED low beam headlights * Side skirts * Aluminum wheels * 1 tank 600 l * 2 tank 450 l * Fifth wheel height: 1,100 mm * Fog lights * Sun visor on the cab * Roof spoiler * Side spoiler * Rain sensor * Automatic headlights Interior: * 8-inch cluster display * Multimedia system with 7.2-inch touchscreen * Truck-specific navigation system * Refrigerator * Electric cab tilting mechanism * Parking heater * Auxiliary air conditioning * Climate control * Double armrest on the passenger seat * 2nd bed + storage compartments Technical features: * Cruise control * ADAPTIVE CRUISE CONTROL with ZF INTARDER Prsdps Agw I Aefx Airsc * LDWS (Lane Departure Warning System) lane keeping assist * AEBS (Advanced Emergency Braking System) emergency brake assist * EBS (Electronic Braking System) * ESP (Electronic Stabilization Program) * ASR (Anti-Slip Control) * ECO-Roll * Differential lock * Adaptive speed regulation * Max Cruise (Predictive Speed Control) * TPMS (Tire Pressure and Temperature Monitoring System) * ADR & smart tachograph * Truckconnect * Emergency brake assist HIGHLIGHTS & PACKAGES * ADPAB LUXURY PACK ENGINE, TRANSMISSION & CHASSIS * FD2AB Intarder LIGHT & VISIBILITY * FT22050 LED lighting TECHNOLOGY & SAFETY * FT22067 Auxiliary cooling incl. AGM battery 210 Ah * FT22042 Tire pressure monitoring system - (TPMS - Tyre Pressure & Temperature Monitoring System) Further features: * FT22069 CB radio antenna (antenna only) * FT_VA_BREIT Front axle 385/55, Rear axle 315/70 R22.5 * FT004 Warranty 3 (3 years from registration for the entire vehicle) * FTTANK Tank 600l right and 450l left * HORN AIR chrome * Roof light package with chrome bar * FT22019 Fifth wheel height 2 bellows air suspension (Catalog Height 1100mm) SAF 1.119, 1.147, C2AS, 315/70 R 22.5 Continental, 2.47, low rolling resistance Despite the utmost care, errors in the advertisement cannot be ruled out. We reserve the right to make changes and sell the vehicle subject to prior sale!

Condition: used, maximum load weight: 2,641 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 09/2025, Year of construction: 2025, Henra MT 353517 Machinery Transporter for construction equipment, etc. – new New, immediately available from stock. Permissible gross weight 3500kg. Transport area 3500 x 1700mm. Standard features include: * Bolted tubular drawbar with 2 different heights for overrun brake installation * Recessed lashing hooks in V-grooves in the loading area * Very low loading floor for easy driving on and off * 115 cm long loading ramp with sturdy drive-on aid and adjustable spring system * Loading ramp equipped with a robust and practical rotary latch (prevents tailgate rattling) Predpo Agw I Hefx Airjc * Heavy-duty bucket holder, also serves as a spare wheel bracket * Integrated LED side marker lights in side rail * LED front lights and LED contour lights * Sealed front section with tubular frame * Heavy-duty 18 mm plywood/wooden floor with anti-slip surface * Wheels 185/60R12 * Approved for 100 km/h * Despite the utmost care, errors in this listing cannot be excluded. We reserve the right of prior sale and to make changes!

Condition: used, Year of construction: 2024, operating hours: 49 h, Rampicar ROTAIR R70AE Tracked Dumper Tool Carrier, Year 2024, approx. 49 operating hours, as new Description: * Maximum undercarriage load capacity 800kg * Honda GX390 petrol engine with electric start * Mono joystick for drive control * Hydrostatic drive system * Separate drive motors for each side * Undercarriage with centrally mounted oscillating rollers * Mechanical emergency brake * Tipping skip with self-loading shovel * 1 free hydraulic circuit with control lever * Various attachments can be fitted optionally; see Rotair manufacturer’s brochure (link) Despite our utmost care, errors in this listing cannot be completely excluded. Subject to errors and prior sale! Podpfx Aj Agw I Usirjrc

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2018, total width: 2,550 mm, total height: 980 mm, Equipment: ABS, Krone ZZB18eLZ Dolly, Mega or standard axle, actively steered axle, SAF axles, 23,000 km, large Wabco Trailer Smart Board, first owner, like new. Psdpfxo Agw Ncj Airjrc Technical description: Frame as a double T-longitudinal beam with welded cross members, fifth wheel coupling, mounted on a turntable, overall height approx. 185 mm, underrun protection according to EC regulations. Drawbar for steered axle with bolted 50mm or 57.5mm drawbar eye, length when coupled low 4,150 mm, extendable by 4x100 mm, length when coupled high 3,500 mm, extendable by 3x100 mm (center of drawbar eye to center of fifth wheel plate). Front support with crank and gear. Actively steered dolly axle, low maintenance with disc brakes (430mm), offset 120, air suspension with lifting and lowering device, 1 valve, center hole centering. Tires: 4, size 445/45 R 19.5, manufacturer according to Krone's choice. Wheel covers according to EC directives 78/549/EEC and 91/226 EEC with corresponding splash protection device, black plastic mud flaps as quarter panels with upper tarpaulin cover, at the rear with mud flaps. Braking system according to ECE-R13, including vehicle stabilization function, spring brake parking brake, EBS system, 2S/2M, 2 sensors on one axle, diagnostics via ISO7638 connector (EBS supply cable), Palm coupling connections, brake connections for trailer on a strip in the frame. Lighting and signaling system according to ECE-R48, two 7-pole sockets DIN1185/3731, license plate, outline and side marker lights in LED design, multi-function tail lights including 1 rear fog light and 1 reversing light, electrical connections for trailer on a strip in the frame, connection cable for electrical and air connections (trailer). Steel parts shot-blasted, KTL-primed and powder-coated, standard paint finish (single-color), underrun protection and lighting carrier powder-coated in white, axles including wheel hubs in RAL 9005, components in black or galvanized, rims in silver, contour marking according to ECE-R48. Despite the greatest care, errors in the advertisement cannot be ruled out. Errors and prior sale are reserved!

Condition: used, mileage: 3,49,000 km, power: 130 kW (176.75 HP), first registration: 09/2007, fuel type: diesel, number of seats: 25, gearing type: mechanical, emission class: euro4, color: red, brakes: retarder, Year of construction: 2007, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), onboard kitchen, parking heater, soot filter, Equipment: Auxiliary air conditioning, refrigerator, coffee bar, individual lighting, jet outlets, ABS, ASR, retarder, CD, footrests, tables, microphone, air conditioning, auxiliary heating, radio, central locking, double side windows, power steering, electric mirrors, reclining seats, auxiliary heating Additional description: 2nd hand, very well-maintained interior, extensive interior fittings, serviced vehicle. Podpfs Agw Ngex Airsrc Despite the greatest care, errors within the advertisement cannot be ruled out. We reserve the right to make errors and to sell the vehicle prior to sale!

Condition: used, maximum load weight: 24,490 kg, overall weight: 30,000 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 3,000 mm, total width: 2,550 mm, total height: 3,990 mm, Year of construction: 2018, Equipment: ABS, Kögel Plane Mega Liner S 18 Edscha, hydraulic lift roof, color: white-black, 2-axle 2 axles Payload: 24,490 kg Tires: 445/45 R 19.5 SAF axles Edscha tarp Sliding tarp Hydraulic lift roof with a total lifting height of 500 mm Psdpfo Agw Nkox Airerc Floor 30mm thick, waterproof plate floor, cut edges sealed all around, continuous, waterproof bonding between chassis and floor plate with a durable, high-performance adhesive. Strength according to EN283, for floor loads up to a maximum of 7,000 kg forklift axle load. Premium visible sealing Accessories: Steel corner posts at the rear outside as a trapezoidal box, Delta rubber corner profile at the rear across the rear frame, pallet stop on the side rail, left, welded, approx. 20mm high Pallet stop on the side rail, right, welded, approx. 20mm high Steel front wall, continuous, with sturdy corner reinforcements, front wall reinforced on the inside with a screen-printed plate Loading area: 13620 x 2480 x 3000 mm Fifth wheel height unladen: 975 mm Multilock outer frame, universal cargo securing system every 100 mm Sliding step ladder at the rear Side marker lights in LED design 1 rear fog light 1 reversing light 10-year Krone manufacturer's warranty against rust-through Detailed construction description of the semi-trailer will be sent upon request. Tested cargo securing (EN 12642 XL)

Condition: used, axle configuration: 2 axles, first registration: 03/2025, next inspection (TÜV): 03/2027, loading space length: 3,320 mm, loading space width: 2,350 mm, loading space height: 600 mm, total width: 2,420 mm, total height: 410 mm, Year of construction: 2025, Vetter TRG 8120 / TRA 8120 Cable Drum Variable Trailer, 1 owner, low usage, not used on construction sites, as new condition. TRA 8120 tandem trailer for the Subduct Drum Frame TRG 8120: - Height-adjustable overrun drawbar with DIN towing eye and jockey wheel, including interchangeable ball hitch coupling. - 2 rear telescopic crank supports. - Floor made of phenolic resin-coated plywood with mounting points for securing the frame. - Ramp slot for inserting aluminum ramps. - No drop sides, no aluminum ramps included. - Trailer TÜV-certified. - Vehicle ID No.: WHC2PHTXXRN623360 Payload: 1200 kg Unladen weight (approx.): 800 kg Gross weight: 2000 kg Prodps Agw Nnofx Airec Drawbar load: 100 kg Platform internal width: 2350 mm Trailer overall width: 2420 mm Platform internal length: 3320 mm Maximum trailer overall length: 5550 mm Loading height: 600 mm Coupling height: 410 mm Tyres: 4x 195/55 Additional equipment: aluminum side panels, 300 mm high, including APR Board hinges, for trailer TRA 8120. Optional extras: Aluminum ramps 2500x600x55 mm, APR Ramp. Surcharge for 2 aluminum ramps, each 2500x300x55 mm, coarse, for trailer TRA 8120. - Permissible load per ramp pair: axle spacing 2.0 m = 1400 kg; axle spacing 1.5 m = 1400 kg; axle spacing 1.0 m = 1220 kg; single axle = 900 kg Net purchase price: €696.00 + 19% VAT TRG 8120, drum transport and 1 pay-off frame for up to 8 subduct drums on trailer TRA 8120 or on truck beds. The frame can also be placed on the ground at the worksite and the drums unwound. Drums from various manufacturers can be accommodated: - Up to 8 drums, diameter 1200 mm - Max. drum width: 440 mm - Max. payload: 2000 kg The frame is equipped with: - 2 lightweight aluminum drum axles - 6 spacers - 4 clamping collars for 2 shafts - 1 rear portal for deflection piping Advantages of the frame: - Usable on a range of vehicles - Can be placed directly on the ground - Fully disassemblable, bolted construction - Completely hot-dip galvanized and robust Technical data: Length: 2770 mm, Width: 2330 mm, Internal width: 2160 mm, Height: 770 mm, Weight approx. 277 kg Former net new price: €16,892 + 19% VAT Despite the utmost care, errors in this advertisement cannot be excluded. Errors and prior sale reserved!

Condition: used, mileage: 5,78,000 km, power: 355 kW (482.67 HP), first registration: 04/2020, fuel type: diesel, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, DAF XF 480 SSC Standalone air conditioning, full fairing, Super Space Cab, retarder/intarder, auxiliary heating, well maintained service record, overall well-kept condition. Special Equipment: EURO 6 engine Automatic climate control Stationary air conditioning: i-Park Auxiliary heater Fuel tank: 620 liters Additional fuel tank: 430 liters, aluminum Prsdpfxe Agw Nro Airoc Roof air deflector Fog lights Wheelbase variant: 3800 mm Fifth wheel coupling Upper bunk bed Lower bunk bed Side fairings Cab seats: luxury driver's seat, air-suspended Skylights in high roof External sun visor Central locking with remote control Despite our best efforts, errors in this advertisement cannot be excluded. Subject to mistakes and prior sale!